MichaelMoe

Problem solved :-) I missed the registrer button and instead just clicked "next" sorry Michael Moe

Hi again, Tried to un-install all and install again in the default folder (documents/p3dv4 addons) but now also P3Dv4 is unregistrered ?? Its like its not accepting my licens when i enter it ? its reading the wrong sim running it seems Michael Moe FSUIPC6.log

Sorry, What i meen is its only registrered in P3Dv4, P3Dv5 says its unregistrered and i cant get it to work. Also the register buttons on the right is greyed out and i need to reinstall it says but it doesnt work. Installed as individuals Michael Moe FSUIPC6.log FSUIPC6.log

Hi, i ran the installer twice as of v4 and v5 and something whent wrong . I dont have licence in v5 for sure What am i missing in v5 ? Thanks Michael Moe

For years i havent being abled to find the correct function to the spoiler arm with speedbrake. The first part on my lever is a switch and just after a normal axis. Axis spoiler setup is straight forward but how do i arm and disarm the speedbrake? Its only one switch Example PMDG 7XX Thanks Michael Moe

Hi Pete You are brilliant - indeed it was one of your suggestions regarding the weather files. Now back to normal . Thanks alot Michael Moe

Hi Pete Thanks for your quick response, No will do the other way around as well - Chaseplane also mentioned a corrupt installation some where I will look into the wx file but also want you to know that i can reproduce the CTD everytime i activate FSUIPC Event-viewer did not give a "red alert" crashreport but i will report back what i find Thanks alot Michael Moe

Hi Pete, After an update to some cameras from Chaseplane i think i have a conflict with both FSUIPC and Chaseplane for P3Dv4.2. By trial and error i have reinstalled P3Dv4.2 Client ,Chaseplane and lastly i disabled FSUIPC (5.124) which solved the CTD and Chaseplane interface was back working. I dont know how and why this happened so i tried out rolling back to 5.122 deleting everything in the module folder but with same result (CTD in the NGX counting down from the normal 20 seconds when it init the plane with 17 seconds to go. I have provided the ini and log file here . Any suggestions is very welcome :-) Thanks Michael Moe FSUIPC5.ini FSUIPC5.log

Hi, (Pete) Anyone know if its possible to use the CDUII from VRInsight with P3Dv4 and FSUIPC5 ? Drivers/software not updated since July 2016 , I am not that much into the tech between VRInsight products and FSUIPC5, not to mention P3Dv4 being 64 bit Thanks Michael Moe

Thanks alot Pete :-) Michael Moe

Hi Pete I am using MT6 and the "Traffic Toggle density" is not behaving (not working) like in V3 Can you look at it ? Miss it as a shortcut on my yoke on Approach or if i just needed that extra 2fps :-) Thanks Michael Moe

Thanks , I noticed that VPilot has model matching for SODE and other AI . I tried disable those so only Mytraffic is used Yeah i am staying with 3.4.9.18400 because of VAS/SLI driver issues with later versions Thanks Michael Moe

Thanks and sorry , yes the CTD was out of the blue 2 times yesterday . Leaving Vpilot out of the equation helped . Second CTD and nothing in the eventviewer other than SODE (1.4.2 (allthough dll says 1.4.3) crashed but at FL350 it might be because the sim crashed to desktop i dont know. Thanks apreciated Michael Moe

Hi Pete I started my PMDG 747v3 experience this weekend and updated to the latest FSUIPC. I have the MT6 and P3D3. 4.9.18400 and traffic slider at only 5%. I got some strange errors loading up Vpilot saying something about my AI had change a lot and it made a rerun. After that i see alot to this P3D loading Traffic screen and especially if i am using the sim speedup feature inside the 747. I did not have any issues with 4961 and i do think its related to vpilot but again i did not have any issues before updating FSUIPC. Any ideer why this happens? Thanks Michael Moe

Hi Pete, I have Throttle 1 and 2 assigned in FSUIPC (using the NGX today but not specific calibration for aircrafttype) For some reason it seems that the spoiler assigning might have been corrupted so i removed it and everything is fine right now. Thanks for explaining things Michael Moe

