Jump to content


Photo

I HAVE UPDATED MY FSUIPC TO VERSION 4.91 AND MY SAITEK HARDWARE IS NOT WORKING


  • Please log in to reply
53 replies to this topic

#1 franygal

franygal

    Member

  • Members
  • PipPip
  • 24 posts
  • LocationESPAÑA

Posted 26 August 2013 - 05:51 PM

Hi everyone!

 

I'm really worried! On 02/27/2012 I purchased Fsuipc version 4.80. Everything was working fine with my Saitek pro flight yoke and Tpm. A few months later, I updated it to a 4.90 version as Pete Dawson told us in the forum. Everything  was ok with this version too but when I installed my saitek pro flight switch panel drivers, my panel didn't work properly. I thought I should update my fsuipc to the latest version (4.91) so I checked existing registration user. When I restarted Fsx, my yoke and Tpm didn't work. I can't calibrate my yoke and tpm. I uninstalled everything (fsuipc.ini, dll, key, etc) and I returned to install my old Fsuipc version 4.80. Again everything worked fine! Today I have purchased the new version 4.91 thinking everything would work fine and Fsuipc don't recognize my Saitek pro flight yoke and Tpm systems. what should I do? Could I post my log file here? Please, I need your help.

 

Thank you very much


  • 0

#2 Pete Dowson

Pete Dowson

    Advanced Member

  • Moderators
  • 27,294 posts
  • LocationNear Stoke-on-Trent, UK

Posted 26 August 2013 - 06:24 PM

I'm really worried! On 02/27/2012 I purchased Fsuipc version 4.80. Everything was working fine with my Saitek pro flight yoke and Tpm. A few months later, I updated it to a 4.90 version as Pete Dawson told us in the forum. Everything  was ok with this version too but when I installed my saitek pro flight switch panel drivers, my panel didn't work properly. I thought I should update my fsuipc to the latest version (4.91) so I checked existing registration user. When I restarted Fsx, my yoke and Tpm didn't work. I can't calibrate my yoke and tpm. I uninstalled everything (fsuipc.ini, dll, key, etc) and I returned to install my old Fsuipc version 4.80. Again everything worked fine! Today I have purchased the new version 4.91 thinking everything would work fine and Fsuipc don't recognize my Saitek pro flight yoke and Tpm systems. what should I do? Could I post my log file here? Please, I need your help.

 

I moved your post from the "FAQ" subforum, where it is lucky I noticed it, to the Support Forum which is where you need to be to ask for support.

 

You NEVER need to re-purchase FSUIPC4. You are entitled to all updates, forever.

 

There is no difference whatsoever in the way FSUIPC 4.9 reads joysticks to that used in FSUIPC 4.8.  All versions of FSUIPC4 use standard DirectInput facilities in the same way as FSX itself.

 

Please, yes, post the log file from 4.91, and, more importantly, the INI file showing your settings. Just paste them into a message.

 

Pete


  • 0

#3 franygal

franygal

    Member

  • Members
  • PipPip
  • 24 posts
  • LocationESPAÑA

Posted 26 August 2013 - 06:49 PM

Thank you very much Pete, but It's too late for me now! I purchased it twice...  :???:  Here you can find my logs and ini file. I hope you can help me. It's very important for me.

 

Kind regards,

 

Fran

 

 

Installer for FSUIPC4.DLL version 4.91

Looking in registry for FSX install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
     Parameter"SetupPath"
... >>>  OK! FOUND FSX!  <<< ...
Looking in registry for ESP install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft ESP\1.0
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\ESP
     Parameter"AppPath"
... NOT found! ...
Looking in registry for Prepar3D install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\Prepar3D
     Parameter"AppPath"
... NOT found! ...
===========================================================

INSTALLATION FOR FSX:
SetupPath="E:\Microsoft Flight Simulator X\"
Checking version of FSX.EXE:
... Version 10.0.61637.0  (Need at least 10.0.60905.0)
Checking compatibility with installed SimConnect:
    Found SimConnect build 60905 (Original)
    Found SimConnect build 61242 (SP1 May07)
    Found SimConnect build 61259 (Acc/SP2 Oct07)
Checking if there's already a version of FSUIPC4 installed in:
       E:\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL
... No previous valid version found.
FSX Modules folder already exists.
Okay -- installed FSUIPC4 into "E:\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path:
... found as "C:\Users\Usuario\AppData\Roaming"
Now finding \Microsoft\FSX\FSX.CFG for all users, including this one
Looking in "C:\Users\All Users\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Default\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Default User\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Public\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\UpdatusUser\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Usuario\AppData\Roaming"
Found FSX.CFG in "C:\Users\Usuario\AppData\Roaming\Microsoft\FSX\FSX.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
     (for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... There is a SimConnect.XML, checking for "local" section.
... "local" section already exists, file not modified.
"Modules\FSUIPC Documents" folder created okay!
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC4 User Guide.pdf" okay
   Installed "FSUIPC4 for Advanced Users.pdf" okay
   Installed "FSUIPC4 History.pdf" okay
   Installed "List of FSX controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
===========================================================

