FSUIPC4.927a+Hifi ASN+A2A C172R+CTD

[snalz]

Hi Pete, 

 

i use a prior stable two computers network configuration for FSX SP2.

 

Since installed new hifi AS2012 to ASN upgrade in combination with an FSUIPC installer update 4.927a i get FSX CTD´s within 30 minutes into every flight. At one flight "sim1.dll" was the error module according to win7 event screen.

 

Here several log files and the CTD event report so you can read out a possible error source?

 

Kind Regards

 

Nico

 

 

 

Installer for FSUIPC4.DLL version 4.927a

Looking in registry for FSX install path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
Parameter"SetupPath"
... >>> OK! FOUND FSX! <<< ...
Looking in registry for ESP install path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft ESP\1.0
Parameter"SetupPath"
Not there, so looking in:
HKEY_CURRENT_USER\ESP
Parameter"AppPath"
... NOT found! ...
Looking in registry for Prepar3D install path:
HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D
Parameter"SetupPath"
Not there, so looking in:
HKEY_CURRENT_USER\Prepar3D
Parameter"AppPath"
... NOT found! ...
Looking in registry for Prepar3D v2 install path:
HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2
Parameter"SetupPath"
Not there, so looking in:
HKEY_CURRENT_USER\Prepar3D v2
Parameter"AppPath"
... NOT found! ...
===========================================================

INSTALLATION FOR FSX:
SetupPath="D:\Programme\Microsoft Games\Microsoft Flight Simulator X"
Checking version of the FSX EXE:
... Version 10.0.61472.0 (Need at least 10.0.60905.0)
Checking compatibility with installed SimConnect:
Found SimConnect build 60905 (Original)
Found SimConnect build 61242 (SP1 May07)
Found SimConnect build 61259 (Acc/SP2 Oct07)
Checking if there's already a version of FSUIPC4 installed in:
D:\Programme\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL
... No previous valid version found.
FSX Modules folder already exists.
Okay -- installed FSUIPC4 into "D:\Programme\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path:
... found as "C:\Users\Anwender\AppData\Roaming"
Now finding \Microsoft\FSX\FSX.CFG for all users, including this one
Looking in "C:\Users\Administrator\AppData\Roaming"
... No FSX.CFG there
Looking in "C:\Users\All Users\AppData\Roaming"
... No FSX.CFG there
Looking in "C:\Users\Anwender\AppData\Roaming"
Found FSX.CFG in "C:\Users\Anwender\AppData\Roaming\Microsoft\FSX\FSX.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
(for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... There is a SimConnect.XML, checking for "local" section.
... "local" section already exists, file not modified.
Looking in "C:\Users\Default\AppData\Roaming"
... No FSX.CFG there
Looking in "C:\Users\Default User\AppData\Roaming"
... No FSX.CFG there
Looking in "C:\Users\Public\AppData\Roaming"
... No FSX.CFG there
Looking in "C:\Users\UpdatusUser\AppData\Roaming"
... No FSX.CFG there
"Modules\FSUIPC Documents" folder created okay!
Now installing additional files into the "Modules\FSUIPC Documents" folder:
Installed "FSUIPC4 User Guide.pdf" okay
Installed "FSUIPC4 for Advanced Users.pdf" okay
Installed "FSUIPC4 History.pdf" okay
Installed "List of FSX and P3D controls.pdf" okay
Installed "FSUIPC Lua Library.pdf" okay
Installed "FSUIPC Lua Plug-Ins.pdf" okay
Installed "Lua License.pdf" okay
Installed "Lua Plugins for VRInsight Devices.pdf" okay
Installed "LuaFileSystem.pdf" okay
Installed "Example LUA plugins.zip" okay
Installed "Offset Mapping for PMDG 737NGX.pdf" okay
Installed "FSUIPC4 Offsets Status.pdf" okay
===========================================================

All installer tasks completed.
Registration check for FSUIPC4 was successful! (result code 00)

