Jump to content
The simFlight Network Forums

getting FSUIPC4 To run


Recommended Posts

Pete Can you please help!

I purchased and registered copies of FSUIPC4 and WideFS 7 and installed them I have attached the log files.

The problem is it will not give me a position on OZ wunways. I have Oz runways on a Ipad 2 with built in GPS I disable location on Oz runways and put into simulator mode and start to fly but nothing happons.

I am also running MSFS-x on my Toshiba satellite laptop with windows 10 on a wireless network 

 

I can not see any problems with the logs below except this error comes up 

 143547 *** LUA Error: ...(x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSXOzplug.lua:39: malformed number near '192.168.0.3'

   143547 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSXOzplug.lua"

It also seams to be looking for ESP and Prepar3D and Initial.LUA and not finding them. What am I missing.

 

Regards Darryl Robertson 

 

Installer for FSUIPC4.DLL version 4.937

 

Looking in registry for FSX install path:

     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0

     Parameter"SetupPath"

... >>>  OK! FOUND FSX!  <<< ...

Looking in registry for ESP install path:

     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft ESP\1.0

     Parameter"SetupPath"

Not there, so looking in:

     HKEY_CURRENT_USER\ESP

     Parameter"AppPath"

... NOT found! ...

Looking in registry for Prepar3D install path:

     HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D

     Parameter"SetupPath"

Not there, so looking in:

     HKEY_CURRENT_USER\Prepar3D

     Parameter"AppPath"

... NOT found! ...

Looking in registry for Prepar3D v2 install path:

     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2

     Parameter"SetupPath"

Not there, so looking in:

     HKEY_CURRENT_USER\Prepar3D v2

     Parameter"AppPath"

... NOT found! ...

===========================================================

 

INSTALLATION FOR FSX:

SetupPath="C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\"

Checking version of the FSX EXE:

... Version 10.0.60905.0  (Need at least 10.0.60905.0)

Checking compatibility with installed SimConnect:

    Found SimConnect build 60905 (Original)

Checking if there's already a version of FSUIPC4 installed in:

       C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL

... Version 4.937 found.

FSX Modules folder already exists.

Okay -- installed FSUIPC4 into "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL"

Looking for the current user's Application Data path: 

... found as "C:\Users\Darryl Robertson\AppData\Roaming"

Now finding \Microsoft\FSX\FSX.CFG for all users, including this one

Looking in "C:\Users\Administrator\AppData\Roaming"

 ... No FSX.CFG there

Looking in "C:\Users\All Users\AppData\Roaming"

 ... No FSX.CFG there

Looking in "C:\Users\Darryl Robertson\AppData\Roaming"

Found FSX.CFG in "C:\Users\Darryl Robertson\AppData\Roaming\Microsoft\FSX\FSX.CFG"

Now checking DLL.XML ...

... There is a previous DLL.XML, checking for FSUIPC4 section.

... FSUIPC4_Loader section already exists but will be replaced.

     (with FSUIPC4_Loader entry)

... FSUIPC4 section of DLL.XML written okay

Now checking for a SimConnect.XML file ...

... No SimConnect.XML file found. This is okay.

Looking in "C:\Users\Default\AppData\Roaming"

 ... No FSX.CFG there

Looking in "C:\Users\Default User\AppData\Roaming"

 ... No FSX.CFG there

Looking in "C:\Users\Default.migrated\AppData\Roaming"

 ... No FSX.CFG there

Looking in "C:\Users\DefaultAppPool\AppData\Roaming"

 ... No FSX.CFG there

Looking in "C:\Users\Public\AppData\Roaming"

 ... No FSX.CFG there

"Modules\FSUIPC Documents" folder already exists.

Now installing additional files into the "Modules\FSUIPC Documents" folder:

   Installed "FSUIPC4 User Guide.pdf" okay

   Installed "FSUIPC4 for Advanced Users.pdf" okay

   Installed "FSUIPC4 History.pdf" okay

   Installed "List of FSX and P3D controls.pdf" okay

   Installed "FSUIPC Lua Library.pdf" okay

   Installed "FSUIPC Lua Plug-Ins.pdf" okay

   Installed "Lua License.pdf" okay

   Installed "Lua Plugins for VRInsight Devices.pdf" okay

   Installed "LuaFileSystem.pdf" okay

   Installed "Example LUA plugins.zip" okay

   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay

   Installed "Offset Mapping for PMDG 737NGX.pdf" okay

   Installed "FSUIPC4 Offsets Status.pdf" okay

   Installed "Profiles in Separate Files.pdf" okay

===========================================================

 

All installer tasks completed.

Registration for FSUIPC4 was successful! (result code 00)

 

*************** End of Install Log ***************

-------------------------------------------------------------------------------------------------------------------

********* FSUIPC4, Version 4.937 by Pete Dowson *********

Reading options from "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.ini"

Running inside FSX on Windows 8

Module base=779E0000

User Name="Darryl Robertson"

User Addr="robertson.darryl@gmail.com"

FSUIPC4 Key is provided

WideFS7 Key is provided

     1032 System time = 22/01/2016 12:58:24

     1079 FLT UNC path = "\\DARRYLROBERTSON\Users\Darryl Robertson\Documents\Flight Simulator X Files\"

     1188 Trying to connect to SimConnect Original ...

     1235 FS UNC path = "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\"

     2032 LogOptions=80000000 00000011

     2032 SIM1 Frictions access gained

     2047 WARNING: Failed to install Mouse Macro hooks!

     2047 Wind smoothing fix is fully installed

     2047 Delaying SimConnect connection ...

     2438 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N

     3579 Memory in use: 534Mb, Avail=1514Mb

    32047 SimConnect_Open succeeded: waiting to check version okay

    32047 Trying to use SimConnect Original

    32047 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

    32047 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y

    63985 Memory in use: 616Mb, Avail=1432Mb

   128860 Memory in use: 751Mb, Avail=1297Mb

   138391 SimStart Event: Initialising SimConnect data requests

   138391 FSUIPC Menu entry added

   138579 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N

   138657 \\DARRYLROBERTSON\Users\Darryl Robertson\AppData\Roaming\Microsoft\FSX\Previous flight.FLT

