Jump to content
The simFlight Network Forums

Herb

Members
  • Posts

    46
  • Joined

  • Last visited

Everything posted by Herb

  1. Hello Pete! I see, Eytan Don't use any Compound Entries. I do and Joe Skittles was my Teacher. Saitek Joystick Mode 3 position wheel, won't work if not the entry I show is Disabled. After my Windos 10 update, I had No compound Buttons working. A new Saitek Driver Install, will not work, because of a New entry in Win System 32 causing the problem. This is for Compound user only who like to use the Mode-wheel. I wish you a very nice Summer. Greetings from Canada. Herb
  2. Hello! I had a Win 10 pro update last night. Today Problems with FSUIPC compound buttons not working. Saitek Flight-control sluggish. Control Properties in window check all OK. Finally it click tome: Saitek entries in Windows System 32. You have to delete or mark Backup on this entry: SaiD075pr0 See my screenshot. Is the last entry under the Saitek entrties. your number maybe different. I got my Saitek back to work. Herb
  3. Hello Pete! Thank you very much for your kindness and help. I have it all nicely working again, Joystick, Compound buttons and more. About my Memory: April 1. I will turn 90 years. My Flightsim and my Yamaha Keyboard playing keep me going, but my wife does a lot for me too to stay healthy. Keep care, frendly greetings from Canada. Herb
  4. Hello Pete! I did uninstalled my FSX-SE and deleted every things for FSX. I did a new install, FSUIPC is working, but won't except my serial number.My e-mail address changed and I did forget the on when I got FSUIPC some time ago. My New E-mail is: herb_k@sympatico.ca. Can you help me please. Best Regards Herb full name: Herbert Krosta
  5. Thank you Pete for your answer, I deleted the FSX cfg file and let a new one build. Got now around 1800 Mb Herb
  6. FSX windows 7 all uninstalled and Registry cleaned,(I have dual-boot) New install FSX-SE to Windows 10 also ORBX Pacific North latest Library, Central v3 and FSUIPC. I chose a small airport as default Bowerman KHQM Washington state. My Cessna show VAS: 726640 at start-up. I like to know: If the vas-number showing is ok, or should be much higher. I do NOT blame the module, Pete does a nice work, it's me or my new install. Attach a screen-shot. any help? Herb
  7. Pete! The aero patch is only for windows 7 home basic and starter because they dont have personalization panel and aero glass effect. I have ORBX Nord west and Nord america scenery, aerosoft Dutch Harbor X and their airbus series. Made a flight with default Cessna, No problem was reported. I will update fsuipc to the new version now. Thank you very much for your reply. Herb
  8. Hello Pete! I did not used the sim for awhile, but I have problem with the PMDG MD11. It is not out of memory. I see some error in fsuipc log. User Addr. to be=herb_k@sympatico.ca Error also at the end of this file. [Programs] (Run1=HIDE,"F:\Microsoft Flight Simulator X\FSX\Aero.bat"} this one is fixed now FSX entry before Aero.bat deleted. Could you point me kindly what is wrong and how to fix it? Best Regards Herb ********* FSUIPC4, Version 4.929 by Pete Dowson ********* Reading options from "F:\Microsoft Flight Simulator X\Modules\FSUIPC4.ini" Running inside FSX on Windows 7 Module base=678F0000 User Name="Herbert Krosta" User Addr="herb@sympatico.ca" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 203 System time = 08/10/2015 17:57:56 203 FLT path = "C:\Users\Herbie\Local Settings\Documents\Flight Simulator X Files\" 234 Trying to connect to SimConnect Acc/SP2 Oct07 ... 