*************** End of Install Log ***************




********* FSUIPC4, Version 4.927a by Pete Dowson *********
Running inside FSX on Windows 7
Module base=6D6E0000
User Name="xxx"
User Addr="xxx"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
219 System time = 27/12/2013 19:29:47
219 FLT path = "C:\Users\Anwender\Documents\Flight Simulator X-Dateien\"
250 Trying to connect to SimConnect Acc/SP2 Oct07 ...
250 FS path = "D:\Programme\Microsoft Games\Microsoft Flight Simulator X\"
624 Run: "D:\Programme\Microsoft Games\Microsoft Flight Simulator X\Modules\linda.exe"
656 LogOptions=00000000 00000001
656 SIM1 Frictions access gained
656 Wind smoothing may be by ASN, not FSUIPC, if it is running
656 Will switch smoothing action when ASN starts/stops
656 G3D.DLL fix attempt installed ok
656 SimConnect intercept for texts and menus installed ok
656 SimConnect_Open succeeded: waiting to check version okay
656 Trying to use SimConnect Acc/SP2 Oct07
4665 Running in "Microsoft Flight Simulator X", Version: 10.0.61472.0 (SimConnect: 10.0.61259.0)
4665 Initialising SimConnect data requests now
4665 FSUIPC Menu entry added
4696 C:\Users\Anwender\Documents\Flight Simulator X-Dateien\C172 c&d Kassel 2013.FLT
4696 D:\Programme\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\C172\Cessna172SP.AIR
62151 System time = 27/12/2013 19:30:49, Simulator time = 14:29:48 (13:29Z)
62354 Aircraft="Cessna Skyhawk 172SP Paint3"
65256 ASN Running? Smoothing is by ASN
66628 Starting everything now ...
66628 LUA.0: beginning "D:\Programme\Microsoft Games\Microsoft Flight Simulator X\Modules\ipcReady.lua"
66628 LUA.0: ended "D:\Programme\Microsoft Games\Microsoft Flight Simulator X\Modules\ipcReady.lua"
66628 AES Link established
66628 LUA.1:


66628 LUA.1: [iNIT]LINDA:: Loading...
66738 LUA.1: LINDA:: Aircraft: Cessna Skyhawk 172SP Paint3
66738 LUA.1: LINDA:: Aircraft module detected: FSX Default
66784 LUA.0: LINDA:: AivlaSoft library loaded...
66784 LUA.0: LINDA:: FSX standard library loaded...
66784 LUA.0: LINDA:: IAO library loaded...
66800 LUA.0: LINDA:: RealityXP library loaded...
66800 LUA.0: LINDA:: A2A MAP library loaded...
66878 LUA.0: LINDA:: Loading a fallback joysticks config...
66894 LUA.0: LINDA:: Loading FSX Default joysticks config...
66894 LUA.0: LINDA:: Module: FSX Default Started...
66909 LUA.0: LINDA:: Ready to go, Captain!
66909 LUA.0: LINDA::
67424 LUA.0: LINDA:: LVars watching list cleared...
67518 LUA.0: LINDA:: Offsets watching list cleared!
67814 Weather Mode now = Theme
67814 Advanced Weather Interface Enabled
87923 D:\Programme\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\A2A_C172\C172.AIR
95723 Aircraft="C172R F-GOAP"
95754 LUA.1: LINDA:: Aircraft: C172R F-GOAP
95754 LUA.1: LINDA:: Aircraft module detected: A2A_C172
95847 LUA.0: LINDA:: AivlaSoft library loaded...
95847 LUA.0: LINDA:: FSX standard library loaded...
95863 LUA.0: LINDA:: IAO library loaded...
95863 LUA.0: LINDA:: RealityXP library loaded...
95863 LUA.0: LINDA:: A2A MAP library loaded...
96003 LUA.0: LINDA:: DSP MODE toggle: 1
96019 LUA.0: LINDA:: Loading a fallback joysticks config...
96019 LUA.0: LINDA:: Module: A2A_C172 Started...
96050 LUA.0: LINDA:: Ready to go, Captain!
96050 LUA.0: LINDA::



LINDA log file:


Init...
Can start...
Creating forms...
Font added
Sysconfig loaded
VRI config loaded
Selector initialized
Dev configs loaded
News read
--> Main form: done!
--> Viewer form: done!
--> Input form: done!
--> FSX controls form: done!
--> Console form: done!
--> Macros form: done!
--> Module form: done!
--> Editor form: done!