   138672 C:\Users\Darryl Robertson\Documents\Flight Simulator X Files\IFR Townsville Intl to Innisfail.PLN

   138672 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Beech_King_Air_350\Beech_King_Air_350.AIR

   138672 C:\Users\Darryl Robertson\Documents\Flight Simulator X Files\IFR Townsville Intl to Innisfail.PLN

   138735 System time = 22/01/2016 13:00:42, Simulator time = 05:58:22 (20:58Z)

   138735 Aircraft="Beech King Air 350 Paint1"

   143516 Starting everything now ...

   143547 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N

   143547 LUA.0: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSXOzplug.lua"

   143547 *** LUA Error: ...(x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSXOzplug.lua:39: malformed number near '192.168.0.3'

   143547 LUA.0: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSXOzplug.lua"

   149860 Advanced Weather Interface Enabled

   188985 Memory in use: 849Mb, Avail=1199Mb

   249313 Memory in use: 849Mb, Avail=1199Mb

   309547 Memory in use: 849Mb, Avail=1199Mb

   369829 Memory in use: 847Mb, Avail=1201Mb

   430125 Memory in use: 840Mb, Avail=1208Mb

   490407 Memory in use: 855Mb, Avail=1193Mb

   550594 Memory in use: 855Mb, Avail=1193Mb

   610891 Memory in use: 862Mb, Avail=1186Mb

   671204 Memory in use: 865Mb, Avail=1183Mb

   731391 Memory in use: 891Mb, Avail=1157Mb

   791516 Memory in use: 899Mb, Avail=1149Mb

   851688 Memory in use: 899Mb, Avail=1149Mb

   911954 Memory in use: 892Mb, Avail=1156Mb

   972157 Memory in use: 892Mb, Avail=1156Mb

  1032469 Memory in use: 892Mb, Avail=1156Mb

  1092688 Memory in use: 892Mb, Avail=1156Mb

  1111735 **** No SimConnect events or states being received! Re-connecting now ... ****

  1111844 SimConnect_Open succeeded: waiting to check version okay

  1111938 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

  1111938 Initialising SimConnect data requests now

  1111969 FSUIPC Menu entry added

  1112391 \\DARRYLROBERTSON\Users\Darryl Robertson\Documents\Flight Simulator X Files\AutoSave Fri 131625.FLT

  1112407 C:\Users\Darryl Robertson\Documents\Flight Simulator X Files\IFR Townsville Intl to Innisfail.PLN

  1112907 C:\Users\Darryl Robertson\Documents\Flight Simulator X Files\IFR Townsville Intl to Innisfail.PLN

  1113500 System time = 22/01/2016 13:16:57, Simulator time = 06:14:16 (21:14Z)

  1144469 **** No SimConnect events or states being received! Re-connecting now ... ****

  1144579 SimConnect_Open succeeded: waiting to check version okay

  1144860 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

  1144860 Initialising SimConnect data requests now

  1144875 FSUIPC Menu entry added

  1145344 C:\Users\Darryl Robertson\Documents\Flight Simulator X Files\IFR Townsville Intl to Innisfail.PLN

  1146157 C:\Users\Darryl Robertson\Documents\Flight Simulator X Files\IFR Townsville Intl to Innisfail.PLN

  1147422 System time = 22/01/2016 13:17:31, Simulator time = 06:14:16 (21:14Z)

  1154516 Memory in use: 899Mb, Avail=1149Mb

  1214688 Memory in use: 897Mb, Avail=1151Mb

  1274891 Memory in use: 898Mb, Avail=1150Mb

  1335000 Memory in use: 898Mb, Avail=1150Mb

  1395266 Memory in use: 898Mb, Avail=1150Mb

  1455500 Memory in use: 898Mb, Avail=1150Mb

  1515860 Memory in use: 904Mb, Avail=1144Mb

  1576079 Memory in use: 904Mb, Avail=1144Mb

  1636266 Memory in use: 904Mb, Avail=1144Mb

  1696438 Memory in use: 904Mb, Avail=1144Mb

  1756657 Memory in use: 904Mb, Avail=1144Mb

  1816954 Memory in use: 903Mb, Avail=1145Mb

  1877235 Memory in use: 903Mb, Avail=1145Mb

  1937532 Memory in use: 903Mb, Avail=1145Mb

  1998032 Memory in use: 904Mb, Avail=1144Mb

  2058391 Memory in use: 902Mb, Avail=1146Mb

  2118782 Memory in use: 902Mb, Avail=1146Mb

  2179047 Memory in use: 902Mb, Avail=1146Mb

  2239454 Memory in use: 902Mb, Avail=1146Mb

  2299860 Memory in use: 902Mb, Avail=1146Mb

  2360250 Memory in use: 902Mb, Avail=1146Mb

  2387641 **** No SimConnect events or states being received! Re-connecting now ... ****

  2387750 SimConnect_Open succeeded: waiting to check version okay

  2387907 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

  2387907 Initialising SimConnect data requests now

  2387938 FSUIPC Menu entry added

  2388141 \\DARRYLROBERTSON\Users\Darryl Robertson\Documents\Flight Simulator X Files\AutoSave Fri 132723.FLT

