Jump to content
The simFlight Network Forums

Recommended Posts

Updated June 2017

Please see the below link to set up MyTraffic 6 for Prepar3D v3 and v4 using the add-on.xml file method 

 
 
================================================================================
===============================================================================
 
 
 
-------
Introduction
------
 
Step by Step Guide to Install and Set up MyTraffic 6a for Prepar3D 
 
MyTraffic 6a is a Payware Traffic Add On for Prepar3D,  Bringing AI Airplane Traffic to all your favorite Airports.
 
MyTraffic 6a is the latest Version and Compatible with all Version's of Prepar3D,  V1.4  V2 and V3  (All Version of V3) 

 

=====

You can Setup and Configure MyTraffic 6a in 2 ways.....  

(1)  The Official way: By using the MyTaffic 6 Communicator  "MyTraffic 6 Control Panel" 
 
(2)  Manually:  Not using the Communicator
 
=====
 
INDEX  
 
(1)  To Setup MyTraffic 6a the Official way using the Communicator,   Prepar3D V3 
 
         Installing MyTraffic 6a 
 
         The Communicator (3 simple steps)
 
         Turning off AI traffic  (Default Prepar3D Traffic)
 
          Adding the MyTraffic folder to your Prepar3D Scenery Library
 
=====
 
 (2)  To Setup MyTraffic 6a Manually (simobjects.cfg) Prepar3D V3
         
         Installing MyTraffic 6a to the Default C Drive
 
         Installing MyTraffic 6a to a Different Location
 
=====
 
(3)  To Setup MyTraffic 6a Manually for Prepar3D V2
 
=====
 
(4)   Possible CDT'S Crash To Desktop when using MyTraffic 6a 
 
 
=====================================
 
* First:  Before you run the MyTraffic 6a Installer (Important) 
 
* Temporary Disable your Firewall and all Anti Virus Software OR Windows Defender
 
* Disable UAC User Account Control,   Set to Never Notify 
 
==============
 
 
 
(1)  To Setup MyTraffic 6a the Official way using the Communicator Prepar3D V3 
 
        Installing MyTraffic 6a
 
The MyTraffic 6a Installer will Install 11 gigs of Data so please pick a suitable place to Install Insuring you have enough space 
 
Do Not Install into your Prepar3D Core Folder,  MyTraffic 6 Installs OUTSIDE your Prepar3D Core folder
 
You can Install to the Default C Drive Or Install to any Location you choose,  The Communicator (Control Panel) will add an [Entry] to your Simobjects.cfg that will make My Traffic 6 work from any Location on your Computer.
 
 
Right Click on MyTraffic Professional.msi  Click Install 
 
29952685263_c28c10a4e2_o.png
 
 
 
 
The Communicator  (3 simple steps)  setting up the Simobjects.cfg
 
        Step 1: Localize MyTraffic
 
When the Installation process has completed the Communicator should pop up, If not, check your Start Menu (Programs)  as sometimes it can be hiding in there. You can click and drag the  Communicator to your Desktop  
 
1 Click Configure MyTraffic and then Localize MyTraffic.  If you have Installed to the Default C Drive, it will read   C:\MyTraffic Professional\MyTraffic 
 
 If you have Installed to a different Location and Did Not create a folder it may read like this   G:\MyTraffic.    2 Click Ok.
 
30469489572_3d8c7e742c_o.png
 
 
 
 
Step 2: Localize Prepar3D v3
 
1 Click Manage Prepar3D V2/V3   2 Click Localize Prepar3D v3     3  Click Ok  
 
29952708683_959820ed32_o.png
 
 
 
 
Step 3:  Adding the Simobjects.cfg Entry
 
1 Click Manage Prepar3D V2/V3   2 Click Manage simobjects.cfg - v3    3 The Simobjects box will pop up.    
 
4 Click Add MyTraffic  You will have to scroll down to see your new [Entry],  As you can see I now have the proper [Entry] for my Simobjects.cfg.    5 Click Save and Close
 
30549848576_ab2114ccb2_o.png
 
 
 
If You have Installed MyTraffic 6 to a Different location your [Entry] will be shortened like this 
 
24785063871_d72aeb244a_o.png
 
 
 
 
Turning off AI traffic (Default Prepar3D Traffic)
 
We will Not be needing the Prepar3D Default AI Traffic now.  We can turn this off by going to Your Prepar3D V2\V3 Install location  
 
Follow the path:  ►  Prepar3D v3  ► Scenery  ► World  ► scenery
 
Follow the steps.  1 Right Click on trafficAircraft.bgl  Click Rename   2 Remove the bgl and Add off to the end, make sure you don't delete the Full Spot .  
 