--- NEW LOGGING SESSION -----------




FSX CTD crash:

Problemsignatur:
Problemereignisname: APPCRASH
Anwendungsname: fsx.exe
Anwendungsversion: 10.0.61472.0
Anwendungszeitstempel: 475e17d3
Fehlermodulname: StackHash_e16f
Fehlermodulversion: 0.0.0.0
Fehlermodulzeitstempel: 00000000
Ausnahmecode: c0000005
Ausnahmeoffset: 74dcc9f5
Betriebsystemversion: 6.1.7601.2.1.0.256.1
Gebietsschema-ID: 1031
Zusatzinformation 1: e16f
Zusatzinformation 2: e16f26ed920b77e80b57d6228a772083
Zusatzinformation 3: 7aea
Zusatzinformation 4: 7aea2f3a3b6357271254157135999943

Protokollname: Application
Quelle: Application Error
Datum: 27.12.2013 20:41:40
Ereignis-ID: 1000
Aufgabenkategorie:(100)
Ebene: Fehler
Schlüsselwörter:Klassisch
Benutzer: Nicht zutreffend
Computer: FSXhauptrechner
Beschreibung:
Name der fehlerhaften Anwendung: fsx.exe, Version: 10.0.61472.0, Zeitstempel: 0x475e17d3
Name des fehlerhaften Moduls: unknown, Version: 0.0.0.0, Zeitstempel: 0x00000000
Ausnahmecode: 0xc0000005
Fehleroffset: 0x751bc9f5
ID des fehlerhaften Prozesses: 0x320
Startzeit der fehlerhaften Anwendung: 0x01cf03318503031c
Pfad der fehlerhaften Anwendung: D:\Programme\Microsoft Games\Microsoft Flight Simulator X\fsx.exe
Pfad des fehlerhaften Moduls: unknown
Berichtskennung: e7ba3fce-6f2e-11e3-9715-bcaec5753197
Ereignis-XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-27T19:41:40.000000000Z" />
<EventRecordID>115470</EventRecordID>
<Channel>Application</Channel>
<Computer>FSXhauptrechner</Computer>
<Security />
</System>
<EventData>
<Data>fsx.exe</Data>
<Data>10.0.61472.0</Data>
<Data>475e17d3</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>751bc9f5</Data>
<Data>320</Data>
<Data>01cf03318503031c</Data>
<Data>D:\Programme\Microsoft Games\Microsoft Flight Simulator X\fsx.exe</Data>
<Data>unknown</Data>
<Data>e7ba3fce-6f2e-11e3-9715-bcaec5753197</Data>
</EventData>
</Event>




FSUIPC.ini part of it


[General]
UpdatedByVersion=4927a
History=19YF24HD4P2K9PKIESK59
InitDelayDevicesToo=No
InterceptTextMenu=Yes
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
DeleteVehiclesForAES=Yes
AutoScanDevices=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=0
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=Yes
OOMcheck=Yes
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
LuaRerunDelay=66
Console=No
FSVersionUsed="Microsoft Flight Simulator X",10.0.61472.0
SimConnectUsed=10.0.61259.0

[JoyNames]
AutoAssignLetters=Yes

A=Saitek Pro Flight Yoke
A.GUID={5E6E0C20-4ED0-11E1-8001-444553540000}
B=Saitek Pro Flight Throttle Quadrant
B.GUID={DA8C2190-A4CA-11DF-8001-444553540000}
C=Saitek Pro Flight Throttle Quadrant
C.GUID={DA8FF220-A4CA-11DF-8002-444553540000}
D=SideWinder Force Feedback 2 Joystick
D.GUID={707640B0-A222-11DF-8001-444553540000}
E=Saitek Pro Flight Rudder Pedals
E.GUID={AA09FD00-54E9-11E1-8001-444553540000}
0=Saitek Pro Flight Yoke
0.GUID={5E6E0C20-4ED0-11E1-8001-444553540000}
1=Saitek Pro Flight Throttle Quadrant
1.GUID={DA8C2190-A4CA-11DF-8001-444553540000}
2=Saitek Pro Flight Throttle Quadrant
2.GUID={DA8FF220-A4CA-11DF-8002-444553540000}
3=SideWinder Force Feedback 2 Joystick
3.GUID={707640B0-A222-11DF-8001-444553540000}
4=Saitek Pro Flight Rudder Pedals
4.GUID={AA09FD00-54E9-11E1-8001-444553540000}