  2388141 C:\Users\Darryl Robertson\Documents\Flight Simulator X Files\IFR Townsville Intl to Innisfail.PLN

  2389500 C:\Users\Darryl Robertson\Documents\Flight Simulator X Files\IFR Townsville Intl to Innisfail.PLN

  2389954 System time = 22/01/2016 13:38:13, Simulator time = 06:24:09 (21:24Z)

  2875672 Memory in use: 944Mb, Avail=1104Mb

  2935922 Memory in use: 832Mb, Avail=1216Mb

  2996063 Memory in use: 832Mb, Avail=1216Mb

  3056282 Memory in use: 832Mb, Avail=1216Mb

  3116563 Memory in use: 832Mb, Avail=1216Mb

  3176750 Memory in use: 832Mb, Avail=1216Mb

  3236907 Memory in use: 832Mb, Avail=1216Mb

  3297094 Memory in use: 832Mb, Avail=1216Mb

  3357313 Memory in use: 832Mb, Avail=1216Mb

  3417438 Memory in use: 832Mb, Avail=1216Mb

  3477594 Memory in use: 832Mb, Avail=1216Mb

  3537829 Memory in use: 832Mb, Avail=1216Mb

  3598094 Memory in use: 832Mb, Avail=1216Mb

  3658797 Memory in use: 832Mb, Avail=1216Mb

  3718969 Memory in use: 832Mb, Avail=1216Mb

  3779219 Memory in use: 832Mb, Avail=1216Mb

  3839469 Memory in use: 832Mb, Avail=1216Mb

  3899704 Memory in use: 832Mb, Avail=1216Mb

  3959969 Memory in use: 832Mb, Avail=1216Mb

  4020110 Memory in use: 832Mb, Avail=1216Mb

  4080313 Memory in use: 832Mb, Avail=1216Mb

  4140547 Memory in use: 832Mb, Avail=1216Mb

  9475688 Memory in use: 832Mb, Avail=1216Mb

  9475719 **** No SimConnect events or states being received! Re-connecting now ... ****

  9476532 SimConnect_Open succeeded: waiting to check version okay

  9477235 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

  9477266 Initialising SimConnect data requests now

  9477266 FSUIPC Menu entry added

  9477500 C:\Users\Darryl Robertson\Documents\Flight Simulator X Files\IFR Townsville Intl to Innisfail.PLN

  9477704 C:\Users\Darryl Robertson\Documents\Flight Simulator X Files\IFR Townsville Intl to Innisfail.PLN

  9477782 System time = 22/01/2016 15:36:21, Simulator time = 06:24:09 (21:24Z)

  9503079 **** No SimConnect events or states being received! Re-connecting now ... ****

  9503188 SimConnect_Open succeeded: waiting to check version okay

  9503375 Running in "Microsoft Flight Simulator X", Version: 10.0.60905.0 (SimConnect: 2.0.60905.0)

  9503375 Initialising SimConnect data requests now

  9503375 FSUIPC Menu entry added

  9503641 C:\Users\Darryl Robertson\Documents\Flight Simulator X Files\IFR Townsville Intl to Innisfail.PLN

  9503922 C:\Users\Darryl Robertson\Documents\Flight Simulator X Files\IFR Townsville Intl to Innisfail.PLN

  9507813 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y

----------------------------------------------------------------------------------------------------------------

[General]

UpdatedByVersion=4937

History=Z6N66592VHG69V8G74YJF

AxesWrongRange=No

TCASid=Flight

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=No

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

DontResetAxes=No

InitDelay=30

GetNearestAirports=No

OOMcheck=Yes

WeatherReadFactor=2

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

LuaRerunDelay=66

Console=Yes

InitDelayDevicesToo=No

NewInterceptTextMenu=No

UseSystemTime=No

UseMidMouseBtn=Yes

MouseWheelMove=No

MouseWheelTrim=No

MouseWheelTrimSpeed=1

JoystickTimeout=20

PollGFTQ6=Yes

BlankDisplays=No

FixControlAccel=No

FixMachSpeedBug=No

DeleteVehiclesForAES=No

AutoScanDevices=Yes

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=No

SuppressCloudTurbulence=No

MaxIce=3

MinIce=-1

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=No

WindSmoothness=2

WindSmoothAirborneOnly=Yes

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=No

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=No

LoadPlanMenu=No

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=Substring

UseProfiles=Yes

EnableMouseLook=No

DelayedMouseLookZoom=No

ConsoleWindow=-9,2,1031,737

LogLua=Yes

DebugLua=Yes

LogExtras=Yes

FSVersionUsed="Microsoft Flight Simulator X",10.0.60905.0

SimConnectUsed=2.0.60905.0

 

[JoyNames]

AutoAssignLetters=No

0=Logitech Extreme 3D

0.GUID={76B81840-C0A5-11E3-8001-444553540000}

 

[WideServer]

WideFSenabled=Yes

AdvertiseService=1

Port=8002

Port2=9002

 

[Auto]

1=Lua FSXOzplug

 

[Axes]

PollInterval=10

RangeRepeatRate=10

 

[buttons]

PollInterval=25

ButtonRepeat=20,10

 

[AutoSave]

Next=8

Interval=60

Files=10

SaveOnGround=No

AutoSaveEnabled=Yes

1=Fri 132126

2=Fri 132226

3=Fri 132325

4=Fri 132425

5=Fri 132524

6=Fri 132624

7=Fri 132723

8=Fri 131828

9=Fri 131927

10=Fri 132027

 

[GPSout]

GPSoutEnabled=Yes

Port=192.168.0.8

Speed=4800

Interval=2000

PosTo6Decimal=Yes

SimModeIndicator=No

Sentences=RMC,GGA,GSA

 

[GPSout2]

GPSoutEnabled=No

Port=

Speed=4800

Interval=2000

PosTo6Decimal=No

SimModeIndicator=No

Sentences=RMC,GGA,GSA

 

[sounds]

Path=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Sound\

Device1=Primary Sound Driver

Device2=Speakers (Realtek High Definition Audio)

 

[Auto]

1=Lua FSXOzplug

 

[LuaFiles]

1=FSXOzplug

-------------------------------------------------------------------------------------------------------------------

********* WideServer.DLL Log [version 7.937] *********

Blocksize guide = 8192 (double allowed)

