Ahmed Y. Hamad

Hi Pete I have a problem with my PFC Throttle Quadrant when flying Aero-sof Airbus A320 Extended. the Throttle never came to idle and I never hear the "tick" of the Idle dent !! this is greatly affecting the landing as the bus kept saying retard retard and even when I press F1 to cut the throttle, and as a result of the throttle position of the PFC one, the reverse never engaged after landing....u can imagine the situation !!! I have tried to calibrate the throttle inside FSUIPC as well as outside with no success....Appreciating your help really. Attached id the FSUIPC.ini and some screenshots Thanks in advance. Ahmed FSUIPC4.rar ini file after landing THR LVR in PFD after moving Throttle back, no idle after press F1 for short time

Thanks Pete for ur reply Will try this when being back home. it seems that I have missed somthing regarding that delta. I will check that. Will be back to you ASAP. Thanks in advance Mavi

Good morning Pete, I’m facing such a minor problem with my PFC Throttle Quadrant that is the separate reverse arm is not responding properly when it’s moved. I mean that when I’m moving the arm, the FSX throttle is not going to the reverse position or sometimes they went differentially and start going ups and down. I don’t really know what the problem is and I’m seeking your help. Attached is my INI file , and my system is W7 FSX Thanks in advance. Regards Mavi FSUIPC4.rar

Yeah :D, this post was my first on the site and it was need an approval, so I made a new topic :D I do appreciate your help Pete thanks really mavi

A BIG YES :) and a BIG THANKS also Pete :) Regards mavi

Hi Pete A good day really :) it works very well !!!! The new version 4.714 works very well :) I think that there was something wrong with the old version N.B: Logitech Extreme 3D is the stick of the aircraft. :) I Do appreciate your great help Pete Thanks Regards mavi

Pete, FSX see the axes, the assign axes tab don't show any axes to be assigned....This is the problem for me. I will give you an example: Thrott 1 its working with FSX (and assigned via FSX controls) very good, its not seen in the FSIUPC assign axes tab at all....that tab shows nothing even if I press rescan several time with arm movement. my point is: what is wrong with my assign axes tab??? why it is showing nothing. I will wait until being back home to do the trial Thanks mavi

Yes Pete I know that, as I said above, that axes assining tabe dosen't work at all and remains gray Will go today through a trail when I'm back home, will see what will Happened mavi

No they didn't :S Hope to do so really.....my problem as described in the first post was that I couldn't use the axis assigning in the Prog:- . Hope to do it today after the updates!!! its seen by windows not FSX, in FSX there are no options to assign separate reverse arm....so when I went to FSIUPC Calibrations, all the axis were getting IN and OUT but not the separate reverse arm...this is the problem YES....coz when I'm applying a full thrott....it becomes up to ARM !!!! good advice really....I will do it in the air today Thanks Pete Regards mavi

Good day Pete That console looks good really, but with serial ports? How difficult was that: D Actually my PFC Console came only with a small sheet instructed me to how calibrate the device through windows….and nothing more !!!! I have went through those calibration via windows (I’m using 7) and works very nice as per PFC sheet (in the sheet they have showed that when you move arm no.# this will sound on the screen with say X or Y rotation and so on) the only thing that not as per the sheet is the landing gear button, it was inverted (when I press it down should reflect on screen Button 1 but it showed 2) and vs. versa The problem is that, 1- My landing gear button working very strange : to down the gear, I’m pulling it down, to up the gear I HAVE to pull it up and then down!!! 2- The separate reverse arm couldn’t be assigned by FSX itself, this option is not there, so I have to assign it through FSIUPC. When I tried to calibrate it on the programme, it showed zero for in and out, so its not seen by the prog. I guess. 3- Finally my spoiler arm in the aircraft is either going ups and down in crazy way, or doesn’t’ respond to the arm movement in the console This is what I'm in 4 days a go!!! Thanks in advance Pete Regards, mavi LATER: I will do a trail again when be back home @ 1630z and will see what happened with the new version 4.714 and I will copy the INI file and will send it to your kind self if there any problems Regards mavi

Thanks Pete for reply Ok, first I will get that 4.70 now. my PFC device is: Throttle Quadrant Console Part #: DTQC ( https://flypfc.com/?...drant-console1/) it's a USB device, but what is that PFCFHID.INI??? or where to locate it?? I'm assigning some arms in the FSIUPC (such like the separate reverse arm, the crazy spoiler arm, and the landing gear) , actually, I have been asked by PFC to assign arms through FSIUPC Prog. The documentation i have mentioned above is the user guide and advanced user guide and some others came to me through PFC Tech support regarding the console. Thanks in advance Pete Regards, mavi LATER: I have got the 4.70, will update to 4.714 very soon

Good Day All I have just got a PFC Throttle Quadrant Console to work with my FSX. actually, I have tried to assign axis but it's still in gray, couldn't find any axis to be assigned. yesterday at once, I have found 2 axis named N, and T and numbered 17 and 18 but they are sounds to nothing!!!!! the values IN and OUT were changing with the moused movement not with any lever movements. Furthermore, my separate reverse axis is not sound in the calibration inside the program while its showing full values in windows calibration!!!! another thing also is that the spoiler arm is continuously moving (in the FSX's aircraft) ups and down and not following the arm movement in the console. I don't know what shall I do really, I have all the documentation needed to start everything.......feeling frustrated :S attached is my .INI file for your reference.......any help Guys??? Regards, maviFSUIPC4.txt

Good Day Pete, I have got that PFC Throttle Console few days ago, it looks great and axis could be assigned directly from FSX. problem is that I wanna do 3 things: 1- to assign the reverse arm to work for all Engs. 2- to avoid the spoiler from waggling ups and down when I use the spoiler arm, and 3- to assign the landing gear axis to work properly as it works only in one way: if I press it to down ...Ok gear gos down...but to get the gear up I have to press up and down to get it up :S The big problem is that the axis assigning butt. is not working (or remaines gray) in my regstered FSUIPC.....nothing appear there, and if some axis appears they are always No. 17, and 18 with the symbole N and T. I'm going frustreated now coz I couldn't find any solution regarding this issue even in the FSUIPC user's Guide. I know that I will get a lot from your valiable time, but please help me Appreciated in advance Pete Regards, mavi