Jump to content
The simFlight Network Forums

Rudder locked not moving

taufik jarrah
 Share

Recommended Posts

taufik jarrah Newbie

taufik jarrah

Posted
Posted

Hi Pete, suddenly no matter which aircraft i select the rudder stays in the center and I cant move it left or right can you tell me what is wrong.After I installed fsuipc must i set up every aircraft sepertly or I do one and fsuipc will regognise the rest, because I noticed when I tick profile specific analog box pops up saying do you want to save the General set up so far so iam confused and dont know what to answer.can you tell me also how can i delete an assignment which is already on the ini file. can I open the ini file and delete from there or is not the right thing to do.

 

        Regards

 

          Taufik

Link to comment
Share on other sites
Pete Dowson Rising Star

Pete Dowson

Posted
Posted

Hi Pete, suddenly no matter which aircraft i select the rudder stays in the center and I cant move it left or right can you tell me what is wrong.

 

It sounds like either it isn't assigned at all, or assigned to the wrong control, OR the rudder is broken.

 

After I installed fsuipc must i set up every aircraft sepertly or I do one and fsuipc will regognise the rest,If you want the same controls for all aircraft just assign them. In fact in that case you might as well assign them in FS. Just do it onvce. The aircraft doesn't matter.

 

You only need to assign for different aircraft if you want to use Profiles. Are you using Profiles, and if so, why?

 

because I noticed when I tick profile specific analog box pops up saying do you want to save the General set up so far so iam confused and dont know what to answer.

 

 

 

Why are you ticking profile specific? If you don't know what you are doing it is best not to go around doing such things. If you do, and you've already been making assignments or settings, it asks if you want to save those first as settings for all aircraft -- if you say no they will become specific.  You do NOT need to have everything set specifically for each aircraft. You need to think about why you are doing what you are doing!

 

can you tell me also how can i delete an assignment which is already on the ini file. can I open the ini file and delete from there or is not the right thing to do.

 

 

 

What sort of assignment? Any axis, button or keypress assignment can be deleted in the Options dialogue, easily. Why mess with the INI? You'd only need to edit the INI if you wanted to remove an aircraft from a profile -- you do that by deleting its name in the [Profile.<profile name>] section.

 

Pete

Link to comment
Share on other sites
taufik jarrah Newbie

taufik jarrah

Posted
  • Author
Posted

Hi Pete. As you advised I moved the INI file from fsx and I tried the Rudder and is moving and working nicely. so I put the original INI file back to fsx and found the rudder again hardly moving left or right, but I tried to take off and tried the rudder in the air and was moving nicely. I realy can not figure it out what is going on. By the way I unchecked the fsx control before I moved the INI file back to fsx. can you please tell me what is wrong.

 

         Regards

 

          Taufik 

Link to comment
Share on other sites
Pete Dowson Rising Star

Pete Dowson

Posted
Posted

Hi Pete. As you advised I moved the INI file from fsx and I tried the Rudder and is moving and working nicely. so I put the original INI file back to fsx and found the rudder again hardly moving left or right, but I tried to take off and tried the rudder in the air and was moving nicely.

 

It sounds like you have a steering axis assigned as well. FSUIPC gives priority to the steering axis at low speeds, crossing gradually over to rudder -- 100% rudder by 60 knots (default), and in the air. This is a documented facility.

 

If you don't think this is so, please show me your FSUIPC4.INI file.

 

Pete

Link to comment
Share on other sites
taufik jarrah Newbie

taufik jarrah

Posted
  • Author
Posted

Hi Pete, here is the INI file I hope you will find the issue, I dont know were to look wether I assigned a steering in the same time can you tell me were did you looked. while you are checking the INI file you will notice I had a lot of profile assignment. you thing I should delete them and start new set up as a

( General Assignment ) please advise. Sorry Pete I cant Attach the INI file it is telling me

( you are not permitted to upload this kind of file) can you please advise how to attach. thank you in advance.

 

        Regards

 

         Taufik

Link to comment
Share on other sites
taufik jarrah Newbie

taufik jarrah

Posted
  • Author
Posted

It sounds like you have a steering axis assigned as well. FSUIPC gives priority to the steering axis at low speeds, crossing gradually over to rudder -- 100% rudder by 60 knots (default), and in the air. This is a documented facility.

 

If you don't think this is so, please show me your FSUIPC4.INI file.

 

Pete

Hi Pete, here is the INI file I hope you will find the issue, I dont know were to look wether I assigned a steering in the same time can you tell me were did you looked. while you are checking the INI file you will notice I had a lot of profile assignment. you thing I should delete them and start new set up as a

( General Assignment ) please advise. Sorry Pete I cant Attach the INI file it is telling me

( you are not permitted to upload this kind of file) can you please advise how to attach. thank you in advance.

 

        Regards

 

         Taufik 

Link to comment
Share on other sites
Ian P Newbie

Ian P

Posted
Posted

Browser choice is irrelevant, to be quite honest.

