vvince

thanks for your guidance Pete, it's all sorted out now. Cheers Vvince

Hi Pete, Thanks, but I still do not get it : I do not see any assignment lines referring to A, B, C or E in the [Axes] or [Buttons ] sections, so I do not know what to delete. [JoyNames] AutoAssignLetters=No Q=Saitek Pro Flight Quadrant Q.GUID={ED58DE70-A175-11E8-8001-444553540000} J=Joystick - HOTAS Warthog J.GUID={B6D1D180-5B64-11E6-8008-444553540000} R=Flight Control Rudder R.GUID={8D1028B0-1FA9-11E7-8001-444553540000} N=F16 MFD 2 N.GUID={B6D35820-5B64-11E6-800A-444553540000} T=Throttle - HOTAS Warthog T.GUID={B6D1D180-5B64-11E6-8007-444553540000} M=F16 MFD 1 M.GUID={B6D35820-5B64-11E6-800B-444553540000} W=Saitek Pro Flight Cessna Trim Wheel W.GUID={ED1EE8B0-A133-11E8-8001-444553540000} 0=Saitek Pro Flight Quadrant 0.GUID={ED58DE70-A175-11E8-8001-444553540000} 1=Joystick - HOTAS Warthog 1.GUID={B6D1D180-5B64-11E6-8008-444553540000} 2=Flight Control Rudder 2.GUID={8D1028B0-1FA9-11E7-8001-444553540000} 5=Saitek Pro Flight Cessna Trim Wheel 5.GUID={ED1EE8B0-A133-11E8-8001-444553540000} 4=Throttle - HOTAS Warthog 4.GUID={B6D1D180-5B64-11E6-8007-444553540000} 3=F16 MFD 2 3.GUID={B6D35820-5B64-11E6-800A-444553540000} 6=F16 MFD 1 6.GUID={B6D35820-5B64-11E6-800B-444553540000} B=<< MISSING JOYSTICK >> << MISSING JOYSTICK >> C=<< MISSING JOYSTICK >> << MISSING JOYSTICK >> E=<< MISSING JOYSTICK >> << MISSING JOYSTICK >> A=<< MISSING JOYSTICK >> [Axes] PollInterval=10 RangeRepeatRate=10 0=BX,256,D,1,0,0,0 -{ DIRECT: Aileron }- 1=BY,256,D,2,0,0,0 -{ DIRECT: Elevator }- 2=CX,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 3=CY,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 4=CR,256,D,3,0,0,0 -{ DIRECT: Rudder }- 5=EY,256,F,66994,0,0,0 -{ TO SIM: AXIS_ZOOM }- 6=EZ,256,D,10,0,0,0 -{ DIRECT: Throttle2 }- 7=ER,256,D,9,0,0,0 -{ DIRECT: Throttle1 }- 8=ES,256,D,21,0,0,0 -{ DIRECT: ElevatorTrim }- [Buttons] PollInterval=25 ButtonRepeat=20,10 1=RB,32,C65607,0 -{ELEV_TRIM_DN}- 2=RB,36,C65615,0 -{ELEV_TRIM_UP}- 3=RB,34,C66277,0 -{AILERON_TRIM_RIGHT}- 4=RB,38,C66276,0 -{AILERON_TRIM_LEFT}- 5=PE,22,C65758,0 -{FLAPS_INCR}- 6=PE,21,C65759,0 -{FLAPS_DECR}- 7=PE,20,C65570,0 -{GEAR_TOGGLE}- 8=PE,7,C66064,0 -{SPOILERS_ON}- 9=PE,6,C66065,0 -{SPOILERS_OFF}- 10=PB,2,C3,0 -{Custom control: <3>}- 11=PB,4,C66541,0 -{TOGGLE_TAILWHEEL_LOCK}- 12=RE,32,C65734,0 -{PAN_UP}- 13=RE,36,C65735,0 -{PAN_DOWN}- 14=RE,34,C65672,0 -{PAN_RIGHT}- 15=RE,38,C65671,0 -{PAN_LEFT}- 16=PE,10,C65759,0 -{FLAPS_DECR}- 17=PE,25,C66391,0 -{TOGGLE_TAIL_HOOK_HANDLE}- 18=PE,11,C65758,0 -{FLAPS_INCR}- 19=PT,11,C65758,0 -{FLAPS_INCR}- 20=PT,10,C65759,0 -{FLAPS_DECR}- Also similarly, for my second point, I do not see