All installer tasks completed.
Registration for FSUIPC4 was successful! (result code 00)

*************** End of Install Log ***************

 

 

 

 

[General]
UpdatedByVersion=4910
History=WLTI4CY7760P33ZPYE7SJ
InitDelayDevicesToo=No
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
DeleteVehiclesForAES=Yes
AutoScanDevices=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=Yes
OOMcheck=Yes
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
LuaRerunDelay=66
Console=No
FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0
SimConnectUsed=10.0.61259.0
[JoyNames]
AutoAssignLetters=No
0=Saitek Pro Flight Yoke
0.GUID={F1D9F040-9BC5-11E1-8001-444553540000}
1=Saitek Pro Flight TPM System
1.GUID={2B7E34A0-C3E3-11E2-8001-444553540000}
[Buttons]
ButtonRepeat=20,10
[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No
[GPSout]
GPSoutEnabled=No
[GPSout2]
GPSoutEnabled=No
[WideServer]
WideFSenabled=Yes
[Sounds]
Path=E:\Microsoft Flight Simulator X\Sound\
Device1=Controlador primario de sonido
Device2=Altavoces (3- HP Premium Digital Headset)
Device3=Realtek Digital Output (Realtek High Definition Audio)
Device4=Realtek Digital Output(Optical) (Realtek High Definition Audio)

 

 

 

 

********* FSUIPC4, Version 4.91 by Pete Dowson *********
Running inside FSX
Module base=61440000
User Name="FRANCISCO JAVIER GALÁN DÍAZ"
User Addr="fran_galan@yahoo.es"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
      686 System time = 26/08/2013 18:56:42
      686 FLT path = "C:\Users\Usuario\Documents\Archivos de Flight Simulator X\"
      717 Trying to connect to SimConnect Acc/SP2 Oct07 ...
      717 FS path = "E:\Microsoft Flight Simulator X\"
     1060 LogOptions=00000000 00000001
     1060 SIM1 Frictions access gained
     1076 Wind smoothing fix is fully installed
     1076 G3D.DLL fix attempt installed ok
     1076 SimConnect_Open succeeded: waiting to check version okay
     1076 Trying to use SimConnect Acc/SP2 Oct07
     3432 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)
     3432 Initialising SimConnect data requests now
     3432 FSUIPC Menu entry added
     3463 E:\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT
     3463 E:\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR
     9188 E:\Microsoft Flight Simulator X\SimObjects\Airplanes\Carenado Cessna 182Q\Carcessna182Q.AIR
   103959 System time = 26/08/2013 18:58:26, Simulator time = 14:24:32 (12:24Z)
   103959 Aircraft="Carenado CESSNA Skylane 182Q AirHispania"
   104957 Starting everything now ...
   108467 Advanced Weather Interface Enabled
   163785 System time = 26/08/2013 18:59:26, Simulator time = 14:24:44 (12:24Z)
   163785 *** FSUIPC log file being closed
Average frame rate for running time of 12 secs = 42.8 fps
G3D fix: Passes 6745, Null pointers 0, Bad pointers 0, Separate instances 0
Memory managed: 6 Allocs, 6 Freed
********* FSUIPC Log file closed ***********


  • 0

#4 Pete Dowson

Pete Dowson

    Advanced Member

  • Moderators
  • 27,294 posts
  • LocationNear Stoke-on-Trent, UK

Posted 26 August 2013 - 06:56 PM

[JoyNames]

AutoAssignLetters=No
0=Saitek Pro Flight Yoke
0.GUID={F1D9F040-9BC5-11E1-8001-444553540000}
1=Saitek Pro Flight TPM System
1.GUID={2B7E34A0-C3E3-11E2-8001-444553540000}

 

 

Well, if that's a newly generated INI file with 4.91, it is seeing the Saitek devices okay, as you can see. So there's no reason why you shouldn't be able to assign. What have you actually tried to do? Are you assigning buttons and axes in FSUIPC, or are you assigning in FSX and only claibrating in FSUIPC. I can't tell from the settings because there are no buton assignments, no axis assignments, and no calibrations.

