wildeboer

thx

I have both textures visible . I copy the house tex and copy the klm tex in it , overwrite the house tex. did not change the cfg in the house tex. rename house to klm. and at klm cgf in the cfg file. the same with the jetblue tex .

just own the new e170/190 v3 placed in e170 texture aliitalia shows great and in the cfg also. did the same in the 190 . The texture house looks good but the klm and jetblue are nearly black the vc is also black. threis no texture folder in the 190 as it is the 170

hallo pete, the reason that searching outside Aivlassoft is that the also not know how to solve the problem . And the very strange thing is there was never a flightplan to KGBD .And it is not a EFB problem because display unit sends the FP to the data unit and i can see that the dataunit loads the fp. and than in the gps comes prvpos-kgdb. Is there a possibility that in FSX is some checkmark that prevents a FP entry from an other source other than FSX wil

I know that but where I was looking for , could a setting in fsuipc prevent a addon as efb to change fsx flightplan. Because as I said every time I activate the EFB flightpllan than FSX comes with this prvpos-kgbd flightplan . regards wil

I did a fresh clean instal deleted everything I found from efb/aivlasoft. It did not help . the data has fsx connected and simconnect is active , connection from remote display accepted. making FP save in fsx pc documents/flightsimulator X files. activate dataprovider receives new FP ea kfbi-kmfr and gpsmap v290 from carenado piper shows prvpos-kgbd . with the AC on ground at KFBI. put the FP from ffsx flightplanner its ok in gps map after activating in displlay unit on remote or diplay unit on fsx pc (it makes no difference) gaain prvpos-kgbd. I`m running out of options with Aivlasoft EFB . The story: before a HD crash everything works fine fsx, addons , wide fs and the remote connection . after the crash I discided to work with Prepar3d but the FPS where so bad ,I clean everything and install FSXgold edition.with al addons and updates. And again everything works fine fsuipc,widefs and simconnect works fine . Except one thing activating a FP via EFB in fsx as discibed above ,the gps map shows the AC on the airport ,I build a FP in EFB save and activate. And after that the gpsmap from the AC shows always the flioghtplan prvpos-kgbd. Even if I start with teh fsx flightplanner and the right FP shows in the gps the moment i activate a change in EFB the gpsmap shows prvpos-kgbd Is there a possibility that some checkmark in fsuipc(pay version) when there is a FP change and forces to this prvppos-kgbd flightplan Ihave attached the fsuipc ini file. regards wil de boer

I did a fresh clean instal deleted everything I found from efb/aivlasoft. It did not help . the data has fsx connected and simconnect is active , connection from remote display accepted. making FP save in fsx pc documents/flightsimulator X files. activate dataprovider receives new FP ea kfbi-kmfr and gpsmap v290 from carenado piper shows prvpos-kgbd . with the AC on ground at KFBI. put the FP from ffsx flightplanner its ok in gps map after activating in displlay unit on remote or diplay unit on fsx pc (it makes no difference) gaain prvpos-kgbd. I`m running out of options with Aivlasoft EFB . The story: before a HD crash everything works fine fsx, addons , wide fs and the remote connection . after the crash I discided to work with Prepar3d but the FPS where so bad ,I clean everything and install FSXgold edition.with al addons and updates. And again everything works fine fsuipc,widefs and simconnect works fine . Except one thing activating a FP via EFB in fsx as discibed above ,the gps map shows the AC on the airport ,I build a FP in EFB save and activate. And after that the gpsmap from the AC shows always the flioghtplan prvpos-kgbd. Even if I start with teh fsx flightplanner and the right FP shows in the gps the moment i activate a change in EFB the gpsmap shows prvpos-kgbd Is there a possibility that some checkmark in fsuipc(pay version) when there is a FP change and forces to this prvppos-kgbd flightplan Ihave attached the fsuipc ini file. regards wil de boer

Yes pete that was the final part , changing fsuipc.ini ,now it works . thx very much for your kind help. best regards wil

You are right porrt 8002 is in use by a prog. I found portchecker to find out. But i do not wich port i can use insted of 8002

thx pete for the fast reply.Where do I find the severlog file?? and yes it is wideclient log regards wil

