cleonard

Good evening, Pete. Here is the conclusion of the malfunction: I totally erased all the files P3D, cleaned the disk and reinstalled P3D then FSUIPC. No more anomaly found. This was a file corruption during a bad uninstall - reinstall operation. Thanks again for your analysis. It brings me a lot of experience back. Best regards.

Okay, Pete, I tried with the new elements that you had the kindness to transmit to me. Nothing helps. Thank you very much for your help. I will reinstall P3D the week next Monday and keep you informed, of course. Christophe.

The bug began when I tried to upgrade totally from P3D V4.3 to V4.4. I first thought that the problem was a bad cohabitation between the two simulators. (two different FS + FSUIPC into different directories "programfilex86" / "programfiles" but same disk). At the end I uninstalled all and only reinstalled P3DV4 and all planes & sceneries. I did it twice before asking some help. Probably not all files have been deleted. inside "Appdata>roaming>LM" I find "Prepar3D v3" directory. I delete it. inside "Prepar3D v4" directory I can't find any wx file I just can see "logbook" with bin type. I find weather.cfg Inside programdata folder. I think it doesn't matter. deleted all wx files Inside documents directory I send you files Deleted these add-ons into dll.xml damn, in spite of that there is no change. I'm starting to think that I have to format disk and reinstall sim rather than waste time on you… Possible next week if you agree. Christophe. files.zip

Just to notice : I never type a command or key called "ATC menu close" and Don't know were it comes from . Christophe

My apologies for not having read your lines closely enough. OK, let's go… Nice to feel hope ! 1- I send you a copy of "dll.xml" from appdata folder and from programdata folder + "Controls List for P3D4 Build 27077.txt" 2- I rename Prepar3D v4 Add-ons. Inside I can see "addon scenery" (some VFR freeware scenery) and "Orbx ObjectFlow 2" (which allows Orbx scenery to display dynamic content). 3- I change parameters Inside FSUIPC.ini (timeforselect, debug) 4- Tried a new test and zip all files you can look at... For information: my niche next week to put me on my simulator is just Tuesday night (business trip then a few days). Best regards. Christophe. dll_into appdata folder.xml dll_into programdata folder.xml Controls List for P3D4 Build 27077.zip FSUIPC5.zip

I just noticed a new point, when selecting FSUIPC option "extras miscellany" : 138015 LogOptions changed, now 60000000 0000001D 138250 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 141453 KEYDOWN: VK=71, Waiting=0, Repeat=N, Shifts=0 141453 .. Key not programmed -- passed on to FS 141453 *** EVENT: Cntrl= 65570 (0x00010022), Param= 0 (0x00000000) GEAR_TOGGLE 141500 KEYUP: VK=71, Waiting=0 142984 Button changed: bRef=0, Joy=2, Btn=0, Pressed 142984 [Buttons] 3=P2,0,C65570,0 142984 FS Control Sent: Ctrl=65570, Param=0 GEAR_TOGGLE 142984 Exception 1 "ERROR", Ref 2805, Index param 2 on TransmitClientEvent, object=2, id=65570 (GEAR_TOGGLE), data=0 143140 Button changed: bRef=0, Joy=2, Btn=0, Released 156765 Button changed: bRef=0, Joy=2, Btn=18, Pressed 156765 [Buttons] 2=P2,18,C66079,0 156765 FS Control Sent: Ctrl=66079, Param=0 GEAR_UP 156765 Exception 1 "ERROR", Ref 2818, Index param 2 on TransmitClientEvent, object=2, id=66079 (GEAR_UP), data=0 157031 Button changed: bRef=0, Joy=2, Btn=18, Released 157500 Button changed: bRef=0, Joy=2, Btn=19, Pressed 157500 [Buttons] 1=P2,19,C66080,1 157500 FS Control Sent: Ctrl=66080, Param=1 GEAR_DOWN 157500 Exception 1 "ERROR", Ref 2820, Index param 2 on TransmitClientEvent, object=2, id=66080 (GEAR_DOWN), data=1 157578 Button changed: bRef=0, Joy=2, Btn=19, Released 163781 *** EVENT: Cntrl= 65732 (0x000100c4), Param= 0 (0x00000000) EXIT The problem may be visible in this "exception" message...