 

The contents of the .ini file are plain text; simply open it in a text editor (e.g. Notepad), select all, copy and paste into the reply window. Some people prefer to put it in "code" tage (the button above showing "<>" but that's not necessary if you don't want to.

 

Ian P.

Link to comment
Share on other sites
taufik jarrah Newbie

taufik jarrah

Posted
  • Author
Posted

Hi Pete, here is the INI file I hope you will find the issue, I dont know were to look wether I assigned a steering in the same time can you tell me were did you looked. while you are checking the INI file you will notice I had a lot of profile assignment. you thing I should delete them and start new set up as( General Assignment ) please advise.I managed to send the INI file Thnak you very much to Ian P. for the hint.


 


 


         Regards


 

          Taufik

 

[General]

UpdatedByVersion=4934

History=6TF5A16UUEE7JKTPXOI3W

AxesWrongRange=No

TCASid=Flight

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=Yes

DontResetAxes=No

InitDelay=0

GetNearestAirports=Yes

OOMcheck=Yes

WeatherReadFactor=2

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

LuaRerunDelay=66

Console=No

LogWeather=Yes

LogWrites=Yes

LogReads=Yes

LogEvents=Yes

LogLua=Yes

DebugLua=Yes

LogAxes=Yes

LogButtonsKeys=Yes

LogExtras=Yes

InitDelayDevicesToo=No

NewInterceptTextMenu=No

UseSystemTime=No

UseMidMouseBtn=Yes

MouseWheelMove=No

MouseWheelTrim=No

MouseWheelTrimSpeed=1

JoystickTimeout=20

PollGFTQ6=Yes

BlankDisplays=No

FixControlAccel=No

FixMachSpeedBug=No

DeleteVehiclesForAES=Yes

AutoScanDevices=Yes

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=No

SuppressCloudTurbulence=No

MaxIce=-4

MinIce=-4

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=No

WindSmoothness=2

WindSmoothAirborneOnly=Yes

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=No

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=No

LoadPlanMenu=No

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=Substring

UseProfiles=Yes

EnableMouseLook=No

DelayedMouseLookZoom=No

FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0

SimConnectUsed=10.0.61259.0

 

[JoyNames]

AutoAssignLetters=No

0=Saitek Pro Flight Rudder Pedals

0.GUID={6491DB20-DAD0-11E3-8001-444553540000}

2=Saitek Pro Flight Yoke

2.GUID={6493AFE0-DAD0-11E3-8010-444553540000}

1=Saitek Pro Flight Throttle Quadrant

1.GUID={649388D0-DAD0-11E3-800F-444553540000}

 

[WideServer]

WideFSenabled=Yes

AdvertiseService=1

Port=8002

Port2=9002

 

[buttons]

ButtonRepeat=20,10

1=P2,3,C65615,0

2=P2,2,C65607,0

5=R2,21,C65966,0

6=U2,21,C65967,0

7=R2,22,C65971,0

8=U2,22,C65972,0

9=P2,14,C66513,0

11=R2,15,C65876,0

13=R2,16,C66298,0

16=R2,17,C66299,0

17=R1,6,C65976,0

18=U1,6,C65977,0

19=R1,7,C65981,0

20=U1,7,C65982,0

21=R1,0,C66375,0

22=U1,0,C0,0

23=R1,1,C65860,0

24=R1,2,C65811,0

25=R1,3,C65724,0

26=P1,4,C65842,0

27=R2,0,C65588,0

29=P2,1,C65567,0

30=P2,32,C66694,0

31=R2,34,C66416,10

32=R2,4,C65760,7

33=U2,4,C65759,7

34=R2,5,C65760,7

35=U2,5,C65758,7

36=P2,7,C1011,7

39=P2,6,C1010,7

40=P2,19,C65752,0

43=P2,18,C65580,0

 

[AutoSave]

Next=1

Interval=60

Files=10

SaveOnGround=Yes

AutoSaveEnabled=Yes

1=Sat 013339

2=Sat 020852

3=Sat 021548

4=Sat 021648

5=Sat 021946

6=Sat 022046

7=Sat 022145

8=Sat 022245

9=Sat 022344

10=Sat 022444

 

[GPSout]

GPSoutEnabled=Yes

Port=WideFS

Speed=4800

Interval=2000

PosTo6Decimal=Yes

SimModeIndicator=No

Sentences=RMC,GGA,GSA

 

[GPSout2]

GPSoutEnabled=No

Port=COM0

Speed=4800

Interval=2000

PosTo6Decimal=No

SimModeIndicator=No

Sentences=

 

[sounds]

Path=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Sound\

Device1=Primary Sound Driver

Device2=Speakers (Realtek High Definition Audio)

Device3=1 - 2752 (AMD High Definition Audio Device)

Device4=Realtek Digital Output(Optical) (Realtek High Definition Audio)

Device5=Realtek Digital Output (Realtek High Definition Audio)

 

[Profile.Throttle 1]

1=Airbus A380 v2 House

2=Boeing 747-400 Paint4

3=Airbus A321 Paint2

 

[Axes]