[buttons]
ButtonRepeat=50,10

[MacroFiles]
1=4X_DA20-100
2=767
3=iFly737
4=MADDOG2
5=mjc8q400

[LuaFiles]
1=ipcReady
2=linda

[Programs]
RunIf1=D:\Programme\Microsoft Games\Microsoft Flight Simulator X\Modules\linda.exe

[AutoSave]
Next=1
Interval=600
Files=2
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No

[GPSout2]
GPSoutEnabled=No

[WideServer]
WideFSenabled=Yes

[sounds]
Path=D:\Programme\Microsoft Games\Microsoft Flight Simulator X\Sound\
Device1=Primärer Soundtreiber
Device2=Lautsprecher (2- SB X-Fi Xtreme Audio)

[Window.LUA display]
Docked=7347, 2457, 3575, 2548





Simconnect.xml at fsx server computer:

<?xml version="1.0" encoding="windows-1252"?>
<SimBase.Document Type="SimConnect" version="1,0">
<Descr>SimConnect</Descr>
<Filename>SimConnect.xml</Filename>
<Disabled>False</Disabled>
<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>IPv4</Protocol>
<Scope>global</Scope>
<Address>my FSX server adress</Address>
<MaxClients>64</MaxClients>
<Port>500</Port>
<MaxRecvSize>4096</MaxRecvSize>
<DisableNagle>False</DisableNagle>
</SimConnect.Comm>
<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>IPv4</Protocol>
<Scope>global</Scope>
<Address>my FSX server adress</Address>
<MaxClients>64</MaxClients>
<Port>6811</Port>
<MaxRecvSize>4096</MaxRecvSize>
<DisableNagle>False</DisableNagle>
</SimConnect.Comm>
<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>IPv4</Protocol>
<Scope>global</Scope>
<Address>my FSX server adress</Address>
<MaxClients>64</MaxClients>
<Port>445</Port>
<MaxRecvSize>4096</MaxRecvSize>
<DisableNagle>False</DisableNagle>
</SimConnect.Comm>
<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>IPv4</Protocol>
<Scope>global</Scope>
<Address>my FSX server adress</Address>
<MaxClients>64</MaxClients>
<Port>4506</Port>
<MaxRecvSize>4096</MaxRecvSize>
<DisableNagle>False</DisableNagle>
</SimConnect.Comm>
<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>Auto</Protocol>
<Scope>local</Scope>
</SimConnect.Comm>
</SimBase.Document>

 

"my FSX sever adress" at simconnect.xml is filled with the correct adress.

Edited December 28, 2013 by snalz

[Pete Dowson]

Since installed new hifi AS2012 to ASN upgrade in combination with an FSUIPC installer update 4.927a i get FSX CTD´s within 30 minutes into every flight. At one flight "sim1.dll" was the error module according to win7 event screen.

Here several log files and the CTD event report so you can read out a possible error source?

 

Unfortunately not as neither of the crash reports you provide actually identify a module.  I've usually found stackhash type errors, as one of yours is, are a result of overloading in FSX -- either memory corruption when the memory use is nearing a critical point, or some complex add-on or scenery.

 

If you believe it is related to ASN + FSUIPC, which you appear to imply, please make sure all weather options are turned off in FSUIPC and ASN is running before you start FSX. From what I've heard from HiFi this helps. I think they are looking at assorted reports like yours at the moment. I've also supplied them with an updated FSUIPC, which you can also try if you wish (link: FSUIPC4927e.zip) but I don't this will have anything to do with actual crashes, at least not from the FSUIPC side of things, so it may not help. I don't know -- HiFi are looking at it..

 

I'm just preparing to leave for a short holiday -- back on January 9th, so I'm afraid I won't be able to evaluate any more results in this matter for a while. Certainly ASN + FSUIPC 4.927a have behaved impeccably for me and friends on all flights since they were released, so I'm sure it is not a general problem and may actually not be attributed to either product. Whenever I've had the stackHash type error, which is rarely, I've found solutions lie in the direcxtion of reducing some of the loading on FS.

 

Regards

Pete

[snalz]

Thanks for reply Pete,

 

ok. But be so kind and confirm that my reports and posted files are free of any error sources.