Date (dmy): 21/01/16, Time 14:33:06.786: Server name is DARRYLROBERTSON

    15156 Initialising TCP/IP server

    15156 Initialising UDP/IP server

    16031 Broadcasting service every 1000 mSecs

 67809203 Closing down now ...

Memory managed:  Offset records: 21 alloc, 20 free

Read buffer usage:  0 alloc, 0 free, max in session: 0

Write buffer usage: 0 alloc, 0 free, max in session: 0

Throughput maximum achieved:  0 frames/sec, 0 bytes/sec

Throughput average achieved for complete session:  0 frames/sec, 0 bytes/sec

********* Log file closed *********

----------------------------------------------------------------------------------------------------------------------

********* WideServer.DLL Log [version 7.937] *********

Blocksize guide = 8192 (double allowed)

Date (dmy): 22/01/16, Time 13:00:47.415: Server name is DARRYLROBERTSON

    15141 Initialising TCP/IP server

    15141 Initialising UDP/IP server

    16078 Broadcasting service every 1000 mSecs

----------------------------------------------------------------------------------------------------------------------

********* WideClient Log [version 6.999n] Class=FS98MAIN *********

Date (dmy): 16/01/16, Time 10:24:54.347: Client name is DARRYLROBERTSON

      531 LUA: "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\Initial.LUA": not found

      562 Attempting to connect now

      562 Trying to locate server: Need details from Server Broadcast

      562 Failed to connect: waiting to try again

     2609 Attempting to connect now

 

    11312 ****** End of session performance summary ******

    11312 Total time connected = 0 seconds

    11312 Reception maximum:  0 frames/sec, 0 bytes/sec

    11328 Transmission maximum:  0 frames/sec, 0 bytes/sec

    11328 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0

 

    11328 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) *********

-----------------------------------------------------------------------------------------------------------------------

********* WideClient Log [version 6.999n] Class=FS98MAIN *********

Date (dmy): 02/01/16, Time 18:23:47.001: Client name is DARRYLROBERTSON

      531 LUA: "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\Initial.LUA": not found

      578 Attempting to connect now

      578 Trying to locate server: Need details from Server Broadcast

      578 Failed to connect: waiting to try again

     2625 Attempting to connect now

    45313 Trying to locate server: Need details from Server Broadcast

 

  2581906 ****** End of session performance summary ******

  2581922 Total time connected = 0 seconds

  2581922 Reception maximum:  0 frames/sec, 0 bytes/sec

  2581922 Transmission maximum:  0 frames/sec, 0 bytes/sec

  2581922 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0

 

  2581922 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) *********

Link to comment
Share on other sites

You've posted in a sub-forum for .NET programming. In future please post general FSUIPC support questions to main forum.

 

Pete will probably see it here when he gets back and move it. Or maybe a moderator could move it in the mean time if one happens to pass by...

 

 

Paul

Link to comment
Share on other sites

  • 3 weeks later...
Installer for FSUIPC4.DLL version 4.937

 

FSUIPC version 4.937 is no longer supported. Please update to 4.949.

 

 

I can not see any problems with the logs below except this error comes up 

 143547 *** LUA Error: ...(x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSXOzplug.lua:39: malformed number near '192.168.0.3'

 

That error stops your "FSXOzplug" working. You'd need to correct it.

 

It also seams to be looking for ESP and Prepar3D and Initial.LUA and not finding them. What am I missing.

 

The installer for FSUIPC installs for all versions of FS (though ESP support is now removed and P3Dv3 support added) Why does that worry you?

 

As described in the WideFS documentation, WideClient (not FSUIPC) executes an "Initial.LUA" if it finds it. It logs it either way so you know. Why do you think you are missing anything? Logs are for information, not just error reports.

 

Pete

Link to comment
Share on other sites

Hi Pete

Ok I have down loaded and installed FSUIPC version  4.949.  By way of fault finding I am interested to know if FSUIPC and Wide client have installed correctly if all the elements of your software have installed correctly then I will look else where. I am a newcomer to Flight simulator and I am not a programmer I am a professional pilot so I am trying to pick my way through this.

 

regards

Darryl   

Link to comment
Share on other sites

Ok I have down loaded and installed FSUIPC version  4.949.  By way of fault finding I am interested to know if FSUIPC and Wide client have installed correctly if all the elements of your software have installed correctly then I will look else where. I am a newcomer to Flight simulator and I am not a programmer I am a professional pilot so I am trying to pick my way through this.

 

Oh dear. :-(

 

The ONLY problem you appear to have, according to your posts here, is with a Lua plug-in you are trying to use called "FSXOzplug.lua". That is not part of my product at all, and if you didn't write it then you must have obtained it somewhere. If you need help with that then you will probably need to go back to its source.

 

The plug-in is a text program which can be read and edited like any text program. You'll find it in the FS Modules folder, next to FSUIPC and its logs. It appears to contain a blatant syntax error. If you paste it into a message here I might be able to identify it and tell you how to fix it, but as it is not my program I cannot guarantee that.

 

Pete

Link to comment
Share on other sites

Hi Pete

Thanks for your reply I understand it is not you product, so any help that you are able to give will be a step forward.I have attached the text from the two files FSXOzplug.lua and FSXOzplug.log I was not sure if the two programms were interfacing.

 

Regards

Darryl 

 

 

********* LUA: "FSXOzplug" Log [from FSUIPC version 4.949] *********

    94234 System time = 09/02/2016 16:41:53, Simulator time = 09:40:17 (00:40Z)

    94234 LUA: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSXOzplug.lua"

    94250 *** LUA Error: ...(x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSXOzplug.lua:39: malformed number near '192.168.0.3'

    94250 LUA: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSXOzplug.lua"

    94250 System time = 09/02/2016 16:41:53, Simulator time = 09:40:17 (00:40Z)

********* LUA execution terminated: Log Closed *********

 

********* LUA: "FSXOzplug" Log [from FSUIPC version 4.949] *********

   101093 System time = 09/02/2016 19:58:13, Simulator time = 12:56:33 (03:56Z)

   101093 LUA: beginning "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSXOzplug.lua"

   101093 *** LUA Error: ...(x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSXOzplug.lua:169: '=' expected near '1'