neither reference to a Joystick name in the airplane profiles. Here is an example with the VRS FA18 (the one with the most buttons assigned...) The buttons first: [Profile.VRS_FA!8] 1=VFA-143 "Pukin' Dogs" Line [Buttons.VRS_FA!8] 0=P6,15,K49,8 -{Key press: 1}- 1=P6,16,K50,8 -{Key press: 2}- 2=P6,17,K51,8 -{Key press: 3}- 3=P6,18,K52,8 -{Key press: 4}- 4=P6,0,K54,8 -{Key press: 6}- 5=P6,1,K55,8 -{Key press: 7}- 6=P6,2,K56,8 -{Key press: 8}- 7=P6,3,K56,8 -{Key press: 8}- 8=P6,4,K48,8 -{Key press: 0}- 9=P6,5,K49,10 -{Key press: ctl+1}- 10=P6,6,K50,10 -{Key press: ctl+2}- 11=P6,7,K51,10 -{Key press: ctl+3}- 12=P6,8,K52,10 -{Key press: ctl+4}- 13=P6,9,K53,10 -{Key press: ctl+5}- 14=P6,10,K54,10 -{Key press: ctl+6}- 15=P6,11,K55,10 -{Key press: ctl+7}- 16=P6,12,K56,10 -{Key press: ctl+8}- 17=P6,13,K57,10 -{Key press: ctl+9}- 18=P6,14,K48,10 -{Key press: ctl+0}- 19=P1,10,K38,10 -{Key press: ctl+Up}- 20=P1,12,K40,10 -{Key press: ctl+Down}- 21=P1,13,K37,10 -{Key press: ctl+Left}- 22=P1,11,K39,10 -{Key press: ctl+Right}- 23=P1,16,K49,11 -{Key press: ctl+shft+1}- 24=P1,17,K50,11 -{Key press: ctl+shft+2}- 25=P1,14,K51,11 -{Key press: ctl+shft+3}- 26=P1,15,K52,11 -{Key press: ctl+shft+4}- 28=P1,2,K46,9 -{Key press: shft+Del}- 30=P1,3,K46,8 -{Key press: Del}- 31=P1,6,K13,8 -{Key press: Rtn}- 32=P1,8,K46,9 -{Key press: shft+Del}- 35=P1,4,K90,11 -{Key press: ctl+shft+Z}- 36=R4,32,K38,9 -{Key press: shft+Up}- 37=R4,36,K40,9 -{Key press: shft+Down}- 38=R4,34,K39,9 -{Key press: shft+Right}- 39=R4,38,K37,9 -{Key press: shft+Left}- 40=P4,0,K13,8 -{Key press: Rtn}- 41=R4,3,K67,8 -{Key press: C}- 42=R4,5,K70,8 -{Key press: F}- 45=P4,14,K85,10 -{Key press: ctl+U}- 46=P4,10,K82,10 -{Key press: ctl+R}- 47=P6,19,K53,8 -{Key press: 5}- 48=P3,15,K49,8 -{Key press: 1}- 49=P3,16,K50,8 -{Key press: 2}- 50=P3,17,K51,8 -{Key press: 3}- 51=P3,18,K52,8 -{Key press: 4}- 52=P3,19,K53,8 -{Key press: 5}- 53=P3,0,K54,8 -{Key press: 6}- 54=P3,1,K55,8 -{Key press: 7}- 55=P3,2,K56,8 -{Key press: 8}- 56=P3,3,K57,8 -{Key press: 9}- 57=P3,4,K48,8 -{Key press: 0}- 58=P3,5,K49,10 -{Key press: ctl+1}- 59=P3,6,K50,10 -{Key press: ctl+2}- 60=P3,7,K51,10 -{Key press: ctl+3}- 61=P3,8,K52,10 -{Key press: ctl+4}- 62=P3,9,K53,10 -{Key press: ctl+5}- 63=P3,10,K54,10 -{Key press: ctl+6}- 64=P3,11,K55,10 -{Key press: ctl+7}- 65=P3,12,K56,10 -{Key press: ctl+8}- 66=P3,13,K57,10 -{Key press: ctl+9}- 67=P3,14,K48,10 -{Key press: ctl+0}- 68=P4,1,K69,8 -{Key press: E}- and the axis [Axes.VRS_FA!8] RangeRepeatRate=10 0=1X,256,D,1,0,0,0 -{ DIRECT: Aileron }- 1=1Y,256,D,2,0,0,0 -{ DIRECT: Elevator }- 2=2X,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 3=2Y,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 