romair

Hello Experts I installed FSUIPC6 into C:\Users\User\Documents\Prepar3D v5 Add-ons. I installed the Aerosoft Airbus A330 and after installed I started to connect SAITEK throttle lever with FSUIPC6. I could not find any solution to get both throttle levers working in the same way as it is working well in my P3Dv4 where FSUIPC5 is installed into the moduls folder as usual. For the reverser function in the P3Dv4 I am working with the nessary lua files. I also copied those lua files into FSUIPC6 located in the Prepar3D v5 Add-ons. But still I found no way to connect the throttle lever same as in the P3Dv4. After a little frustration I had the idea to copy the whole FSUIPC5.ini into my FSUIPC6 and I renamed this file to FSUIPC6.ini where I have all aircraft profiles from my P3Dv4. Very surprising, all profils works well as long as I have already installed P3Dv5 native aircrafts. The AS Airbus 318-319-320-321-330 P3Dv5 aircafts have now proper working SAITEK throttle lever including the reverser. Propably an expert can comment my positive experience. The remaining question is: wether it would be better to install FSUIPC6 on the same Modul folder as used in older P3D versions and what is the reason that the necessary Airbus lua files can not be adapted. Thanks for response and regards Roger

Hello experts Sorry for the delay of my response. I was outside for a few days. After my return and open the P3D sim the FSUIPC works now as in the past time. Therefore its not necessary to send you the FSUIPC log files. Next time I will send you the file as requested. Thanks and regards Roger

Hello Experts FSUIPC (on P3D v4) does no more recognize SAITEK Rhino stick. The Rhino throttle are recognized and works well. If we try to adapt aileron or elevator no response within the FSUIPC. We did a reinstall with the latest FSUIPC but still the same problem. The Rhino driver are proper installed and the P3D v4 controls works well when connected within the P3D. What could be the reason that FSUIPC rcognizes only the throttle of SAITEK Rhino ?? Thanks and regards Roger

Dear Thanks for immediate response. I just can confirm that I have never overwritten the FSUPIC installation with a re-install. I really deleted the modul folder first the be empty . Due to the newly installed P3D Version 3.0 at that time the modul folder contained only the FSUPIC installation. I have already turned off the logging tab. Anyway have many thank to push me to observe und to send you the logging file which I had only recognised due to your high expert knowledge. regards Roger

Pete Thanks for your outstanding Support. I deleted the all the aircraft specific profiles awithin the FSUIPC.ini and started to apply the main rudder and button again and I tested and the problem became solved. I was really surprised because several times a made a new install of FSUPIC from the scratch but the problem caused by pressing the left button causing to Close P3D was still going. Now it Looks perfect. Can you please verifiy my last copy of the logging file and reponse if there is a wrong sentence. ********* FSUIPC4, Version 4.948c by Pete Dowson ********* Prepar3D.exe version = 3.0.10.14945 Reading options from "C:\Program Files\Prepar3D v3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 8.0 Module base=58440000 User Name="" User Addr="" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 47 System time = 08/12/2015 16:15:16 47 FLT path = "C:\Users\User\Documents\Prepar3D v3 Files\" 47 ------ Module Version Check ------ 47 acontain.dll: 3.0.10.14945 47 api.dll: 3.0.10.14945 47 controls.dll: 3.0.10.14945 47 fs-traffic.dll: 3.0.10.14945 47 G3D.dll: 3.0.10.14945 47 sim1.dll: 3.0.10.14945 