Bigsky10

Thank so much Dick

I am going to add P3D V5 to my new computer. My question is: can I use my Module file FSUIPC 4.dll from my FSX FSUIPC 4 or do I have to rebuild all of my aircraft profiles?

Pete, FYI. After battling with this problem for a while I used the help you gave me and some information from Saitek. I went to their question and answer page and found three files they indicated to use to solve problems with Saitek controllers. After I ran them to reset game controller in registry I took one of the A/C I was having trouble with. After I recalibrated in FSUIPC4 the axes, key strokes and buttons seem to work OK. My profiles appear to be working OK. Thanks so much for you help with this. Dick Saitek - Clear Calibration - Pro Flight Rudder Pedals.zip Saitek - Clear Calibration - Pro Flight Throttle Quadrant (USB).zip Saitek - Clear Calibration - Pro Flight Yoke System.zip

Pete, I’m still having some problems with the throttle working erratically even after calibration. I uninstalled the drivers and programs connected to them. I did not unplug the controller before I rebooted and let windows put game controller drivers in. I disabled joystick in FSX and am using FSUIPC4 only. I have recalibrated all three controllers in FSUIPC4. Now when I go into FSX the throttle levers work fine but the Prop levers and Mixture levers when activating them one lever moved farther down than the other. Until just a week or two ago all my settings, profiles and controllers work perfectly. I am not sure if a windows update caused the problem or not. I think my next step would be to delete the . ini and rebuild all profiles. A question I have, is there any registry entries that would mess up the calibration process. I did order a T6Q throttle with USB plugin. I was going to wait until I get it before starting all over. I also thought of deleting FSX and reinstalling it. There is something someplace that is causing a conflict with the controllers. I am not at a point where I can install P3D. Not sure my computer will handle it. Maybe a starting system for P3D. Any ideas you might have I will give them a try. I am not a expert in computers but do know a few things. Thank Dick FSX Deluxe Edition SP1 and SP2, Win 7 Home Premium SP1, Intel Core i5 CPU 750 @ 2.67 GHz 2.66 GHz,10 GB RAM, 64-bit Operating System, NVIDIA GeForce GTX 745 4MB Ram

Thanks. will do. Dick

I did a little test today on a couple A/C I have in FSX. Everything seems to works great. I do have to rebuild one profile but that isn't bad. I still have Saitek Drivers installed but no Saitek software. All joystick actions are deleted from FSX except POV hat. If I still have problems I will uninstall drivers and let windows put them in. Qustion? Would drivers have effect on throttle levers moving smooth with no jerky movement. I think it is hardware it self. Thanks again for help. Dick FSUIPC4_prev.log FSUIPC4.log

T hank Pete for all the help. I'm going to follow your advice and disable drivers. Going to stat up sim and load up a profile and test it out. I'll let you know what happens. Throttle quadrants are getting old so may have to think about changing them out. I am looking at Pro Flight TQ6 throttles. Thanks again Dick

Pete, her is the Joyscan file. I am thinking of deleting the ini and starting all over. I went through the controller assignments in FSX last night and deleted all the joy stick assignments except for the "POV Hat". Haven't done anything else so far. The Saitek PRO Flight Yoke System still shows as unknown device in the control/hardware and sound/devices and printers. I downloaded the lates drivers but going to saitek to see if there is another driver to substitute. Thanks Dick FSUIPC4.JoyScan.csv

I checked this morning and found no rudder peddles in the ini file. I might have changed a usb port on the rudders. I am not sure how to change the registry joystick ID thought. I did power changes. Thank Dick FSUIPC4.ini

I had to reload one of my addon A/C today (twin otter extended). After reinstalling the throttle controls started to jump all around. I recalibrated to the the game controllers in both FSX and the game device. Still not reacting at all. When I went into the ini file the saitek rudder peddles: [JoyNames] AutoAssignLetters=No 1=Flight Yoke System 1.GUID={12E39840-D089-11E4-8001-444553540000} 2=Saitek Pro Flight Throttle Quadrant 2.GUID={634041D0-D089-11E4-8001-444553540000} where no longer assigned. They do show on the game controller and in FSX. I have reset FSX config file and still does not work. At this point I am going to uninstall FSUIPC and FSX and start all over again. I have attached last logs for your review thinking for sure you may see something. I have had game controller for 5 years or more so sure there could be a problem there. I know throttle pots are dirty and worn. Any help with uninstall or pointers would be greatly appreciated. Thanks Dick FSUIPC4_prev.log FSUIPC4.log FSUIPC4.ini

Thanks working great now Dick

Tried one other thing which I think fixed it. Ran FSX and excepted new DLL. Now ini in module shows version 4.974. I guess just didn't complete install process. Thanks Dick

I downloaded version 4.974 and installed it as administrator. I used registration key to finalize install. FSUIPC4 install shows everything is installed. I saved the log which shows "Version 4.974 found. Installed version is later: it is not overwritten. " INI still shows UpdatedByVersion=4972a. I have included these files. I rebooted computer to let changes take place. Thanks Dick FSUIPC4 Install.log Log.LOG FSUIPC4.ini

Thanks Pete, Downloading current version now Dick

Hi all, I am currently using FSUIPC4 UpdatedByVersion=4972a. My USB devices are starting to work intermittent. Especially my keyboard. The question I have is is I unhook them and replace them what am I going to have to do with my configuration settings. Will FSUIPC4 find the new devices and recognize the profiles I have built or will I have to start over and build new profiles. Thanks Dick FSX Deluxe Edition SP1 and SP2, Win 7 Home Premium SP1, Intel Core i5 CPU 750 @ 2.67 GHz 2.66 GHz,10 GB RAM, 64-bit Operating System, NVIDIA GeForce GTX 745 4MB Ram FSUIPC4.ini