For years using fsuipc and widefs no troubles. In the past 1/2 year the remote pc will; not connect to the fsx pc. I have try`d everything I found on the internet ( I think) but the results are the same no connection. W7 ultimate 64bit. Avg internet securety business edition2013 on both pc. Network works perfect progs as Electronic Flightback ,rex essential overdrive,squakwbox no problems . All firewalls closed on both pc. the widefs ini [Config] ServerIPAdress=192.164.1.11 Port=8002 Window=43,44,886,589 Visible=Yes ButtonScanInterval=20 ClassInstance=0 NetworkTiming=5,1 MailslotTiming=2000,1000 PollInterval=2000 Port2=9002 ResponseTime=18 ApplicationDelay=0 TCPcoalesce=No WaitForNewData=500 MaxSendQ=100 OnMaxSendQ=Log NewSendScanTime=50 Priority=3,1,2 ; ----------------------------------------------- [user] Log=Errors+ ; =============================================== [sounds] Path=C:\Users\Gebruiker\Documents\WideFS\Sound\ Device1=Primair geluidsstuurprogramma Device2=Luidsprekers (SB Audigy) Device3=Luidsprekers (2- Logitech Wireless Headset) the widefs log ******** WideClient Log [version 6.999b] Class=FS98MAIN ********* Date (dmy): 11/09/13, Time 14:36:56.009: Client name is WL 3447 Attempting to connect now 3447 Trying to locate server: Need details from Server Broadcast 3447 Failed to connect: waiting to try again 3447 LUA: "C:\Users\Gebruiker\Documents\WideFS\Initial.LUA": not found 5491 Attempting to connect now 7550 Server = WILLY-PC 7566 Trying TCP/IP host "WILLY-PC" port 8002 ... 7566 ... Okay, IP Address = 192.168.1.11 7566 Connection made okay! 7784 Connection closed by server! 7784 Attempting to connect now 11871 Server = WILLY-PC 11871 Trying TCP/IP host "WILLY-PC" port 8002 ... 11871 ... Okay, IP Address = 192.168.1.11 the widefs client0 log 1630632 Server = WILLY-PC 1630647 Trying TCP/IP host "WILLY-PC" port 8002 ... 1630647 ... Okay, IP Address = 192.168.1.11 1630647 Connection made okay! 1630834 Connection closed by server! 1630834 Attempting to connect now 1634937 Server = WILLY-PC 1634937 Trying TCP/IP host "WILLY-PC" port 8002 ... 1634937 ... Okay, IP Address = 192.168.1.11 1634937 Connection made okay! 1635093 Connection closed by server! 1635093 Attempting to connect now 1639196 Server = WILLY-PC 1639196 Trying TCP/IP host "WILLY-PC" port 8002 ... 1639196 ... Okay, IP Address = 192.168.1.11 1639196 Connection made okay! 1639352 Connection closed by server! 1639352 Attempting to connect now 1643439 Server = WILLY-PC 1643439 Trying TCP/IP host "WILLY-PC" port 8002 ... 1643439 ... Okay, IP Address = 192.168.1.11 1643439 Connection made okay! 1643564 Connection closed by server! 1643564 Attempting to connect now 1647636 Server = WILLY-PC 1647636 Trying TCP/IP host "WILLY-PC" port 8002 ... 1647636 ... Okay, IP Address = 192.168.1.11 1647636 Connection made okay! 1647838 Connection closed by server! 1647838 Attempting to connect now 1651894 Server = WILLY-PC 1651894 Trying TCP/IP host "WILLY-PC" port 8002 ... 1651894 ... Okay, IP Address = 192.168.1.11 1651894 Connection made okay! 1652097 Connection closed by server! 1652097 Attempting to connect now 1656106 ****** End of session performance summary ****** 1656106 Total time connected = 68 seconds 1656106 Reception maximum: 0 frames/sec, 0 bytes/sec 1656106 Reception average whilst connected: 0 frames/sec, 0 bytes/sec 1656106 Transmission maximum: 0 frames/sec, 89 bytes/sec 1656106 Transmission average whilst connected: 2 frames/sec, 709 bytes/sec 1656106 Max receive buffer = 0, Max send depth = 1, Send frames lost = 1 1656106 ********* Log file closed (Buffers: MaxUsed 1, Alloc 148 Freed 148 Refused 0) ********* firewalls in windows and avg disabled