234 FS path = "F:\Microsoft Flight Simulator X\" 483 FSUIPC couldn't run: "F:\Microsoft Flight Simulator X\FSX\Aero.bat" [Error=267] 483 LogOptions=00000000 00000001 483 SIM1 Frictions access gained 483 Wind smoothing fix is fully installed 483 G3D.DLL fix attempt installed ok 483 SimConnect_Open succeeded: waiting to check version okay 483 Trying to use SimConnect Acc/SP2 Oct07 483 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 483 Initialising SimConnect data requests now 483 FSUIPC Menu entry added 515 F:\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT 515 F:\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 733 Monitor IPC:024C (U32) = 0 2231 Monitor IPC:024C (U32) = 3471132 12215 Monitor IPC:024C (U32) = 3470964 18845 F:\Microsoft Flight Simulator X\SimObjects\Airplanes\PMDG_MD11\MD-11.AIR 18845 C:\Users\Herbie\Local Settings\Documents\Flight Simulator X Files\KSEAKSFO01.PLN 18845 Weather Mode now = Theme 18845 c:\users\herbie\local settings\documents\flight simulator x files\Previous Flight.FLT 22324 Monitor IPC:024C (U32) = 2980640 30997 System time = 08/10/2015 17:58:26, Simulator time = 16:05:19 (23:05Z) 30997 Aircraft="PMDG MD-11 KLM Royal Dutch Airlines" 32276 Monitor IPC:024C (U32) = 2699524 35381 Starting everything now ... 36551 Advanced Weather Interface Enabled 42292 Monitor IPC:024C (U32) = 2785780 52354 Monitor IPC:024C (U32) = 2784480 62416 Monitor IPC:024C (U32) = 2742600 72525 Monitor IPC:024C (U32) = 2736496 cut-out ---------------------------------------------- 2340389 Monitor IPC:024C (U32) = 2252044 2350404 Monitor IPC:024C (U32) = 2255480 2353072 Sim stopped: average frame rate for last 2320 secs = 25.5 fps 2360716 Monitor IPC:024C (U32) = 2370460 2420730 Monitor IPC:024C (U32) = 2330188 2430776 Monitor IPC:024C (U32) = 2328284 2440791 Monitor IPC:024C (U32) = 2321628 2460869 Monitor IPC:024C (U32) = 2311992 2470884 Monitor IPC:024C (U32) = 2296548 2480899 Monitor IPC:024C (U32) = 2297572 2490961 Monitor IPC:024C (U32) = 2294264 2500945 Monitor IPC:024C (U32) = 2293240 2510961 Monitor IPC:024C (U32) = 2276256 2520976 Monitor IPC:024C (U32) = 2277564 2531007 Monitor IPC:024C (U32) = 2276768 2541038 Monitor IPC:024C (U32) = 2278924 2551037 Monitor IPC:024C (U32) = 2278132 2561084 Monitor IPC:024C (U32) = 2273452 2571146 Monitor IPC:024C (U32) = 2270716 2581161 Monitor IPC:024C (U32) = 2278924 2591208 Monitor IPC:024C (U32) = 2277556 2601238 Monitor IPC:024C (U32) = 2270716 2611254 Monitor IPC:024C (U32) = 2249624 2621269 Monitor IPC:024C (U32) = 2214312 2631300 Monitor IPC:024C (U32) = 2210612 2641315 Monitor IPC:024C (U32) = 2207364 2651330 Monitor IPC:024C (U32) = 2208052 2661346 Monitor IPC:024C (U32) = 2213068 2671408 Monitor IPC:024C (U32) = 2210332 2681454 Monitor IPC:024C (U32) = 2209760 2691485 Monitor IPC:024C (U32) = 2207020 2701500 Monitor IPC:024C (U32) = 2188184 2711516 Monitor IPC:024C (U32) = 2163212 2721546 Monitor IPC:024C (U32) = 2163724 2731562 Monitor IPC:024C (U32) = 2162352 2741624 Monitor IPC:024C (U32) = 2158780 2751670 Monitor IPC:024C (U32) = 2149724 2761685 Monitor IPC:024C (U32) = 2149604 2781763 Monitor IPC:024C (U32) = 2105968 2791825 Monitor IPC:024C (U32) = 2110592 2801856 Monitor IPC:024C (U32) = 2125140 2811902 Monitor IPC:024C (U32) = 2124116 2821917 Monitor IPC:024C (U32) = 2101232 2831980 Monitor IPC:024C (U32) = 2102256 2841995 Monitor IPC:024C (U32) = 2115936 2852010 Monitor IPC:024C (U32) = 2122776 2862025 Monitor IPC:024C (U32) = 2121752 2869279 ***ERROR C0000005 at 070349D0 MonitorValues (Base 5, Offset 0000, Addr 67C72E74) 2869279 *** Access violation trying to read address 097BFFF8 2869279 *** EAX 097DE508 EBX 097DE4F8 ECX 097C0000 EDX 00000008 EDI 010146A8 ESI 097DE500