 

Thanks

[Pete Dowson]

But be so kind and confirm that my reports and posted files are free of any error sources.

 

Sorry, I'm not really sure what you mean, but if you want me to find error messages then the only ones I see are the two crash reports you included.

 

Pete

[snalz]

I have my knowlage in real aviation, not in computers, sorry.

 

Beside the crash reports, do you see any error sources/wrong/missing entries at my attached log files, FSUIPC.ini ? Is eyerything ok?

[Pete Dowson]

Yes.

 

Got to go now ... back on Jan 9th...

Pete

 

[snalz]

...

<SimConnect.Comm>

<Disabled>False</Disabled>

<Protocol>IPv4</Protocol>

<Scope>global</Scope>

<Address>my FSX server adress</Address>

<MaxClients>64</MaxClients>

<Port>445</Port>

<MaxRecvSize>4096</MaxRecvSize>

<DisableNagle>False</DisableNagle>

</SimConnect.Comm>

...

 

"my FSX sever adress" at simconnect.xml is filled with the correct adress.

 

Hi Pete,

 

have a nice holiday .

 

@all

At my tests i did exactly the same flight several times to find a solution, now the flight was without any issue for the first time.

 

I did two things:

- Installed Pete´s new FSUIPC.dll (4927e)

- Deleted the quoted section of my "simconnect.XML" on FSX server computer. It seems that was my fault entering an additional port (445) for using Hifisim ASN. Hifisim documentation informed about that port but there is no need to modify any simconnect.XML if prior AS2012 was installed using port 500.

 

I think one of these things did it.

[Andydigital]

It is recommended that Simconnect should use port 500, port 445 is used by ASN's module called AS_Connect, so if you had Simconnect set to this too it's no wonder you had problems, only one program can use a single port at any one time.

[Andydigital]

Also looking at your first post with the Simconnect.xml, if yours really looks like that then it is surprising it works at all, you repeated the same code many times over with different ports in each section. Please see the ASN manual for the correct format of that file, yours is far too long.

[snalz]

Hi Andydigital,

 

the faulty entry was my manually inserted port 445 that collides with AS_Connect. It was a wrong interpretation of the ASN manual instructions.

All the other simconnect.XML entrys at my FSX server computer are ok.To remember i excluded nearly all possible programs to my client computer. This is my "general" simconnect.XML located in the same folder as FSX.cfg is located.

 

-Port 500 for AS2012 or/and ASN

-Port 6811 is IVAO IvAp

-Port 4506 is PlanG

 

Each of this excluded programms own simconnect file within its program folder is also edited manually inserting my FSX server adress.

 

Worked since years without bigger issues.

[snalz]

Also looking at your first post with the Simconnect.xml, if yours really looks like that then it is surprising it works at all, you repeated the same code many times over with different ports in each section. Please see the ASN manual for the correct format of that file, yours is far too long.

 

Hi Andydigital,

 

did i missunderstood your post or what do you mean? I use networked computer configuration and the ports within simconnect.XML are different ones. Did i something wrong? How should it be instead of my solution?

 

Kind regards

[Andydigital]

Your file looks like this, everything in red text can be deleted as it is not required.

 

<?xml version="1.0" encoding="windows-1252"?>
<SimBase.Document Type="SimConnect" version="1,0">
<Descr>SimConnect</Descr>
<Filename>SimConnect.xml</Filename>
<Disabled>False</Disabled>
<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>IPv4</Protocol>
<Scope>global</Scope>
<Address>my FSX server adress</Address>
<MaxClients>64</MaxClients>
<Port>500</Port>
<MaxRecvSize>4096</MaxRecvSize>
<DisableNagle>False</DisableNagle>
</SimConnect.Comm>
<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>IPv4</Protocol>
<Scope>global</Scope>
<Address>my FSX server adress</Address>
<MaxClients>64</MaxClients>
<Port>6811</Port>
<MaxRecvSize>4096</MaxRecvSize>
<DisableNagle>False</DisableNagle>
</SimConnect.Comm>
<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>IPv4</Protocol>
<Scope>global</Scope>
<Address>my FSX server adress</Address>
<MaxClients>64</MaxClients>
<Port>445</Port>
<MaxRecvSize>4096</MaxRecvSize>
<DisableNagle>False</DisableNagle>
</SimConnect.Comm>
<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>IPv4</Protocol>
<Scope>global</Scope>
<Address>my FSX server adress</Address>
<MaxClients>64</MaxClients>
<Port>4506</Port>
<MaxRecvSize>4096</MaxRecvSize>
<DisableNagle>False</DisableNagle>
</SimConnect.Comm>
<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>Auto</Protocol>
<Scope>local</Scope>
</SimConnect.Comm>
</SimBase.Document>