3 What it should look like,  trafficAircraft.off
 
30307268310_2b2495a1a0_o.png
 
 
 
 
Adding the MyTraffic folder to Your Prepar3D Scenery Library
 
Launch Prepar3D.  Click World (Top Left)  Click Scenery Library.    1 Click Add Area.  2  and 3  Browse through your Drives and Locate the MyTraffic folder,  This is the Exact folder that you should add.
4 and 5  Click Ok
 
29952732003_cd45aea59b_o.png
 
 
 
Make sure you Pick the Correct folder 
 
The correct folder is The MyTraffic folder  

 

29954546794_61535ee9da_o.png

 

 

 

1 I will now move the MyTraffic Scenery down to just above Global, Generic & Vehicle Libraries   This is the Recommended order.  2 Click Ok

 
29952732583_7820ab3e19_o.png
 
 
 
 
To see MyTraffic 6 Planes,  You Need to adjust up your Aviation Traffic sliders in   Prepar3D > settings 
 
The more you move up the Settings the more Traffic you will see. Note: High settings will have an Impact on Performance 
 
29954533044_b1a0161f97_o.png
 
 
Note: You will know if your Simobjects.cfg is set up correctly if Prepar3D is taking longer to Launch to the Splash Screen 
 
 
============================================================
============================================================
============================================================
 
 
 
 
(2)  To Setup MyTraffic 6 Manually (simobjects.cfg) Prepar3D V3
 
MyTraffic 6 is Launched "Connected"  to Prepar3D in 2 ways,  Your Simobjects.cfg and through your Prepar3D Scenery Library
 
Below are steps to setup your Simobjects.cfg Manually  
 
---------------
 
Note: You will still have to add your MyTaffic folder to your Prepar3D Scenery Library and Turn Off Default Prepar3D Traffic.  
 
Manually setting up your simobjects.cfg
 
Installing MyTraffic 6 to the Default C Drive
                           
After you Install MyTaffic 6,  The communicator "MyTraffic 6 Control Panel" will pop up,  Close it we will not be using it.  We will now add an Entry to your simobjects.cfg 
 
The Default Install folder Location for MyTraffic 6 is  C\MyTraffic Professional 
 
Your Path in simobjects.cfg will be this    Path=C:\MyTraffic Professional\MyTraffic\Aircraft 
 
It will look like this in your Simobjects.cfg 
 
[Entry.10] 
Title=MyTraffic Vehicles 
Path=C:\MyTraffic Professional\MyTraffic\Aircraft
Required=False
Active=True

If you have Installed MyTraffic 6 to the Default Location,  You can Copy and Paste the above Entry into Your Simobjects.cfg 

 
Go to  ► Computer ► Local Disk (C:) ►ProgramData ► Lockheed Martin  ► Prepar3D v3  >  Simobjects.cfg 
 
 
Follow the steps in the image below. 1 Double Click on Simobjects.cfg to Open. 2 Your Simobjects Note pad will pop up. 3  Paste your new Entry in at the bottom. 4  Go to File and Click Save
 
Pay attention to the correct Numbering order in the Image, Click the Image, Read the Tex 
 
30627434825_a951fd7ddd_o.png
 
 
I have now added the MyTaffic 6 Entry to my Simobjects.cfg 
 
As you can see from the Image this is a Default simobjects.cfg with 1 Add On  MyTraffic 6
 
If you have more then a Default 9 Entry's in your Simobjects.cfg, You need to change the [Entry] Number to suit Your simobjects.cfg.  The Entry Numbers Start at 0 and go down,  If the Numbers are Not correct Prepar3D Will Not see your new [Entry] and MyTraffic 6 Will Not Launch  
 
29994274623_7fb0597387_o.png

 

 

 

Installing MyTraffic 6 to a Different Location

 

Important Question:

 
If you Installed MyTraffic 6 somewhere else as apposed to the Default location, did you Create a folder to Install MyTraffic 6 to ?  What did you name this folder ?
 