   101093 LUA: ended "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSXOzplug.lua"

   101093 System time = 09/02/2016 19:58:13, Simulator time = 12:56:33 (03:56Z)

********* LUA execution terminated: Log Closed *********

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


----------------------------------------------------------------------------

-- FSX Pulg-in for OzRunways "FSXOzplug.lua"

-- Author: Jason Beringer jason.beringer@monash.edu

-- 20/6/2012  Version 1.1

-- FSUIPC  (http://www.schiratti.com/dowson.html) Lua Plug-In

-- OzRunways EFB App for iPhone and Ipad (http://www.ozrunways.com/site/)

--(For FSUIPC4/ESPIPC version 4.60 and later, or FSUIPC3 version 3.98 and later)

-- Place in Modules folder

-- Code reads FSUIPC offsets and writes to UDP port 49002 in format of Xplane data packets

-- this makes OzRunways think it is connected to XPlane but really its FSX

--

--INSTALLATION

-- Download and install FSUIPC (http://www.schiratti.com/dowson.html) - version 4.60 and later, or FSUIPC3 version 3.98 and later

-- To install extract this file (FSX_OzRunways_plugin.lua) into directory ..... /Microsoft Games/Microsoft Flight Simulator X/Modules/

-- Requires vstruct in ..... /Microsoft Games/Microsoft Flight Simulator X/Modules/vstruct

-- Enter the IPad / IPhone IP address into the "host" below in the code

-- Edit the "FSUIPC.ini".  Add the following lines to the end (no dashes)

--[Auto]

--1=Lua FSXOzplug

 

--

--History

-- v1.0 First release June 2012

-- v1.1 Added current weather (wind speed and direction) as data output.  Added a few print statements to tack in FSUIPC log. Added comments

 

-----------------------------------------------------------------------------

 

--Required LUA Modules

local socket = require("socket")

local vstruct = require ("vstruct")

 

-- Define update rate here in mS

local update_rate=100 --0.1 seconds

 

print ("Loading FSXOzPlug")

-- Define IP and port

-- Enter the IP address of the IPad or Iphone that OzRunways is running on. 

-- Port 49002 is UDP port that XPlane communicates on and OzRunways expects

host = host or "192.168.0.3"  -- USER EDIT THIS FOR YOUR IPDA/IPHONE RUNNING OZRUNWAYS

port = port or 49002

 

-- Set options for UDP socket

print ("Setting up socket")

udp2 = socket.udp()

udp2:settimeout(0)

udp2:setoption('broadcast',true)

udp2:setoption('dontroute',true)

 

--Loop forever

print ("FSXOzplug running .....")

while 1 do

 

-- These are the variables OzRunways cares about

--For code 20  - lat,lon,altitude - index 0 = lat, 1=lon, 2=alt (units - lat/lon degrees, altitude is in feet)

--For code 21 - vx,vz (if that makes sense)-  index 3=vx  index 5=vz (units kts)

--For code 18 - heading (maybe more correctly, track, direction aircraft is pointing) - index 2=track (units degrees)

 

--Get data from FSUIPC

local gs_FSUIPC_raw, tas_FSUIPC_raw, ias_FSUIPC_raw,

lat_FSUIPC_raw, lon_FSUIPC_raw, alt_FSUIPC_raw, pitch_FSUIPC_raw, bank_FSUIPC_raw, hdgT_FSUIPC_raw,

mach_FSUIPC_raw,vs_FSUIPC_raw, Vz_ft_s_FSUIPC_raw, Vx_ft_s_FSUIPC_raw, Vy_ft_s_FSUIPC_raw, 

Mag_var_FSUIPC_raw, ambt_WS_knt_FSUIPC_raw,ambt_WD_T_FSUIPC_raw  = ipc.readStruct( 0x02B4, "3UD",

0x0560, "3DD", "2SD", "1UD",

0x11C6, "1UW",

0x0842, "1SW",

0x3190, "3DBL",

0x02A0, "1UW",

0x0E90, "2UW")

 

-- and convert it from FS units to units we like

local gs_FSUIPC = (gs_FSUIPC_raw * 3600) / (65536 * 1852)

local tas_FSUIPC = tas_FSUIPC_raw / 128

local ias_FSUIPC = ias_FSUIPC_raw / 128

local mach_FSUIPC = mach_FSUIPC_raw / 20480

local vs_FSUIPC = vs_FSUIPC_raw * -3.28084

local lat_FSUIPC = lat_FSUIPC_raw * 90 / (10001750 * 65536 * 65536)

local lon_FSUIPC = lon_FSUIPC_raw * 360 /  (65536 * 65536 * 65536 * 65536)

local alt_ft_FSUIPC = alt_FSUIPC_raw * 3.28084 / (65536 * 65536)

local alt_m_FSUIPC = alt_FSUIPC_raw / (65536 * 65536)

local pitch_FSUIPC = pitch_FSUIPC_raw * 360 / (65536 * 65536)

local bank_FSUIPC = bank_FSUIPC_raw * 360 / (65536 * 65536)

local hdgT_FSUIPC = hdgT_FSUIPC_raw * 360 / (65536 * 65536)

local Mag_var_FSUIPC = Mag_var_FSUIPC_raw * 360 / 65536

local hdgM_FSUIPC = hdgT_FSUIPC - Mag_var_FSUIPC

local Vz_m_s_FSUIPC=Vz_ft_s_FSUIPC_raw/3.28084

local Vx_m_s_FSUIPC=Vx_ft_s_FSUIPC_raw/3.28084

local Vy_m_s_FSUIPC=Vy_ft_s_FSUIPC_raw/3.28084

local ambt_WD_T_FSUIPC = ambt_WD_T_FSUIPC_raw * 360 / 65536

local ambt_WS_knt_FSUIPC = ambt_WS_knt_FSUIPC_raw 

 

-- Now produce the datagram for Xplane UDP packet

-- First part the "DATA" phrase

local data1=68

local data2=65

local data3=84

local data4=65

local data5=64

 