This is FSUIPC config : [General] UpdatedByVersion=5150 History=8XKEO6VG332XGHR38MEZ2 InitDelayDevicesToo=No PMDG737offsets=Auto PMDG747offsets=Auto PMDG777offsets=Auto Annotate=Yes UseSystemTime=No UseMidMouseBtn=Yes MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 RestoreSimcWindows=No FixMachSpeedBug=No AutoScanDevices=Yes DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes EnableMouseLook=No DelayedMouseLookZoom=No WideLuaGlobals=Yes AxesWrongRange=No TCASid=Flight TCASrange=40,3 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No ThreadAffinityMask=x0 LuaAffinityMask=x0 InitDelay=0 GetNearestAirports=Yes LogOptionProtect=Yes TimeForLuaClosing=2 WeatherReadFactor=2 WeatherRewriteSeconds=1 TrafficStallTime=1 InitialStallTime=10 NormalStallTime=1 LuaRerunDelay=66 ComReadLoopTime=20 ControlsListBuild=27077 Console=No ConsoleWindow=100,220,869,744 DebugLua=Yes LogWrites=Yes LogReads=Yes LogEvents=Yes LogLua=Yes LogButtonsKeys=Yes FSVersionUsed="Lockheed Martin® Prepar3D® v4",4.4.16.27077 SimConnectUsed=4.4.0.0 [Traffic Limiter] AirportPreference=50 PlannedAirportsPreference=50 GroundPreference=50 NearerPreference=50 TargetFrameRate=0 TrafficLimit=0 [JoyNames] AutoAssignLetters=No 0=Mad Catz Pro Flight Rudder Pedals 0.GUID={4FF8ED00-A42F-11E5-8007-444553540000} 2=Flight Yoke System 2.GUID={50D17D40-A430-11E5-8001-444553540000} [JoystickCalibration] RudderBlendLowest=1 AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 [Axes] PollInterval=10 RangeRepeatRate=10 0=2X,256,F,65763,0,0,0 -{ TO SIM: AXIS_AILERONS_SET }- 1=2Z,256,F,65765,0,0,0 -{ TO SIM: AXIS_THROTTLE_SET }- [LuaFiles] [Buttons] PollInterval=25 ButtonRepeat=20,10 1=P2,19,C66080,1 -{GEAR_DOWN}- 2=P2,18,C66079,0 -{GEAR_UP}- 3=P2,0,C65570,0 -{GEAR_TOGGLE}- [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No [GPSout2] GPSoutEnabled=No [WideServer] WideFSenabled=Yes AdvertiseService=1 Port=8002 Port2=9002 [Sounds] Path=E:\Program Files\Lockheed Martin\Prepar3D v4\Sound\ Device1=Périphérique audio principal Device2=SAMSUNG-0 (NVIDIA High Definition Audio) Device3=PROJECTORS-C (NVIDIA High Definition Audio) Device4=Realtek Digital Output (Realtek High Definition Audio) Device5=Haut-parleurs (5- Philips SHG7980) Device6=Haut-parleurs (4- Philips SHG7980) [Monitor] Display=1 [ClientNames] 1=FLIGHTSIM2