RangeRepeatRate=10

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0R,256,D,3,0,0,0

3=1X,256,D,11,0,0,0

4=1Y,256,D,12,0,0,0

5=1Z,256,D,23,0,0,0

6=2X,256,D,1,0,0,0

7=2Y,256,D,2,0,0,0

8=2Z,256,D,22,0,0,0

9=2U,256,D,9,0,0,0

10=2V,256,D,10,0,0,0

11=2P,0,D,35,0,0,0

 

[JoystickCalibration]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Throttle=-16380,16380

Throttle2=-16384,-16384,-16384,16383/8

Elevator=-16380,-512,512,16380/8

Aileron=-16380,-512,512,16380/8

Spoilers=-16000,16384/16

Flaps=-16383,16384/16

ElevatorTrim=-16380,-512,512,16380

Throttle3=-16384,-16384,-16384,16383/8

Throttle1=-16384,-16384,-16384,16383/8

Throttle4=-16384,-16384,-16384,16383/8

Rudder=64,64,64,64

PropPitch=-16380,16380

Mixture=-16380,16380

LeftBrake=16383,16383/16

RightBrake=16383,16383/16

Reverser1=0,0/8

Reverser2=0,0/8

Reverser3=0,0/8

Reverser4=0,0/8

PanPitch=0,0,0,0

SteeringTiller=0,0,0,0/8

 

[Axes.Throttle 1]

RangeRepeatRate=10

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0R,256,D,3,0,0,0

3=1X,1,D,11,0,0,0

4=1Z,256,D,23,0,0,0

5=2X,256,D,1,0,0,0

6=2Y,256,D,2,0,0,0

7=2Z,256,D,22,0,0,0

8=2U,256,D,9,0,0,0

9=2V,256,D,10,0,0,0

 

[buttons.Throttle 1]

0=P2,18,C65580,0

2=P2,19,C65752,0

 

[JoystickCalibration.Throttle 1]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Elevator=-16380,0,512,16380

Throttle=0,0

ElevatorTrim=0,0,0,0

Spoilers=-15744,15744/16

Flaps=-16256,16384/16

PanTilt=0,0,0,0

Reverser1=-16380,16380/8

Reverser2=-16380,16380/8

Reverser3=-16380,16380/8

Reverser4=-16380,16380/8

Throttle1=-16384,-16384,-16384,16256

Throttle2=-16384,-16384,-16384,16128

FlapStarts=-16384,1,16381

FlapEnds=-16384,1,16381

Aileron=-16380,0,512,16380

Rudder=-16380,-512,0,16380

CowlFlaps1=0,0

CowlFlaps2=0,0

CowlFlaps3=0,0

CowlFlaps4=0,0

LeftBrake=16383,16383/16

RightBrake=16383,16383/16

 

[Profile.A321]

1=Airbus A321 Paint4

2=Airbus A321 Paint5

3=Airbus A321

 

[Axes.A321]

RangeRepeatRate=10

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0R,256,D,3,0,0,0

3=1Z,256,D,23,0,0,0

4=2X,256,D,1,0,0,0

5=2Y,256,D,2,0,0,0

6=2Z,256,D,22,0,0,0

7=2U,256,D,9,0,0,0

8=2V,256,D,10,0,0,0

 

[JoystickCalibration.A321]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,0,512,16380

Elevator=-16380,-512,0,16380

Rudder=-16380,-512,512,16380

Throttle1=-16384,-16384,-16384,16383

Throttle2=-16384,-16384,-16384,16383

Throttle3=-16384,-16384,-16384,-16384

Throttle4=-16384,-16384,-16384,-16384

ElevatorTrim=0,0,0,0

Spoilers=-16384,16000/16

Flaps=-16384,16256/16

PanTilt=0,0,0,0

LeftBrake=16383,16383/16

RightBrake=16383,16383/16

 

[buttons.A321]

0=P2,18,C65580,0

1=R1,5,C65914,0

 

[Profile.B747 Default]

1=Boeing 747-400 Paint2

 

[Axes.B747 Default]

RangeRepeatRate=10

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0R,256,D,3,0,0,0

3=1X,256,D,11,0,0,0

4=1Y,256,D,12,0,0,0

5=1Z,256,D,23,0,0,0

6=2X,256,D,1,0,0,0

7=2Y,256,D,2,0,0,0

8=2Z,256,D,22,0,0,0

9=2U,256,D,9,0,0,0

10=2V,256,D,10,0,0,0

 

[JoystickCalibration.B747 Default]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,-161,-161,16380

Elevator=-16380,0,512,16380

Rudder=-16380,-129,0,16380

Throttle=0,0

PropPitch=0,0/8

Mixture=0,0/8

LeftBrake=16383,16383/8

RightBrake=16383,16383/8

Throttle1=-16384,-16384,-16384,16383/8

Throttle2=-16384,-16384,-16384,16383/8

Throttle3=-16384,-16384,-16384,16383/8

Throttle4=-16384,-16384,-16384,16383/8

ElevatorTrim=-16380,0,512,16380/8

Spoilers=15744,16380/24

Flaps=-16128,16384/16

PanTilt=0,0,0,0

FlapStarts=-16384,1,16379

 