 

Regards

Pete


  • 0

#5 franygal

franygal

    Member

  • Members
  • PipPip
  • 24 posts
  • LocationESPAÑA

Posted 26 August 2013 - 07:08 PM

I'm trying to assign axes and buttons in FSUIPC only. I have disabled controls in FSX. If I install FSUIPC version 4.80 everything work fine for me. In Axes and buttons window, when I move my yoke and Tpm, Fsuipc 4.91 don't recognize it.

 

Fran


  • 0

#6 Pete Dowson

Pete Dowson

    Advanced Member

  • Moderators
  • 27,294 posts
  • LocationNear Stoke-on-Trent, UK

Posted 26 August 2013 - 07:53 PM

I'm trying to assign axes and buttons in FSUIPC only. I have disabled controls in FSX. If I install FSUIPC version 4.80 everything work fine for me. In Axes and buttons window, when I move my yoke and Tpm, Fsuipc 4.91 don't recognize it.

 

Hmm. Very strange.

 

I've added some extra logging. Please download FSUIPC4913a and copy the DLL into your Modules folder. Edit the INI file, adding these lines to the [General] section:

 

Debug=Please
LogButtonsKeys=Yes
LogAxes=Yes
LogExtras=xA00008
 

This will (or should!) cause a lot of logging, so it's only temporary. It should log every single read of every joystick which is (a ) successful, and (b ) different from before. Go into FSUIPC's options, try to assign some buttons, then axes. Show me the log and tell me exactly what happened on screen.

 

Currently I don't understand it, because there's no difference at all in this part of FSUIPC since 4.80 (or even since 4.0). And it is perfectly fine here with Saitek axes and buttons.

 

Pete


  • 0

#7 franygal

franygal

    Member

  • Members
  • PipPip
  • 24 posts
  • LocationESPAÑA

Posted 26 August 2013 - 08:11 PM

Thank you again for your faster replies Pete. I'm going to try it, but while I would like to post here my old FSUIPC.INI (4.80 version). I think it could be useful for you too. Also I have tried to copy [Joynames]  [Axes] and [Buttons] sections from my old version (4.80) to new (4.91) but it doesn't recognize my Saitek hardware. I will inform you when I test your temporary logging.

 

 

[General]
UpdatedByVersion=4800
History=ZZAJ8LXG75G2884U3JCXP
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
DeleteVehiclesForAES=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=No
UseProfiles=Yes
EnableMouseLook=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=Yes
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
LuaRerunDelay=66
Console=No
FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0
SimConnectUsed=10.0.61259.0

[JoyNames]
AutoAssignLetters=No
0=Saitek Pro Flight Yoke
0.GUID={F1D9F040-9BC5-11E1-8001-444553540000}
1=Saitek Pro Flight TPM System
1.GUID={2B7E34A0-C3E3-11E2-8001-444553540000}

[Buttons]
ButtonRepeat=20,10
1=R0,0,K190,8
2=P0,5,K119,8
3=P0,4,K117,8
4=R0,3,K49,8
5=U0,3,K49,8
6=R0,2,K56,8
7=U0,2,K56,8
8=R0,7,K74,11
9=U0,7,K74,11
10=R0,6,K72,11
11=U0,6,K72,11

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No

[GPSout2]
GPSoutEnabled=No

[WideServer]
WideFSenabled=Yes

[Sounds]
Path=E:\Microsoft Flight Simulator X\Sound\
Device1=Controlador primario de sonido
Device2=Altavoces (3- HP Premium Digital Headset)
Device3=Realtek Digital Output (Realtek High Definition Audio)
Device4=Realtek Digital Output(Optical) (Realtek High Definition Audio)

[Axes]
0=0X,256,D,1,0,0,0
1=0Y,256,D,0,2,0,0
2=1X,256,D,4,0,0,0
3=1Y,256,D,0,5,0,0
4=1R,256,D,0,0,6,0

[Programs]
Run1=HIDE,”E:\Microsoft Flight Simulator X\fsx.bat”
Run2=HIDE,"C:\Program Files (x86)\FSPS\Sim Physics X\Sim Physics X.exe"
Run3=HIDE,"C:\Program Files (x86)\NaturalPoint\TrackIR5\TrackIR5.exe"
RunIf1=READY,CLOSE,KILL,E:\AirHispania\AhsBb\AHS_BOX.exe