-- Then index 17 for xpplane pitch, roll, hdg

-- Note in Xplane ten this is 17 but we output 18 because that is what OzRunways expects

local index1=18

local index1a=0

local index1b=0

local index1c=0

 

local pitch=pitch_FSUIPC

local roll=bank_FSUIPC

local hdg_true=hdgT_FSUIPC

local hdg_mag=hdgM_FSUIPC

local blank1=ambt_WD_T_FSUIPC -- This was previously blank for Xplane but I have added weather info here

local blank2=ambt_WS_knt_FSUIPC -- This was previously blank for Xplane but I have added weather info here

local blank3=-999

local blank4=-999

 

-- Then index 20 for x-plane lat,lon,alt,etc.

local index2=20

local index2a=0

local index2b=0

local index2c=0

local lat_D=lat_FSUIPC

local lon_D=lon_FSUIPC

local alt_m=alt_m_FSUIPC

local alt_ft=alt_ft_FSUIPC

local onrwy=0

local alt_ind=alt_ft_FSUIPC

local lat_S=100

local lon_W=100

 

-- Then index 21 for x-plane position info X,Y,Z,Vx,Vy,Vz, dist

local index3=21

local index3a=0

local index3b=0

local index3c=0

 

-- Add dummy values for some variables that FSUIPC doesnt have

local posX=-999

local posY=-999

local posZ=-999

local vX=Vx_m_s_FSUIPC

local vY=Vy_m_s_FSUIPC

local vZ=Vz_m_s_FSUIPC

local dist_ft=-999

local dist_m=-999

 

 

local newtable={data1, data2, data3, data4, data5, index1, index1a, index1b, index1c, pitch, roll, hdg_true, hdg_mag, blank1, blank2, blank3, blank4, index2, index2a, index2b, index2c, lat_D, lon_D, alt_ft, alt_m, onrwy, alt_ind, lat_S, lon_W, index3, index3a, index3b, index3c, posX, posY, posZ, vX, vY, vZ, dist_ft, dist_m}

 

newdgram = (vstruct.pack("9*u1 8*f4 4*u1 8*f4 4*u1 8*f4", newtable))

-- Leave this as we may later want to divide the data packet up in bits and send seperately

-- newtable1 ={data1, data2, data3, data4, data5, index1, index1a, index1b, index1c, pitch, roll, hdg_true, hdg_mag, blank1, blank2, blank3, blank4}

-- newtable2 ={data1, data2, data3, data4, data5, index2, index2a, index2b, index2c, lat_D, lon_D, alt_m, alt_ft, onrwy, alt_ind, lat_S, lon_W}

-- newtable3 ={data1, data2, data3, data4, data5, index3, index3a, index3b, index3c, posX, posY, posZ, vX, vY, vZ, dist_ft, dist_m}

 

-- newdgram1 = (vstruct.pack("9*u1 8*f4 ", newtable1))

-- newdgram2 = (vstruct.pack("9*u1 8*f4 ", newtable2))

-- newdgram3 = (vstruct.pack("9*u1 8*f4 ", newtable3))

 

--Send Data to HOST on PORT

udp2:sendto(newdgram, host, port)

 

-- -- udp2:sendto(newdgram1, host, port)

-- -- udp2:sendto(newdgram2, host, port)

-- -- udp2:sendto(newdgram3, host, port)

 

-- -- Sleep for 500 mSecs so the update gets done roughly 2 times per second

ipc.sleep(update_rate)

 

[Auto]

1=Lua FSXOzplug

 

end

Link to comment
Share on other sites

Ignoring the Log file for now, as it doesn't show any more than you showed already, is this REALLY the "FSXOzplug.lua" file you are using, the one in the FS Modules folder?

 

-- FSX Pulg-in for OzRunways "FSXOzplug.lua"

-- Author: Jason Beringer jason.beringer@monash.edu
-- 20/6/2012  Version 1.1
-- FSUIPC  (http://www.schiratti.com/dowson.html) Lua Plug-In
-- OzRunways EFB App for iPhone and Ipad (http://www.ozrunways.com/site/)
--(For FSUIPC4/ESPIPC version 4.60 and later, or FSUIPC3 version 3.98 and later)
-- Place in Modules folder
-- Code reads FSUIPC offsets and writes to UDP port 49002 in format of Xplane data packets
-- this makes OzRunways think it is connected to XPlane but really its FSX
--
--INSTALLATION
-- Download and install FSUIPC (http://www.schiratti.com/dowson.html) - version 4.60 and later, or FSUIPC3 version 3.98 and later
-- To install extract this file (FSX_OzRunways_plugin.lua) into directory ..... /Microsoft Games/Microsoft Flight Simulator X/Modules/
-- Requires vstruct in ..... /Microsoft Games/Microsoft Flight Simulator X/Modules/vstruct
-- Enter the IPad / IPhone IP address into the "host" below in the code
-- Edit the "FSUIPC.ini".  Add the following lines to the end (no dashes)
--[Auto]
--1=Lua FSXOzplug
 
--
--History
-- v1.0 First release June 2012
-- v1.1 Added current weather (wind speed and direction) as data output.  Added a few print statements to tack in FSUIPC log. Added comments
 
-----------------------------------------------------------------------------
 
--Required LUA Modules
local socket = require("socket")
local vstruct = require ("vstruct")
 
-- Define update rate here in mS
local update_rate=100 --0.1 seconds
 
print ("Loading FSXOzPlug")
-- Define IP and port
-- Enter the IP address of the IPad or Iphone that OzRunways is running on. 
-- Port 49002 is UDP port that XPlane communicates on and OzRunways expects
host = host or "192.168.0.3"  -- USER EDIT THIS FOR YOUR IPDA/IPHONE RUNNING OZRUNWAYS
port = port or 49002
 
-- Set options for UDP socket
print ("Setting up socket")
udp2 = socket.udp()
udp2:settimeout(0)
udp2:setoption('broadcast',true)
udp2:setoption('dontroute',true)
 
