Pilot1801

Hi John, thank you for quick reply. Admin privileges was not the problem. In the meantime I have contacted OC. The solution was an update to SIOC v8. Christoph

Hi, I have got a similar topic regarding connection FSUIPC7 and SIOC V6. Yesterday, I installed FSUIPC7 (7.3.15) When I run FSUIPC7 (w/o MSFS) and SIOC w/ FSUIPC enabled in SIOC_config file I encounter a problem: SIOC states: - FSUIPC status: ok - no FSUIPC version recognized - no IOCP Server Port and Host address recognized. Result: no access to connected modules and cards. When I run SIOC w/FSUIPC disabled in SIOC_config file there is no problem (FSUIPC still running). I am also running SIOC V6 with FSUIPC4 & 5 and there is no problem. Do you know about any issues regarding FSUIPC7 and SIOC? Christoph

I want to assign the RZ axis of the T.16000M sidestick instead of rudder pedals (which I do not have) using fsuipc5 within P3Dv4 (by the way -same behaviour in FSX with fsuipc4). I disabled all controllers in P3Dv4. The values while assigning jump from -16383, 0 to 16383 and there is no continuous transition. I only get these 3 values i.e there ist just full deflection or zero. If I assign the RZ axis w/o fsuipc just using P3D then everything works. Windows based calibration is fine as well which means there is no hardware defect of the sidestick. Any suggestions for solving the problem are welcome. Thanks Christoph

That's it! Thank you very much Roman for this brilliant idea! I have flashed the Bodnar cards with two different .bin# files and did the test again. Great! Unplugging the devices is not a good idea - but due to cirstumstances I cannot avoid it in any case. Anyway, I got deeper insight in this topic now. Have a nice weekend and thank you all again for great help! Christoph 141 Product= BU0836A 1 141 Manufacturer= Leo Bodnar 141 Serial Number= Bu15CF 141 Vendor=1DD2, Product=2241 (Version 1.38) 141 GUIDs returned for product: VID_1DD2&PID_2241: 141 GUID= {29A47F80-51BC-11EB-8002-444553540000} 141 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R4095,U0,V0,X0,Y0,Z4095 141 Product= BU0836A 2 141 Manufacturer= Leo Bodnar 141 Serial Number= Bl11BD 141 Vendor=1DD2, Product=2242 (Version 1.38) 141 GUIDs returned for product: VID_1DD2&PID_2242: 141 GUID= {FA168CB0-51BE-11EB-8002-444553540000} 141 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X4095,Y4095,Z0

This is what I did two days before; Interchanging the letters E and C in the ini File. And it worked. But that is of course very clumsy ....- by the way: the CRJ is not valid (I didn't achieve changing it). The others should work. There must be a problem wih the Bodnar devices (all others are working) - my saitek yoke got damaged and I repaired by by inserting a Bodnar card. It worked. Then I added a further Bodnar card to the saitek throttle (with PS/2 connector, which I removed). But that is different story. It worked - but no problems came up as described. Now I did another test. Just connecting the Yoke or the TQ2 separately. Result: Both have got the GUID= {AE7CFEC0-0B18-11EB-8002-444553540000} Christoph

Thank you for quick response - first of all I updated to 4.795a. This is very strange! If I reconnect the device (test 4 based on v4.795, s. attm.) then everything works fine. BUT: I did remove and reconnect the 2nd TQ - not the yoke - for sure! There are two bodnar devices: Yoke: E.GUID={AE7CFEC0-0B18-11EB-8002-444553540000} 2nd TQ: C.GUID={A74ECFB0-3F6C-11EB-8002-444553540000} Of course, if "C" is assigned to the axis elevator and aileron, it will not work - but what happened? Christoph joy_names_issue.zip

Hello team, I am struggling with phenomena that devices (yokes or TQs) will not properly work after removing devices which I do not need for specific aircrafts. For example, for flying the Dash Q8 400 I need two TQs. If I now switch to a Cessna I remove one TQ and keep just one for mixture and throttles. The problem is that the remaining TQ works properly, but the yoke does no longer operate. All axis assignments and buttons are lost. Despite, the yoke GUID is recognized. Reloading of assignments does not help. For better understanding I have added all log-files and test description. Regards Christoph joy_names_issue.zip

Hi Roman, That's it! Thank you so much. Christoph

Hello Reinhard, thank you for quick answering. I am sorry, but this was only a copy and paste error in my post. In my lua script it is correct. There is still the problem with the EXT_KILL parameter. sioc is not terminated after fsx is shut down. Regards Christoph

Hello, I have got a similar problem - I launched my software from lua file with handle, error= ext.run("C:\\SIOC.exe, "EXT_KILL") Sioc starts successfully. But the Parameter "EXT_KILL" has no effect, i.e. SIOC is not terminated after closing FSX. Maybe there is a mistake in Syntax? I got error =-3. Alternatively, I tried to start sioc directly in fsuipc.ini (last update) via Run command. But this does only work for all aircrafts. I only want to start sioc for PMDG 737 aircrafts. This can only be done for Lua scripts. May be there is another option? Christoph

Hello Pete, ok - to be more precise: RESET of throttle calibration in FSUIPC was not successful in terms of it did not solve my problem. Of course, the RESET worked and I got button SET. Thank you for the re-worked script. The range from -16384 to 16383 is correct for Standard FSX Airbus! Now it works and I am able to control the lever. But unfortunately, it does not operate for the Aerosoft Airbus. Which are the parameters I have to sent via ipc.control? Christoph

Hello Pete, thank you for your quick response. Unfortunately, RESET of throttle calibration in FSUIPC was not successful. In my SIOC script values (0-255) are multiplied by 64 and sent to fsuipc offset 089A. There is no problem obviously. Now I have run the lua script with the standard FSX airbus A321: The lever in FSX jumps to "CLB". But I am not able to shift the lever continuously between IDLE and CLB. I do not right understand what happens with the parameter - let's say 2096 - after executing ipc.control. How can I get to know which is the apropriate one for controlling thrust between CLB and IDLE e.g.? Christoph

Hi, I am replying to this threat as I do not know if the problem has been solved. Anyway, I have got a similar issue: I want to control the throttle levers of Aerosoft Airbus A320 by an external device (self made homecockpit throttle quadrant) via lua script. I have already succeeded for the flap levers. But the throttles wil not operate. I have added the small lua script for testing throttle 1 and the log file. The lever position is written to offset 089A (by SIOC). This seems to work. Maybe, ipc.control number 66420 (throttle axis 1) is wrong.... Christoph Airbus_ttest.lua FSUIPC4.log