Hi Pete hmm did not know that - Never thought about those values. Just calibrated them But actually Yes the hole range goes from -16384 to + 16380 . Same goes for my Saitek Yoke btw. (ailerons and elevator) and my rudder pedals What i meant about the axis is that i only have them assigned in the FSUIPC menu. Not in P3D´s own controller menu. Does it meen anything ? Normally having reverse zone disabled work but i will try some more without shutting down the PC Thank Michael Moe

Hi Pete Sorry , The version is FSUIPC 4.957 (not b) :-) , Yeah the values seems very smooth in the calibration menu and no other axis assigned in P3D, I do have a feeling that switching off my PC and accesories on the main power plug (for economy reasons) resets the calibration for some reason in W10,64Bit. Will need to test further I am not a tech guy so dont know exactly what the -ve meens in practice. Will report back Thanks Michael Moe

Hi. I am using latest version of P3D3. 4 and FSUIPC and have my throttletek 737 calibrated via FSUIPC. Seems fine but when i push forward from 40% after hitting TOGA sometimes engine 2 goes in reverse. I have the no reverse zone selected. Havent seen this problem in years. Any ideers? PS. I also had this issue during taxi with no A/T engaged Thanks Michael Moe

Hi. I started to have problem finding the CDUII via the Vrinsight software on Windows 10. i dont know What have happened as it used to work. reinstallling the NGX and software did not work. latest FSUIPC installed. Thanks Michael Moe

Thanks Pete. I tried deleting any wx file without luck on saturday but i have not tried the.bin file.will try that.Thanks it really can be a needle in a haystack. Michael

hmm long shot but it seems that if i change every "weather" thing to 0 in the FSUIPC configuration(latest build 4.939"e") i am good for now at least. Also with ASN , Just tried to switch plane and location that would normally CTD in a few seconds and we are now over 2 minutes. 1, First default plane , ESSA , then EKCH, 2. Selecting PMDG NGX736, 3. changing location to EGLL no issues so far Michael Moe

Also Latest P3D build 12.944 and the newest version of FSUIPC Every time i change a location AND with FSUIPC active i get this 5-10 seconds after loading the flight I have no issues when disabling FSUIPC via dll.xml Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: Prepar3D.exe P2: 2.5.12944.0 P3: 54ee1a39 P4: weather.dll P5: 2.5.12944.0 P6: 54ee1968 P7: c0000005 P8: 0003175e P9: P10: Attached files: C:\Users\Michael\AppData\Roaming\Lockheed Martin\Prepar3D v2\Prepar3D.cfg.txt C:\Users\Michael\AppData\Roaming\Lockheed Martin\Prepar3D v2\dxdiag.txt C:\Users\Michael\AppData\Roaming\Lockheed Martin\Prepar3D v2\fdr.dat C:\Users\Michael\AppData\Roaming\Lockheed Martin\Prepar3D v2\dll.xml C:\Users\Michael\AppData\Local\Temp\WERDAD5.tmp.WERInternalMetadata.xml These files may be available here: C:\Users\Michael\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Prepar3D.exe_d0fa2afde4342cabcfcb9aa15a9ec613199764_139b0fda Analysis symbol: Rechecking for solution: 0 Report Id: 5e815d60-c4b6-11e4-ab22-6c71d99491df Report Status: 1 Faulting application name: Prepar3D.exe, version: 2.5.12944.0, time stamp: 0x54ee1a39 Faulting module name: weather.dll, version: 2.5.12944.0, time stamp: 0x54ee1968 Exception code: 0xc0000005 Fault offset: 0x0003175e Faulting process id: 0xe04 Faulting application start time: 0x01d058c2b1447cff Faulting application path: P:\P3DV2\Prepar3D.exe Faulting module path: P:\P3DV2\weather.dll Report Id: 5e815d60-c4b6-11e4-ab22-6c71d99491df FSUIPC LOG ********* FSUIPC4, Version 4.939 by Pete Dowson ********* Reading options from "P:\P3DV2\Modules\FSUIPC4.ini" Running inside Prepar3D v2 on Windows 7 Module base=55BA0000 User Name="Michael Petersen" User Addr="michaelmoe@email.dk" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 390 System time = 07/03/2015 11:37:28 390 FLT path = "C:\Users\Michael\Documents\Prepar3D v2 Files\" 390 Trying P:\P3DV2\Modules\SimConnectP3D2.dll 390 Found it: trying to connect 390 FS path = "P:\P3DV2\" 546 LogOptions=00000000 00000001 546 SIM1 Frictions access gained 546 Wind smoothing fix is fully installed 546 SimConnect_Open succeeded: waiting to check version okay 546 Trying to use SimConnect Prepar3D 6583 Running in "Lockheed Martin® Prepar3D® v2", Version: 2.5.12944.0 (SimConnect: 2.5.0.0) 6583 Initialising SimConnect data requests now 6583 FSUIPC Menu entry added 6599 C:\Users\Michael\AppData\Local\Lockheed Martin\Prepar3D v2\Prepar3D_Default.fxml 6599 P:\P3DV2\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air 61963 System time = 07/03/2015 11:38:30, Simulator time = 15:56:45 (14:56Z) 61963 Aircraft="F-22 Raptor - 525th Fighter Squadron" 63835 Starting everything now ... 64147 ASN active function link set 64147 Ready for ASN WX radar 69218 Advanced Weather Interface Enabled 144426 Sim stopped: average frame rate for last 79 secs = 19.0 fps Thanks Michael Moe