--Loop forever
print ("FSXOzplug running .....")
while 1 do
 
-- These are the variables OzRunways cares about
--For code 20  - lat,lon,altitude - index 0 = lat, 1=lon, 2=alt (units - lat/lon degrees, altitude is in feet)
--For code 21 - vx,vz (if that makes sense)-  index 3=vx  index 5=vz (units kts)
--For code 18 - heading (maybe more correctly, track, direction aircraft is pointing) - index 2=track (units degrees)
 
--Get data from FSUIPC
local gs_FSUIPC_raw, tas_FSUIPC_raw, ias_FSUIPC_raw,
lat_FSUIPC_raw, lon_FSUIPC_raw, alt_FSUIPC_raw, pitch_FSUIPC_raw, bank_FSUIPC_raw, hdgT_FSUIPC_raw,
mach_FSUIPC_raw,vs_FSUIPC_raw, Vz_ft_s_FSUIPC_raw, Vx_ft_s_FSUIPC_raw, Vy_ft_s_FSUIPC_raw, 
Mag_var_FSUIPC_raw, ambt_WS_knt_FSUIPC_raw,ambt_WD_T_FSUIPC_raw  = ipc.readStruct( 0x02B4, "3UD",
0x0560, "3DD", "2SD", "1UD",
0x11C6, "1UW",
0x0842, "1SW",
0x3190, "3DBL",
0x02A0, "1UW",
0x0E90, "2UW")
 
-- and convert it from FS units to units we like
local gs_FSUIPC = (gs_FSUIPC_raw * 3600) / (65536 * 1852)
local tas_FSUIPC = tas_FSUIPC_raw / 128
local ias_FSUIPC = ias_FSUIPC_raw / 128
local mach_FSUIPC = mach_FSUIPC_raw / 20480
local vs_FSUIPC = vs_FSUIPC_raw * -3.28084
local lat_FSUIPC = lat_FSUIPC_raw * 90 / (10001750 * 65536 * 65536)
local lon_FSUIPC = lon_FSUIPC_raw * 360 /  (65536 * 65536 * 65536 * 65536)
local alt_ft_FSUIPC = alt_FSUIPC_raw * 3.28084 / (65536 * 65536)
local alt_m_FSUIPC = alt_FSUIPC_raw / (65536 * 65536)
local pitch_FSUIPC = pitch_FSUIPC_raw * 360 / (65536 * 65536)
local bank_FSUIPC = bank_FSUIPC_raw * 360 / (65536 * 65536)
local hdgT_FSUIPC = hdgT_FSUIPC_raw * 360 / (65536 * 65536)
local Mag_var_FSUIPC = Mag_var_FSUIPC_raw * 360 / 65536
local hdgM_FSUIPC = hdgT_FSUIPC - Mag_var_FSUIPC
local Vz_m_s_FSUIPC=Vz_ft_s_FSUIPC_raw/3.28084
local Vx_m_s_FSUIPC=Vx_ft_s_FSUIPC_raw/3.28084
local Vy_m_s_FSUIPC=Vy_ft_s_FSUIPC_raw/3.28084
local ambt_WD_T_FSUIPC = ambt_WD_T_FSUIPC_raw * 360 / 65536
local ambt_WS_knt_FSUIPC = ambt_WS_knt_FSUIPC_raw 
 
-- Now produce the datagram for Xplane UDP packet
-- First part the "DATA" phrase
local data1=68
local data2=65
local data3=84
local data4=65
local data5=64
 
-- Then index 17 for xpplane pitch, roll, hdg
-- Note in Xplane ten this is 17 but we output 18 because that is what OzRunways expects
local index1=18
local index1a=0
local index1b=0
local index1c=0
 
local pitch=pitch_FSUIPC
local roll=bank_FSUIPC
local hdg_true=hdgT_FSUIPC
local hdg_mag=hdgM_FSUIPC
local blank1=ambt_WD_T_FSUIPC -- This was previously blank for Xplane but I have added weather info here
local blank2=ambt_WS_knt_FSUIPC -- This was previously blank for Xplane but I have added weather info here
local blank3=-999
local blank4=-999
 
-- Then index 20 for x-plane lat,lon,alt,etc.
local index2=20
local index2a=0
local index2b=0
local index2c=0
local lat_D=lat_FSUIPC
local lon_D=lon_FSUIPC
local alt_m=alt_m_FSUIPC
local alt_ft=alt_ft_FSUIPC
local onrwy=0
local alt_ind=alt_ft_FSUIPC
local lat_S=100
local lon_W=100
 
-- Then index 21 for x-plane position info X,Y,Z,Vx,Vy,Vz, dist
local index3=21
local index3a=0
local index3b=0
local index3c=0
 
-- Add dummy values for some variables that FSUIPC doesnt have
local posX=-999
local posY=-999
local posZ=-999
local vX=Vx_m_s_FSUIPC
local vY=Vy_m_s_FSUIPC
local vZ=Vz_m_s_FSUIPC
local dist_ft=-999
local dist_m=-999
 
 
local newtable={data1, data2, data3, data4, data5, index1, index1a, index1b, index1c, pitch, roll, hdg_true, hdg_mag, blank1, blank2, blank3, blank4, index2, index2a, index2b, index2c, lat_D, lon_D, alt_ft, alt_m, onrwy, alt_ind, lat_S, lon_W, index3, index3a, index3b, index3c, posX, posY, posZ, vX, vY, vZ, dist_ft, dist_m}
 
newdgram = (vstruct.pack("9*u1 8*f4 4*u1 8*f4 4*u1 8*f4", newtable))
-- Leave this as we may later want to divide the data packet up in bits and send seperately
-- newtable1 ={data1, data2, data3, data4, data5, index1, index1a, index1b, index1c, pitch, roll, hdg_true, hdg_mag, blank1, blank2, blank3, blank4}
-- newtable2 ={data1, data2, data3, data4, data5, index2, index2a, index2b, index2c, lat_D, lon_D, alt_m, alt_ft, onrwy, alt_ind, lat_S, lon_W}
-- newtable3 ={data1, data2, data3, data4, data5, index3, index3a, index3b, index3c, posX, posY, posZ, vX, vY, vZ, dist_ft, dist_m}
 