[Profile.A380 Wilco]

1=Airbus A380 v2 Qantas

2=Airbus A380 v2 China Southern

 

[buttons.A380 Wilco]

1=P2,18,C65580,0

2=U2,18,C3,0

3=P2,17,C1007,0

 

[Axes.A380 Wilco]

RangeRepeatRate=10

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0R,256,D,3,0,0,0

3=1X,256,D,11,0,0,0

4=1Y,256,D,12,0,0,0

5=1Z,256,D,23,0,0,0

6=2X,256,D,1,0,0,0

7=2Y,256,D,2,0,0,0

8=2Z,256,D,22,0,0,0

9=2U,256,D,9,0,0,0

10=2V,256,D,10,0,0,0

 

[Profile.B777 world wide Transport]

1=Boeing 777-200LRF General Electric 90-110B1L UPS

 

[Axes.B777 world wide Transport]

RangeRepeatRate=10

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0R,256,D,3,0,0,0

3=1X,256,D,11,0,0,0

4=1Y,256,D,12,0,0,0

5=1Z,256,D,23,0,0,0

6=2X,256,D,1,0,0,0

7=2Y,256,D,2,0,0,0

8=2Z,256,D,22,0,0,0

9=2U,256,D,9,0,0,0

10=2V,256,D,10,0,0,0

 

[JoystickCalibration.B777 world wide Transport]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,0,512,16380

Elevator=-16380,0,512,16380

Rudder=-16380,-129,0,16380

Throttle=0,0

PropPitch=-16380,16380

Mixture=-16380,16380

LeftBrake=16383,16383/24

RightBrake=16383,16383/24

Throttle1=-16384,-16384,-16384,16383/8

Throttle2=-16384,-16384,-16384,16383/8

Throttle3=-16384,-16384,-16384,16383/8

Throttle4=-16384,-16384,-16384,16383/8

ElevatorTrim=-16380,-512,512,16380

Spoilers=-16000,16384/24

Flaps=-16383,16384/24

PanTilt=0,0,0,0

Reverser1=0,0/8

Reverser2=0,0/8

Reverser3=0,0/8

Reverser4=0,0/8

 

[buttons.B777 world wide Transport]

0=P2,7,C66279,0

1=P2,6,C66278,0

 

[Profile.I747-400]

1=iFly 747-400

 

[buttons.I747-400]

0=R2,2,C66416,0

 

[Axes.I747-400]

RangeRepeatRate=10

 

[Profile.A320]

1=PA320_CFM - Air France F-GJVB

 

[Axes.A320]

RangeRepeatRate=10

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0R,1,D,3,0,0,0

3=1X,256,D,11,0,0,0

4=1Y,256,D,12,0,0,0

5=1Z,256,D,23,0,0,0

6=2X,256,D,1,0,0,0

7=2Y,256,D,2,0,0,0

8=2Z,256,D,22,0,0,0

9=2U,256,D,9,0,0,0

10=2P,0,D,35,0,0,0

 

[JoystickCalibration.A320]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,-512,512,16380

Elevator=-16380,-512,512,16380

Rudder=-11997,64,64,64

Throttle=0,0

PropPitch=-16380,16380

Mixture=-16380,16380

LeftBrake=16383,16383/16

RightBrake=16383,16383/16

Throttle1=-16384,-16384,-16384,16383/8

Throttle2=-16384,-16384,-16384,16383/8

Throttle3=-16384,-16384,-16384,16383/8

Throttle4=-16384,-16384,-16384,16383/8

ElevatorTrim=-16380,-512,512,16380

Spoilers=-16000,16384/16

Flaps=-16383,16384/16

PanHeading=-1,-1,-1,-1/8

PanPitch=0,0,0,0

PanTilt=-1,-1,-1,-1/8

SteeringTiller=0,0,0,0/8

Reverser1=0,0/8

Reverser2=0,0/8

Reverser3=0,0/8

Reverser4=0,0/8

 

[Profile.A380 G-XLEA]

1=Project Airbus A380-841 British Airways VC VASFMCgauges

 

[Axes.A380 G-XLEA]

RangeRepeatRate=10

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0R,1,D,3,0,0,0

3=1X,256,D,11,0,0,0

4=1Y,256,D,12,0,0,0

5=1Z,256,D,23,0,0,0

6=2X,256,D,1,0,0,0

7=2Y,256,D,2,0,0,0

8=2Z,256,D,22,0,0,0

9=2U,256,D,9,0,0,0

10=2V,256,D,10,0,0,0

11=2P,0,D,35,0,0,0

 

[JoystickCalibration.A380 G-XLEA]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,0,512,16380/8