[LuaFiles]
1=FSPS


  • 0

#8 Pete Dowson

Pete Dowson

    Advanced Member

  • Moderators
  • 27,294 posts
  • LocationNear Stoke-on-Trent, UK

Posted 26 August 2013 - 08:51 PM

Thank you again for your faster replies Pete. I'm going to try it, but while I would like to post here my old FSUIPC.INI (4.80 version). I think it could be useful for you too. Also I have tried to copy [Joynames]  [Axes] and [Buttons] sections from my old version (4.80) to new (4.91) but it doesn't recognize my Saitek hardware. I will inform you when I test your temporary logging.

 

Hmm. See nothing there which is going to be different. And the Joystick names etc are identical to those detected by 4.91. It DOES recognse them because it adds them to the INI.

 

Pete


  • 0

#9 franygal

franygal

    Member

  • Members
  • PipPip
  • 24 posts
  • LocationESPAÑA

Posted 26 August 2013 - 09:19 PM

Hi again Pete,

 

I have tried your temporary solution, I have done everything step by step but it didn't work for me. I have tried to calibrate the yoke and assign some keys. You can see it in the log file attached, but my controls doesn't move in FSUIPC. It's very strange. If I could create a new profile and see the assigned buttons, why can't I move my Saitek yoke and Tpm?

 

Fran

 

 

[General]
Debug=Please
UpdatedByVersion=4913a
History=A6ASLXJOHRABIIE4DTM7O
InitDelayDevicesToo=No
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
DeleteVehiclesForAES=Yes
AutoScanDevices=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=3
MinIce=-1
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=Yes
OOMcheck=Yes
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
LuaRerunDelay=66
Console=No
FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0
SimConnectUsed=10.0.61259.0

[JoyNames]
AutoAssignLetters=No
0=Saitek Pro Flight Yoke
0.GUID={F1D9F040-9BC5-11E1-8001-444553540000}
1=Saitek Pro Flight TPM System
1.GUID={2B7E34A0-C3E3-11E2-8001-444553540000}

[Buttons]
ButtonRepeat=20,10

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No

[GPSout2]
GPSoutEnabled=No

[WideServer]
WideFSenabled=Yes

[Sounds]
Path=E:\Microsoft Flight Simulator X\Sound\
Device1=Controlador primario de sonido
Device2=Altavoces (3- HP Premium Digital Headset)
Device3=Realtek Digital Output (Realtek High Definition Audio)
Device4=Realtek Digital Output(Optical) (Realtek High Definition Audio)
[LuaFiles]
1=FSPS
[Profile.sgfs]
1=Carenado CESSNA Skylane 182Q AirHispania
[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16380,-512,512,16380
 


  • 0

#10 Pete Dowson

Pete Dowson

    Advanced Member

  • Moderators
  • 27,294 posts
  • LocationNear Stoke-on-Trent, UK

Posted 26 August 2013 - 10:56 PM

I have tried your temporary solution, I have done everything step by step but it didn't work for me

 

What "temporary solution"? I've not come up with any solution yet because I don't understand the problem. I told you that! I added more logging in the interim release, version 4.913a, in order to try to find more information to tell me what is going on! Please read what I write a little more carefully or we'll get no where at all!

 

I have tried to calibrate the yoke and assign some keys.

 

Er, hold on. "Calibrate the yoke"? You cannot calibrate the yoke unless you've assigned the axes on it to something to calibrate!!!! I assumed you were talking about ASSIGNMENTS not CALIBRATION.

 

You can see it in the log file attached

 

I can't see anything at all in the log because you haven't supplied one. You just posted your INI file again! AND I can see that you haven't even bothered to add the lines I asked you to add! Those lines were to give me more information to help you out!!

 

If I could create a new profile and see the assigned buttons

 

So are you now saying you can see and assign buttons!!?? Earlier you were saying that FSUIPC didn't see your devices at all!

 

I'm sorry, but I have to finiish with this for now. I'm going to be out for the next few days. I respectfully suggest you read back over this thread, because there appears some misunderstandings going on. You don't add the lines to the INI as I asked, you don't supply the log, you talk abouty calibrations and not assignments,. All this suggests that you are perhaps not reading my messages and not understanding that you need to assign axes before you can calibrate.