47 visualfx.dll: 3.0.10.14945 47 weather.dll: 3.0.10.14945 47 window.dll: 3.0.10.14945 47 ---------------------------------- 47 Trying C:\Program Files\Prepar3D v3\Modules\SimConnectP3D2.dll 47 Found it: trying to connect 62 FS path = "C:\Program Files\Prepar3D v3\" 203 ---------------------- Joystick Device Scan ----------------------- 203 Product= Saitek Pro Flight Quadrant 203 Manufacturer= Saitek 203 Vendor=06A3, Product=0C2D (Version 2.1) 203 Serial Number= Saitek 219 Product= Pro Flight Cessna Yoke 219 Manufacturer= Saitek 219 Vendor=06A3, Product=0BD3 (Version 1.22) 219 Serial Number= RD008479 219 Product= Saitek Pro Flight Rudder Pedals 219 Manufacturer= Saitek 219 Vendor=06A3, Product=0763 (Version 1.0) 219 Serial Number= Saitek 219 Product= Pro Flight Cessna Trim Wheel 219 Manufacturer= Saitek 219 Vendor=06A3, Product=0BD4 (Version 1.6) 219 Serial Number= RD003754 219 ------------------------------------------------------------------- 234 LogOptions=F0000000 00000011 234 ------------------------------------------------------------------- 234 ------ Setting the hooks and direct calls into the simulator ------ 234 --- CONTROLS timer memory location obtained ok 234 --- SIM1 Frictions access gained 234 --- FS Controls Table located ok 234 --- Installed Mouse Macro hooks ok. 234 --- Wind smoothing fix is installed 234 --- All links okay (except older global weather setting method) 234 ------------------------------------------------------------------- 234 SimConnect_Open succeeded: waiting to check version okay 234 Trying to use SimConnect Prepar3D 8094 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N 8094 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0) 8094 Initialising SimConnect data requests now 8094 FSUIPC Menu entry added 8109 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y 8109 C:\Users\User\Documents\Prepar3D v3 Files\Maule LSZH RWY28.fxml 8109 C:\Program Files\Prepar3D v3\SimObjects\Airplanes\Maule_M7_260C\Maule_M7_260C.air 8265 Memory in use: 735Mb, Avail=3361Mb 68531 Memory in use: 1669Mb, Avail=2427Mb 71640 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N 72609 System time = 08/12/2015 16:16:29, Simulator time = 16:15:19 (15:15Z) 72609 Aircraft="Maule M7 260C" 76984 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y 77703 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N 80515 Starting everything now ... 80562 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 81875 Advanced Weather Interface Enabled 87078 *** EVENT: Cntrl= 65758 (0x000100de), Param= 0 (0x00000000) FLAPS_INCR 87109 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16384 (0xffffc000) AXIS_THROTTLE_SET 87125 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -16384 (0xffffc000) AXIS_PROPELLER_SET 87125 *** AXIS: Cntrl= 66292 (0x000102f4), Param= -16384 (0xffffc000) AXIS_MIXTURE_SET 90625 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW 91078 *** EVENT: Cntrl= 65567 (0x0001001f), Param= 0 (0x00000000) VIEW_MODE 94578 *** EVENT: Cntrl= 65759 (0x000100df), Param= 0 (0x00000000) FLAPS_DECR 95672 *** EVENT: Cntrl= 65759 (0x000100df), Param= 0 (0x00000000) FLAPS_DECR 96781 *** EVENT: Cntrl= 65759 (0x000100df), Param= 0 (0x00000000) FLAPS_DECR 106437 *** EVENT: Cntrl= 65732 (0x000100c4), Param= 0 (0x00000000) EXIT 107078 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y 107078 Sim stopped: average frame rate for last 29 secs = 29.0 fps 115781 === NOTE: not calling SimConnect_Close ... 116781 System time = 08/12/2015 16:17:13, Simulator time = 16:15:47 (15:15Z) 116781 *** FSUIPC log file being closed Minimum frame rate was 27.8 fps, Maximum was 29.9 fps Minimum available memory recorded was 2110Mb Average frame rate for running time of 34 secs = 26.5 fps Memory managed: 16 Allocs, 16 Freed ********* FSUIPC Log file closed *********** Again thanks and regards Roger

