Still Problems to assign Axis in FSX for FSUIPC

[Hofer]

Hi guys,

 

I still have a Problem, with my FSUIPC. I use Windows 8.1 and when I go to the FSUIPC in my FSX. I can not assign any axis.

What could be the Problem. Does anyone knows the Problem or what can I do? I use the latest Version of FSUIPC 4.931 and I have clicked on rescan. It still does not work.

 

 

 

Best regards

 

Florian Herrmann

[Pete Dowson]

I still have a Problem, with my FSUIPC. I use Windows 8.1 and when I go to the FSUIPC in my FSX. I can not assign any axis.

What could be the Problem. Does anyone knows the Problem or what can I do? I use the latest Version of FSUIPC 4.931 and I have clicked on rescan. It still does not work.

 

I assume you actually moving the lever you wish to assign to? Does FSX see your axes?

 

Please show me your FSUIPC4.INI file from the Modules folder. You can paste it here.

 

Pete

[Hofer]

The FSX can see them. But FSUIPC not.

 

[General]
UpdatedByVersion=4931
History=D53971EIYMCS00E51F7S9
InitDelayDevicesToo=No
NewInterceptTextMenu=No
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
DeleteVehiclesForAES=Yes
AutoScanDevices=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=Yes
OOMcheck=Yes
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
LuaRerunDelay=66
Console=No
DelayedMouseLookZoom=No
FSVersionUsed="Microsoft Flight Simulator X",10.0.61472.0
SimConnectUsed=10.0.61259.0

[JoyNames]
AutoAssignLetters=No
0=T.Flight Hotas X
0.GUID={654E4AC0-8775-11E3-8001-444553540000}

[buttons]
ButtonRepeat=20,10

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No

[GPSout2]
GPSoutEnabled=No

[WideServer]
WideFSenabled=Yes

[sounds]
Path=C:\FSX\Sound\
Device1=Primärer Soundtreiber
Device2=Lautsprecher (Realtek High Definition Audio)
Device3=Realtek Digital Output (Realtek High Definition Audio)

[Profile.All]
1=Aircreation582SL red

[Profile.test]
1=Airbus A320 germanwings D-AIPZ

[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16380,-512,512,16380
Elevator=-16380,-512,512,16380
Rudder=-16380,-512,512,16380
Throttle=-16380,16380

[Profile.l]
1=PMDG 777-230LR Lufthansa (Fictional)

[Profile.Flo]
1=Airbus A321 Lufthansa D-AISH
 

[Pete Dowson]

The FSX can see them. But FSUIPC not.

 

 

Hmm. Very strange -- FSUIPC uses the same methods, once it has identified the device. Is this the correct device?

 

0=T.Flight Hotas X

0.GUID={654E4AC0-8775-11E3-8001-444553540000}

 

Are there any buttons on the device? Are they seen in FSUIPC's button assignments tab?

 

Please edit the INI file, adding these lines to the [General] section:

 

LogAxes=Yes

Debug=Please

LogExtras=x200008

LogButtonsKeys=Yes

 

Then run FSX, go to the Axes tab and give each lever/axis one movement each in turn. And press each button once. Then close FSX and show me the FSUIPC4.LOG file.

 

Pete

[Hofer]

Hi, same problem in the Button assignment.

 

Here is the log:

 