 

I might be able to check back tomorrow night, or maybe Wednesday, but if not it could be a week from now as i'm away. If there is a genuine problem here I need information before I can provide any solutions, let alone "temporary" ones. That's what logging is all about. It tells me what is going on.

 

:sad:

 

Regards

Pete


  • 0

#11 franygal

franygal

    Member

  • Members
  • PipPip
  • 24 posts
  • LocationESPAÑA

Posted 27 August 2013 - 07:32 AM

Sorry Pete! I think there is a lot of misunderstandings here! For me it's very difficult trying to understand and write technical English. When I told you "temporary solution" I was referring to your comment " I've added some extra logging. This will (or should!) cause a lot of logging, so it's only temporary "...

 

1. I downloaded FSUIPC4913aI

2. I copied the DLL file into my Modules folder as you told me...

3. I Edited my INI file, adding these lines to the [General] section as you told me...

 

Debug=Please
LogButtonsKeys=Yes
LogAxes=Yes
LogExtras=xA00008

 

4. The following step was loading my FSX, I opened FSUIPC and tried to assign some buttons and axes but my Saitek Yoke and TPM didn't move! I created a new profile, I pressed some keys, I tried to calibrate, but the problem was exactly the same. FSUIPC didn't recognize my Saitek Hardware one more time.

 

5. I posted here my INI file when I closed FSX as you told me (you can see the following lines in it)

 

[General]
Debug=Please
UpdatedByVersion=4913a

 

But doesn't appear these lines (I don't know why)...

 

(LogButtonsKeys=Yes
LogAxes=Yes
LogExtras=xA00008

 

After to do this, I deleted all FSUIPC files from my Modules folder and all FSUIPC lines from my FSX.CFG, Again, I installed my older FSUIPC version 4.80, I loaded FSX, I opened FSUIPC and when I moved my Saitek controls, Everything worked fine!

 

I don't know what is happening in my computer! I'm not a personal programmer, I'm only a flight simmer and a customer who paid FSUPC twice!

 

Today I will try to read this post again and do everything you told me. If it doesn't work, I will revert to my old FSUIPC version 4.80.

 

I do apologise for all the inconvenience.

 

Kind regards,

 

Fran


  • 0

#12 Pete Dowson

Pete Dowson

    Advanced Member

  • Moderators
  • 27,294 posts
  • LocationNear Stoke-on-Trent, UK

Posted 27 August 2013 - 07:54 AM

I didn't sleep well, so got up rather earlier than usual, so I managed to see your new reply:

 

Sorry Pete! I think there is a lot of misunderstandings here! For me it's very difficult trying to understand and write technical English. When I told you "temporary solution" I was referring to your comment " I've added some extra logging. This will (or should!) cause a lot of logging, so it's only temporary "...

 

Yes, a temporary change in order to get more information of the problem, NOT any sort of "solution". I wouldn't have expected ANY changes in behaviour at all, just a much bigger log file!

 

1. I downloaded FSUIPC4913aI

2. I copied the DLL file into my Modules folder as you told me...

3. I Edited my INI file, adding these lines to the [General] section as you told me...

 

Debug=Please
LogButtonsKeys=Yes
LogAxes=Yes
LogExtras=xA00008

 

 

But only the first line is in the INI you showed me. If you really did add the lines properly, then this can only mean you tried adding the lines whilst FS was running, instead of before! That would remove those lines, because the logging options can't be changed whilst FSUIPC is running!

 

4. The following step was loading my FSX, I opened FSUIPC and tried to assign some buttons and axes but my Saitek Yoke and TPM didn't move! I created a new profile, I pressed some keys, I tried to calibrate, but the problem was exactly the same. FSUIPC didn't recognize my Saitek Hardware one more time.

 

 

I don't know why you expected there to be any difference! The ONLY thing I changed was to add more logging, as I keep saying!

 

5. I posted here my INI file when I closed FSX as you told me (you can see the following lines in it)

 

No, I told you to post the LOG file, which would have provided more information if you had added the lines to the INI file correctly BEFORE running FS!

 

It seems you don't actually read what I write. It is nothing to do with technical misunderstandings, it is things like reading "INI" when I write "LOG".

 

Today I will try to read this post again and do everything you told me. If it doesn't work, I will revert to my old FSUIPC version 4.80.

 

If you do that then I cannot support you at all in future. I want to solve the problem in case anyone else gets it too. But I really cannot help unless you do the simple things I ask so I can obtain more information. Don't you see this? When you read the messages please read the actual words thast are there, like "LOG" instead of "INI". And do not edit the INI file when FS is running.

