Jump to content
The simFlight Network Forums

tiburon

Members
  • Posts

    24
  • Joined

  • Last visited

Posts posted by tiburon

  1. Hi,

    I recently upgraded my FSC 9.6 to 10, also in the hope that an annoying problem I had in the old version would disappear. In the Flight plan panel on the right side are two tick-boxes called "High Alt" and "Low Alt" The High Alt box is ticked. When I try to tick the Low Alt box, the program freezes and can only be closed by ending it in Windows Task Manager.
    I did follow the recommendations for uninstalling, copying the important files and replacing them again.. I'm afraid though that somewhere in these files there's something corrupt.

    It's a networked installation on Windows 10, connected to FSX, FSUIPC version  480 (the problem however occurs also with the FS pc switched off)

    Navigraph Airac cycle 1802

    FSC downloaded from Simmarket. FSX pc has three monitors, FSC pc has two monitors.

    Regards

    Martin Bunjes

  2. Hi,

     

    After upgrading to FSC9.6 I am unable to delete waypoints by rightclicking the waypoint in the flight plan table and choosing "delete waypoint"

    The option is there, but nothing happens. FSX is not running.

     

    My specs:

     

    FSC 9.6.1

    Database manager 9.6 (januari 2015)

    Networked configuration

    FSX + acceleration

    FSUIPC 4.938

    wideclient 6.995

    Navigraph airac NG1503

    Downloaded from Simmarket

    Windows 7 64bit Ultimate

     

    Thanks in advance

     

    Martin

  3. Hi,

     

    I don't know if this can be done : I'm trying to toggle the 2D right CDU in my PMDG 737NGX by assigning a button to Panel id toggle or panel toggle (what's the difference?)

    It opens all right but doesn't close again so no toggle.This panel has no keyboard shortcut like the other panels but can be toggled from the "view" menu in FSX.

    Is there a way to do this ?

     

    regards

     

    Martin

  4. Hi Volker,

     

    Hope you can help me. I have recently reinstalled FSC9.5 with Database manager 9.5 on a wide client pc, Windows 7 64bit.

    Airac 1409 is installed from Navigraph.

    After I start FSC and try to click the "show flightplan button" I get a run time error 9 : subscript out of range and FSC crashes :

     

    Problem Event Name:    APPCRASH
      Application Name:    FSC.exe
      Application Version:    9.5.0.0
      Application Timestamp:    52caf490
      Fault Module Name:    StackHash_29dc
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Code:    c000041d
      Exception Offset:    74f14f0d
      OS Version:    6.1.7601.2.1.0.256.1
      Locale ID:    1043
      Additional Information 1:    29dc
      Additional Information 2:    29dc57607917075e056acfb9b1b984fa
      Additional Information 3:    e709
      Additional Information 4:    e7091213db43cb3b55bb3cdb93dc31f0

     

    regards

     

    Martin

  5. Here's the information from the event viewer :

    Faulting application name: fsx.exe, version: 10.0.61637.0, time stamp: 0x46fadb14
    Faulting module name: PMDG_737NGX.DLL, version: 1.0.0.0, time stamp: 0x4f5162a3
    Exception code: 0xc0000005
    Fault offset: 0x00016c30
    Faulting process id: 0x84c
    Faulting application start time: 0x01cfba36ffc1c6de
    Faulting application path: D:\FSX\fsx.exe
    Faulting module path: D:\FSX\GAUGES\PMDG_737NGX.DLL
    Report Id: 450896c6-262a-11e4-b169-74d435e52476
    

    I can't create a new flight with the 737NGX : when I choose the airport, the gate or parking, the PMDG aircraft and press fly now, FSX crashes after 3 %

    I can create one with the default ultralight, change to the NGX and fly. After saving the same crashes occur. However when i delete the FSUIPC.ini everything works as it should.