This is the second part... in text... 71250 KEYDOWN: VK=113, Waiting=0, Repeat=N, Shifts=0 71250 .. Key not programmed -- passed on to FS 71266 *** EVENT: Cntrl= 66851 (0x00010523), Param= 0 (0x00000000) VIEW_CAMERA_SELECT_1 71360 KEYUP: VK=113, Waiting=0 73594 KEYDOWN: VK=112, Waiting=0, Repeat=N, Shifts=0 73594 .. Key not programmed -- passed on to FS 73594 *** EVENT: Cntrl= 66860 (0x0001052c), Param= 0 (0x00000000) VIEW_CAMERA_SELECT_0 73688 KEYUP: VK=112, Waiting=0 74485 KEYDOWN: VK=114, Waiting=0, Repeat=N, Shifts=0 74485 .. Key not programmed -- passed on to FS 74485 *** EVENT: Cntrl= 66852 (0x00010524), Param= 0 (0x00000000) VIEW_CAMERA_SELECT_2 74594 KEYUP: VK=114, Waiting=0 78703 KEYDOWN: VK=115, Waiting=0, Repeat=N, Shifts=0 78703 .. Key not programmed -- passed on to FS 78703 *** EVENT: Cntrl= 66853 (0x00010525), Param= 0 (0x00000000) VIEW_CAMERA_SELECT_3 78813 KEYUP: VK=115, Waiting=0 84110 KEYDOWN: VK=68, Waiting=0, Repeat=N, Shifts=0 84110 .. Key not programmed -- passed on to FS 84110 *** EVENT: Cntrl= 66389 (0x00010355), Param= 0 (0x00000000) TOGGLE_AIRCRAFT_EXIT 84110 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE 84110 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE 84391 KEYDOWN: VK=51, Waiting=0, Repeat=N, Shifts=0 84391 .. Key not programmed -- passed on to FS 84391 *** EVENT: Cntrl= 65540 (0x00010004), Param= 0 (0x00000000) SELECT_3 84688 KEYUP: VK=51, Waiting=0 84781 KEYUP: VK=68, Waiting=0 85235 KEYDOWN: VK=68, Waiting=0, Repeat=N, Shifts=0 85235 .. Key not programmed -- passed on to FS 85235 *** EVENT: Cntrl= 66389 (0x00010355), Param= 0 (0x00000000) TOGGLE_AIRCRAFT_EXIT 85235 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE 85235 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE 85625 KEYDOWN: VK=52, Waiting=0, Repeat=N, Shifts=0 85625 .. Key not programmed -- passed on to FS 85625 *** EVENT: Cntrl= 65541 (0x00010005), Param= 0 (0x00000000) SELECT_4 85844 KEYUP: VK=52, Waiting=0 85891 KEYUP: VK=68, Waiting=0 94953 KEYDOWN: VK=68, Waiting=0, Repeat=N, Shifts=0 94953 .. Key not programmed -- passed on to FS 94953 *** EVENT: Cntrl= 66389 (0x00010355), Param= 0 (0x00000000) TOGGLE_AIRCRAFT_EXIT 94953 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE 94953 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE 95047 KEYUP: VK=68, Waiting=0 99500 KEYDOWN: VK=68, Waiting=0, Repeat=N, Shifts=0 99500 .. Key not programmed -- passed on to FS 99500 *** EVENT: Cntrl= 66389 (0x00010355), Param= 0 (0x00000000) TOGGLE_AIRCRAFT_EXIT 99500 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE 99500 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE 99985 KEYDOWN: VK=68, Waiting=0, Repeat=Y, Shifts=0 99985 .. Key not programmed -- passed on to FS 99985 *** EVENT: Cntrl= 66389 (0x00010355), Param= 0 (0x00000000) TOGGLE_AIRCRAFT_EXIT 99985 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE 99985 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE 100000 KEYDOWN: VK=50, Waiting=0, Repeat=N, Shifts=0 100000 .. Key not programmed -- passed on to FS 100000 *** EVENT: Cntrl= 65539 (0x00010003), Param= 0 (0x00000000) SELECT_2 100281 KEYUP: VK=50, Waiting=0 100297 KEYUP: VK=68, Waiting=0 103235 KEYDOWN: VK=68, Waiting=0, Repeat=N, Shifts=0 103235 .. Key not programmed -- passed on to FS 103235 *** EVENT: Cntrl= 66389 (0x00010355), Param= 0 (0x00000000) TOGGLE_AIRCRAFT_EXIT 103235 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE 103235 *** EVENT: Cntrl= 66514 (0x000103d2), Param= 0 (0x00000000) ATC_MENU_CLOSE 103563 KEYDOWN: VK=51, Waiting=0, Repeat=N, Shifts=0 103563 .. Key not programmed -- passed on to FS 103563 *** EVENT: Cntrl= 65540 (0x00010004), Param= 0 (0x00000000) SELECT_3 103860 KEYUP: VK=51, Waiting=0 