********* FSUIPC4, Version 4.931 by Pete Dowson *********
Reading options from "C:\FSX\Modules\FSUIPC4.ini"
Running inside FSX on Windows 8
Module base=5ACA0000
User Name="Florian Herrmann"
User Addr="florian-herrmann@t-online.de"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
      125 System time = 18/04/2014 15:49:07
      125 FLT path = "C:\Users\Florian Herrmann\Documents\Flight Simulator X-Dateien\"
      156 Trying to connect to SimConnect Acc/SP2 Oct07 ...
      172 FS path = "C:\FSX\"
      469 #### Initialising Dlrectinput Axis Scanning ...
      469    Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_044F&PID_B108\Calibration\0"
      469    Found correct joystick Id 0
      469    ... and a "GUID" value
      484    DirectInput8Create failed, return = 80040154
      484    joyGetDevCaps for device 1 returned error 165 [000000A5]
      484    joyGetDevCaps for device 2 returned error 165 [000000A5]
      484    joyGetDevCaps for device 3 returned error 165 [000000A5]
      484    joyGetDevCaps for device 4 returned error 165 [000000A5]
      484    joyGetDevCaps for device 5 returned error 165 [000000A5]
      484    joyGetDevCaps for device 6 returned error 165 [000000A5]
      484    joyGetDevCaps for device 7 returned error 165 [000000A5]
      484    joyGetDevCaps for device 8 returned error 165 [000000A5]
      484    joyGetDevCaps for device 9 returned error 165 [000000A5]
      484    joyGetDevCaps for device 10 returned error 165 [000000A5]
      484    joyGetDevCaps for device 11 returned error 165 [000000A5]
      484    joyGetDevCaps for device 12 returned error 165 [000000A5]
      484    joyGetDevCaps for device 13 returned error 165 [000000A5]
      484    joyGetDevCaps for device 14 returned error 165 [000000A5]
      484    joyGetDevCaps for device 15 returned error 165 [000000A5]
      484 #### Completed Dlrectinput Axis Scanning
      500 LogOptions=50000000 02000091
      500 SIM1 Frictions access gained
      500 Wind smoothing fix is fully installed
      500 G3D.DLL fix attempt installed ok
      500 SimConnect_Open succeeded: waiting to check version okay
      500 Trying to use SimConnect Acc/SP2 Oct07
     1031 Running in "Microsoft Flight Simulator X", Version: 10.0.61472.0 (SimConnect: 10.0.61259.0)
     1031 Initialising SimConnect data requests now
     1031 FSUIPC Menu entry added
     1047 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y
     1047 C:\FSX\FLIGHTS\OTHER\FLTSIM.FLT
     1047 C:\FSX\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR
     1750 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N
     1859 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y
     2047 Memory in use: 660Mb, Avail=3436Mb
    29781 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N
    29969 Aircraft="Aircreation582SL red"
    29984 System time = 18/04/2014 15:49:36, Simulator time = 15:49:07 (22:49Z)
    30953 Starting everything now ...
    30953 AES Link established
    30953 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N
    32109 Advanced Weather Interface Enabled
    32109 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #0 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #1 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #2 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #3 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #4 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #5 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #6 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #7 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #8 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #9 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #10 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #11 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #12 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #13 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #14 is zero!
    33203 *** JOY ERROR: The LPDIRECTINPUTDEVICE8 handle for Joy #15 is zero!
    48234 ###JOY### Event seen, ID=65763 (0x000100E3), Joy=0, value=0
    48234 ###JOY### Event seen, ID=65762 (0x000100E2), Joy=1, value=0
    48234 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=-16193
    48234 ###JOY### Event seen, ID=65764 (0x000100E4), Joy=2, value=0
    48562 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=-15935
    48625 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=-12322
    48672 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=-8065
    48734 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=-2776
    48765 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=0
    48890 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=2730
    48922 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=5905
    48953 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=9588
    49031 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=12128
    49094 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=14414
    49156 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=15684
    49219 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=14795
    49281 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=12890
    49359 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=9588
    49422 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=2730
    49484 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=0
    49609 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=-711
    49625 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=-4065
    49672 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=-7162
    49734 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=-10258
    49797 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=-12580
    49812 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=-14258
    49859 ###JOY### Event seen, ID=65765 (0x000100E5), Joy=3, value=-16193
    52859 *** Entered Keys option page ***
    58187 *** Exiting Keys option page ***
    58187 *** Entered Buttons option page ***
    59750 Aircraft="Aircreation582SL red"
    60250 Aircraft="Aircreation582SL red"
    60390 Aircraft="Aircreation582SL red"
    60531 Aircraft="Aircreation582SL red"
    62312 Memory in use: 1097Mb, Avail=2998Mb

[Pete Dowson]

Hi, same problem in the Button assignment.

 

Here is the log:

 

Ah, the problem is a failure in DirectInput:

 

      469    Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_044F&PID_B108\Calibration\0"

      469    Found correct joystick Id 0

      469    ... and a "GUID" value

      484    DirectInput8Create failed, return = 80040154

 

The last time i saw this it was due to an extra unwanted DLL in the FSX foolder. Here's what the user reported:

 

"I searched for all Directinput8 files and found only one.  It was found in the main FSX folder so I deleted it. I have no idea how it got there, my guess is it was tagged in with a freeware addon I installed at some point. I deleted it out and I can now get axis assignment information, as well as Button + Switches Assignments." 

 

Please check for this -- let me know.

 

Pete

[Hofer]

I got it :D Thank youu soooo much :)

[Hofer]

Hi Pete,

 

just another question. What is the name of the axis assignment for so I can swing the view in the VC?

[aua668]

Hi,

 

Look for "AXIS PAN HEADING", "AXIS PAN PITCH" and "AXIS PAN TILT" in the FSX controls document.

 

Rgds

Reinhard

[Pete Dowson]

Look for "AXIS PAN HEADING", "AXIS PAN PITCH" and "AXIS PAN TILT" in the FSX controls document.

 

Or, for a Hat assignment, assign to "Pan View".