  6. Pete, thanks for your answer, I hope you had a nice holiday.

    My FSUIPC is up to date

    Here's my FSUIPC.ini :

    [General]
    UpdatedByVersion=4934
    History=MV78QUYMX68RZOAT4KDY8
    InitDelayDevicesToo=No
    NewInterceptTextMenu=No
    UseSystemTime=No
    UseMidMouseBtn=Yes
    MouseWheelMove=No
    MouseWheelTrim=No
    MouseWheelTrimSpeed=1
    JoystickTimeout=20
    PollGFTQ6=Yes
    BlankDisplays=No
    FixControlAccel=No
    FixMachSpeedBug=No
    DeleteVehiclesForAES=Yes
    AutoScanDevices=Yes
    VisibilityOptions=No
    OneCloudLayer=No
    CloudTurbulence=No
    CloudIcing=No
    GenerateCirrus=No
    SuppressCloudTurbulence=No
    MaxIce=-4
    MinIce=-4
    UpperWindGusts=No
    SuppressWindTurbulence=No
    SuppressWindVariance=No
    WindTurbulence=No
    TurbulenceRate=1.0,5.0
    TurbulenceDivisor=20,20,40,40
    SuppressAllGusts=No
    MaxSurfaceWind=0
    WindLimitLevel=200
    WindDiscardLevel=400
    WindAjustAltitude=No
    WindAjustAltitudeBy=2000
    SmoothBySimTime=No
    WindSmoothing=No
    WindSmoothness=2
    WindSmoothAirborneOnly=Yes
    PressureSmoothness=0
    TemperatureSmoothness=0
    DisconnTrimForAP=No
    ZeroElevForAPAlt=No
    ThrottleSyncAll=No
    WhiteMessages=No
    ShowPMcontrols=No
    SpoilerIncrement=512
    MagicBattery=No
    RudderSpikeRemoval=No
    ElevatorSpikeRemoval=No
    AileronSpikeRemoval=No
    ReversedElevatorTrim=No
    ClockSync=No
    ClockSyncMins=5
    ClearWeatherDynamics=No
    OwnWeatherChanges=No
    TimeForSelect=4
    LoadFlightMenu=No
    LoadPlanMenu=No
    PauseAfterCrash=No
    BrakeReleaseThreshold=75
    SaveDataWithFlights=No
    ZapSound=firework
    ShortAircraftNameOk=Substring
    UseProfiles=Yes
    EnableMouseLook=No
    DelayedMouseLookZoom=No
    AxesWrongRange=No
    TCASid=Flight
    TCASrange=40
    AxisCalibration=No
    DirectAxesToCalibs=No
    ShowMultilineWindow=Yes
    SuppressSingleline=No
    SuppressMultilineFS=No
    AxisIntercepts=No
    DontResetAxes=No
    InitDelay=0
    GetNearestAirports=Yes
    OOMcheck=Yes
    WeatherReadFactor=2
    WeatherRewriteSeconds=1
    CustomWeatherModify=No
    SimConnectStallTime=1
    LuaRerunDelay=66
    Console=No
    FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0
    SimConnectUsed=10.0.61259.0
    
    [JoyNames]
    AutoAssignLetters=No
    0=Saitek Pro Flight Yoke
    0.GUID={84F6EDF0-1708-11E4-8001-444553540000}
    2=Saitek Pro Flight Rudder Pedals
    2.GUID={00DDA6C0-1731-11E4-8003-444553540000}
    3=UnoJoy Joystick
    3.GUID={00DDA6C0-1731-11E4-8004-444553540000}
    4=UnoJoy Joystick
    4.GUID={00DDA6C0-1731-11E4-8005-444553540000}
    1=BU0836X Interface
    1.GUID={37E14950-1719-11E4-8005-444553540000}
    5=G-Throttles
    5.GUID={A080BF00-171D-11E4-8007-444553540000}
    