This is important because this extra folder extension will change the folder path= in your simobjects.cfg ! 
 
For Example:  I am now Installing MyTraffic 6 and have decided to Install to my G Drive,  I will Create and name a folder called   MyTraffic6   and point the Installer to it, Note: Notice how i left No spaces when i named this folder !  
 
You need to spell the Name of the folder you Created exactly the same including the spaces in your simobjects.cfg,  If you are even one digit or space out MyTraffic 6 Will Not launch
 
Not creating a folder to install to
 
If you have Installed Mytraffic 6 to a Different location and Not the default Location,  The MyTraffic 6 Installer will Automatically create a folder called  MyTraffic
 
Your simobjects.cfg Path will be  Path=X:\MyTraffic\Aircraft   You will have to change the Drive Letter to suit your Install location 
 
I left an X  in my path,  Change this X to suit your Install Drive letter   
 
[Entry.10] 
Title=MyTraffic Vehicles 
Path=X:\MyTraffic\Aircraft 
Required=False
Active=True

 

Note:  You will know if your Simobjects.cfg is set up correctly if Prepar3D is taking longer to Launch to the Splash Screen 
           
         *  You will still need to add the MyTaffic folder to your Prepa3D Scenery Library and Turn Off Default Prepar3D Traffic
 
 
==========================================================
==========================================================
==========================================================
 
 
 
 
(3)  To Setup MyTraffic 6 Manually for Prepar3D V2
 
This is the very same procedure as Manually setting up for Prepar3D V3,  Adding an Entry to your Simobjects.cfg + adding your the MyTraffic folder to your Prepar3D Scenery Library
 
Setting up your Simobjects.cfg Manaully 
 
By Default you will have 8 Entry's in your Simobjects.cfg.  If you have Installed MyTraffic 6 to the Default C Drive.....
 
Your Entry will look like this 
 
[Entry.9]
Path=C:\MyTraffic Professional\MyTraffic\Aircraft

 

Go to  ► Computer ► Local Disk (C:) ► ProgramData ► Lockheed Martin ► Prepar3D V2    Double Click on Simobjects.cfg to open 

 
If you have Installed MyTraffic 6 to the Default C Drive you can Copy and Paste the above Entry into your Simobjects.cfg
 
When added to your Simobjects.cfg, it will look like this.  This is a Default simobjects.cfg with 1 Add On Mytraffic 6  
 
[Entry.0]
Path=SimObjects\Airplanes
[Entry.1]
Path=SimObjects\Rotorcraft
[Entry.2]
Path=SimObjects\GroundVehicles
[Entry.3]
Path=SimObjects\Boats
[Entry.4]
Path=SimObjects\Animals
[Entry.5]
Path=SimObjects\Misc
[Entry.6]
Path=SimObjects\Submersible
[Entry.7]
Path=SimObjects\Weapons
[Entry.8]
Path=SimObjects\Countermeasures
[Entry.9]
Path=C:\MyTraffic Professional\MyTraffic\Aircraft

 

 
Note: You will still have to add your MyTaffic folder to your Prepa3D Scenery Library and Turn Off Default Prepar3D Traffic.  ( See above Instructions to do this)
 
 
============================================================
============================================================
============================================================
 
 
 
 
(4)   Possible CDT'S Crash To Desktop when using MyTraffic 6
 
Some users are reporting NTDLL.LL crashes when using MyTraffic 6.  If you are experiencing these CDT'S You can Disable The Military aircraft in your MyTraffic scenery folder.
 