-- newdgram1 = (vstruct.pack("9*u1 8*f4 ", newtable1))
-- newdgram2 = (vstruct.pack("9*u1 8*f4 ", newtable2))
-- newdgram3 = (vstruct.pack("9*u1 8*f4 ", newtable3))
 
--Send Data to HOST on PORT
udp2:sendto(newdgram, host, port)
 
-- -- udp2:sendto(newdgram1, host, port)
-- -- udp2:sendto(newdgram2, host, port)
-- -- udp2:sendto(newdgram3, host, port)
 
-- -- Sleep for 500 mSecs so the update gets done roughly 2 times per second
ipc.sleep(update_rate)
 
[Auto]
1=Lua FSXOzplug
 
end

 

If so I can immediately see two errors. But it puzzles me why you ask me about another person's program when he gives his name and email there for you, i.e.

 

Jason Beringer jason.beringer@monash.edu

 

Has he deceased or in other ways become non-responsive?

 

Anyway:

 

-- Define IP and port
-- Enter the IP address of the IPad or Iphone that OzRunways is running on. 
-- Port 49002 is UDP port that XPlane communicates on and OzRunways expects
host = host or "192.168.0.3"  -- USER EDIT THIS FOR YOUR IPDA/IPHONE RUNNING OZRUNWAYS
port = port or 49002
 
That is mostly an instruction for YOU to edit those two lines. They are not correct Lua statements. You need to put your host's name or IP address into the first line, as
 
host ="name"
 
or
 
host="ip address"
 
Where you replace ip address with the correct one. "192.168.0.3" is merely an example of an IP address. Is it the correct one? The author uses the word "host" as being the PC or iPad or whatever which is running whatever it is you are wanting this to talk to (OzRunways?)
 
The port line should probably just be
 
port=49002
 
I think he says "port or 49002" in case that port is already used by another program -- you'd need to change it at both ends if so..
 
The second problem is
 
[Auto]
1=Lua FSXOzplug
 
just before the final "end" line. That is not Lua. You already added those lines into the FSUIPC4.INI file. Why did you add them into the Lua file too? Delete them.
 
Pete
 
Link to comment
Share on other sites

Hi Pete

 

Hi Pete

Thanks for your helpful comments

The "192.168.0.3" is  what  was added by me and is what I got from settings on the pad. the port could be the wrong one but I will have to do some research on how to fix that. in FSx there is a FSUIPC add on drop down menu and all these settings can be changed. there is another tab GPSout. changes in this drop down box seams to change the FSUIPC.ini I assume those settings are correct. just some back ground I started this project late last year and I did try to contact  Jason Beringer  first over the last  two mouths and had no reply (I know that's not your problem) I am trying to make scene of what does what. It does seam the problem is in communications between my PC running FSx and the Ipad running ozrunways Thanks again for you help i know it not your problem  

Regards

Darryl   

Link to comment
Share on other sites

The "192.168.0.3" is  what  was added by me and is what I got from settings on the pad. the port could be the wrong one but I will have to do some research on how to fix that

 

I didn't say it was wrong, only that the line:

host = host or "192.168.0.3" 

is wrong. You only want

host = "192.168.0.3"

 

Similarly 

port = port or 49002

should be

port = 49002

 

I did point this out before. You seem to have missed it?

 

in FSx there is a FSUIPC add on drop down menu and all these settings can be changed. there is another tab GPSout. changes in this drop down box seams to change the FSUIPC.ini I assume those settings are correct.

 

Well of course ALL settings made in FSUIPC change the INI file because that is where they are stored! But you aren't using GPSout! If you are going to use that you wouldn't be using the Lua plug-in! And GPSout won't send stuff to an iPad unless it is connected by serial port cable and configured with a GPS moving map application set to accept external NMEA data instead of using the internal GPS. 

 

I am trying to make scene of what does what. It does seam the problem is in communications between my PC running FSx and the Ipad running ozrunways   

 

That communication is handled entirely in that Lua plug-in, NOT in GPSout!  GPSout either sends data to WideClient running on another PC, or to a serial port. It cannot talk to an iPad over the Network, only via a serial port link!

 

Pete

Link to comment
Share on other sites

   Hi Pete

I Know you must look forward to my messages every morning when you come into the office (not) sorry to be a pain.

 

I am taking on board what you are saying, I am also starting to understand the process a bit more. on talking to the ozrunways tech team they don't know why I am having so much trouble with it, they  say  down load register and install the software and make the changes as per there instructions and it runs with out any trouble. so I am not sure why mine is so different I think it time to give up on this project. Thanks for your time and help i know it is not your problem.  

 

The following errors show the two files are missing have hot shown up before is that any thing to do with it 

 

91485 Starting everything now ...

    91531 Error 126 (The specified module could not be found. ) "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\PFCFSX.DLL"

    91531 Error 126 (The specified module could not be found. ) "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\EPICINFO5.DLL"

 

Thanks again

kind regards 

Darryl 

Link to comment
Share on other sites

I am taking on board what you are saying, I am also starting to understand the process a bit more. on talking to the ozrunways tech team they don't know why I am having so much trouble with it, they  say  down load register and install the software and make the changes as per there instructions and it runs with out any trouble. so I am not sure why mine is so different I think it time to give up on this project. Thanks for your time and help i know it is not your problem.  

 

Did you not try again with those two lines corrected? If so, what is the problem now?

 

 
The following errors show the two files are missing have hot shown up before is that any thing to do with it 
 
91485 Starting everything now ...
    91531 Error 126 (The specified module could not be found. ) "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\PFCFSX.DLL"
    91531 Error 126 (The specified module could not be found. ) "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\EPICINFO5.DLL"
 
They're just for information in case you are using either of these additional drivers. 
 
Pete
 
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.