Dear Pete This is my next logging file without weather logging. I deleted Abort within the FSUIPC button controll. Anyway P3D still Closes when use the left button on the throttle Quadrant. ********* FSUIPC4, Version 4.948c by Pete Dowson ********* Prepar3D.exe version = 3.0.10.14945 Reading options from "C:\Program Files\Prepar3D v3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 8.0 Module base=59A30000 User Name="" User Addr="--" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 47 System time = 08/12/2015 12:36:24 47 FLT path = "C:\Users\User\Documents\Prepar3D v3 Files\" 47 ------ Module Version Check ------ 47 acontain.dll: 3.0.10.14945 47 api.dll: 3.0.10.14945 47 controls.dll: 3.0.10.14945 47 fs-traffic.dll: 3.0.10.14945 47 G3D.dll: 3.0.10.14945 47 sim1.dll: 3.0.10.14945 47 visualfx.dll: 3.0.10.14945 47 weather.dll: 3.0.10.14945 47 window.dll: 3.0.10.14945 47 ---------------------------------- 47 Trying C:\Program Files\Prepar3D v3\Modules\SimConnectP3D2.dll 62 Found it: trying to connect 62 FS path = "C:\Program Files\Prepar3D v3\" 203 ---------------------- Joystick Device Scan ----------------------- 219 Product= Saitek Pro Flight Quadrant 219 Manufacturer= Saitek 219 Vendor=06A3, Product=0C2D (Version 2.1) 219 Serial Number= Saitek 219 Product= Pro Flight Cessna Yoke 219 Manufacturer= Saitek 219 Vendor=06A3, Product=0BD3 (Version 1.22) 219 Serial Number= RD008479 219 Product= Saitek Pro Flight Rudder Pedals 219 Manufacturer= Saitek 219 Vendor=06A3, Product=0763 (Version 1.0) 219 Serial Number= Saitek 219 Product= Pro Flight Cessna Trim Wheel 219 Manufacturer= Saitek 219 Vendor=06A3, Product=0BD4 (Version 1.6) 219 Serial Number= RD003754 219 ------------------------------------------------------------------- 234 LogOptions=F0000000 00000011 234 ------------------------------------------------------------------- 234 ------ Setting the hooks and direct calls into the simulator ------ 234 --- CONTROLS timer memory location obtained ok 234 --- SIM1 Frictions access gained 234 --- FS Controls Table located ok 234 --- Installed Mouse Macro hooks ok. 234 --- Wind smoothing fix is installed 234 --- All links okay (except older global weather setting method) 234 ------------------------------------------------------------------- 234 SimConnect_Open succeeded: waiting to check version okay 234 Trying to use SimConnect Prepar3D 8062 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N 8078 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0) 8078 Initialising SimConnect data requests now 8078 FSUIPC Menu entry added 8094 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y 8094 C:\Users\User\Documents\Prepar3D v3 Files\Maule LSZH RWY28.fxml 8094 C:\Program Files\Prepar3D v3\SimObjects\Airplanes\Maule_M7_260C\Maule_M7_260C.air 8125 Memory in use: 679Mb, Avail=3417Mb 68640 Memory in use: 1473Mb, Avail=2623Mb 83875 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N 84281 System time = 08/12/2015 12:37:48, Simulator time = 12:36:27 (11:36Z) 84281 Aircraft="Maule M7 260C" 86281 Starting everything now ... 