Jump to content
The simFlight Network Forums

FSX Steam Problem with 3rd Party software program


Recommended Posts

Hi Pete,

I have recently purchased FSX Steam and installed FSUIPC 4.962.  I am using Windows 7 and when I try to load FSX I get the following message 

FS detected a problem with third party software program (add-on)

Name FSUIPC4 DLL: FS new univesal IPC interface

Version 4.962

Company Peter L Dowson

File Module\FSUIPC4.dll

DO you want to run this software (not recommended)

When I run the program it says fatal error and shuts down FSX.

 I have noticed on the forums that sometimes you require certain information from users. Below is the installer log which you might need.

I have looked through the various forums and have not found the specific problem I am having however not being very computer literate i might have missed something. Please let me know if you require any further information.

Your assistance would be greatly appreciated.

Regards,

Installer for FSUIPC4.DLL version 4.962


Looking in registry for FSX install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0
     Parameter"SetupPath"
... >>>  OK! FOUND FSX!  <<< ...
     SetupPath=D:\Steam\steamapps\common\FSX

Looking in registry for FSX-SE install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\DovetailGames\FSX
     Parameter"Install_Path"
... >>>  OK! FOUND FSX-SE!  <<< ...
     SetupPath=D:\Steam\steamapps\common\FSX

************ BUT this is the same path as for FSX! Will only install for FSX-SE ************


Looking in registry for Prepar3D v1 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D
     Parameter"AppPath"
... NOT found! ...

Looking in registry for Prepar3D v2 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v2
     Parameter"AppPath"
... NOT found! ...

Looking in registry for Prepar3D v3 install path:
     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v3
     Parameter"SetupPath"
Not there, so looking in:
     HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v3
     Parameter"AppPath"
... NOT found! ...
===========================================================

INSTALLATION FOR FSX-SE:
SetupPath="D:\Steam\steamapps\common\FSX\"
Checking version of the FSX-SE EXE:
... Version 10.0.62615.0  (Need at least 10.0.62607.0)
Checking compatibility with installed SimConnect:
    Found SimConnect build 60905 (Original)
    Found SimConnect build 61242 (SP1 May07)
Checking if there's already a version of FSUIPC4 installed in:
       D:\Steam\steamapps\common\FSX\Modules\FSUIPC4.DLL
... Version 4.962 found.
FSX-SE Modules folder already exists.
Okay -- installed FSUIPC4 into "D:\Steam\steamapps\common\FSX\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path: 
... found as "C:\Users\Ronnie\AppData\Roaming"
Now finding \Microsoft\FSX-SE\FSX_SE.CFG for all users, including this one
Looking in "C:\Users\All Users\AppData\Roaming"
 ... No FSX_SE.CFG there
Looking in "C:\Users\Default\AppData\Roaming"
 ... No FSX_SE.CFG there
Looking in "C:\Users\Default User\AppData\Roaming"
 ... No FSX_SE.CFG there
Looking in "C:\Users\Public\AppData\Roaming"
 ... No FSX_SE.CFG there
Looking in "C:\Users\Ronnie\AppData\Roaming"
 ... No FSX_SE.CFG there
Looking for the current user's Application Data path: 
... found as "C:\Users\Ronnie\AppData\Roaming"
Now finding \Microsoft\FSX-SE\FSX.CFG for all users, including this one
Looking in "C:\Users\All Users\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Default\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Default User\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Public\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Ronnie\AppData\Roaming"
 ... No FSX.CFG there
Looking for the current user's Application Data path: 
... found as "C:\Users\Ronnie\AppData\Roaming"
Now finding \Microsoft\FSX\FSX.CFG for all users, including this one
Looking in "C:\Users\All Users\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Default\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Default User\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Public\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Ronnie\AppData\Roaming"
Found FSX.CFG in "C:\Users\Ronnie\AppData\Roaming\Microsoft\FSX\FSX.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC4 section.
... FSUIPC4 section already exists but will be replaced.
     (for FSUIPC4, without Loader)
... FSUIPC4 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
"Modules\FSUIPC Documents" folder already exists.
Now installing additional files into the "Modules\FSUIPC Documents" folder:
   Installed "FSUIPC4 User Guide.pdf" okay
   Installed "FSUIPC4 for Advanced Users.pdf" okay
   Installed "FSUIPC4 History.pdf" okay
   Installed "The 2016 List of FSX and P3D Controls.pdf" okay
   Installed "FSUIPC Lua Library.pdf" okay
   Installed "FSUIPC Lua Plug-Ins.pdf" okay
   Installed "Lua License.pdf" okay
   Installed "Lua Plugins for VRInsight Devices.pdf" okay
   Installed "LuaFileSystem.pdf" okay
   Installed "Example LUA plugins.zip" okay
   Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
   Installed "Offset Mapping for PMDG 737NGX.pdf" okay
   Installed "Offset Mapping for PMDG 777X.pdf" okay
   Installed "FSUIPC4 Offsets Status.pdf" okay
   Installed "Profiles in Separate Files.pdf" okay
   Installed "FSUIPC4_Loader.dll" okay
===========================================================

All installer tasks completed.
Registration dialog exit: selected  WIDEFS REGISTER
Providing WIDEFS registration dialogue ...
Registration for WideFS was successful! (result code 00)

*************** End of Install Log ***************
 

 

Link to comment
Share on other sites

26 minutes ago, Spuddy said:

 I have noticed on the forums that sometimes you require certain information from users. Below is the installer log which you might need.

The install log doesn't help, as the install is okay. You need to see if FSUIPC.DLL was ever actually loaded and run. If it was then there would be an FSUIPC4.LOG file in the FS Modules folder. If there is one then I need to see it.

I also need to see the Windows crash data, as that tells me where it crashed and why. You'll get that from the Windows application logs collected in the windows Event Viewer.

The possibilities, from previous experience, include corrupted Weather files (.WX and wxstationlist.bin) and an out of date BGLMANX.DLL loading before hand. if you use anything from DreamTeam, like GSX and their sceneries, try downloading and running the latest AddOn Manager to make sure it is all up to date.

Pete

BTW ALWAYS POST SUPPORT QUESTIONS TO THE SUPPORT FORUM, i.e. here. You posted it to the reference subforum, FAQ. You are lucky I saw it.

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.