 

I do apologise for all the inconvenience.

 

That's okay. It isn't inconvenient for me, but it is for you, and because of this mess it could now be a week before it goes further as I am very busy for these two days (it is my 70th birthday today), and then I'm away till next Monday. However, I will try to get back later if I can.

 

Regards

Pete


  • 0

#13 franygal

franygal

    Member

  • Members
  • PipPip
  • 24 posts
  • LocationESPAÑA

Posted 27 August 2013 - 08:25 AM

Ok Pete, I will read everything again and I will do all this you told me, step by step. I will post my log file here this afternoon (I can't do it now because I'm in my job) but before do this, I will delete all my old FSUIPC files (version 4.80) from my Modules folder and lines from my FSX.CFG to do a clean install again.

 

Thank you very much for your replies and support. Happy birthday for your 70 and I hope that we can continue posting here next week.

 

Kind regards,

 

Fran


  • 0

#14 franygal

franygal

    Member

  • Members
  • PipPip
  • 24 posts
  • LocationESPAÑA

Posted 28 August 2013 - 01:55 PM

Hello again Pete,

 

Below you can find the requested log files after to do you told me. I hope this can help you more.

 

Regards,

 

Fran

 

 

Installer for FSUIPC4.DLL version 4.91

Looking in registry for FSX install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
     Parameter"SetupPath"
... >>>  OK! FOUND FSX!  <<< ...
Looking in registry for ESP install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft ESP\1.0
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\ESP
     Parameter"AppPath"
... NOT found! ...
Looking in registry for Prepar3D install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\Prepar3D
     Parameter"AppPath"
... NOT found! ...
===========================================================

INSTALLATION FOR FSX:
SetupPath="E:\Microsoft Flight Simulator X\"
Checking version of FSX.EXE:
... Version 10.0.61637.0  (Need at least 10.0.60905.0)
Checking compatibility with installed SimConnect:
    Found SimConnect build 60905 (Original)
    Found SimConnect build 61242 (SP1 May07)
    Found SimConnect build 61259 (Acc/SP2 Oct07)
Checking if there's already a version of FSUIPC4 installed in:
       E:\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL
... Version 4.800 found.
FSX Modules folder already exists.
Okay -- installed FSUIPC4 into "E:\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path:
... found as "C:\Users\Usuario\AppData\Roaming"
Now finding \Microsoft\FSX\FSX.CFG for all users, including this one
Looking in "C:\Users\All Users\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Default\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Default User\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Public\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\UpdatusUser\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Usuario\AppData\Roaming"
Found FSX.CFG in "C:\Users\Usuario\AppData\Roaming\Microsoft\FSX\FSX.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
     (for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... There is a SimConnect.XML, checking for "local" section.
... "local" section already exists, file not modified.
"Modules\FSUIPC Documents" folder already exists.
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC4 User Guide.pdf" okay
   Installed "FSUIPC4 for Advanced Users.pdf" okay
   Installed "FSUIPC4 History.pdf" okay
   Installed "List of FSX controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
===========================================================

All installer tasks completed.
Registration check for FSUIPC4 was successful! (result code 00)

*************** End of Install Log ***************

 

 

 

 

 

