Jump to content
The simFlight Network Forums

capbat

Members
  • Content count

    28
  • Joined

  • Last visited

Community Reputation

0 Neutral

About capbat

  • Rank
    Member

Profile Information

  • Gender
    Male
  • Location
    Canada
  1. Hi Volker. I did intentionally installed P3D in the P3D directory instead of the default place. After reading on the internet that it was better to not install it at the default location, because it was causing a lot of problem. I am sure you have seen these comments published in all sort of forums on the net. Are you suggesting that I would have to Uninstalle everything and re-install at default location? PS: I noticed that the Scenerey Library Path on the right pan on your picture is not pointing at the same place that my picture was pointing to. I checked if c:\ProgramData\LockheedMartin\P3D v3 existed on my setup and it does. So I pointed the pane on the right to that location with FSCDBManager and it worked!!!. So I guess the problem is solved. Thanks.
  2. Hi. I am in the process of rebuilding my system. SetUp 1 - P3D v3 2 - FSPUIC V4 3 - Not on an Internal Netword 4 - FSC Ver 9.6 Rev 7 Build 20 May 2016 5 - No Airac 6 - Bought on SimMarket in 2011 Order No 791874 7 - Windows 10 / 64 8 - 3 Monitors. P3D is installed in C:\Prepar3D v3 and FSC is installed in C:\FSC96 I can not find the proper directory to enable the "Update Airports from Prepar3D" Button. Please advise. Thanks. S.L.
  3. Ok thank I have found the problem was with my UAC and my Anti virus software. Case close. Thanks.
  4. Hi. I Recently Reinstalled P3D v3 on new computer. And I am now in the process of re-installing all the software I had. IE: Utilities, Airports, Aircrafts etc. I bought FSUIPC4 on SimMarket in 2013. So I redownloaded FSUIPC4 from my Order page at SimMarket. When I am running (as administrator) the Install FSUJIPC4.exe I am getting the following error. "Windows cannot access the specified device, path, or fil. You may not have the appropriate permissions to acces the item." I tried to move the Install file to the desktop with same result. Any suggestions. Thanks. Bat
  5. Hi Volker My Setup. 1. FS X, FS2004(FS9) or Prepar3D (Version) = p3d Version 3.4.14.18870 SimConnect Version 3.4.0.0 2. FSUIPC* / WideFS which version used ("latest version" is not sufficient) = Version FSUIPC 4 v 4.958 3. I use the FSC in a network! = No 4. FS Commander and Database Manager = FSC V 9.6 Rev. 7 Build: 30-May-2016 FCDB = Vers. 9.6 Rev. 7 Buiold: 20 May-2016 5. Which provider and period of the AIRAC Cycle Navigraph Airac-1612 Rev. 1 Nov10-DEC07/16 6. Aerosoft boxed or download version or download version from our website = Downloaded Version 7. Operating System (Windows 7/8/10 32/64, Vista 32/64, XP, 2000) = Windows 10 home 8. How many monitors are used = 3 You see I have done my homework. :-) I have FlyTampa Montréal and Toronto (CYUL CYYZ) Airports. My aircafts don't show exactly where they should be. See Attachement. Thanks for your Help. Bat
  6. I am with latest version of FSC I am having problems reading information on maps specificly when I put my cursor over a VOR and leave it there a blue box appears and the information is very difficult to read, the font is very small. Is there a way to increase the size of the fonts, whitout going througt the dispaly settings, because if I enlarge it there all the other apps are enlarged and the problem is on the other apps having to big screen real Estate. Thanks for you help., Ing. Capbat
  7. Hi . ATTENTION Volker. I have updated to Windows 10 and in the process I scrapted FSX and all of my PMDG aircrafts. I have lost some other Items to including FSC. Can I download a version I have a paid copy and I am registered. I can submit all personal info via PM. Thanks Bat
  8. Hi All This might have been asked before but I did make a search here whitout a specific answer. I have recently downloaded the Free CYWG Airport scenery. I see that the airport layout in FSC is no longer valid when I zoom to airport level. I assume that FSC is not responsible for this. My question is, is there a way for me to add to FSC my new Airport layout with latest AFCAD, I believe they are in the .BGL files?. So here we go Volk, probably an easy one for you. ;) Thanks Bat PS: After another search I have found the answer, simply Execute Flight Sim Commander Database manager. SOLVED.
  9. Thanks Volker Works perfectly now, as usual a fast and efficient service. :razz: Bat
  10. Hi Volk. 1. FSX with latest Patch 2. FSUIPC Paid Version 4.938a 3. FS Commander and Database Manager Version 9.5 Build 4 January 2014. Navigraph AIRAC Cycle 1501 Installed with Navigraph FMS Data Manager 5. Aerosoft download version 6. Operating System (Windows 7/64) I was not having this problem yesterday, but today I downloaded the Navigraph Airac 1501 and installed it using Navigraph FMS Data Manager installed it to all my add ons including FSC. Now the flight plan section is acting up. I can't access the New Flight Plan When I click on Show Flight Plan Icon it gives me Rune-time error 9: Subscript out of range error and when I click the OK Button to acknowledge it crashes. If I try to open an already made Flight Plan it opens it but the system cursor keeps on spinning while I hover the FSC application and if I clcik on anybutton while the cursor is still spinning I get the message that FSC (Not Responding) Maybe I could go back to the previous version of the Database I think Navigraph Data Manager did do a Back Up and offers the opportunity to get it back. Anyone else had this problem? Any Suggestions? Thanks Bat
  11. Hi Volker. I have been emailing you for a couple of days about my problems with my registrations. I have figure out after reading a old post here when I asked you a similare question. Quote In your case, use the full version: http://fscommander.com/files/fsc93.zip 1 Make a backup of the files "register.fsc, fsc.ini, fsccolor.ini" and if necessary your flight plans 2 Uninstall the old version and then delete the folder FSC 3 Install the latest version 4 Restore the backed up files 5 Run the DataBaseManager before you run your FlightSim Commander Regards, Volker Can I use the same procedure to upgrade fromo 9.3 to 9.5? Thanks Sorry about the previous Email I should have done my homework. ;-) Bat
  12. Upgrading to FSC 9.3

    After looking all over I found where I bought it it was at SimMarket Invoice no 655874 It was for version 8 but I have upgraded later to V 9.xx Do yu still need the SUPPORT folder? Thanks Bat
  13. Hi All. For some reason I can't add an approach to one of my aircraft B777-200 I have added all the others Start-up Taxi Takeoff climb and Cruise but when I get to the Approach-Landing section I can only add the descent when I click on Approach I get an empty page and an invitation to Add Approach (Green button at bottom of screen) When I click on it I get the 777-200 /Descent-Approcah-Landing/ Approach Checklist, I the type some list Item. Click the Apply Changes button and then answer yes to the Confirmation window. But nothing gets inserted in the list and I am back to the empty list with the Green Button at bottom to Add Approach. Any Suggestions? Bat
  14. Upgrading to FSC 9.3

    Hi Volker I am in the same situation as Scoot Here are my infos: FSX sp 2 FSUIPC 4.745 FSC 9.1.1 Not sure either about Aerosoft I have some aircrafts from them I don't Have AES. Window 7/64 Thanks Bat.
×