You can Disable Military aircraft and then check to see if this helps your issue 
 
Go here:  Local Disk ► MyTraffic Professional ► MyTraffic ► Scenery 
 
Locate this file  MyTrafficmil.bgl   Rename this file to MyTrafficmil.bgl.orig this will Disable Military aircraft
 
Edited by Elaine Dixon
  • Upvote 1

Share this post


Link to post
Share on other sites

Thanks Elaine, very easy to follow and helpful.

Thank to your post I discovered that MyTraffic was compatible with P3D v3.4 !

Share this post


Link to post
Share on other sites

I bet the manual configuration will work for Prepar3d V4 too.  I'll give is a whirl when I get it Tuesday. 

 

Update: the Manual method also works on PrePar3D version 4  :)

Share this post


Link to post
Share on other sites

Introduction
 

To Use MyTraffic 6a for Prepar3D v4 using the add-on.xml file system. Note: This is also relevant for Prepar3D v3.3 and up 

-------------

The following steps is to use MyTraffic 6 for Prepar3D v4 using the add-on.xml file system,  Using this method we Do Not need to use the Communicator and we Do Not need to add any entries to the simobjects.cfg file or the Scenery Library.

The add-on.xml file will have all the Information to launch and use MyTraffic 6,  We will Insert this file into the Prepar3D v4 Add-on's folder in Documents 

-------------------------------------------------------


First you need to install MyTraffic 6,  Insure you Disable your Antivirus Software and User Account Control (UAC)

Run the Mytraffic 6 Installer as administrator 


-----------------------

 
We will first create an "add-on.xml"  file,  We will then add the MYtraffic 6 entry

Below is a complete Image of what it will look like when finished 

Click on the Image to view in full Resolution 

34998654312_d616ecc1c8_o.png

 

 


Creating an add-on.xml file 

1) Right click anywhere on your desktop,  Click New,  Click Tex Document  You will now have a little white file on your desktop
 
2) Right Click on this white file,  Click Rename   Call this file  add-on.xml
 
3) Go to:  Documents > Prepar3D v4 Add-ons,  Create and Name a new folder inside calling it MyTraffic6 
 
4) Now click and drag your new add-on.xml file and pop it into the new folder MyTraffic6

--------------------------

 


Adding the MyTraffic 6 entry to the add-on.xml file
 
Right Click on your new add-on.xml file and Open.

Please Note: If you have Installed Mytraffic 6 to the Default C Drive location you can Copy the below entry and Paste it into your add-on.xml file,  Insure you Save it 

If you have Installed MyTraffic 6 to a different location,  You need to change the  2 <Path>'s to suite your Install location 

 

<?xml version="1.0" encoding="UTF-8"?>
<SimBase.Document Type="AddOnXml" version="4,0" id="add-on">
<AddOn.Name>MyTraffic6</AddOn.Name>
<AddOn.Description>MyTraffic6.</AddOn.Description>

<AddOn.Component>
<Category>SimObjects</Category>
<Path>C:\MyTraffic Professional\MyTraffic\Aircraft</Path>
</AddOn.Component>

<AddOn.Component>
<Category>Scenery</Category>
<Path>C:\MyTraffic Professional\MyTraffic</Path>
<Name>MyTrafficScenery</Name>
<Layer>114</Layer>
</AddOn.Component>

</SimBase.Document>

 

Launch Prepar3D,  You will see this message, Click Yes,  MyTraffic 6 is now active  

34998654962_f5c2eec248_o.png

 


If you Click Options > Add-ons  You can now enable and disable MyTraffic 6 by ticking the box (A restart is required to take effect) 

34998655492_8b1230ff28_o.png

 

 

---------------------------------------

Additional Information  (Important) 

1) Disable Mytraffic Military aircraft from possible causing you Crash's (CDT)

Go here: Local Disk (c) ► MyTraffic Professional ►MyTraffic ►Scenery,  Locate this file MyTrafficmil.bgl 

Rename this file to MyTrafficmil.bgl.orig This will Disable Military aircraft

--------------

2) Turning off Default AI aircraft traffic,  Please see here for a Video and here for an Image

-------------

3) You need to adjust up the Traffic Sliders in Prepar3D > Settings to see MyTraffic 6 planes 

-------------

4) If you look at the bottom of the add-on.xml file you will see this "<Layer>114</Layer>"  This command will Insert the MyTraffic scenery 114 lines from the bottom of the Prepar3D Scenery Library,  This is the recommended position,  You can adjust this yourself by editing this number and saving it

------------

5) You will experience long loading times when MyTraffic 6 is enabled,  This is normal

Edited by Elaine Dixon
  • Upvote 3

Share this post


Link to post
Share on other sites

Hi Elaine Dixon

Thank you for your guide. 