Hi Pete I was suspection ASN but Kosta from ASN has nailed it down to your module The eventviewer log is Faulting application name: Prepar3D.exe, version: 2.5.12942.0, time stamp: 0x54d283cc Faulting module name: weather.dll, version: 2.5.12942.0, time stamp: 0x54d28391 Exception code: 0xc0000005 Fault offset: 0x00031770 Faulting process id: 0x16a8 Faulting application start time: 0x01d057953ea9c2f2 Faulting application path: P:\P3DV2\Prepar3D.exe Faulting module path: P:\P3DV2\weather.dll Report Id: 9f67703c-c388-11e4-b11c-74d02b9d57d5 and the FSUIPC log is ********* FSUIPC4, Version 4.939e by Pete Dowson ********* Reading options from "P:\P3DV2\Modules\FSUIPC4.ini" Running inside Prepar3D v2 on Windows 7 Module base=56F40000 User Name="Michael Petersen" User Addr="michaelmoe@email.dk" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 422 System time = 05/03/2015 23:39:36 422 FLT path = "C:\Users\Michael\Documents\Prepar3D v2 Files\" 422 Trying P:\P3DV2\Modules\SimConnectP3D2.dll 422 Found it: trying to connect 422 FS path = "P:\P3DV2\" 546 LogOptions=00000000 00000001 546 --- CONTROLS timer memory location obtained ok 546 --- SIM1 Frictions access gained 546 --- FS Controls Table located ok 546 --- Installed Mouse Macro hooks ok. 546 --- Wind smoothing fix is fully installed 546 SimConnect_Open succeeded: waiting to check version okay 546 Trying to use SimConnect Prepar3D 4790 Running in "Lockheed Martin® Prepar3D® v2", Version: 2.5.12942.0 (SimConnect: 2.5.0.0) 4790 Initialising SimConnect data requests now 4790 FSUIPC Menu entry added 4805 C:\Users\Michael\AppData\Local\Lockheed Martin\Prepar3D v2\Prepar3D_Default.fxml 4805 P:\P3DV2\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air 38954 System time = 05/03/2015 23:40:15, Simulator time = 23:39:40 (22:39Z) 38954 Aircraft="F-22 Raptor - 525th Fighter Squadron" 46957 Starting everything now ... The system crash just after loading a flight but only with FSUIPC enabled in dll.exe Any ideer ? all controls is also disabled Thanks Michael Moe