  9. Pete! I'm very sorry, made at typo, I updated to v.4.827 last night. I'm a Dumkopf. I fixed the 4 entries and no more problems. I did copied the rest now and all is working fine. Thanks again, you helped me saving many hours of work. Herb
  10. Hello Pete! Thank you for your reply and advice to swap A and B. On my 2nd reply I stated that I updated to v.4.27 last night, but it did not changed anything. I know, you do dislike if we are using older version. Thanks again and I will be OK. Herb
  11. Yes, I see, but this was working before on my old system. From 11 start a new sequence. Pete explained it some time before. I change it now, did not helped. Herb What I notice the Joystick assignment is now reversed. But, this should not make any different to the Buttons numbers. Here is the old one: [JoyNames] AutoAssignLetters=Yes 1=Saitek Pro Flight Rudder Pedals 1.GUID={23313DE0-C80B-11E0-800B-444553540000} A=Saitek X52 Flight Controller B=Saitek Pro Flight Rudder Pedals B.GUID={23313DE0-C80B-11E0-800B-444553540000} C=<< MISSING JOYSTICK >> J=<< MISSING JOYSTICK >> 0=Saitek X52 Flight Controller 0.GUID={23313DE0-C80B-11E0-800A-444553540000} If this is the problem, How do I correct it? Herb I updated to FSUIPC v.4.27 No changes
  12. New Mobo, processor, ram and video installed. FSX on a internal seperate Hardrive. FSUIPC v.4.8 new installed and registered. Run:WIN7/64bits as before. Use same hardrives, a new window 7 was created and the previous was renamed to windows.old Problem: when I copy and past from my former FSUIPC Ini-file the [Profile.Piston] entry, it won't work. I did made a new Profile, same name, for the [Profile.Piston] 1=Cessna Skyhawk 172SP Paint1. I can make new assignments, but if I copy and past from my former saved Ini-file, Those Buttons are not responding from my Saitek Joystick. It look like a security problem, but I can't lay my hands on. Any help? Herb Snippet of Ini-file: ShortAircraftNameOk=No UseProfiles=Yes EnableMouseLook=No AxesWrongRange=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 LuaRerunDelay=66 Console=No FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0 SimConnectUsed=10.0.61259.0 [JoyNames] AutoAssignLetters=Yes 0=Saitek Pro Flight Rudder Pedals 0.GUID={AB57C550-9A9B-11E1-8001-444553540000} 1=Saitek X52 Flight Controller 1.GUID={2E827200-9BCC-11E1-8001-444553540000} A=Saitek Pro Flight Rudder Pedals B=Saitek X52 Flight Controller A.GUID={AB57C550-9A9B-11E1-8001-444553540000} B.GUID={2E827200-9BCC-11E1-8001-444553540000} [Profile.Piston] 1=Cessna Skyhawk 172SP Paint1 2=Mooney Bravo [buttons.Piston] 0=PA,8,C66079,0 ;//Gear Up 1=PA,9,C66080,0 ;// Gear Down 2=PA,31,C65564,0 ;//ATC 4=CP(+A,23)A,2,C65725,0 ;//Autopilot Hold ;//Mode1,Btn#2 5=CP(+A,23)A,3,C65811,0 ;//Autopilot Nav Hold On ;//Mode2 Btn#3 6=CP(+A,23)A,19,K50,9 ;//2D RadioStack-Panel (Cessna);//Mode1 7=CP(+A,23)A,20,K51,9 ;//2D GPS-Unit (Cessna) 8=CP(+A,23)A,21,K52,9 ;//2D Throttle-Unit (Cessna) 9=CP(+A,23)A,22,K53,9 ;//2D 11=CP(+A,24)A,2,C65724,0 ;//Autopilot App ;//Mode2 12=CP(+A,24)A,3,C65726,0 ;//Autopilot Alt Hold 13=CP(+A,24)A,19,K54,9 ;//2D Throttle Quadrant (Beech-Baron);//Mode2 14=CP(+A,24)A,20,K55,9 ;//2D Electric Switches Beech-Baron) 15=CP(+A,24)A,21,K56,9 ;//2D Backup Instruments (Beech-Baron) 16=CP(+A,24)A,22,K57,9 ;//2D Landing/Gear,Trims (Beech-Baron) 17=CR(+A,25)A,2,C65892,0 ;//Autopilot AP_ALT_VAR_INC ;//Mode3 18=CR(+A,25)A,3,C65893,0 ;//Autopilot AP_ALT_VAR_DEC 19=CR(+A,25)A,19,C65775,0 ;//2D Throttle-Unit Mixture DECR (Beech-Baron);//Mode3 20=CR(+A,25)A,21,C65777,0 ;//2D Mixture INCR (Beech-Baron) 21=CR(+A,25)A,20,C65771,0 ;//2D Throttle-Unit Prop-Pitch DECR (Beech-Baron);//Mode3 22=CR(+A,25)A,22,C65769,0 ;//2D Prop Pitch INCR 23=PA,10,C65759,0 ;// Flaps 24=PA,11,C65758,0 25=PA,12,K87,10 ;// Water-Rudder 26=PA,13,K71,9 ;//Tailwheel-lock on/off 27=PA,28,C66653,0 ;//VIEW_COCKPIT_FORWARD 28=PA,14,C65567,0 ;//View-Mode-Trigger //0=PB,11,C65758,0 //1=PB,10,C65759,0 Those are the new 4 entries, they did worked. I unabled for testing. //2=PB,8,C66079,0 //3=PB,9,C66080,0