Elevator=-16380,0,512,16380/8

Rudder=-16380,-512,512,16380/8

Throttle=0,0

PropPitch=-16380,16380

Mixture=-16380,16380

LeftBrake=16383,16383/16

RightBrake=16383,16383/16

Throttle1=-16384,-16384,-16384,16383/8

Throttle2=-16384,-16384,-16384,16383/8

Throttle3=-16384,-16384,-16384,16383/8

Throttle4=-16384,-16384,-16384,16383/8

ElevatorTrim=-16380,-512,512,16380

Spoilers=-16000,16384/16

Flaps=-16383,16384/16

PanHeading=-1,-1,-1,-1/8

PanPitch=0,0,0,0

PanTilt=-1,-1,-1,-1/8

SteeringTiller=0,0,0,0/8

Reverser1=0,0/8

Reverser2=0,0/8

Reverser3=0,0/8

Reverser4=0,0/8

 

[Profile.A380-800 tomcatters]

1=Airbus A380-809 tomcatters

 

[Axes.A380-800 tomcatters]

RangeRepeatRate=10

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0R,256,D,3,0,0,0

3=1X,256,D,11,0,0,0

4=1Y,256,D,12,0,0,0

5=1Z,256,D,23,0,0,0

6=2X,256,D,1,0,0,0

7=2Y,256,D,2,0,0,0

8=2Z,256,D,22,0,0,0

9=2U,256,D,9,0,0,0

10=2V,256,D,10,0,0,0

11=2P,0,D,35,0,0,0

 

[JoystickCalibration.A380-800 tomcatters]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,-512,512,16380/8

Elevator=-16380,0,512,16380/8

Rudder=-16380,-512,512,16380

Throttle=0,0

PropPitch=-16380,16380

Mixture=-16380,16380

LeftBrake=16383,16383/16

RightBrake=16383,16383/16

Throttle1=-16384,-16384,-16384,16383/8

Throttle2=-16384,-16384,-16384,16383/8

Throttle3=-16384,-16384,-16384,16383/8

Throttle4=-16384,-16384,-16384,16383/8

ElevatorTrim=-16380,-512,512,16380

Spoilers=-16000,16384/16

Flaps=-16383,16384/16

PanHeading=-1,-1,-1,-1/8

PanPitch=0,0,0,0

PanTilt=-1,-1,-1,-1/8

SteeringTiller=0,0,0,0/8

Reverser1=0,0/8

Reverser2=0,0/8

Reverser3=0,0/8

Reverser4=0,0/8

 

[Profile.B737 Default]

1=Boeing 737-800 Paint5

 

[Axes.B737 Default]

RangeRepeatRate=10

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0R,256,D,3,0,0,0

3=1X,256,D,11,0,0,0

4=1Y,256,D,12,0,0,0

5=1Z,256,D,23,0,0,0

6=2X,256,D,1,0,0,0

7=2Y,256,D,2,0,0,0

8=2Z,256,D,22,0,0,0

9=2U,256,D,9,0,0,0

10=2V,256,D,10,0,0,0

11=2P,0,D,35,0,0,0

 

[JoystickCalibration.B737 Default]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,0,512,16380

Elevator=-16380,0,512,16380

Rudder=-16380,-512,512,16380

Throttle=0,0

PropPitch=-16380,16380

Mixture=-16380,16380

LeftBrake=16383,16383/16

RightBrake=16383,16383/16

Throttle1=-16384,-16384,-16384,16383/8

Throttle2=-16384,-16384,-16384,16383/8

Throttle3=-16384,-16384,-16384,16383/8

Throttle4=-16384,-16384,-16384,16383/8

ElevatorTrim=-16380,-512,512,16380

Spoilers=-16000,16384/16

Flaps=-16383,16384/16

PanHeading=-1,-1,-1,-1/8

PanPitch=0,0,0,0

PanTilt=-1,-1,-1,-1/8

SteeringTiller=0,0,0,0/8

Reverser1=0,0/8

Reverser2=0,0/8

Reverser3=0,0/8

Reverser4=0,0/8

 

[Profile.Abacus A380-700 v2]

1=Abacus Airbus A380-700 China

2=Abacus Airbus A380-700 Korean

 

[Axes.Abacus A380-700 v2]

RangeRepeatRate=10

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0R,256,D,3,0,0,0

3=1X,256,D,11,0,0,0

4=1Y,256,D,12,0,0,0

5=1Z,256,D,23,0,0,0

6=2X,256,D,1,0,0,0

7=2Y,256,D,2,0,0,0

8=2Z,256,D,22,0,0,0

9=2U,256,D,9,0,0,0

10=2V,256,D,10,0,0,0

11=2P,0,D,35,0,0,0

 

[JoystickCalibration.Abacus A380-700 v2]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,-512,512,16380/8

