johnk51

I have the MJC Dash 8 Q400 pro. Landing lights nor taxi lights come on when I push the buttons. I only use VC and the switches don't move and in spot view, no lights come either. I'm running FSX-SE on windows 10 64-bit with 16gig ram.

I'm trying to setup my Saitek X52 to toggle the taxi lights on/off and the landing lights.​ I'm using fsuipc4 to do this. I set button 12 to toggle taxi lights and button 13 for landing lights. However, they don't work. My other buttons work, elevator trim, landing gear, flaps, condition levers... I don't know why I can't get these to work. My pmdg 737, 777 work, as well as my small planes. I've even tried offsets for them in fsuipc. And I do have the register version of fsuipc. I would appreciate any help. I can still just click with the mouse.

After down loading the zip file, I try to extract it and I get an error message. Extracting to "C:\Users\Dad\AppData\Local\Temp\wzeebf\" Use Path: yes Overlay Files: yes Warning: skipping "Schedule Creator TRACON 11 RFN.exe". The 32-bit CRC stored in the local header for this file is not the same as the 32-bit CRC stored in the central header And it won't extract. The new one for tower 2011 opened just fine.

I can't unzip schedule creator 15 v3 rfn.exe. When I try I get an error message: warning: skipping "schedule creator 15 v3 rfn.exe". the 32-bit crc stored in the local header for the file is not the same the 32-bit crc stored in the central header. The when I say yes and look at the details I get: extracting to (then a temp location) then user path: yes overlay files: yes. Then I get the warning message I gave at the beginning. Any Ideas what's wrong? I've downloaded several times, but the same problem. I've downloaded and unzipped other zip files with no problems. I'm running win 7 pro 64-bit. I really like the idea of making cargo schedules.

I found the problem & that's fixed. I have disabled the controllers in fsx and using FSUIP. I also had a problem with the hat-switch and found a topic where you had told some one to assign it to the axis pan_view. I did that and it works great. The programing each button made it jerky. So for now all my planes are working great. Thanks for the help.

I've started using my feelthere 737 again and got everything programed to my Saitek x52 stick and peddles. I have the landing gear assigned to button 4. It works fine. Since not everything in the VC works on the 737 I assigned buttons 8, 9 and 10, 11 to 8 mixture 1 rich, 9 mixture 1 lean, 10 & 11 the same for mixture 2. When I tested out on a flight all was good. However, after parking and pressed button 9 to shut down engine 1, it also toggled the landing gear. When I pressed again the gear lever went back down. I've looked at everything I could look at and can't see why mixture 1 lean causes the landing gear to toggle. The landing gear is assigned to G on button 4. button 9 is P0, c65987,0, which is mixture 1 lean. And that's the only one that does it. I attached the log file. fsuipc log.zip

I'm having trouble with fsuipc 4. I have shortaircraftnameok=yes and profiles=yes. However, when I change planes I.E. iFly or PMDG 77, I have to open up fsuipc and do like my buttons and switches and click on profiles. It will either select the plane or I have to pick it from the list. Shouldn't it be automatic that it picks the correct plane?

That's probably it. I went to buttons and switches and pushed create mouse macro. In fs9 after I did that I went and selected the keys I needed to and then I had it. I attached the macro so you can see what happened. This is my fs9 one.iFly737.zip

I fly fs9 in window mode. So when I made the macro I pressed the iFly on the menu bar, then ground services. That was it, the power and air menu popped up and all I had to do was select power and air. But I can't get the macro button to show up in fsx so I can end the macro. Maybe it has to do with iFly 737s. I could try the default 172 to see if it works with that.

About the only thing I was going to use it for was having a macro that when I pushed a button on the flight stick, it would open the ground services in the ifly menu. I did it in fs9, but in fsx the ifly menu is under add-on menu's. So I couldn't use the one for fs9. It's not that big of a deal. I just have to open it with the mouse.

I got fsx a couple of weeks ago and purchased fsuipc4 (I have fsuipc3 for fs9). I went to create a mouse macro but the box that should be showing while I did the mouse clicks wasn't there. I thought I saw it flash on the screen for a second then went away. I've done them in fs9. I was making one for my iFly 737 plane and was in the 2d panel. I'm running win7 pro 64 and 8gigs ram. Any ideas.

Does this also work in fs9?

I know, my feelthere 737s you click just above of the ground power switch the part that lights up when ready, then after a minute or so it comes on and then flip the switch. Or level-D you have the contact ground and request power and air. But, at least this does save time. Better than nothing.

I've got the macro to open to the ground window, then all I have to do is click on the ground power and air. Save time using the alt and getting to that screen.

I have ifly 737 and to turn on ground power you have to go to the menu and pick ifly then the ifly 737 then ground commands then click on ground power and ground air to make it available. I think I have the first part done. I can have it open up to the part that shows the ground stuff. But how can I have it click on the ground power available and ground air available. Those are just click spots. Any ideas?