 

Pete

[jdriskell]

Ever since I had the misfortune to upgrade from Win 8 to Win 8.1, I have also been having problems assigning axes.  I had previously assigned the two center levers of my CH Throttle Quadrant as throttles for my PMDG 737NGX before I ungraded.  After I upgraded, I attempted to create a new profile for a C-47.  I couldn't assign any axes so I copied the 737 profile and tried to add the first two levers as prop controls and the last two levers as mixture controls.  I couldn't assign any more axes.  I did get around the problem by manually creating the axes using a text editor.  I was then able to calibrate the new axes and they seem to work fine.  Any ideas why I'm having problems with FSUIPC.  I did run FSUIPC with the edit lines in the .ini file.  The process generated a log file of over 8.5 G in size.  I've zipped the file down to 244K and can send it on if necessary.

 

Thanks in advance for any help.

[Pete Dowson]

Ever since I had the misfortune to upgrade from Win 8 to Win 8.1, I have also been having problems assigning axes.  I had previously assigned the two center levers of my CH Throttle Quadrant as throttles for my PMDG 737NGX before I ungraded.  After I upgraded, I attempted to create a new profile for a C-47.  I couldn't assign any axes so I copied the 737 profile and tried to add the first two levers as prop controls and the last two levers as mixture controls.  I couldn't assign any more axes. .

 

Please read the solution earlier in this thread.

 

Pete

[jdriskell]

I did read the solution earlier in the thread.  Before I posted my question, I searched my C:\ drive and my I:\ drive (SSD) that contains my FSX directory but didn't find any "Directinput8 files" on either drive.  Any other ideas?

 

Jim Driskell

[Hofer]

Hi,

 

I had the same Problem, take a look in your mainfolder, there is a file called D8INPUT.DLL i have delete it and then it works.

But for sure make a backup of this file.

 

Best regards

 

Hofer

[jdriskell]

I checked my C:\ and I:\FSX drive for D8INPUT.DLL.  I don't have a copy anywhere.  What do I do next to get to resolve the FSUIPC axes assignment problem.  Thanks in advance,

 

Jim Driskell

[Pete Dowson]

I checked my C:\ and I:\FSX drive for D8INPUT.DLL.  I don't have a copy anywhere.  What do I do next to get to resolve the FSUIPC axes assignment problem.  Thanks in advance,

 

Did you do the logging as suggested earlier in the thread? It would provide more information. Do that and show me the results.  I also need to see your FSUIPC4.INI.  Currently there's no information at all.  for instance, does FSX see your axes? Do either see buttons?

 

The strongest suspect at present is a corrupted Windows installation, so be prepared for the advice to reinstall it.

 

Pete

[jdriskell]

Hi Pete,

 

I decided to install the latest version of FSUIPC to see if this helped the problem.  I was running 4.9.2.9 and now I'm running 4.9.3.1.  Seems that the problem has gone away.  I'm now able to assign additional axes and calibrate them although I have to tell FSUIPC to ignore the axis when I'm scanning a particular lever.  I also wonder why my yoke, throttle quad and rudder pedals are defined twice, once by letters and then by numbers. I'm attaching my .ini for your review.

 

I've attached the log file as a zip file to reduce its size.

 

Thanks for your help.  I guess I owe you some of The Macallan. :cool:

 

Jim Driskell

 

Here's the .ini file.

 

[General]
UpdatedByVersion=4931
History=F0X94W9CYH4WGFS9KE7S5
InitDelayDevicesToo=No
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
DeleteVehiclesForAES=Yes
AutoScanDevices=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=Yes
OOMcheck=Yes
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
LuaRerunDelay=66
Console=No
UseMidMouseBtn=Yes
UseSystemTime=No
NewInterceptTextMenu=No
DelayedMouseLookZoom=No
LogAxes=Yes
Debug=Please
LogExtras=x200008
LogButtonsKeys=Yes
FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0
SimConnectUsed=10.0.61259.0

[JoyNames]
AutoAssignLetters=No
Q=CH THROTTLE QUADRANT
Q.GUID={095DF3F0-9E0A-11E2-8002-444553540000}
P=CH PRO PEDALS USB
P.GUID={095DF3F0-9E0A-11E2-8001-444553540000}
Y=CH FLIGHT SIM YOKE USB
Y.GUID={095E1B00-9E0A-11E2-8003-444553540000}
0=CH THROTTLE QUADRANT
0.GUID={095DF3F0-9E0A-11E2-8002-444553540000}
1=CH PRO PEDALS USB
1.GUID={095DF3F0-9E0A-11E2-8001-444553540000}
2=CH FLIGHT SIM YOKE USB
2.GUID={095E1B00-9E0A-11E2-8003-444553540000}

[buttons]
ButtonRepeat=20,10

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No
Port=COM0
Speed=4800
Interval=2000
PosTo6Decimal=No
SimModeIndicator=No
Sentences=

[GPSout2]
GPSoutEnabled=No
Port=<none set>
Speed=4800
Interval=2000
PosTo6Decimal=No
SimModeIndicator=No
Sentences=