Elevator=-16380,-512,512,16380/8

Rudder=64,64,64,64

Throttle=-16380,16380/8

PropPitch=-16380,16380

Mixture=-16380,16380

LeftBrake=16383,16383/16

RightBrake=16383,16383/16

Throttle1=-16384,-16384,-16384,16383/8

Throttle2=-16384,-16384,-16384,16383/8

Throttle3=-16384,-16384,-16384,16383/8

Throttle4=-16384,-16384,-16384,16383/8

ElevatorTrim=-16380,-512,512,16380

Spoilers=-16000,16384/16

Flaps=-16383,16384/16

PanHeading=-1,-1,-1,-1/8

PanPitch=0,0,0,0

PanTilt=-1,-1,-1,-1/8

SteeringTiller=0,0,0,0/8

Reverser1=0,0/8

Reverser2=0,0/8

Reverser3=0,0/8

Reverser4=0,0/8

 

[Profile.Abacus A380-800 v2]

1=Abacus Airbus A380-800 China

 

[Axes.Abacus A380-800 v2]

RangeRepeatRate=10

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0R,256,D,3,0,0,0

3=1X,256,D,11,0,0,0

4=1Y,256,D,12,0,0,0

5=1Z,256,D,23,0,0,0

6=2X,256,D,1,0,0,0

7=2Y,256,D,2,0,0,0

8=2Z,256,D,22,0,0,0

9=2U,256,D,9,0,0,0

10=2V,256,D,10,0,0,0

11=2P,0,D,35,0,0,0

 

[JoystickCalibration.Abacus A380-800 v2]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,-512,512,16380

Elevator=-16380,-512,512,16380

Rudder=-16380,-512,512,16380

Throttle=-16380,16380

PropPitch=-16380,16380

Mixture=-16380,16380

LeftBrake=16383,16383/16

RightBrake=16383,16383/16

Throttle1=-16384,-16384,-16384,16383/8

Throttle2=-16384,-16384,-16384,16383/8

Throttle3=-16384,-16384,-16384,16383/8

Throttle4=-16384,-16384,-16384,16383/8

ElevatorTrim=-16380,-512,512,16380

Spoilers=-16000,16384/16

Flaps=-16383,16384/16

PanHeading=-1,-1,-1,-1/8

PanPitch=0,0,0,0

PanTilt=-1,-1,-1,-1/8

SteeringTiller=0,0,0,0/8

Reverser1=0,0/8

Reverser2=0,0/8

Reverser3=0,0/8

Reverser4=0,0/8

 

[Profile.Abacus A380-800F v2]

1=Abacus Airbus A380-800F Old House

 

[Axes.Abacus A380-800F v2]

RangeRepeatRate=10

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0R,256,D,3,0,0,0

3=1X,256,D,11,0,0,0

4=1Y,256,D,12,0,0,0

5=1Z,256,D,23,0,0,0

6=2X,256,D,1,0,0,0

7=2Y,256,D,2,0,0,0

8=2Z,256,D,22,0,0,0

9=2U,256,D,9,0,0,0

10=2V,256,D,10,0,0,0

11=2P,0,D,35,0,0,0

 

[JoystickCalibration.Abacus A380-800F v2]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=No

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Aileron=-16380,-512,512,16380

Elevator=-16380,-512,512,16380

Rudder=-16380,-512,512,16380

Throttle=-16380,16380

PropPitch=-16380,16380

Mixture=-16380,16380

LeftBrake=16383,16383/16

RightBrake=16383,16383/16

Throttle1=-16384,-16384,-16384,16383/8

Throttle2=-16384,-16384,-16384,16383/8

Throttle3=-16384,-16384,-16384,16383/8

Throttle4=-16384,-16384,-16384,16383/8

ElevatorTrim=-16380,-512,512,16380

Spoilers=-16000,16384/16

Flaps=-16383,16384/16

PanHeading=-1,-1,-1,-1/8

PanPitch=0,0,0,0

PanTilt=-1,-1,-1,-1/8

SteeringTiller=0,0,0,0/8

Reverser1=0,0/8

Reverser2=0,0/8

Reverser3=0,0/8

Reverser4=0,0/8

 

[Profile.Abacus A380-900 v2]

1=Abacus Airbus A380-900 SAS

 

[Axes.Abacus A380-900 v2]

0=0X,256,D,7,0,0,0

1=0Y,256,D,8,0,0,0

2=0R,256,D,3,0,0,0

3=1X,256,D,11,0,0,0

4=1Y,256,D,12,0,0,0

5=1Z,256,D,23,0,0,0

6=2X,256,D,1,0,0,0

7=2Y,256,D,2,0,0,0

8=2Z,256,D,22,0,0,0

9=2U,256,D,9,0,0,0

10=2V,256,D,10,0,0,0

11=2P,0,D,35,0,0,0

RangeRepeatRate=10

 

         Taufik 

Link to comment
Share on other sites
Pete Dowson Rising Star

Pete Dowson

Posted
Posted

here is the INI file I hope you will find the issue, I dont know were to look wether I assigned a steering in the same time can you tell me were did you looked. while you are checking the INI file you will notice I had a lot of profile assignment. you thing I should delete them and start new set up as( General Assignment ) please advise.I managed to send the INI file

 

Oh dear, what a mess!

 

Why are you using Profiles in any case? Do you REALLY want different axis assignments for every single aircraft? Do you really want the calibrations different for every aircraft?

