Jump to content
The simFlight Network Forums

Aviator_Kevin_HD

Members
  • Posts

    8
  • Joined

  • Last visited

Profile Information

  • Gender
    Male
  • Location
    Austria

Aviator_Kevin_HD's Achievements

Newbie

Newbie (1/14)

  • Conversation Starter Rare
  • Week One Done Rare
  • One Month Later Rare

Recent Badges

0

Reputation

  1. Dear Community, I have the Feelthere Embraer for a year now, and I have to say it is one of my favourite planes. I'm using it in Prepar3D V4.5 (latest version) and the Embraer is fully updated. I didn't fly the plane for a few months and can remember that the plane had problems to slow down to the final approach speed and keep a speed on the ILS without going too fast. For example, I'm descending normally, before I get to the ILS I reduce to 170-180 kts, if needed I reduce to 160 knots and later to my final approach speed. But as soon I'm on the ILS there is no chance to get slower. As I know the plane has problems to slow down. I retract my flaps as needed and prepare for my approach, on the ILS I reduce to my final approach speed even earlier than I should, I have Flaps Full Gear Down and prepare for my landing. But then it happens, the plane follows the 3 degree glideslope normally, but it is building up speed and even more, I already tried to extending the speedbrakes but that doesn't help, the descend rate is between -750/800 fpm. I also tried turning off autothrottle and idle the thrust myself, it didn't help either, the thrust was on idle and the plane was overspeeding until touchdown. Especially when I fly on Vatsim I have problems, when the ATC clears me for a speed of 200 there is no chance to get slower. I already tried reinstalling the plane, I turned off my AntiVirus and even ran the installer as an Administrator. My Joystick is also calibrated correctly, since the first time I flew it I have this issue, when I get on the ILS it speeds over and there is no chance to avoid it. Regards, Kevin
  2. I do it with the mouse, I don't use buttons for shutting down the engines and other stuff. I recorded it with Bandicam, so my cursor is not shown, but yes it was with the cursor, there are no duplicate assignements. I use my Joystick for flying but that has nothing to do with startup and shutdown procedures.
  3. I didn't try to restart the engines in the air, I have to explain it, please also watch my video, When I do a normal flight and arrive at my parking position and want to shutdown the engines, nothing happens, the selectors are in the stop position but the engines are not spooling down. Then I did some tests, when I started up the plane and tried to shutdown the engines it worked, but after flying the engines won't spool down for some reason. Everytime after a full flight this happens, but when I do this without taking off and landing this work.
  4. The fun fact is the support is not able to help me, and I never experienced that in the past, I saw before I take off and land, shutting down the engine works, but after the landing nothing happens, my thrust levers are on idle and the switches in the stop position, and even without the fuel pumps the engines don't stop. I tried it on the ground before I was taxing to the runway and there it worked to turn the engines off. But after a full take off and a full landing not. This is so strange.
  5. I already tried to reinstall it, doesn't work. If I startup the plane from Cold & Dark on the ground myself, I'm able to turn off the engines after I started them, but after I took off, landed, and try to shut them down then, no response.
  6. I installed everything as Administrator and disabled my AntiVirusSoftware, my P3D Settings are on 100 % realism, only crashes are out, this only happens when I setup the plane my self in Cold & Dark, in Engines running it works to turn the engine off. I never had that in the past.
  7. Dear Community, I bought the Embraer 195 V3 one year ago on SimMarket, and I used it for a long time, but after I had to reinstall my sim, I downloaded my Embraer 195 V3 again, and wanted to fly it again, everything worked fine when I started flying it again. I landed safely, and at the gate I wanted to shutdown the engines, I selected the engine starters into the stop position, but for some reason nothing happens. The thrust levers are on idle and I have no idea why this happens. I never had that in the past. I recorded it on a video, The video is in the google drive: https://drive.google.com/file/d/1YiUH0h9hbpvqcxKHQolNWfy8dlr7Mnrk/view?usp=sharing If you want to contact me on Discord this is my name: Aviator_Kevin_HD#6703 I noticed that when I put the plane into the engines running state it works when I try to shutdown the engine, but when I put it in Cold & Dark and startup the plane myself, it doesn't work. I already contacted the FeelThere Support, but they said I should write in the forum. Please help me! Regards, Aviator_Kevin_HD
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.