BPCY

All I can do is apologise profusely, it was an honest mistake. BPCY

Apologies Pete I didn't mean to upset you, I was only describing what I was experiencing. I have attached a screenshot for what I was seeing. As you can see I didn't see any links. Thomas has sent a link which shows the updates, thanks and I have realised that I was clicking on the downloads link for the SimFlight Network forums. Sorry for the Naivety! I am hoping to download later tonight and print out the user guide to read the setup etc. Thanks BPCY FSUIPC Download screenshot.docx

Hi Pete, Sorry but I'm not quite sure what you meaning here. I clicked in downloads link on this site above and it was said there were no downloads available. I then tried schratti site and sim market and could not find 4.974 When I downloaded from Simmarket I selected 2 f0r 1 (with Wide FS) offer. This downloaded 4.972 I am just asking where I can get 4.974 from as I cannot find it on either the downloads site here on the Scritti.com/Dowson or on Simmarket sites. Thanks BPCY

Hi Pete, The downloads does not have any files at the moment and in http://www.schiratti.com/dowson.html there is no 4.974 and if I click the SimMarket FSUIPC4 for FSX and P3D (where I bought FSUIPC4 from) its not there either. Thanks BPCY

Oh sorry so its in the FSX Modules folder - Sorry I have an impatient teenager rushing me! I'm used to the old fsx where I just plug in and go with the yoke & throttles. Its my son who wants the dual throttles but does not want to do any work to set it up! Where can I get 4.974 for fsx and p3d? Can I just install the new version or do I need to uninstall 4.972 first? Do I need to pay again? Thanks BPCY

Hi Peter, Apologies but there was no User Guide that came with the install. The files in the directory are: FSUIPC 4.972 Changes.pdf FSUIPC4 Install.log FSUIPC4.zip Install FSUIPC4.exe Installing and Registering FSUIPC4.pdf I selected FSUIPC4 because I have FSX Steam and P3d and the option suggested this was best if you had both. where can I get the user manual? Thanks BPCY

Hi Pete, Thanks but I'm a newbie. I setup everything I think to create a profile PDMG and set it to "send direct to FSUIPC setup" on the Axis tab. I then move the flap lever (setup on the right lever of the ps2 throttle quadrant) and it say joy# 2 Y Axis H but all the delta in and out are -12223 but I cannot find a REV on screen. What should I be setting? Thanks Bpcy

really struggling to get Spoilers and flaps configured with PDMG 737NGX on MS FSX Steam addition with two Saitek throttle quadrants. Seems to set them in the reverse direction. When I move flap fully up it registers on screen as fully up and as I move flap down it moves wrong way. Same with Spoiler. Any idea what I'm doing wrong? Thanks BPCY

Can't get this to work with Spoiler and Flaps axis control

Managed to get some readings from 2nd throttle but the left hand lever of the 2nd throttle (PS2) is turning the ailerons and I cannot get it be Throttle 2 on 2 engines BPCY

Hi, Any luck with reading what I have done wrong. Thanks BPCY

fsuipc4 install.log FSUIPC4 Install.log

fsuipc4joyscan.csv FSUIPC4.JoyScan.csv

Well I did have a CD and installed it and it was running fine with one Throttle set. Control and devices is picking the switches and levers up as when I went it the properties as per last post etc. I don't have FSUIPC5 I have FSUIPC4 as that's what simmarket said was for both FSX steam and p3d Uploading only log file created Thanks BPCY FSUIPC4 Install.log

I'm not quite sure what you mean. I have previously been running with just the Saitek Yoke and 1 Saitek throttle successfully. I am only now trying to get a 2nd throttle running because my son wants it to look more authentic. I personally am new to Flight sim world. Thanks BPCY

Hi Thomas, Yes, Inside Game Contoller it shows Saitek Pro Flight Rudder Pedals OK Saitek Pro Flight Throttle Quadrant OK Saitek Pro Flight Yoke OK I selected the Throttle and properties button and a graph is shown. I moved the PS2 Throttle and it moves on the X-axis. middle lever moves Y-Axis and right lever moves Z axis Also all buttons work in Reversers section The Left Saitek throttle set works in the Saitek Yoke properties with the left lever on the Z Axis, middle lever on X Rotation and right lever on the Y rotation and each button on left thrtle works on Toggles section 15 - 20. Variuos buttons on the yoke work ok as well. So how do I map these into FSUIPC application? Thanks for your help BPCY

Thanks Thomas I will try tomorrow night. Bpcy

Thanks Thomas I will check the Windows Gamecontroller Settings for Windows 10 tomorrow. Do I just move the 2nd Throttle (PS2) throttle/mixture levers etc and Win 10 should pick up? Thanks BPCY

Hi, Thanks for answering. I believe Windows 10 can see these. How do I check? Thanks for your help BPCY

Hi, This is my first time on the site so please forgive us. I have tried searching for a solution first but a suggested one of installing Joyid did not work. My son and I have recently started within Flight Sim community (he wants to be a Commercial Pilot) and I have bought the Saitek Stack (Yoke, Two Throttle Quadrants and Radio, Switch stack) Now, I have also bought the PDMG 737 previously for FSX and today the FSUIPC (ver 4.72) & WideFS. I have tried to configure the Throttle stack by looking at youtube FSUIPC videos etc We have both FSX-Steam and Prepar3d (bought in Nov 2017) and would like to eventually run aircraft in both with the same Saitek Yoke & Throttles etc. We want to be able to set the Throttle quadrants to run the PDMG 737 aircraft initially. 1) 1rst Throttle quadrant has a USB connection 2) 2nd Throttle quadrant has a PS2 connection which connects into the Saitek Yoke Now the problem is that when in FSUIPC we can see all the lever axis settings for Throttle 1 (USB) but not Throttle 2 (PS/2). Anyone have any steps or video that we can use to setup. Or even a configuration file we can use. Many Thanks for your help BPCY