103860 KEYUP: VK=68, Waiting=0 109110 Button changed: bRef=0, Joy=2, Btn=0, Pressed 109110 [Buttons] 3=P2,0,C65570,0 109110 FS Control Sent: Ctrl=65570, Param=0 GEAR_TOGGLE 109422 Button changed: bRef=0, Joy=2, Btn=0, Released 109625 Button changed: bRef=0, Joy=2, Btn=0, Pressed 109625 [Buttons] 3=P2,0,C65570,0 109625 FS Control Sent: Ctrl=65570, Param=0 GEAR_TOGGLE 109766 Button changed: bRef=0, Joy=2, Btn=0, Released 110031 Button changed: bRef=0, Joy=2, Btn=0, Pressed 110031 [Buttons] 3=P2,0,C65570,0 110031 FS Control Sent: Ctrl=65570, Param=0 GEAR_TOGGLE 110188 Button changed: bRef=0, Joy=2, Btn=0, Released 110719 KEYDOWN: VK=115, Waiting=0, Repeat=N, Shifts=0 110719 .. Key not programmed -- passed on to FS 110719 *** EVENT: Cntrl= 66853 (0x00010525), Param= 0 (0x00000000) VIEW_CAMERA_SELECT_3 110766 KEYUP: VK=115, Waiting=0 110953 KEYDOWN: VK=113, Waiting=0, Repeat=N, Shifts=0 110953 .. Key not programmed -- passed on to FS 110969 *** EVENT: Cntrl= 66851 (0x00010523), Param= 0 (0x00000000) VIEW_CAMERA_SELECT_1 111063 KEYUP: VK=113, Waiting=0 111703 Button changed: bRef=0, Joy=2, Btn=0, Pressed 111703 [Buttons] 3=P2,0,C65570,0 111703 FS Control Sent: Ctrl=65570, Param=0 GEAR_TOGGLE 111922 Button changed: bRef=0, Joy=2, Btn=0, Released 112360 Button changed: bRef=0, Joy=2, Btn=0, Pressed 112360 [Buttons] 3=P2,0,C65570,0 112360 FS Control Sent: Ctrl=65570, Param=0 GEAR_TOGGLE 112516 Button changed: bRef=0, Joy=2, Btn=0, Released 112656 Button changed: bRef=0, Joy=2, Btn=0, Pressed 112656 [Buttons] 3=P2,0,C65570,0 112656 FS Control Sent: Ctrl=65570, Param=0 GEAR_TOGGLE 112781 Button changed: bRef=0, Joy=2, Btn=0, Released 113672 Button changed: bRef=0, Joy=2, Btn=18, Pressed 113672 [Buttons] 2=P2,18,C66079,0 113672 FS Control Sent: Ctrl=66079, Param=0 GEAR_UP 113969 Button changed: bRef=0, Joy=2, Btn=18, Released 114328 Button changed: bRef=0, Joy=2, Btn=19, Pressed 114328 [Buttons] 1=P2,19,C66080,1 114328 FS Control Sent: Ctrl=66080, Param=1 GEAR_DOWN 114453 Button changed: bRef=0, Joy=2, Btn=19, Released 114516 Button changed: bRef=0, Joy=2, Btn=19, Pressed 114516 [Buttons] 1=P2,19,C66080,1 114516 FS Control Sent: Ctrl=66080, Param=1 GEAR_DOWN 114594 Button changed: bRef=0, Joy=2, Btn=19, Released 118203 *** EVENT: Cntrl= 65732 (0x000100c4), Param= 0 (0x00000000) EXIT 118313 Sim stopped: average frame rate for last 70 secs = 70.5 fps 118313 Max AI traffic was 0 aircraft 119547 === Closing session: waiting for DLLStop to be called ... 129500 === DLLStop called ... 129500 === Closing external processes we started ... 130500 === About to kill any Lua plug-ins still running ... 130641 === Closing global Lua thread 131656 === About to kill my timers ... 131860 === Restoring window procs ... 131860 === Unloading libraries ... 131860 === stopping other threads ... 131860 === ... Button scanning ... 131953 === ... Axis scanning ... 132063 === Releasing joystick devices ... 132063 === Freeing macro memory 132063 === Removing any offset overrides 132063 === Closing all WideFS threads 133406 === Clearing any displays left 133406 === NOTE: not calling SimConnect_Close ... 133406 === AI slots deleted! 133406 === Freeing button memory ... 133406 === Deleting wxstationlist.bin file ... 133406 === Closing my Windows ... 133406 === Freeing FS libraries ... 134406 === Closing devices ... 134406 === Closing the Log ... Bye Bye! ... 134406 System time = 03/02/2019 11:37:21, Simulator time = 11:36:20 (10:36Z) 134406 *** FSUIPC log file being closed Minimum frame rate was 50.8 fps, Maximum was 91.4 fps Average frame rate for running time of 70 secs = 70.5 fps Maximum AI traffic for session was 0 aircraft Memory managed: 34 Allocs, 33 Freed ********* FSUIPC Log file closed ***********