 

Here is what mine looks like;

 

<?xml version="1.0" encoding="Windows-1252"?>
<SimBase.Document Type="SimConnect" version="1,0">
 <Descr>SimConnect</Descr>
 <Filename>SimConnect.xml</Filename>
 <SimConnect.Comm>
  <Disabled>False</Disabled>
  <Protocol>IPv4</Protocol>
  <Scope>global</Scope>
  <Address>192.168.1.114</Address>
  <MaxClients>64</MaxClients>
  <Port>4506</Port>
  <MaxRecvSize>4096</MaxRecvSize>
  <DisableNagle>False</DisableNagle>
 </SimConnect.Comm>

<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>Auto</Protocol>
<Scope>local</Scope>
</SimConnect.Comm>
</SimBase.Document>

[snalz]

Here is what mine looks like;

 

<?xml version="1.0" encoding="Windows-1252"?>

<SimBase.Document Type="SimConnect" version="1,0">

 <Descr>SimConnect</Descr>

 <Filename>SimConnect.xml</Filename>

 <SimConnect.Comm>

  <Disabled>False</Disabled>

  <Protocol>IPv4</Protocol>

  <Scope>global</Scope>

  <Address>192.168.1.114</Address>

  <MaxClients>64</MaxClients>

  <Port>4506</Port>

  <MaxRecvSize>4096</MaxRecvSize>

  <DisableNagle>False</DisableNagle>

 </SimConnect.Comm>

<SimConnect.Comm>

<Disabled>False</Disabled>

<Protocol>Auto</Protocol>

<Scope>local</Scope>

</SimConnect.Comm>

</SimBase.Document>

 

Hi Andydigital, nice to get this information.

 

Questions:

1.: It seems your only port is 4506 that means PlanG. And all the other ports? ASN -> 500, IvAp -> 6811 ? Do you also use these addons in networked computer configuration?

[Andydigital]

Simconnect only needs one connection and one port to service all addons that use simconnect as a means of interfacing with FSX, you are not required to open multiple ports for diffferent programs.

[snalz]

Additional here is the rest of my present Network configuration to make sure my modification i now will carry out are correct and complete:

 

FSX Server

 

simconnect.XML    path: C:\Users\[user]\AppData\Roaming\Microsoft\FSX \SimConnect.xml - This will now get your modified version of my current one

<?xml version="1.0" encoding="Windows-1252"?>
<SimBase.Document Type="SimConnect" version="1,0">
<Descr>SimConnect</Descr>
<Filename>SimConnect.xml</Filename>
<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>IPv4</Protocol>
<Scope>global</Scope>
<Address>my FSX server adress</Address>
<MaxClients>64</MaxClients>
<Port>4506</Port>
<MaxRecvSize>4096</MaxRecvSize>
<DisableNagle>False</DisableNagle>
</SimConnect.Comm>

<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>Auto</Protocol>
<Scope>local</Scope>
</SimConnect.Comm>
</SimBase.Document>

 

 

simconnect.ini    path: C:\Users\[user]\Documents\Flight Simulator X-Files\

 

[simConnect]
level=verbose
console=0
;RedirectStdOutToConsole=1
;OutputDebugString=1
;file=c:\simconnect%03u.log
;file_next_index=0
;file_max_index=9

 

 

FSX client computer

 

 

simconnect.cfg   path: C:\Users\[user]\Documents

 

[simConnect]
Protocol=IPv4
Address=my FSX server adress

Port=500
MaxReceiveSize=4096
DisableNagle=0

[simConnect.1]
Protocol=IPv4
Address=my FSX server adress
Port=6811
MaxReceiveSize=4096
DisableNagle=0

[simConnect.2]
Protocol=IPv4
Address=my FSX server adress
Port=4506
MaxReceiveSize=4096
DisableNagle=0

 

 

Additional simconnect file at client in IvAp program folder:

 

simconnect.cfg   path: C:\Program Files (x86)\IVAO\IvAp v2 -> without entering my FSX server adress, IvApV2 does not connect online at clients computer

 

[simConnect]
Protocol=IPv4
Address=my FSX server adress
Port=6811
MaxReceiveSize=4096
DisableNagle=0

 

 

Could you please confirm/correct that everthing is placed where it should be?