Could you or someone cast a glance and see if they can find the error?

Becase No planes show up yet. 

Should I create a scenery folder in the C:\Users\Julean\Documents\Prepar3D v4 Add-ons\MyTraffic6 folder?

Thank you.

Jens 

 

My XML text 

<?xml version="1.0" encoding="UTF-8"?>
<SimBase.Document Type="AddOnXml" version="4,0" id="add-on">
<AddOn.Name>MyTraffic6</AddOn.Name>
<AddOn.Description>MyTraffic6.</AddOn.Description>

<AddOn.Component>
<Category>SimObjects</Category>
<Path>E:\MyTraffic Professional\MyTraffic\Aircraft</Path>
</AddOn.Component>

<AddOn.Component>
<Category>Scenery</Category>
<Path>E:\MyTraffic Professional\MyTraffic</Path>
<Name>MyTrafficScenery</Name>
<Layer>131</Layer>
</AddOn.Component>

</SimBase.Document>

This is the entry in

scenery.cfg


[Area.114]
Title=LocalMeshesNG
Local=E:\FSGU_NG\LocalMeshes
Layer=114
Active=TRUE
Required=FALSE

[Area.115]
Title=MyTraffic6
Local=C:\Users\Julean\Documents\Prepar3D v4 Add-ons\MyTraffic6
Layer=115
Active=TRUE
Required=FALSE

[Area.116]
Title=Africa
Local=Scenery\AFRI
Layer=116
Active=TRUE
Required=FALSE
C:\ProgramData\Lockheed Martin\Prepar3D v4

 

5.jpg

7.jpg

Share this post


Link to post
Share on other sites

I had the same issue. Elaine's elegant xml has a small easily correctable flaw. In both path statements remove the space between Traffic and Professional so it reads: MyTrafficProfessional After I did that everything else worked fine. In hindsight, since I did a nonstandard install I probably inadvertently removed the space in my path. This seems most likely since this has worked for others. I do hope this is helpful for Julean. 

Edited by MadMac388th

Share this post


Link to post
Share on other sites
On 22/6/2017 at 11:45 PM, MadMac388th said:

I had the same issue. Elaine's elegant xml has a small easily correctable flaw. In both path statements remove the space between Traffic and Professional so it reads: MyTrafficProfessional After I did that everything else worked fine. In hindsight, since I did a nonstandard install I probably inadvertently removed the space in my path. This seems most likely since this has worked for others. I do hope this is helpful for Julean. 

Hi MadMac388th.

No i didn't work... and I am really baffled how people have AI aircraft in their game. 

Then i have installed trafficaircraftbuilder... and that didnt help either... 

Really a mystery..

4.jpg

5.jpg

6.jpg

Share this post


Link to post
Share on other sites

Anyway .....where is entry 2.... ?  And it does not get better down the list...

This scenery cfg looks messy... I wil try to delete and rebuild it... 

But.... its showing the p3d v3 ..which I have unstalled......

I have tried once to remove the folders of the old P3D v3.

Which there is a somewhat for me slobby guide for.

http://www.prepar3d.com/forum/viewtopic.php?f=6322&t=125046

.. And that was not funny..... Now I dont dare to do it...

Here my explantion of that, from that time where there was problems with the old conflicting FSUIPC 5 and PMDG 747, which has now been solved.

Jens 

OLD POST:

 

  On 8/6/2017 at 2:03 PM, harvester21 said:

At the moment it seems the way to resolve the issue. Keep in mind that p3dV4 developments are still ongoing and that a fix for this will probably come sooner than later. Be it from PMDG or from Pete Dowson or LM as mentioned in the post from Mark just above mine.