4=2R,256,D,3,0,0,0 -{ DIRECT: Rudder }- 5=4X,256 6=4X,BR,-16384,-6586,1071,39 -{ Entering=key press/hold: Right }- 7=4X,BR,6336,16383,1071,37 -{ Entering=key press/hold: Left }- 8=4Y,256 9=4Y,BR,-16384,-6265,1070,40 -{ Entering=key press & release: Down }- 10=4Y,BR,6368,16383,1070,38 -{ Entering=key press & release: Up }- 11=4Z,256,D,10,0,0,0 -{ DIRECT: Throttle2 }- 12=4R,256,D,9,0,0,0 -{ DIRECT: Throttle1 }- 13=4S,256 14=4S,BR,5952,16383,1071,65574 -{ Entering=key press/hold: Up }- 15=4S,BR,-16384,-6971,1070,65576 -{ Entering=key press & release: Down }- What should I edit in order to have these bindings assigned to the device T and J (throttle and joystick Thrustmaster). Obviously there are some things I am missing. Thanks, Vvince

Thanks a lot Pete, the problem is solved. I edited the .ini file, and manually assigned Joy names (so I left AutoAssignLetters=No). But two things are still bothering me : before doing manual naming, I tried AutoAssignLetters=Yes (which did not work : the wheel was still unseen). And now I have some A, B, C, E names with << MISSING JOYSTICK >> entries, not assigned anymore. If I delete these entries they keep coming back and I could not find out what should be edited where to free these names again. A second thing : in the operation of renaming the controllers, all the axis and key binding have been lost, although they are still present in the .ini file. Is there a way to edit the .ini file such that the renamed controller get their assignment back in FSUIPC (without re assigning everyuthing manually of course). Thanks again, cheers Vvince PS : by the way, the upload limit is a bit low : 20kB... I had to delete the former uploads to be able to upload the 16kB FSUIPC.ini FSUIPC5.ini

First only the trim wheel (Saitek Cesna pro) was seen by FSUIPC 5.14 and not the throttle quadrant (none of the three axis, and none of the buttons of the quadrant neither). I changed the USB connections to the PC, and now only the throttle quadrant is recognized (all three axis and the buttons), the trim wheel not anymore... All other axis (thrustmaster warthog throttle + joystick) are properly scanned and successfully assigned Basically I see the same as described in this post only-1-of-2-throttle-quads-recognized (except I have 1 trim wheel + 1 throttle quadrant instead of 2 throttle quadrants) Both trim and throttle modules are seen by P3DV4 in the control options and are properly functioning when assigned. So at the moment I have the throttle assigned in FSUIPC and the trim in the control options of P3DV4, but that's not very satisfactory since the trim wheel settings will be the same for all airplanes. Thanks for help. Vvince