 

Kind regards

[Andydigital]

See my previous post, you only require one port for all programs, I don't know where you got the simconnect.1 simconnect.2 business from but its not required.

[snalz]

See my previous post, you only require one port for all programs, I don't know where you got the simconnect.1 simconnect.2 business from but its not required.

 

Many thanks, ok Andy. So my further actions are: Marked in red color below

 

Additional here is the rest of my present Network configuration to make sure my modification i now will carry out are correct and complete:

 

FSX Server

 

simconnect.XML    path: C:\Users\[user]\AppData\Roaming\Microsoft\FSX \SimConnect.xml - This will now get your modified version of my current one

<?xml version="1.0" encoding="Windows-1252"?>

<SimBase.Document Type="SimConnect" version="1,0">

<Descr>SimConnect</Descr>

<Filename>SimConnect.xml</Filename>

<SimConnect.Comm>

<Disabled>False</Disabled>

<Protocol>IPv4</Protocol>

<Scope>global</Scope>

<Address>my FSX server adress</Address>

<MaxClients>64</MaxClients>

<Port>4506</Port>

<MaxRecvSize>4096</MaxRecvSize>

<DisableNagle>False</DisableNagle>

</SimConnect.Comm>

<SimConnect.Comm>

<Disabled>False</Disabled>

<Protocol>Auto</Protocol>

<Scope>local</Scope>

</SimConnect.Comm>

</SimBase.Document>

 

= OK

 

 

simconnect.ini    path: C:\Users\[user]\Documents\Flight Simulator X-Files\    -> the file now gets completely deleted ?

 

[simConnect]

level=verbose

console=0

;RedirectStdOutToConsole=1

;OutputDebugString=1

;file=c:\simconnect%03u.log

;file_next_index=0

;file_max_index=9

 

 

FSX client computer

 

 

simconnect.cfg   path: C:\Users\[user]\Documents  -> the file now gets completely deleted ?

 

[simConnect]

Protocol=IPv4

Address=my FSX server adress

Port=500

MaxReceiveSize=4096

DisableNagle=0

[simConnect.1]

Protocol=IPv4

Address=my FSX server adress

Port=6811

MaxReceiveSize=4096

DisableNagle=0

[simConnect.2]

Protocol=IPv4

Address=my FSX server adress

Port=4506

MaxReceiveSize=4096

DisableNagle=0

 

 

Additional simconnect file at client in IvAp program folder:

 

simconnect.cfg   path: C:\Program Files (x86)\IVAO\IvAp v2 -> without entering my FSX server adress, IvApV2 does not connect online at clients computer -> the file now gets completely deleted ?

 

[simConnect]

Protocol=IPv4

Address=my FSX server adress

Port=6811

MaxReceiveSize=4096

DisableNagle=0

 

 

Could you please confirm/correct that everthing is placed where it should be?

 

Kind regards

 

In the end there is only one simconnect.XML file left at FSX server computer and ASN,IvAp and PlanG will work in networked configuration? Only for my clarification. Again, i can get real aircrafts flying but not connecting two FSX computers for networked operation. Sorry for that, it is not my domain   :???:

[Andydigital]

Make backups of everything just in case it does stop working and you can then restore everything, but yes by my understanding of Simconnect most of the above is correct. Do not delete the simconnect.ini file, its not doing any harm, I believe that is just for logging purposes, so removing it won't do an harm either.

 

Also this below needs the red section removing, and the edit needs making in orange;

 

simconnect.cfg   path: C:\Users\[user]\Documents  -> the file now gets completely deleted ?