Good mornig Pete, Following your advice I checked that Linda was totally erased from the program. I think the config is clean now. However the problem persists and I still do not see anything in the log that could explain it to me. This is the last files of the new test... I deleted many messages into log file because size limit is 10kb into forum. Deleted hundreds of this : 52735 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW 52813 *** EVENT: Cntrl= 66837 (0x00010515), Param= 0 (0x00000000) PRESSURIZATION_PRESSURE_ALT_DEC I do not know the origin of this pressure_alt_dec event. This is the first part... FSUIPC5.1.log

Ok Pete. I will try tomorow to retrieve the first log file and compress it. When i tried to send it this afternoon it was rejected by forum (too big). It's 1.25 am at the moment. Good night and everyone sleeps in my house... best regards Christophe

Hello Pete, Thanks a lot for your answer. I will take time to repair P3D and deinstall every file i'll have to. 1- About the crossed lines : I wrote my message initially into the Notepad. Sorry for the mistake : the copy-paste was not correct. You were well advised to read the text anyway. 2- About lua HIDswitch : It was a test to scan the status of the buttons on Saitek pro flight switch panel. This program provided by Linda team is intended to Watch the 3360 offset values (saitek switches panel adress, as they say) and look at "FS window" changes according to the position of the buttons. In fact, I can see0x0000 only, without any change. I gave up this point. 3- As I said into my message, i totally reinstall P3D before sending my help message to you. That is the Reason why i've got only gear button assignment. It's a test. I did a try again following your advice and I also uninstalled all modules (LINDA, ASN, GSX). The test is negative. When assigned in P3D, gear is controlled. When removed in P3D and setted in FSUIPC, nothing happens. 4- doors : just curious. No assignment first. Just "D" key is setted into P3D controls (doors - select). If I press D1, D2, D3 etc... I just open/close main door (idem with many planes even carenado window with graphic commande of copilot or Passenger door). If I remove FSUIPC. all door control returns to normal. I can't explain that. What I just tried : GSX + SODE + ASconnect & ASN for P3DV4 removal, CCleaner for registry cleaning, Nothing happens. I totally empty my "modules" folder and removed FSUIPC : all doors controls are avalaible again. I reinstalled FSUIPC (restore from and try controls from distant PC with "FS FLIGHT CONTROL external software (instructor post using simconnect). aicraft controls are working normally (all exit doors open and gear toggle). 5- You'd like to look at my log file. I really hope that we'll find together what happens with FSUIPC. With thanks for reading my very academic English coming from french scool. Best regards. Christophe FSUIPC5.log