********* FSUIPC4, Version 4.913a by Pete Dowson *********
Running inside FSX
Module base=63A30000
User Name="FRANCISCO JAVIER GALÁN DÍAZ"
User Addr="fran_galan@yahoo.es"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
      187 System time = 28/08/2013 15:48:56
      187 FLT path = "C:\Users\Usuario\Documents\Archivos de Flight Simulator X\"
      249 Trying to connect to SimConnect Acc/SP2 Oct07 ...
      249 FS path = "E:\Microsoft Flight Simulator X\"
      546 #### Initialising Dlrectinput Axis Scanning ...
      546    joyGetDevCaps for device 2 returned error 165 [000000A5]
      546    joyGetDevCaps for device 3 returned error 165 [000000A5]
      546    joyGetDevCaps for device 4 returned error 165 [000000A5]
      546    joyGetDevCaps for device 5 returned error 165 [000000A5]
      546    joyGetDevCaps for device 6 returned error 165 [000000A5]
      546    joyGetDevCaps for device 7 returned error 165 [000000A5]
      546    joyGetDevCaps for device 8 returned error 165 [000000A5]
      546    joyGetDevCaps for device 9 returned error 165 [000000A5]
      546    joyGetDevCaps for device 10 returned error 165 [000000A5]
      546    joyGetDevCaps for device 11 returned error 165 [000000A5]
      546    joyGetDevCaps for device 12 returned error 165 [000000A5]
      546    joyGetDevCaps for device 13 returned error 165 [000000A5]
      546    joyGetDevCaps for device 14 returned error 165 [000000A5]
      546    joyGetDevCaps for device 15 returned error 165 [000000A5]
      546 #### Completed Dlrectinput Axis Scanning
      546 LogOptions=50000000 0A000091
      546 SIM1 Frictions access gained
      546 Wind smoothing fix is fully installed
      546 G3D.DLL fix attempt installed ok
      546 SimConnect_Open succeeded: waiting to check version okay
      546 Trying to use SimConnect Acc/SP2 Oct07
     2777 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)
     2777 Initialising SimConnect data requests now
     2777 FSUIPC Menu entry added
     2823 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y
     2823 E:\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT
     2823 E:\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR
     2964 Memory in use: 554Mb, Avail=3542Mb
    11372 E:\Microsoft Flight Simulator X\SimObjects\Airplanes\Carenado Cessna 182Q\Carcessna182Q.AIR
    31184 Weather Mode now = Theme
    64413 Memory in use: 992Mb, Avail=3103Mb
    94022 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N
    94474 System time = 28/08/2013 15:50:30, Simulator time = 13:32:35 (18:32Z)
    94474 Aircraft="Carenado CESSNA Skylane 182Q AirHispania"
    94490 KEYDOWN: VK=123, Waiting=0, Repeat=N, Shifts=0
    94490 .. Key not programmed -- passed on to FS
    94646 KEYUP: VK=123, Waiting=0
    94911 KEYDOWN: VK=123, Waiting=0, Repeat=N, Shifts=0
    94911 .. Key not programmed -- passed on to FS
    95004 KEYUP: VK=123, Waiting=0
    95145 KEYDOWN: VK=123, Waiting=0, Repeat=N, Shifts=0
    95145 .. Key not programmed -- passed on to FS
    95316 KEYUP: VK=123, Waiting=0
    95488 Starting everything now ...
    95488 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N
    95582 KEYDOWN: VK=123, Waiting=0, Repeat=N, Shifts=0
    95582 .. Key not programmed -- passed on to FS
    95753 KEYUP: VK=123, Waiting=0
    96018 KEYDOWN: VK=123, Waiting=0, Repeat=N, Shifts=0
    96018 .. Key not programmed -- passed on to FS
    96206 KEYUP: VK=123, Waiting=0
    96830 Advanced Weather Interface Enabled
   124863 Memory in use: 1451Mb, Avail=2645Mb
   131197 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y
   131197 Sim stopped: average frame rate for last 37 secs = 31.2 fps
   131197 #### Initialising Dlrectinput Axis Scanning ...
   131197    joyGetDevCaps for device 2 returned error 165 [000000A5]
   131197    joyGetDevCaps for device 3 returned error 165 [000000A5]
   131197    joyGetDevCaps for device 4 returned error 165 [000000A5]
   131197    joyGetDevCaps for device 5 returned error 165 [000000A5]
   131197    joyGetDevCaps for device 6 returned error 165 [000000A5]
   131197    joyGetDevCaps for device 7 returned error 165 [000000A5]
   131197    joyGetDevCaps for device 8 returned error 165 [000000A5]
   131197    joyGetDevCaps for device 9 returned error 165 [000000A5]
   131197    joyGetDevCaps for device 10 returned error 165 [000000A5]
   131197    joyGetDevCaps for device 11 returned error 165 [000000A5]
   131197    joyGetDevCaps for device 12 returned error 165 [000000A5]
   131197    joyGetDevCaps for device 13 returned error 165 [000000A5]
   131197    joyGetDevCaps for device 14 returned error 165 [000000A5]
   131197    joyGetDevCaps for device 15 returned error 165 [000000A5]
   131197 #### Completed Dlrectinput Axis Scanning
   138107 *** Entered Buttons option page ***
   145689 *** Exiting Buttons option page ***
   145908 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N
   149184 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y
   157358 System time = 28/08/2013 15:51:33, Simulator time = 13:33:12 (18:33Z)
   157358 *** FSUIPC log file being closed
Average frame rate for running time of 38 secs = 31.2 fps
G3D fix: Passes 17886, Null pointers 0, Bad pointers 0, Separate instances 0
Memory managed: 21 Allocs, 21 Freed
********* FSUIPC Log file closed ***********


  • 0

#15 Pete Dowson

Pete Dowson

    Advanced Member

  • Moderators
  • 27,294 posts
  • LocationNear Stoke-on-Trent, UK

Posted 28 August 2013 - 02:33 PM

Below you can find the requested log files after to do you told me. I hope this can help you more.