[WideServer]
WideFSenabled=Yes

[sounds]
Path=I:\FSX\Sound\
Device1=Primary Sound Driver
Device2=Speakers (Realtek High Definition Audio)
Device3=Realtek Digital Output (Realtek High Definition Audio)

[Profile.PMDG 737 NGX]
1=PMDG 737-800NGX PMDG House Winglets
2=Boeing 737-890NGX Alaska Airlines Winglets

[buttons.PMDG 737 NGX]
0=PY,5,C65752,0
1=PY,4,C65570,0
2=PY,6,C65759,0
3=PY,7,C65758,0
4=PY,0,C65860,0
5=PY,8,C65861,0
6=PY,9,C65791,0
7=RY,10,C65607,0
8=RY,11,C65615,0
10=RY,2,C66278,0
11=RY,3,C66279,0
12=RY,32,C66416,0
13=RY,34,C66416,90
14=RY,33,C66416,45
15=RY,35,C66416,135
16=RY,36,C66416,180
17=RY,38,C66416,270
18=RY,39,C66416,315
19=RY,37,C66416,225
20=PY,1,K83,8

[Axes.PMDG 737 NGX]
RangeRepeatRate=10
0=QZ,256,D,9,0,0,0
1=QU,256,D,10,0,0,0
2=PX,256,D,7,0,0,0
3=PY,256,D,8,0,0,0
4=PZ,256,D,3,0,0,0
5=YX,256,D,1,0,0,0
6=YY,256,D,2,0,0,0

[JoystickCalibration.PMDG 737 NGX]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-15557,-275,262,15597
Elevator=-15521,-431,417,15550
Rudder=-15859,-131,131,15993
LeftBrake=4644,16190/16
Throttle1=-16384,-16384,-16384,16246/32
Throttle2=-16384,-16384,-16384,16246/32
RightBrake=4644,16190/16


[Profile.C-47]
1=DC3-NH1

[buttons.C-47]
0=PY,5,C65752,0
1=PY,4,C65570,0
2=PY,6,C65759,0
3=PY,7,C65758,0
4=PY,0,C65860,0
5=PY,8,C65861,0
6=PY,9,C65791,0
7=RY,10,C65607,0
8=RY,11,C65615,0
10=RY,2,C66278,0
11=RY,3,C66279,0
12=RY,32,C66416,0
13=RY,34,C66416,90
14=RY,33,C66416,45
15=RY,35,C66416,135
16=RY,36,C66416,180
17=RY,38,C66416,270
18=RY,39,C66416,315
19=RY,37,C66416,225
20=PY,1,K83,8

[Axes.C-47]
RangeRepeatRate=10
0=QX,256,D,17,0,0,0
1=QY,256,D,18,0,0,0
2=QZ,256,D,9,0,0,0
3=QR,256,D,14,0,0,0
4=QU,256,D,10,0,0,0
5=QV,256,D,13,0,0,0
6=PX,256,D,7,0,0,0
7=PY,256,D,8,0,0,0
8=PZ,256,D,3,0,0,0
9=YX,256,D,1,0,0,0
10=YY,256,D,2,0,0,0
11=YZ,256,D,29,0,0,0
12=YU,256,D,30,0,0,0

[JoystickCalibration.C-47]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-15557,-275,262,15597
Elevator=-15521,-431,417,15550
Rudder=-15859,-131,131,15993
LeftBrake=4644,16190/16
RightBrake=4644,16190/16
Throttle1=-16384,-512,512,16383/40
Throttle2=-16383,-512,512,16383/40
Mixture1=-16384,8192,8192,16383/8
Mixture2=-16384,8192,8192,16383/8
PropPitch1=-16384,0,512,16383/8
PropPitch2=-16384,0,512,16383/8
CowlFlaps1=0,16383/8
CowlFlaps2=0,16383/8
 

FSUIPC4.log.zip

[Pete Dowson]

  I'm now able to assign additional axes and calibrate them although I have to tell FSUIPC to ignore the axis when I'm scanning a particular lever.

 

That'll be because an axis is jittering -- constantly sending changes. You should find a place to park that one which is stable (usually at one or other end).

 

  I also wonder why my yoke, throttle quad and rudder pedals are defined twice, once by letters and then by numbers. I'm attaching my .ini for your review.

 

 

The whole point of using letters instead of numbers is so that changes, wrought by Windows updates or disconnecting and reconnecting devices, don't mix up your assignments. However, FSUIPC still has to use the numbers in its calls to Windows. The entries in [JoyNames] allow FSUIPC to relate the letters to the current numbers by using the names, or if there are duplicate names, the "GUIDs", which should be unique. The entries also allow me to assist diagnosis from logs when needed.

 

I've attached the log file as a zip file to reduce its size.

 

But of course I don't need it if it is all working.

 

Pete