 

[simConnect]
Protocol=IPv4
Address=my FSX server adress

Port=500 <-------- change this to 4506 the same as the simconnect.xml above.
MaxReceiveSize=4096
DisableNagle=0

[simConnect.1]
Protocol=IPv4
Address=my FSX server adress
Port=6811
MaxReceiveSize=4096
DisableNagle=0

[simConnect.2]
Protocol=IPv4
Address=my FSX server adress
Port=4506
MaxReceiveSize=4096
DisableNagle=0

 

 

 

simconnect.cfg   path: C:\Program Files (x86)\IVAO\IvAp v2 -> without entering my FSX server adress, IvApV2 does not connect online at clients computer -> the file now gets completely deleted ?

 

Yes as far as I understand it you shouldn't need the above in the IVAP folder. As I said though make backups of stuff that you delete so you can restore things if my advice is bad, I'm fairly certain its not though.

[snalz]

Thanks,

 

my first short test shows, that IvAp does not connect. All the other client computer programs seems to work.

 

But what me makes perplex is that each user manuals (AS2012,(ASN), IvAp, FsMap) have a special section where simconnect network configuration is described.

Every manual says that both, simconnect.XML (FSX server) and simconnect.cfg (client) has to be modified as per manual. So recently both files looks like my corrected previous versions.

 

Additionally am wondering that FsMap manual advices "port 500" as well as Hifisim AS2012/ASN. Doesn´t same port 500 for two different client programs disturb? 

[Andydigital]

I don't fly online so I have no experience with IVAP, but it may be a unique case in that it expects to find the simconnect.cfg file in its own folder, simply make a copy of the simconnect.cfg file from your Documents folder and paste it to the IVAP folder you mention above. Hopefully that fixes it.

 

All apps should be using the same Simconnect port number, in your case 4506. Simconnect is more or less the same as WideFS from FSUIPC, i.e. only one port it used to link the FS server PC to the Client PC i.e. where you are running your maps and other FS related addons. It doesn't matter what the port number is as long as it is configured the same at both FSX server and client PC. The port must also must not be being used by some other program/processes that are not related to simconnect.  I know that sounds confusing, but multiple programs designed to use Simconnect can share the same port, other none FS programs that don't use Simconnect cannot share ports at the same time.

[snalz]

Hi Andydigital,

 

i do not understand all the background - but i really do not want to know it. I simply want to fly using networked configuration  :razz: . I am not really sure if anybody knows exactly how the configs should be look like. And if it did, i would be very happy someone can confirm a correct config.

 

Ok, good to know that you do not use IvAp, so there is a difference between our basic config. I am still confused about your version that contrary to the IvAp/AS2012/ASN/FsMap- manuals there is no need to enter the ports as described.

 

I think simconnect uses port 6810, right?

[Andydigital]

It can use any port you like as long as there is nothing else on your PC that is already using that port for something else unrelated to FSX. Use the default MSFS selected port of 4506.

 

By the way my name is Andy, its in my signature, Andydigital is just my screen name.

[snalz]

Thanks,

 

my first short test shows, that IvAp does not connect. All the other client computer programs seems to work.

 

But what me makes perplex is that each user manuals (AS2012,(ASN), IvAp, FsMap) have a special section where simconnect network configuration is described.

Every manual says that both, simconnect.XML (FSX server) and simconnect.cfg (client) has to be modified as per manual. So recently both files looks like my corrected previous versions.

 

Additionally am wondering that FsMap manual advices "port 500" as well as Hifisim AS2012/ASN. Doesn´t same port 500 for two different client programs disturb? 

 

After this try (see above) i went back to my default files. So at FSX server computer i inserted my restored simconnect.XML. At Client computer i inserted my restored simconnect.cfg.

 

Simconnect now does not work anymore. "AItraffic.exe" works at FSX Server computer, but not at Client computer. Cannot connect from Client to Server (planG/IvAp/ASN) 

 

What to do now??

[snalz]

So, now i am back at my previous configuration without Port 445 within simconnect files. Windows restore function gave me the chance to restore client´s computer to a two days old state.

[snalz]

Still have no solution for my regular "StackHash_e16f" CTD´s as described at initial post. Checked some different solutions or tried to find any errors.

Sometimes after 30min, 1 hour or 2 hours that stackhash CTD accures. VAS is below 2,2 Gb.

 

I have no idea what is causing that crashes after ASN was installed. Additional i installed Majestic DHD8 Update, but never loaded the plane into FSX since the update installation.