I see. Thank you for the answer.

Because I have Radar Contact, the best working ATC I can get to manage, and therefore I have FSUIPC 5 registred. 
Which I also need by the way to get X-55 Rhino to work with the throttles.

So when i Load the 747: I load default F-22 and then 747 and back to F-22 and back...An after kicking and shaking the bird. ..Then she is ready...:rolleyes:

Until I corrupted the scenery.cfg with a Drzewiecky Baku X that when I tried to follow the procedure for reinstalling the scenery.cfg which I found different places.. Everything went into crisis:wacko:

http://www.prepar3d.com/forum/viewtopic.php?f=6322&t=125046

All with these half sloppy adresse · %LOCALAPPDATA%\Lockheed Martin\Prepar3D v4 :marah:

Where one dont know what one is deleting.

That sent my whole computer inte selfrepair mode.:huh:

  Quote

These days: I have created an add-on folder  to put the Drzewiecky sceneries in I guess... I mean quite a change I use to have 850 scenery layers in FSX, And wonder where the Aerosoft sceneries are? Proberly externally now. Then to add FT Global meshes. And i see the Flightbeam and FSDreamteam sceneries push themselve now on top all the time in the scenerylist. ... MyTraffic; I at this time cant gett to work. And with the new codes for scenery.cfg, I dont dare to touch it either.

And then its to get FTX central from the Orbx sceneries, to arranges everything correctly.

So everyone is working high pitch in making this awesome simulator is really looks like becomming to work nicely.

 

All the best

 

Jens 

Screenshots. of the P3D V3 IN THE COMMUNICATOR... 6.0 WHICH IS THE 6.0a

7.jpg

Share this post


Link to post
Share on other sites
On ‎6‎/‎24‎/‎2017 at 8:30 AM, Julean said:

Anyway .....where is entry 2.... ?  And it does not get better down the list...

This scenery cfg looks messy... I wil try to delete and rebuild it... 

But.... its showing the p3d v3 ..which I have unstalled......

I have tried once to remove the folders of the old P3D v3.

Which there is a somewhat for me slobby guide for.

http://www.prepar3d.com/forum/viewtopic.php?f=6322&t=125046

.. And that was not funny..... Now I dont dare to do it...

Here my explantion of that, from that time where there was problems with the old conflicting FSUIPC 5 and PMDG 747, which has now been solved.

Julean, you shouldn't have to modify your cfg files at all. There are 2 <path> statements in the xml file. If the one you posted is current, I'm still seeing a space between MyTraffic and Proffessional in both of your <path> statements. The first path statement is in line 7 (counting from the top) the second is in line 11. The path statement both times in the xml file needs to match exactly your path statement to MyTraffic. In my case it is: C:\P3D\MyTrafficProffessional, which did not quite match what is in the xml file. when I edited the path statement in the xml to match the one on my computer, it started working. Good luck!

Share this post


Link to post
Share on other sites

Hello Elaine,

 

Thank you for the instructions for p3d v4. I am not getting that pop-up message asking me to enable the add-on.xml. Not sure what i'm doing wrong. 

Thank you,

Pablo Vazquez

Share this post


Link to post
Share on other sites
On 10/06/2017 at 1:50 PM, Julean said:

Could you or someone cast a glance and see if they can find the error?

Becase No planes show up yet. 

 

Hello

I am only seeing this now

If you are using the add-on.xml method you Do Not add an entry to your Scenery.cfg file or your Simobjects.cfg file 

-------------

First:  Insure you have My Traffic 6 Installed to the location you are Inputing in your <Path>  Do you have MyTraffic 6 Installed to your E Drive ?  Did you Install this by default ?  Or did you Create and Name a folder during the Install Process ?  This is relevant because it will change the <Path> In your add-on.xml file.  The <Path> name must be Inputted and spelt exactly as to where MyTraffic 6 is located on your computer

 

Next: Are you sure your add-on.xml file is actually saved as an .xml file and not still as a Tex Document ?  Insure you have this box Un-Ticked just like the below Images shows in File Explorer Options  Un-Tick the Box and click Apply ---> https://c1.staticflickr.com/5/4254/35000883950_2eed3aafbf_o.png  

Then go back and Insure your add-on.xml is this add-on.xml,  Maybe it says this add-on.xml.txt ?    If so just remove the .txt and Save it

Let us know how you are getting on 

Edited by Elaine Dixon

Share this post


Link to post
Share on other sites

Hi Elaine,

Thanks for the detailed instructions. MT6 now running via the add-on file rather than scenery.cfg.