86281 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 86406 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y 86906 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 87844 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW 88078 Advanced Weather Interface Enabled 92844 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16384 (0xffffc000) AXIS_THROTTLE_SET 92844 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -16384 (0xffffc000) AXIS_PROPELLER_SET 92844 *** AXIS: Cntrl= 66292 (0x000102f4), Param= -16384 (0xffffc000) AXIS_MIXTURE_SET 92844 Button changed: bRef=0, Joy=0, Btn=0, Pressed 92844 [buttons.Maule M7 260C] 0=P0,0,C0,0 93078 Button changed: bRef=0, Joy=0, Btn=0, Released 117515 Button changed: bRef=0, Joy=0, Btn=1, Pressed 117515 [buttons.Maule M7 260C] 2=P0,1,C65733,0 117515 FS Control Sent: Ctrl=65733, Param=0 117515 *** EVENT: Cntrl= 65733 (0x000100c5), Param= 0 (0x00000000) ABORT 118187 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y 118187 Sim stopped: average frame rate for last 31 secs = 29.7 fps 129500 === NOTE: not calling SimConnect_Close ... 130500 System time = 08/12/2015 12:38:35, Simulator time = 12:36:57 (11:36Z) 130500 *** FSUIPC log file being closed Minimum frame rate was 27.3 fps, Maximum was 29.9 fps Minimum available memory recorded was 2131Mb Average frame rate for running time of 33 secs = 29.5 fps Memory managed: 19 Allocs, 19 Freed ********* FSUIPC Log file closed *********** Hope for your rResponse and regards Roger

Hello Pete Thanks for your Support. I kopied your FSUIPC.dll into my P3D but the same result. P3d crashes when using the left button of the SAITEK throttle quadrant. Here is the log Content: ********* FSUIPC4, Version 4.948c by Pete Dowson ********* User Name="changed by user1" User Addr="changed by user" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 140563 System time = 08/12/2015 07:44:57, Simulator time = 07:42:44 (06:42Z) 140563 FLT path = "C:\Users\User\Documents\Prepar3D v3 Files\" [Continuation log requested by user] Running inside Prepar3D v3 on Windows 8.0 Module base=586B0000 140563 LogOptions changed, now F0000000 0000001F 141063 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 141094 Weather Read request (Global set) to area 1: ICAO="GLOB", Req=0 141094 Weather Received (type 1 request, (null)): "GLOB&A0 000000Z 30110KT&D900NG 300V302 30125KT&A1026LG 295V307 80KM&B-423&D3048 1CU033&CU001FLLN000N 8CI328&CI001FNMN000L 18/12 05/04&A1026 Q0999 @@@ 34 5 301 25 | " 141094 WX Received in (0 mSecs), WX request type 1, ICAO=GLOB 141094 Results: FS98 Pressure=999.5 mb 141094 Results: FS98 Wind0: ground (1417ft) to -1410ft AGL, dir 0M, vel 0, gust 0, turb 0 141094 Results: FS98 AmbientWind at PlaneAlt=1417: dir 301T, vel 10 141094 Results: FS98 CurrTemp at PlaneAlt=1417: 13C 142094 *** AXIS: Cntrl= 65762 (0x000100e2), Param= 64 (0x00000040) AXIS_ELEVATOR_SET 143109 Weather Read request (Nr Station) to area 5: Lat=47.46, Lon=8.57, Alt=0.0, Req=1 143109 Weather Received (type 5 request, Nearest): "LSZH&A432 300700Z 30110KT&D0NG 300V302 30124KT&A594NG 295V306 80KM&B-855&D3048 1CU019&CU001FLLN000N 8CI314&CI001FNMN000L 18/12 05/04&A594 Q0999 @@@ 34 5 301 24 | " 143109 WX Received in (0 mSecs), WX request type 5, Lat=47.4566, Lon=8.5699, Alt=0.0m 143109 >Change: FS98 Vis: range =0sm, (raw value=0) 143109 >Change: FS98 Temp0: to 1420ft, Day 0.0C, NightVar 0.0C 143109 >Change: FS98 Dewpoint Control: disabled 143109 >Change: FS98 Precip Control: disabled 145422 Weather Read request (At Aircrft) to area 4: Lat=47.46, Lon=8.57, Alt=432.8, Req=2 145422 Weather Received (type 4 request, Interpolated): "????