Jump to content
The simFlight Network Forums

elmond

Members
  • Posts

    14
  • Joined

  • Last visited

Profile Information

  • Gender
    Not Telling
  • Location
    Deutschland

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

elmond's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Yeah I am sorry about that then Thomas, Ijust tried to say how I felt on my end and ought have used other words. :( Shouting was also not my intent. Yeah it seems like the problem lies with the A2A aircraft I use. As soon as I have the axis calibrated the Comanche exhibits the behavior that the mixture can only be moved to 50%. The problem must be in the handling of the axis by for example the Comanche then. I was mistaken when I thought this happened with other planes as well. I did the different mixture calibrations just for demonstration purposes. It made it easier for me to test the values having one axis setup one way and one the other. The Comanche has the second axis not setup as it is a single engine plane and I thought I may use it for something else. Here is an accompanying log https://pastebin.com/Euf0Sjis I had my old config copied over but as I said, I had problems with one of the former FSUIPC 5 versions regarding the saving of profiles. Problem persisted mainly between keyboard and chair here me thinks. I did not check correctly with default aircraft. Thank you for looking into it. elmond
  2. @Thomas Richter /1 yes /2 https://pastebin.com/ThrcZ0YN /3 I'd am sorry but you come across really condescending to me. It felt the same way in my rebuy post, with all the red markings and such and now EXCLAMATION MARK, you NEED TO SHOW. Might be just me, but I'd really appreciate it if this were not the case. Otherwise I'd like to ask you to not answer to my posts anymore. @Pete Dowson Sadly this does not fix it for me. This was just from testing. The behaviour was there before. I have deleted my old FSUIPC5.ini and created a full new one for 5.121a as I had problems with the specific axis assignments under 5.11 or something. Only thing I added was the things to load. Apart from that I have not tinkered with the config See the below picture. I reset both axis. Then I tried to calibrate Mixture 1 to its minimum to no effect. After I press reset and then set I get the result, shown as in Mixture 2. For some odd reason I get 0 set as the default low. Standard p3dv4 flight. I cannot remember changing anything else on the system, hence I am so puzzled about it. It worked in V3 flawlessly. Thank you for looking into it.
  3. FSUIPC 5.121a I am somewhat at a loss here When I do not calibrate my mixture axis I can have the full range, so the mixture will go from 0 to 100 % in the sim (see mixture 2). As soon as I calibrate the mixture control (Mixture 1) I get an out of 0 if i move my mixture all the way back (in -16383). This results in the sim for the mixture to only go from 50% to 100%, so no leaning below 50. I need to calibrate though in order to use the reverse feature as otherwise my controls are physically the wrong way around. Any help is greatly appreciated, I am not able to figure this out by myself. elmond
  4. Yes, sure. I did not want to start an argument. Sorry. And 200€ come from all the other products I have that need updating. 170 for those and now 30 more for a new FSUIPC. And it is my own fault. I should have researched better before I bought. I somehow was unaware that there would be no update for a different fee. Otherwise I would have held back in May. My bad for buying when I felt going back to the hobby ;)
  5. And I am blind... five posts below me. Seems I am boned. Seeing as upgrading to v4 will clock in at over 200€ with that, not including v4, I will stick with v3 then. Topic can be closed or deleted. Thnx.
  6. Hi, this has probably been asked before, but do I have to do a full rebuy for v4? I bought FSUIPC on the first of May this year and spent a month getting it to work properly with my HOTAS (thnx saitek :P). I appreciate the work that has gone into the product, but a month and a half of usage feels kind of bad. Is there any update possibility or do I have to add that to the costs p3d v4 is already having in store for me?
  7. Probably not, maybe the Vendor ID can help you out? Nevertheless, I am happy for now. I was telling myself for so long how I did not need your product, boy was I wrong :) Have a nice vacation and feel free to contact me, if I can be of any help. seb
  8. I am a noob :) I had uninstalled and reinstalled the driver.... This time more of the guid had changed and it was not just changing the numbers. Changing it to the value in Calibration\1 did the trick. My new entries were for the Throttle [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0738&PID_A221] [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0738&PID_A221\Calibration] [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0738&PID_A221\Calibration\0] "GUID"=hex:30,f1,7a,bf,7b,1c,e7,11,80,01,44,45,53,54,00,00 "Joystick Id"=hex:01,00,00,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0738&PID_A221\Calibration\0\Type] [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0738&PID_A221\Calibration\1] "GUID"=hex:90,db,7b,bf,7b,1c,e7,11,80,04,44,45,53,54,00,00 "Joystick Id"=hex:02,00,00,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0738&PID_A221\Calibration\1\Type] [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0738&PID_A221\DeviceInstances] "7&607925A&0&0000"=hex:02 "7&121B43D7&0&0000"=hex:02 So I changed the 1.GUID={BF7AF130-1C7B-11E7-8001-444553540000} to 1.GUID={BF7BDB90-1C7B-11E7-8004-444553540000} started up p3d and guess what, it works. Sans the extra buttons of course :P
  9. Ah I am too retarded. Wait one. I think changing the guid will work.
  10. Yeah this was with the software running. Windows will not pick up the switches when it is not installed. I swear it did before the creators update, but I might be mistaken. The calibration dialog of windows will only work with the saitek drivers not installed. The GUID change was overwritten by FSUIPC every time I opened the dialogue. So I set the ini to write protected, changed the GUIDS and it was not picking up the axes either. If it is standard procedure to remove the driver, then I'll just live with the 32 buttons :)
  11. No it does not work at all, as long as I have the Saitek drivers installed. If I go to the device manager, uninstall the device including drivers and then replug/ reboot and use the generic driver it'll work, just without the 4 extra buttons. And these are gone then for other applications as well then of course. And yes, there are really 32 buttons on the device apart from the mode switch and the "slider" I mentioned. And I use them all because of a vr head set :) I was expecting something like set.Buttons(get.maxNumberOfButtons) but if it is coded differently then that is just the way it is :P I will mail the reg excerpt shortly.
  12. Hi, I am on a Win 10 64bit install and I just bought FSUIPC. I could not get my controllers (x56) to show up in FSUIPC until I uninstalled the Saitek drivers. The Joystick was working fine before in P3D. Now I cannot program the mode switch or the slider button on the throttle, as it is not available with the default driver. Does anyone have the Saitek Driver (not the programming software) working with FSUIPC? What could I be missing?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.