Just one point for users of P3D v3.4. The MyTraffic6 folder needs creating in Users\XXXX\Documents\Prepar3D v3 Add-ons

Share this post


Link to post
Share on other sites

Hi Elaine, thanks for this, I have MyTraffic now working in P3D v4. 

However I do get a crash on exit, NOTE this only happens when I quite P3D v4: (could this be because of the military aircraft?)

Log Name:      Application
Source:        Application Error
Date:          7/1/2017 4:18:37 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ROBS-PC
Description:
Faulting application name: Prepar3D.exe, version: 4.0.28.21686, time stamp: 0x594a7255
Faulting module name: ntdll.dll, version: 10.0.15063.0, time stamp: 0xb79b6ddb
Exception code: 0xc0000374
Fault offset: 0x00000000000f775f
Faulting process id: 0x35ec
Faulting application start time: 0x01d2f2a5b79959db
Faulting application path: F:\Program Files\Lockheed Martin\Prepar3D v4\Prepar3D.exe
Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll
Report Id: 6f00a10b-0d38-4e12-a122-92654979a4ba
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2017-07-01T20:18:37.350279800Z" />
    <EventRecordID>8554</EventRecordID>
    <Channel>Application</Channel>
    <Computer>ROBS-PC</Computer>
    <Security />
  </System>
  <EventData>
    <Data>Prepar3D.exe</Data>
    <Data>4.0.28.21686</Data>
    <Data>594a7255</Data>
    <Data>ntdll.dll</Data>
    <Data>10.0.15063.0</Data>
    <Data>b79b6ddb</Data>
    <Data>c0000374</Data>
    <Data>00000000000f775f</Data>
    <Data>35ec</Data>
    <Data>01d2f2a5b79959db</Data>
    <Data>F:\Program Files\Lockheed Martin\Prepar3D v4\Prepar3D.exe</Data>
    <Data>C:\WINDOWS\SYSTEM32\ntdll.dll</Data>
    <Data>6f00a10b-0d38-4e12-a122-92654979a4ba</Data>
    <Data>
    </Data>
    <Data>
    </Data>
  </EventData>
</Event>

Share this post


Link to post
Share on other sites
On 7/1/2017 at 10:02 PM, JBBlack said:

Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll

Hello JB

As a process of elimination Disable the Mytraffic Military aircraft from possibly causing you these Crash's 

Go here: Local Disk (c) ► MyTraffic Professional ►MyTraffic ►Scenery,  Locate this file MyTrafficmil.bgl 

Rename this file to MyTrafficmil.bgl.orig This will Disable Military aircraft

Then launch Prepar3D and test 

Edited by Elaine Dixon

Share this post


Link to post
Share on other sites

Hi, My p3d4 is in C;. My p3d4 add on is in d drive. I follow your instructions but no mytraffic6 loading when I start the sim.

As I see in the p3d4 add on the FSDT for GSX xml file is there, and it is loading correctly.

please help me

Share this post


Link to post
Share on other sites
On ‎7‎/‎4‎/‎2017 at 7:38 AM, Elaine Dixon said:

Hello JB

As a process of elimination Disable the Mytraffic Military aircraft from possibly causing you these Crash's 

Go here: Local Disk (c) ► MyTraffic Professional ►MyTraffic ►Scenery,  Locate this file MyTrafficmil.bgl 

Rename this file to MyTrafficmil.bgl.orig This will Disable Military aircraft

Then launch Prepar3D and test 

This worked, thanks.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×