Hello Pete, This is the first time I can not properly operate your module in 10 years of use. I can not find the problem. 1. I recently uninstalled P3DV3 and fully installed P3DV4 on another hard drive. Everything works well. I can use widefs with planG on my remote PC for example. But when FSUIPC is present in the directory "modules", I can not open the doors of my A320 anymore (same for all planes), even with the keyboard and controls at the MCDU. Only the main door works. I also lost the operation of the auto-start engine right and left on the 2 buttons of my throttle (saitek yoke system). Same for gear toggle : Yoke button works fine only with a direct assignment into P3D. In fact, when installed, FSUIPC perfectly recognizes the button but nothing happens, while it works on the keyboard or P3D controls assignment. And worse, about the cargo door problem, I ask myself about many controls totally locked with their offsets invisibly forced. FSUIPC and wideFS are Registered (with an old mail adress, but it doesn't mind I hope) and installed as administrator with Windows defender disabled (not sure at each test). Joystick assignment is Inside P3D... I didn't tried with FSUIPC: Perhaps I would. Of course all the drivers are upgraded. My fps average is up than 80. 2. Here is all the files you probably need for a diagnostic. But everything seems to be correct. 3. I've noticed for exemple (Gear) : offset 3360 has no effect when tried with the LINDA console or FSUIPC button affected to FScontrol: Watching new offset: 3360:UB:DEC = 0 btn 06A30D670-1=00000000000001000010>>>00000000000001000001 rl: 06A30D670-1=00000000000001000010>>>00000000000001000001 bit 19 2 pr: 06A30D670-1=00000000000001000010>>>00000000000001000001 bit 20 [EVNT] OnPress Button detected PR:06A30D670:20 ++++++++ [hHID] Button OnPress 06A30D670_20/G: 0 [hHID] Button Repeat Cancel 06A30D670_20/nil ***** [hHID] Button Repeat Cancel 06A30D670_20/nil ***** [hHID] Button Repeat Cancel 06A30D670_20/nil ***** [hHID] Action unshifted 06A30D670/20 press call: nil [hHID] Button Execute 06A30D670/Gears_down btn 06A30D670-1=00000000000001000001>>>00000000000001000010 pr: 06A30D670-1=00000000000001000001>>>00000000000001000010 bit 19 rl: 06A30D670-1=00000000000001000001>>>00000000000001000010 bit 20 2 [EVNT] OnPress Button detected PR:06A30D670:19 ++++++++ [hHID] Button OnPress 06A30D670_19/G: 0 [hHID] Button Repeat Cancel 06A30D670_19/nil ***** [hHID] Button Repeat Cancel 06A30D670_19/nil ***** [hHID] Button Repeat Cancel 06A30D670_19/nil ***** [hHID] Action unshifted 06A30D670/19 press call: nil [hHID] Button Execute 06A30D670/Gears_up And Inside FSUIPC log I can read : 1482360 Button changed: bRef=0, Joy=2, Btn=19, Pressed 1482360 [Buttons] 1=P2,19,C65570,0 1482360 FS Control Sent: Ctrl=65570, Param=0 GEAR_TOGGLE 1482703 Button changed: bRef=0, Joy=2, Btn=19, Released Best regards. Christophe LEONARD (LFRC) FSUIPC5.ini FSUIPC5 Install.log