 

The idea of Profiles is so you can set up things differently for different TYPES of aircraft -- jets, props, helicopters, gliders, which all need different types of axis and certainly different calibrations. Then among jets a fighter would want different (more senstive) calibration to a large transport.

 

The other reason for different Profiles is to meet the specific needs of different complex add-on aircraft, where some axis assignments don't work and where different button assignments are beeded because they do things differently.

 

I've just spent an hour sorting your INI into an order where I can show you what you are, for some odd reason, doing. Start with Profile assignments. Just for the A380 you have:

 

[Profile.A380 Wilco]
1=Airbus A380 v2 Qantas
2=Airbus A380 v2 China Southern


[Profile.A380 G-XLEA]
1=Project Airbus A380-841 British Airways VC VASFMCgauges


[Profile.A380-800 tomcatters]
1=Airbus A380-809 tomcatters


[Profile.Abacus A380-700 v2]
1=Abacus Airbus A380-700 China
2=Abacus Airbus A380-700 Korean


[Profile.Abacus A380-800 v2]
1=Abacus Airbus A380-800 China


[Profile.Abacus A380-900 v2]
1=Abacus Airbus A380-900 SAS


[Profile.Abacus A380-800F v2]
1=Abacus Airbus A380-800F Old House

Now maybe Abacus and Wilco A380's need different assignments (do they?), but even then, why create and name a different assignment for so many similar models? Do the Abacus A380-700, -800, -800F and -900 really need different axes assigned, different buttons, different calibrations? I doubr it, and looking at the sections defining these, they all look pretty much identical in any case.

 

You are simply making things very very difficult and confusing for yourself. Let's look at each section type in turn:

 

AXES

 

I compared all of the [Axes] sections and there are absolutely no differences in any of the assignments for ANY of the Profiles -- just an extra one or two in some, but none conflicting. The extras in some are Throttles 3 and 4 (which can be assigned in any case for 1 and 2 engined aircraft), and Pan/Tilt (!?).

 

You have a Profile for the iFly 747 with NO axes assigned at all (!), just one button change.

 

CALIBRATIONS

 

It looks like you've gone through pretty much the whole of the calibration tab clicking "SET" on every possible control. -- yes, INCLUDING steering tiller. Not only that you have left the actual calibration values to default in most instances -- which really defeats the entire point. Why use FSUIPC to assign and calibrate and then not bother to calibrate? You might as well not be using it at all for axes or calibrations. You should be following the numbered calibration steps in the User guide. Else just don't use FSUIPC for axes.

 

There are exceptions. These occur in most sections:

 

Rudder=64,64,64,64
Reverser1=0,0/8
Reverser2=0,0/8
Reverser3=0,0/8
Reverser4=0,0/8
PanPitch=0,0,0,0
SteeringTiller=0,0,0,0/8
 
Basically the rudder is calibrated to only ever give one fixed value, 64. The reversers, pan pitch and steering tiller are calibrated to not work at all.
 
BUTTONS
 
Mostly all your button assignments are common ad in the default [buttons] section. you only have a few differences, but almost all of the Profile-specific button assignments are actually the same as the default ones, so those are a waste in any case.
 
 
SUMMARY
 
I was going to try and fix it all up for you, but there's so much wrong there's really little point. I think your best bet is to delete it altogether and start again, but this time with more thought. Do NOT start using Profiles unless there's a reason. Do your assignments and calibrations properly, AND only for the axes you are using, not every one regardless of assignments as you appear to have done. ONLY consider profiles when you need something actually DIFFERENT for an aircraft -- like two levers you normally use for Throttles 3 and 4 on the 747 but are needed for Mixture and Prop on, say, a DC3 or Baron. Just have profiles for those aircraft that are different. As far as I can see every aircraft you currently have a Profile for can all be treated identically. You'll find differences needs with some special add-ons like the Aerosoft Airbus and all of the PMDG range.
 
Regards
Pete
Link to comment
Share on other sites
taufik jarrah Newbie

taufik jarrah

Posted
  • Author
Posted

Dear Pete, I`am very sorry for giving you a hard time, I just purchased Fsuipc two weeks ago and is new to me, so i am trying to get the best out of it. Thank you for the detailed explanation, so I will start from the scratch and see how every thing will go and I will spend more time reading your user Guide.

 

             Many Thanks

 

                Taufik

Link to comment
Share on other sites
Pete Dowson Rising Star

Pete Dowson

Posted
Posted

Dear Pete, I`am very sorry for giving you a hard time,

 

No hard time, it isn't a problem. I just think you are rushing into things a bit without thinking it through. Just start off, as I said, assigning and calibrating those things you need. Don't create profiles until you find you have to because the existing assignments don't work. And don't assign each new aircraft to a new profile, think first which one it belongs to based on the differences you need to deal with.

 

Then you'll be okay.