  13. Hello Loubrou! It was posted before, here is what you have to do. WIN7/64bit I got. Go to Window/system32 open the folder and look for: SaiD075Cpr0 delete it or remove it. (your # maybe a little differend) leave all other saitek entries alone. Now you got the mode wheele showing as Button 23,24,25. on my joystick. I use it for compound buttons setting in FSUIPC.ini-file. Hope this helps you. Herb
  14. Thank You Gypsy for posting this. It really works, got the mode-wheel and some other buttons working now. See attachment. This Has to stay open, Now I'm loading FSX WIN7/64bit. Herb I would like to add more Info: In the windows/System32 folder there are Saitek .dll files the last one (under Saitek) is named: SaiD075C.pr0 You have to remove this line and Restart your computer. This will give you the 3 Modes + some other buttons. No need to run the Saitek Flight-Control Window in the back any more. Herb
  15. ----------------------------------------------------------------------------------------------------------------------------- Thank you Pete, I will follow your instructions. Herb To:Andy! Sorry for my mistake with the attachment. Herb
  16. Hello! I loaded the Cessna Skyhawk 172SP into FSX/ win7/64bit OS. Then open FSUIPC, checked the checkbox but nothing showed up, No dropdown-box. I did as instructed as below: To load an existing user profile you can select a pre-existing profile from the axis assignment tab, button assignment tab, or any other applicable tab where a “Profile Specific” checkbox is so as to select a profile from the dropdown box once it opens. -------------------------------------------------------------------------------------------------------------- Attached my Ini-file. Any Help? HerbFSUIPC4.txt
  17. Hello Pete! Thank you very much for the clarification for myself. Herb
  18. Hello Pete! I did assign Elevator trim in FSUIPC Option and Settings to Joystick button #2-up and #3-down send to FS, but in FS Settings-Control window, it show as button 3 and 4, also under Keyboard Column, is a Num7 and Num1-- should there a entry at all? This part, I do not understand, when assign with FSUIPC is there a new entry in FS-setting-control window created? Herb
  19. Hello Pete! I'm trying to setup Sludges (Dream-Team) FA/18 Plane for Carrier Landings. This is a FS Stock plane Modified, new Hud Meatball and more. I like to operate Axis, Button & Switches from my Joystick for easy operation. I almost got it. Thank you for your help. Herb
  20. Hello Pete! I added Ruder-pedals with toe-break L&R. with the latest driver for Win7/64 bit and Calibrate, assign to FSUIPC registered version. Why would the Elevator trim Show up under the rudder entry in FSX, also the Landing-Gear? Those Buttons are on my Joystick. See Attachment 2&3 please. I did read your documents in the last week again, but I don't understand all of it yet, please be patient. Do I have to clear (delete)all keys in FS Settings-Control when using FSUIPC? Below a Snipped of the Ini-file. Herb [JoyNames] AutoAssignLetters=No 0=Saitek X52 Flight Controller 0.GUID={F01F4E20-D31D-11DF-8001-444553540000} 1=Saitek Pro Flight Rudder Pedals 1.GUID={435E3090-D933-11DF-8001-444553540000} [buttons] ButtonRepeat=20,10 EliminateTransients=Yes pollinterval=50 1=P0,8,C66079,0 2=P0,10,C65759,0 3=P0,11,C65758,0 4=P0,2,C65683,0 5=P0,3,C65615,0 6=P0,9,C66080,0 10=P0,20,K32,9 11=P0,19,K85,9 12=P0,21,K73,9 13=P0,22,K81,9 14=P0,29,K80,8 