Christoph112233

Hello! I gave another try today, and it worked! - Well, almost! As you can see I got Cabin Lights now, but the first 4 windows are not illuminated, on both sides. Is that by intention? I can only get the Cabin Lights on by pressing "L", resulting in all lights turning on. Is there a way just to turn on the Cabin Lights, maybe a Key Command just for the Cabin Lights? Thank you very much for your help!

Hey guys! So maybe any suggestion how I can get the Cabin Light to work? As You can see in my previous Post, the Cabin Light is off. Otherwise the Fuselage Windows would be illuminated. Greetings!

Hello! For me, no success : / I attached an example for what the aircraft looks at night. Any suggestions how I could get the Cabin Lights to work? Thank you for your help!

Hello! Thank you, so no files are created in the Feelthere Folder (Panel States for example) by saving a Scenario via the P3D Menu, correct? These files are not a problem at all, it's all fine! I just wanted to know if additional files are created somewhere in the Feelthere Folder each time I save a Scenario via the P3D Menu. Thank you for your help, best regards!

Hello guys! When flying, I save the Scenario via the P3D Menu from time to time. After completion of the flight I delete the saved files, which are located in the P3v5 Files Folder. My question now is: Does the Feelthere Embraer v3 save additional files (for Panel States for examples) somewhere in the Feelthere? If yes, where can I find them? I want to make sure all the generated files (which are created by saving the scenario) are deleted after I completed my flight to make sure I don't have too much data on my system. Thank you for your help, much appreciated! Best regards! Yours, Christoph

Hey guys! Do you know if there's the HGS Feature modelled in the Feelthere Embraer V3? In the former version (V2) there was some shortcut if Im correct. Isn't it modelled or can't I find the right key command? Thank you for your help, best regards!

Good morning! Thank you! 🙂 Best regards!

Thank you for your support and for your patience, it worked now! 🙂 One more thing: When I use Autosave, the Files are saved in the Prepar3d v5 Files, like if I would save manually - Correct? What is the maximum time interverall for AutoSave? Thank you, best regards!

The Installer says, after entering data and pressing "Register": "Rgistration details have been validated". Then I click ok, the setup finishes and then in P3D FSUIPC says: "unregistered". In a post in April 2020 you stated: "You should then get a pop-up telling you if the registration was successful or not. If successful, a key file will be generated." Which key file? Where should it be? What to do with it? As last file, I attached a snapshot where I can chose the destination folder. Please tell me which one to take.

Hello John! Thats what I did, I installed it into Program Files - But still, no success... The sim still shows the unregistered version although I got a positive notification regarding registration.

I tried to do so. The installer worked, but without asking for register details this time. The install location I chose was C/Program Files. Any further advice please on how to get FSUIPC fully to run?

Hello John! I have FSUIPC installed in: This PC/Documents/P3Dv5 Add-Ons/FSUIPC6 The FSUIPC text folder inside the install location says: ********* FSUIPC6, Version 6.1.6 (4th November 2021) by Pete & John Dowson ********* Prepar3D.exe version = 5.2.22.27615 Running inside Prepar3D v5 Module base=7FFF959B0000 Windows 10 Home 64 Bit reported as Build 19043, Release ID: 2009 (OS 10.0) Reading options from "C:\Users\Christoph\Documents\Prepar3D v5 Add-ons\FSUIPC6\FSUIPC6.ini" Checking the Registrations now ... User Name="" User Addr="" FSUIPC6 not user registered WIDEFS7 not user registered, or expired Can you tell me how I get FSUIPC to run now? Which folder should I choose for installation? So I assume uninstall and then installing it again into the location you will hopefully provide information on? Best regards, Christoph

Hello! I just purchased from SimMarket, installed FSUIPC and registered it but inside the P3D --> FSUIPC Menu I can't see Autosave 😞 Upon installation I put in my key and I got a notification it was successfull. Any advice please?

Hello John! Thank you for the quick reply! Where and how to buy, Sir? Best regards, Christoph

Hello guys! I'd like to use only the FSUIPC Autosave-Function. My sim is Prepar3dv5.2. Will I need to purchase a license or is there some freeware option that includes Autosave? Thank you for your help, best regards!

Good morning! Yes, I tried - But it didnt change anything :/! Have a great weekend! 🙂

Hello Vic! The PC I use for flight simming is for flight simming only. No other software is running on it, except sim software like Active Sky, VPilot, GSX, etc. For work and other stuff I use a laptop. I use Avast Free Antivirus as antivirus software on my flight simming PC. In addition I set exclusions for all Simming-Folders or Simming-Relevant programs in the Antivirus Setup. Thank you for your help, best regards!

Yes Sir, I do. Lighting of the aircraft is only controlled via the gauges in the VC. Is the Cabin Light supposed to be connected to one of these gauges?

They are simply not on, no matter what I do. So when I look from the outside at the airplane at night, the Cabin appears to be dark (No lighted windows). Have a great upcoming week! Best regards!

Hello Vic! Thank you for the info! I run an RTX3080, 32 GB RAM @ 3600 MHz and an AMD Ryzen 7 5800 X. When i view my performance profile none of these components ever reaches 40 % or above at the settings that I use - I prefer insanely high fps instead of outstanding graphics! 😉 So I guess high CPU loads or running out of memory isn't really a factor - As I said: Thats what I guess, I'm not a pro on that matter, but I really can not imagine it's a factor to my system. Have a great day & also a nice upcoming weekend! 🙂

Good morning! Another question regarding the Feelthere Embraer v3 175/195: Does anyone know how to get the Cabin Lights working at night? Or is it just linked to some other light Im not aware of? Thank you for your help! 🙂

Good morning Phil! Thank you for your research! 🙂 I suspect that some audio files are not perfectly cut, not at 0 dB - And therefore the tick occurs when the file is playing in the loop. But as a man of science Im not a pro in that regards, so we'll see if I'm right or not. 🧐 I'll keep working on it of course and let you know if I can make a step forward to the solution of this issue. Any suggestions or ideas by Feelthere so far? Maybe you can also give other hints in case Im wrong, would be appreciated! Have a great day! Yours, Christoph

Hey Phil! I updated all audio drivers manually using the latest provided by the software by the support. I updated Windows to the latest version. I installed the latest NVidia Driver, cause it also updates NVidia Audio. --> All the same, nothing changed. I somehow believe I dont have a driver issue, cause that would affect all sounds I guess? I also tried to remove all loop sounds of the Feelthere Embraer with a length of 12, 13 or 14 seconds: This just changes the frequency of the ticking or produces other sound issues cause these files are missing then of course. I also added Exclusions to the Defender, cause I thought that could be the reason, but it's not. Somehow I cant figure out how to get rid of that extremely annoying sound. "We only hear and see what we know", was once a quote by a famous philosopher. And yep, he was right. I know its there, so Im gonna recognize 😕

Hey Phil! Thank you so much! Finally hearing the same thing as I do! As I said: I admit it's not obvious - It's surely not loud. When it's about a question like this we also have to consider that everyone got different auditory sensitivtiy depending on the frequency spectrum of the sound itself. And yes, I agree with you Phil, Im pretty sure it's one of the looping sounds. I tried to update my sound drivers already, but in the Windows Device Manager each item says "best drivers are installed already". Do you have any other idea on how to update? I also used different headphones and also used speakers, but it's everywhere the same. So Im sure it's no Hardware Issue. Thanks a lot for your help, much appreciated!

I hear the packs and fans as well. And each 4 seconds a sharp tick : / -) It's not my headphones -) It's not my ears, I've been to the ear doc already -) It's not my PC/System