 

I didn't need the Install log.

 

The main log is odd, as although it shows that joysticks 0 and 1 are detected without error, it never sees any input from them whatsoever. On my system with Saitek devices connected, the log rapidly fills with many messages showing input from those devices.

 

You don't have any other software installed for those dvices, do you? Saitek software?

 

It looks like I'm going to have to add more logging in a different area to see why there are no returns from these devices. I've not seen anything like this before. But unfortunately I'm away soon for a few days -- back Monday. So I can't get to it till then. I suggest you use whatever works for now and I'll get back to you then.

 

Regards

Pete


  • 0

#16 franygal

franygal

    Member

  • Members
  • PipPip
  • 24 posts
  • LocationESPAÑA

Posted 28 August 2013 - 04:11 PM

I only have installed "SPAD" software for my Saitek Pro Flight Switch Panel and the latest and original drivers for my Saitek Yoke and TPM. While you are away, I'm going to install my old FSUIPC version 4.80 and I will update it with the 4.90 version, which also work fine for me.

 

Thank you for your reply.

 

Regards,

 

Fran


  • 0

#17 Pete Dowson

Pete Dowson

    Advanced Member

  • Moderators
  • 27,294 posts
  • LocationNear Stoke-on-Trent, UK

Posted 28 August 2013 - 08:11 PM

... and I will update it with the 4.90 version, which also work fine for me.

 

Er ... this is NEW information! So 4.90 works for you whilst 4.91 does not? That's amazing! There's really very little different between 4.90 and 4.91 but it is a much better clue than all the millions of little changes since 4.80!

 

I'll look again next week with this in mind!

 

Pete


  • 0

#18 franygal

franygal

    Member

  • Members
  • PipPip
  • 24 posts
  • LocationESPAÑA

Posted 29 August 2013 - 07:40 AM

Yes Pete!, I could check it yesterday. I was doing some "experiments". First of all I tried to uninstall my SPAD software (just in case...) and reinstall FSUIPC 4.91 without it, but didn't work, so I decided to delete all my FSUIPC files again (from Modules folder and lines from my Fsx.cfg) and reinstall my older version 4.80. Later, I tried to download FSUIPC 4.90 version to do a test and mysteriously it worked very fine! All my axes are calibrated and working, also the buttons.

 

No problem Pete, I can wait!

 

Thank you and regards,

 

Fran


  • 0

#19 Pete Dowson

Pete Dowson

    Advanced Member

  • Moderators
  • 27,294 posts
  • LocationNear Stoke-on-Trent, UK

Posted 29 August 2013 - 10:47 AM

Just caught this before leaving ...

 

Yes Pete!, I could check it yesterday. I was doing some "experiments". First of all I tried to uninstall my SPAD software (just in case...) and reinstall FSUIPC 4.91 without it, but didn't work, so I decided to delete all my FSUIPC files again (from Modules folder and lines from my Fsx.cfg) and reinstall my older version 4.80. Later, I tried to download FSUIPC 4.90 version to do a test and mysteriously it worked very fine! All my axes are calibrated and working, also the buttons.

 

Could you now just try slipping the 4.913a DLL in (download: FSUIPC 4.913a). Maybe it was something to do with the older files.

 

Else, if there's something only changed between 4.90 and 4.91 it might be easier for me to locate.

 

Back Sunday or Monday ...

 

Regards

Pete


  • 0

#20 franygal

franygal

    Member

  • Members
  • PipPip
  • 24 posts
  • LocationESPAÑA

Posted 29 August 2013 - 11:49 AM

Ok. I will copy your DLL file from 4.913a to my Modules folder, overwriting the existing. After that, I will post my log file here. May I have to add these lines again (in General)?

 

Debug=Please
LogButtonsKeys=Yes
LogAxes=Yes
LogExtras=xA00008

 

 

Regards,

 

Fran


  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


About simFlight - simflight.com - simflight.de - simflight.fr - simflight.nl - simflight.pt - simflight.es - simflight.it - simflight.jp - simrussia.com - simMarket