&A0 080642Z 30110KT&D0NG 300V302 80KM&B-423&D3048 1CU033&CU001FLLN000N 8CI328&CI001FNMN000L 12/08 Q0999 " 145422 WX Received in (0 mSecs), WX request type 4, Lat=47.4566, Lon=8.5699, Alt=432.8m 147516 *** EVENT: Cntrl= 65752 (0x000100d8), Param= 0 (0x00000000) PARKING_BRAKES 147594 Weather Read request (Nr Station) to area 5: Lat=47.46, Lon=8.57, Alt=0.0, Req=1 147594 Weather Received (type 5 request, Nearest): "LSZH&A432 300700Z 30110KT&D0NG 300V302 30124KT&A594NG 295V306 80KM&B-855&D3048 1CU019&CU001FLLN000N 8CI314&CI001FNMN000L 18/12 05/04&A594 Q0999 @@@ 34 5 301 24 | " 147594 WX Received in (0 mSecs), WX request type 5, Lat=47.4566, Lon=8.5699, Alt=0.0m 147594 >Change: Pressure=999.0 mb 147594 >Change: Surface wind: to alt=1420ft, dir=301T, vel=10.0, gust=0.0, turb=0, shear=0, var=2.0 147594 >Change: Wind layer 1: to alt=6365ft, dir=301T, vel=10.0, gust=0.0, turb=0, shear=0, var=2.0 147594 >Change: Visibility[0]: range=49.7sm (80000m), from=-1380ft, to=8610ft 147594 >Change: Cloud[0]: type=9, from 3300ft to 7300ft (+/- 0ft), cover=1, turb=1, topshape=0 147594 >Change: Precip=0, base=0ft, rate=0, icing=0 147594 >Change: Cloud[1]: type=1, from 32800ft to 33000ft (+/- 0ft), cover=8, turb=0, topshape=0 147594 >Change: Precip=0, base=0ft, rate=0, icing=2 147594 >Change: Temperature[0]: alt=1420ft, Day=12.0 C, NightVar=0.0 C, DewPt=8.0 C 147594 >Change: Temperature[1]: alt=3366ft, Day=5.0 C, NightVar=0.0 C, DewPt=4.0 C 147594 Results: FS98 Wind0: ground (1417ft) to 0ft AGL, dir 299M, vel 10, gust 0, turb 0 147594 Results: FS98 Wind1: 1420ft to 6365ft AMSL, dir=300T, vel 10, gust 0, turb 0 147594 Results: FS98 Vis: range =50sm, (raw value=4971) 147594 Results: FS98 Cloud1: type=9, from 3300ft to 7300ft (+/- 0ft), cover 1, turb 72, ice 0 147594 Results: FS98 Cloud2: type=1, from 32800ft to 33000ft (+/- 0ft), cover 8, turb 0, ice 2 147594 Results: FS98 Temp0: to 1420ft, Day 12.0C, NightVar 0.0C 147594 Results: FS98 Temp1: to 3366ft, Day 5.0C 148016 *** EVENT: Cntrl= 65752 (0x000100d8), Param= 0 (0x00000000) PARKING_BRAKES 149344 Button changed: bRef=0, Joy=0, Btn=0, Pressed 149344 [buttons.Maule M7 260C] 0=P0,0,C65603,0 149344 FS Control Sent: Ctrl=65603, Param=0 149344 *** EVENT: Cntrl= 65603 (0x00010043), Param= 0 (0x00000000) FLAPS_DOWN 149344 *** EVENT: Cntrl= 65758 (0x000100de), Param= 0 (0x00000000) FLAPS_INCR 149672 Button changed: bRef=0, Joy=0, Btn=0, Released 149672 [buttons.Maule M7 260C] 3=U0,0,C65759,0 149672 FS Control Sent: Ctrl=65759, Param=0 149672 *** EVENT: Cntrl= 65759 (0x000100df), Param= 0 (0x00000000) FLAPS_DECR 149781 Weather Read request (Global set) to area 1: ICAO="GLOB", Req=0 149781 Weather Received (type 1 request, (null)): "GLOB&A0 000000Z 30110KT&D900NG 300V302 30125KT&A1026LG 295V307 80KM&B-423&D3048 1CU033&CU001FLLN000N 8CI328&CI001FNMN000L 18/12 05/04&A1026 Q0999 @@@ 34 5 301 25 | " 149781 WX Received in (0 mSecs), WX request type 1, ICAO=GLOB 150484 Button changed: bRef=0, Joy=0, Btn=1, Pressed 150484 [buttons.Maule M7 260C] 2=P0,1,C65733,0 150484 FS Control Sent: Ctrl=65733, Param=0 150484 *** EVENT: Cntrl= 65733 (0x000100c5), Param= 0 (0x00000000) ABORT 151156 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y 162547 === NOTE: not calling SimConnect_Close ... 163547 System time = 08/12/2015 07:45:20, Simulator time = 07:42:54 (06:42Z) 163547 *** FSUIPC log file being closed Minimum frame rate was 27.7 fps, Maximum was 28.8 fps Minimum available memory recorded was 2078Mb Average frame rate for running time of 20 secs = 24.1 fps Memory managed: 10 Allocs, 10 Freed ********* FSUIPC Log file closed **

Dear Pete and P3D experts I installed P3D Version 3.0 without addon airplanes. I installed and registered your last FSUIPC 4.948 suitable for P3D-3.0 I can adapt all SAITEK controller using FSUIPC but remaining one serious trouble causing P3D to Crash. On the SAITEK throttle quadrant, the left (using for the flaps) of the three button causes P3D crash but the middle and the right one does not make any problem and also the 3 levers works well. If I de-install FSUIPC and if I switch the throttle buttons withhin the P3D menue the P3D does not Crash. I appreciate your help. Thanks and regards Roger