 

Pete

Link to comment
Share on other sites
taufik jarrah Newbie

taufik jarrah

Posted
  • Author
Posted

Hi Pete, I like to thank you for your prompt respond and the good service you do for us members.Iam flying to Dubi and then to Germany to see my uncle I will be spending about three weeks all together. when iam back I will start from the scratch doing every thing as per user guide. I hope this time I will master every thing. Thank you so much 

 

        Regards

 

          Taufik

Link to comment
Share on other sites
  • 4 months later...
taufik jarrah Newbie

taufik jarrah

Posted
  • Author
Posted

Hi Pete,

In the last three month fsx is intend to crush on exit and restart on its own again. also i noticed when i change aircraft it crush with error message saying microsoft will notify me for any solutions. Any idea how to fix this.I want you to see the error from the event viewer if that explaine any thing to you. Your feedback is so much appreciated. My fsuipc version is 4.934

 

Faulting application name: fsx.exe, version: 10.0.61637.0, time stamp: 0x46fadb14

Faulting module name: ntdll.dll, version: 6.2.9200.17046, time stamp: 0x53b485c4

Exception code: 0xc0000374

Fault offset: 0x000daa14

Faulting process ID: 0x3e4

Faulting application start time: 0x01cfe3c3c83c28f9

Faulting application path: C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe

Faulting module path: C:\Windows\SYSTEM32\ntdll.dll

Report ID: de235e47-4fb8-11e4-befc-902b345e2e63

Faulting package full name:

Faulting package-relative application ID: 

 

 Regards

  Taufik

Link to comment
Share on other sites
Pete Dowson Rising Star

Pete Dowson

Posted
Posted

Hi Pete,

In the last three month fsx is intend to crush on exit and restart on its own again. also i noticed when i change aircraft it crush with error message saying microsoft will notify me for any solutions. Any idea how to fix this.I want you to see the error from the event viewer if that explaine any thing to you. Your feedback is so much appreciated. My fsuipc version is 4.934

 

The earliest supported version of FSUIPC is 4.937.

 

Your crash is in NTDLL which could be due to any sort of corruption. Mostly in the past I have found them due to either corrupt scenery files or corrupt aircraft gauges or bits maps. It isn't FSUIPC. I can only suggest you try a process of elimination until you find the issue.

 

Pete

Link to comment
Share on other sites
taufik jarrah Newbie

taufik jarrah

Posted
  • Author
Posted

Hi Pete,

first can I update to the new version you mensioned which is 4.937 and if yes were can I got it from, and if i updated it will keep all my settings in the ini file or i have to start from the scratch.By the way I installed the FSC Commander and after that fsx began to crush.

I thing that software will update maps and sceneries. You thing is that the problem of crushing. I noticed when I exit FSX is giving me the error message and following that is restarting on its own, practically i can not shut it down. I have attached the last crush for you may be it will tell you some thing.

     

      Regards

       Taufik

 

Faulting application name: fsx.exe, version: 10.0.61637.0, time stamp: 0x46fadb14

Faulting module name: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d2be6
Exception code: 0xc0000002
Fault offset: 0x00010f22
Faulting process ID: 0xb58
Faulting application start time: 0x01cfe8e8691b0190
Faulting application path: C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe
Faulting module path: C:\Windows\SYSTEM32\KERNELBASE.dll
Report ID: 316560dc-54e6-11e4-bf08-902b345e2e63
Faulting package full name: 
Faulting package-relative application ID: 
Link to comment
Share on other sites
Pete Dowson Rising Star

Pete Dowson

Posted
Posted

Now the crash is in the Windows Kernel Base! Certainly FSUIPC cannot have anything to do with that. I think you might have a bad driver there, somewhere.

 

Sorry I cannot help. Why not try the crash forum over on AVSIM? I think you need to go through a thorough process of elimination till you find the problem.

 

Pete

Link to comment
Share on other sites
taufik jarrah Newbie

taufik jarrah

Posted
  • Author
Posted

Hi Pete,


 


1.) can I update to the new version you mensioned which is 4.937 and if yes were can I got it from, and if i updated it will keep all my  


     settings in the ini file or i have to start from the scratch. My present version is 4.934 and wide server also 4.934.Is any new update      for my version.


2.) I tried to delete fsx cfg. file and generated a new one and added to [Graphics]  Highmemfix=1 but fsx still crushing.


Link to comment
Share on other sites
Pete Dowson Rising Star

Pete Dowson

Posted
Posted

1.) can I update to the new version you mensioned which is 4.937 and if yes were can I got it from, and if i updated it will keep all my  

     settings in the ini file or i have to start from the scratch. My present version is 4.934 and wide server also 4.934.Is any new update      for my version.

 

Of course you can update. In fact you MUST if you want support -- I can't support old versions! You can get the latest version from the Download Modules subforum here, or over in the usual www.schiratti.com/dowson place. The places you can get FSUIPC from have not changed for many many years!

 

Installation of updates changes no settings whatsoever.

 

2.) I tried to delete fsx cfg. file and generated a new one and added to [Graphics]  Highmemfix=1 but fsx still crushing.

 

 

From the crashes you are getting I doubt whether it is FSX itslef, more likely add-on scenery, or even more likely some Windows driver.

 

Pete

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.