15=P0,15,C66653,0 16=P0,16,C65676,0 17=P0,18,C65680,0 18=P0,17,C65679,0 19=P0,6,C66654,0 20=P0,5,K80,9 22=P0,7,K49,9 23=P0,32,C66415,0 24=P0,34,C65672,0 25=P0,36,C65735,0 26=P0,38,C65671,0 [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-14006,-418,0,16383 Elevator=-16126,0,192,15584 Throttle=-16384,16383 Spoilers=-16380,16380/16 LeftBrake=-15360,16119/16 RightBrake=-15872,15062/16 Rudder=-12900,-3032,256,15552 [Axes] 0=0X,1,D,0,1,0,0 1=0Y,1,D,0,2,0,0 2=0Z,256,D,0,0,0,4 3=0S,256,D,22,0,0,0 4=1X,256,D,7,0,0,0 5=1Y,256,D,8,0,0,0 6=1R,256,D,3,0,0,0 [sounds] Path=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Sound\ Device1=Primary Sound Driver Device2=Speakers (High Definition Audio Device) Device3=Digital Audio (S/PDIF) (High Definition Audio Device) Device4=Headphones (High Definition Audio Device) Device5=Digital Audio (S/PDIF) (High Definition Audio Device) Device6=S/PDIF (M-Audio Delta Audiophile) Device7=Line 1/2 (M-Audio Delta Audiophile) [Profile.Joystick] 1=Sludge FX F/A-18A 416 FLTS/NASA [Keys.Joystick] 1=75,11,66882,0 [buttons.Joystick] 0=P0,12,K75,11 [Monitor] Display=3
  21. Hello! What button-press FSUIPC or FSX keyboard buttons, will bring-up the Cockpit view when in VC (virtual Cockpit)? Anybody knows? Herb /-------------------------------------------------------------------------------------- Got it now, set-up my 2nd 8-way hat switch with FSUIPC of course. I ask this question before: I Deleted all axis assignment in FSX. Do I have to do the same in the FSX Button+Switches section for the buttons I do assign to FSUIPC? Herb
  22. I set-up Joystick and Throttle for the FA/18 Hornet. In line 14=P0,29,K80,8 This is the P button. How can I assign Shift only to the Pinkie-trigger on the Joystick? So that I can shift with Pinkie and push other Buttons. In this case, I would have Push-back and pause on one button. This is my first try to set Buttons with FSUIPC. I have the SST Saitek Software too. But,fsuipc is much better with my Axis and buttons. I Deleted all axis assignment in FSX. Do I have to do the same in the FSX Button+Switches section for the buttons I do assign to FSUIPC? Herb
  23. Hello Pete! I put a little input on the 3 axis just for taking the screen-shot. I did set the sliders as per instruction and added Stick sensitivity mode=0. I will get Saitech Rudder Pedals, need analog Break for the F18. breaking with the trigger on the joystick don't work so good, It's on or off, nothing in between. There is a speed-break, I use this too. I should be fine now. Thank you for taking your time. Regards Herb
  24. Thank you Pete! I did joint the FS-dream-team flying Carrier Landing with Mr.Sludges F18 plane. with Fsx setting, I had a bad time lining-up, over controlling. With fsuipc, I do have a much better controlled flight. I wrote about this in their forum. Thanks again, best Regards. Herb
  25. Hello Pete! Please don't come down to hard on me, I think I did followed your instruction. I found in FSX control axis elevator sliders where off and reverse was ticked. I fixed those errors. About setting (Calibration) the axis in fsuipc: After setting the left Set-Button it will show reset and 3 new set button will show. next going to right lower corner, relax a little and press In-set button,next center joystick and press Center Set. (Question: once or twice? Here I did only once.) Next Forwards most upper left corner, relax a little and press Max-set button. My Fsuipc show zeros under the left reset-buttons when the joystick is centered. Here I have a little input on all 3 Axis. Aileron, Elevator, Rudder. Next: Do I have to assign now the 3 Axis under axis-assignment? Herb
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.