Onno Reitsma
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by Onno Reitsma
-
-
Many thanks John for the very speedy advice !
I tried it out and yes it now works !
Strangely enough for me I still read the same error message in the log file, but as all seems now to work properly I will not ask for further explanations: this forum is not a sw course !!
kind regards
Onno
-
Dear Peter
After having read so many positive comments I could not resist to try it out (basically for me to operate separate commands for gear up and gear down).
FSUIPC 5 was already installed on my PC probably when I installed an add on some months ago. But not registered.
At that time an ini file was produced. Attached later on.
I have de- installed that version by renaming the folder.I run Prepar3d version 4.2.21.24048 (Simconnectversion 4-2.0.0)
on a Windows PC with Intel® core ™i7-6700 CPU@ Ghz 3.40Ghz 3.41Ghz 16.0 GB RAM .
It runs under Windows 10: 64 Bit, x64 based processor .I use the Thrustmaster Hotas Whartog as controls.
The following add ons are listed under options
-
Orbx Object flow
-
A2A
-
EDDK Cologne Bonn airport.
Since two day I am registered as well to have access to all options. I have re installed the Module folder but it now has no ini folder (?) The menu on Prepar3d confirms that everything is there. And the pdf documents are all there under Module, but not the ini file. .
I have initially programmed some buttons and that works fine (have confirmed with ok) . If I select another aircraft the assigned functions do not work.
Once I leave Prepar3d settings are gone.
Neither am I able to select profiles.
I have checked the original FSUIPC 5 ini file (in a renamed Folder) but the “UseProfiles=Yes” entry to set profiles is not there.
Enclosed find the last installation log and the original ini file
In the log file these lines may explain the problem: “ Looking in "C:\Users\Public\AppData\Roaming"
... No Prepar3D.CFG there
Attempt to set the ACL entries for Modules access permissions failed, error = 1332 “I checked and I found the prepar3D.cfg file here: “C:\Users\Onnor\AppData\Roaming\Lockheed Martin\Prepar3D v4”
As a beginner I might have messed up things. I would be very happy if you find the time to give some guidance.
Regards
Onno Reitsma
-
Initial ini file:
[General]
UpdatedByVersion=5150
History=0WIID5UE72UBOMUIZ2WHJ
AxesWrongRange=No
TCASid=Flight
TCASrange=40,3
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
ThreadAffinityMask=x0
LuaAffinityMask=x0
InitDelay=0
GetNearestAirports=No
LogOptionProtect=Yes
TimeForLuaClosing=2
WeatherReadFactor=2
WeatherRewriteSeconds=1
TrafficStallTime=1
InitialStallTime=10
NormalStallTime=1
LuaRerunDelay=66
ComReadLoopTime=20
FSVersionUsed="Lockheed Martin® Prepar3D® v4",4.2.21.24048
SimConnectUsed=4.2.0.0
ControlsListBuild=24048
Console=No
[WideServer]
WideFSenabled=Yes
---------------------------------------------------------------------------------
2) Last log file:
Installer for FSUIPC5.DLL version 5.151
Looking in registry for Prepar3D v4 install path:
HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v4
Parameter"AppPath"
... >>> OK! FOUND Prepar3D v4! <<< ...
AppPath=C:\Program Files\Lockheed Martin\Prepar3D v4\
===========================================================
INSTALLATION FOR Prepar3D v4:
AppPath="C:\Program Files\Lockheed Martin\Prepar3D v4\"
Checking version of the Prepar3D v4 EXE:
... Version 4.2.21.24048 (Need at least 4.1.0.0)
Checking if there's already a version of FSUIPC5 installed as:
C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\FSUIPC5.DLL
... No previous valid version found.
Prepar3D v4 Modules folder created okay!
Okay -- installed FSUIPC5 into "C:\Program Files\Lockheed Martin\Prepar3D v4\Modules\FSUIPC5.DLL"
Looking for the current user's Application Data path:
... found as "C:\Users\Onnor\AppData\Roaming"
Now finding \Lockheed Martin\Prepar3D v4\Prepar3D.CFG for all users, including this one
Looking in "C:\Users\All Users\AppData\Roaming"
... No Prepar3D.CFG there
Looking in "C:\Users\Default\AppData\Roaming"
... No Prepar3D.CFG there
Looking in "C:\Users\Default User\AppData\Roaming"
... No Prepar3D.CFG there
Looking in "C:\Users\Onnor\AppData\Roaming"
Found Prepar3D.CFG in "C:\Users\Onnor\AppData\Roaming\Lockheed Martin\Prepar3D v4\Prepar3D.CFG"
Now checking DLL.XML ...
... There is a previous DLL.XML, checking for FSUIPC5 section.
... FSUIPC5 section already exists but will be replaced.
... FSUIPC5 section of DLL.XML written okay
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
Looking in "C:\Users\Public\AppData\Roaming"
... No Prepar3D.CFG there
Attempt to set the ACL entries for Modules access permissions failed, error = 1332
"Modules\FSUIPC Documents" folder created okay!
Removed "FSUIPC4 Offsets Status.pdf" okay
Now installing additional files into the "Modules\FSUIPC Documents" folder:
Installed "FSUIPC5 User Guide.pdf" okay
Installed "FSUIPC5 for Advanced Users.pdf" okay
Installed "The 2016 List of FSX and P3D Controls.pdf" okay
Installed "FSUIPC Lua Library.pdf" okay
Installed "FSUIPC Lua Plug-Ins.pdf" okay
Installed "Lua License.pdf" okay
Installed "LuaFileSystem.pdf" okay
Installed "Example LUA plugins.zip" okay
Installed "FSUIPC5 Offsets Status.pdf" okay
Installed "Profiles in Separate Files.pdf" okay
Installed "FSUIPC5 History.pdf" okay
Installed "Lua Plugins for VRInsight Devices.pdf" okay
Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay
Installed "Offset Mapping for PMDG 737NGX.pdf" okay
Installed "Offset Mapping for PMDG 777X.pdf" okay
Installed "Offset Mapping for PMDG 747QOTSII.pdf" okay
===========================================================
All installer tasks completed.
Registration dialog exit: selected FSUIPC REGISTER
Providing FSUIPC registration dialogue ...
Registration for FSUIPC5 was successful! (result code 00)
*************** End of Install Log ***************
-
set the ACL entries for Modules access permissions failed, error = 1332
in FSUIPC Support Pete Dowson Modules
Posted
What a wonderful service, you are providing.
I read what you are writing and can somewhat-ish follow the logic!
Am now completely assured that my set up is ok!
The next time I need to re-install Prepare3d, I will do what you advice!.
Many Thanks
Onno Reitsma