CamoVecmin

Thanks John, looking forward to a setting that I can copy.

Not sure what is going on. I start MSFS, reload all the assignment. Start from cold and dark. As soon as I want to steer to the left or right and my joystick reach its deadzone, the B787 just stop. I put a lot of thrust but the aircraft just pushing the nose gear forward. I reset and rescan, assign to the steering set, calibrate my joystick, got to steering tiller and redo again. The aircraft just acting like it was before, it will take a few test and trail before it got that nice setting but then all setting gone as I quit and restart msfs. I am baffle as to what is happening to this aircraft, when I purchased FSUIPC7, it work like a charm, I just set the setting to steering tiller and I was having fun for a week before all this happened. Damn ASOBO for not being able to fix this. Attach is the*ini and log for your information. I lost hope already and will not touch this B787 anymore. FSUIPC7.log FSUIPC7.ini

Hi, I followed your instructions and I hope I get this right. I have deleted other profile and only kept [Profile.Custom B787]. Have included as well the line under [General]. Instead of Steering tiller, I assign to Steering Set and recalibrate my axis. Hope this help and can solved my current issues. Thanks FSUIPC7.ini FSUIPC7.log

Hello, sorry for the late reply. Been busy with work. BTW, I notice that when I start MSFS, do I need to reset everything? I ask this because, the tiller doesn't work or load when MSFS start from cold and dark compare to start directly at the runaway, ready for take off (FSUIPC7 however automatic start with MSFS) in the end I have to reset and set back everything. Also, if I select from reload all assignment, will it load back the specific profile for specific aircraft that I used at that point of time? I hope the log I attach captured all the required info as I'm not a rocket scientist in this. I'm merely just a plug and play user 🙂 FSUIPC7.ini FSUIPC7.log

Ok. I have some spare time just now and I did what you asked. Also I have done calibrate my the steering axis. So should have it under the profile. Also, in the Steering Tiller (direct!) I reset and set back the setting and playing around with the slope. I'm shocked to find out that the B787 is more responsive now when turning left and right (this is a big aircraft so I play around with throttle for taxiing). Yes for your question rudder in MSFS. Its default there. When I remove it, I can't control the aircraft when taking off (no rudder). Also I have added the line under [General] section. Anyway pls take a look and let me know. FSUIPC7_prev.log FSUIPC7.ini

Thank you for being patience with me. I will try again to do what you advising me to do. Once I have the output will upload it here again. I am currently at work and will finish in 9 hours. Will try to do this once I have the time :)

Ok, I have did as requested and hope this time the output is as expected. The problem still there though 😪 FSUIPC7.log FSUIPC7.ini

I have updated to the latest version. Do a fresh Axis Assignments & Calibration and named the profile to Custom B787. In this new install I did not touch any setting for Steering Tiller (direct!) at Joystick Calibration tab. Some how its responsive now. I will give it a go again and update. This only added later after the problem start happening and I forgot to removed. I'm starting to suspect my joystick now. Because every time I twist to left or right the numbering in In/Out did not stay constant. Keep changing to different value 😅 Attach is the files as requested. FSUIPC7_prev.rar

Sure. Let me install the new one. Activate Axes Controls and Events log. Hopefully by installing the new version that will solved the current issue. I will update. Give me a a couple of hours. Thanks.

Think I found it. Attach is the log file FSUIPC7.1.log

oh okay. Let me update FSUIPC7 first. As for the logs output, where it will be stored?

Hi John/Pete, Omg thank you for your quick response. I have done as instructed but not sure if its correct or not. Attach is the two files. I can't remember much what I did as I'm not a techie guy who knows how to tweak/edit files. All I can remember is that I install 3rd party liveries for my B787 (Malaysia Airlines Liveries) and before I used FSUIPC7. I already have and install FS-ATC-Chatter. That's about it. FSUIPC7.ini MSFS.bat

Greetings fellow flight sims, Name Vecmin, recently I purchased FSUIPC7 from SimMarket on the 1/24/2021 after I was told that it can solved B787 current steering issue while taxiing using rudder axis whereby it can't make a tight turn if player twist the joystick full to the right or left. If player do a tight cornering by twist the joystick full to the left or to the right, the B787 just stop moving and player need to give a 100% full thrust for it to move again. However when using FSUIPC7 and assign this to a steering tiller, all of the above issue gone. The B787 can do a tight cornering without it stuck/stop. Only recently this has stop functioning (a week now). No matter what I do, when the B787 do that tight cornering (where I have to twist my joystick full to the left or right) the B787 will stop/stuck like it was before I use FSUIPC steering tiller. I post similar issue at MSFS 2020 official forum and there's a couple of great guys who was very patience in helping me to get this problem solved. We tried a couple of troubleshooting like assigning numbers directly to the Steering Tiller setting in Joystick calibration but the B787 still not responding. It will stop and stuck when I twist my rudder fully to the left or right. I can't attach screenshot of the FSUIPC7 Axes Assignment that I used for the Steering tiller but maybe I can just described it here: When I twist my joystick to the left and right, the reading for the In=[16383/-16384]. When I twitst my joystick to the left or right, the reading for Out=[12799/-11443][14463/-13393][14719/-14563]. The number does not maintain it will keep changing when I release to center back the joystick. The reading also will be shown something like this [2048][-2211][0] As for Delta sometime the reading will be [5632][128][526] What ever the number shown there now, when I click ok (I create profile for B787) when I near a corner slow down, pressing the break and make a turn, when my joystick reach the dead zone (where I turn all the way to the left or right) the B787 will stop and stuck dead on the ground won't move until I put full thrust 100% to push it forward. Can someone help me out? Thanks. P/s: this is the link to the post that I made in MSFS 2020 official forum for 3 party apps. https://forums.flightsimulator.com/t/fsuipc7-user-do-you-guys-feels-like-something-is-not-right/365160/16