    [Buttons]
    ButtonRepeat=20,10
    1=P4,12,K50,9
    2=P4,13,K51,9
    3=P4,14,K52,9
    4=P4,15,K53,9
    5=P4,16,K54,9
    6=P4,17,K55,9
    7=P4,18,K56,9
    8=P5,4,C66068,0
    9=P5,2,K113,11
    10=U5,2,K112,11
    11=P5,3,K115,11
    12=U5,3,K114,11
    13=P5,5,K71,11
    14=P0,0,K49,11
    18=P1,7,C70087,2
    19=P1,6,C70087,0
    20=R5,0,C65602,0
    21=U5,0,C65697,0
    22=P1,5,CM1:1,0
    23=P1,0,K50,11
    24=P1,3,K77,11
    25=P1,4,K78,11
    26=P1,1,C65752,0
    27=P1,2,C65752,0
    28=U1,6,C74183,1
    
    [AutoSave]
    Next=1
    Interval=60
    Files=10
    SaveOnGround=No
    AutoSaveEnabled=No
    
    [GPSout]
    GPSoutEnabled=No
    
    [GPSout2]
    GPSoutEnabled=No
    
    [WideServer]
    WideFSenabled=Yes
    AdvertiseService=1
    Port=8002
    Port2=9002
    
    [Sounds]
    Path=D:\FSX\Sound\
    Device1=Primary Sound Driver
    Device2=Realtek Digital Output(Optical) (Realtek High Definition Audio)
    Device3=Realtek Digital Output (Realtek High Definition Audio)
    
    [Axes]
    RangeRepeatRate=10
    0=0X,1,D,1,0,0,0
    1=0Y,1,D,2,0,0,0
    2=2X,1,D,7,0,0,0
    3=2Y,1,D,8,0,0,0
    4=2R,1,D,3,0,0,0
    5=5X,1,D,9,0,0,0
    6=5Y,1,D,10,0,0,0
    7=5Z,1,D,23,0,0,0
    8=5U,1,D,22,0,0,0
    
    [JoystickCalibration]
    AllowSuppressForPFCquad=Yes
    ExcludeThrottleSet=Yes
    ExcludeMixtureSet=Yes
    ExcludePropPitchSet=Yes
    SepRevsJetsOnly=No
    ApplyHeloTrim=No
    UseAxisControlsForNRZ=No
    FlapsSetControl=0
    FlapDetents=No
    ReverserControl=66292
    Reverser1Control=66422
    Reverser2Control=66425
    Reverser3Control=66428
    Reverser4Control=66431
    MaxThrottleForReverser=256
    AileronTrimControl=66731
    RudderTrimControl=66732
    CowlFlaps1Control=66162
    CowlFlaps2Control=66163
    CowlFlaps3Control=66164
    CowlFlaps4Control=66165
    SteeringTillerControl=0
    MaxSteerSpeed=60
    Aileron=-16384,0,0,16256
    Elevator=-16384,0,512,16383
    Rudder=-16384,0,512,16383
    Throttle1=-16384,-512,512,16299/32
    Throttle2=-16384,-512,512,16214/32
    Spoilers=-16384,16383
    Flaps=-16350,16350
    LeftBrake=-16384,16383/16
    RightBrake=-16380,16380/16
    SlopeThrottle1=10
    SlopeThrottle2=10
    SlopeRudder=7
    
    [MacroFiles]
    1=tcas
    
    [Keys]
    1=65,11,1092,0
    
    

    And the FSUIPC.log from the time of the crash. :

    ********* FSUIPC4, Version 4.934 by Pete Dowson *********
    Reading options from "D:\FSX\Modules\FSUIPC4.ini"
    Running inside FSX on Windows 7
    Module base=6E1E0000
    User Name="Martin Bunjes"
    User Addr="mbunjes@chello.nl"
    FSUIPC4 Key is provided
    WideFS7 Key is provided
            0 System time = 17/08/2014 15:58:13
            0 FLT UNC path = "D:\Documents\Flight Simulator X Files\"
          717 Trying to connect to SimConnect Acc/SP2 Oct07 ...
          717 FS UNC path = "D:\FSX\"
          858 LogOptions=00000000 00000001
          858 SIM1 Frictions access gained
          858 Wind smoothing fix is fully installed
          858 G3D.DLL fix attempt installed ok
          858 SimConnect_Open succeeded: waiting to check version okay
          858 Trying to use SimConnect Acc/SP2 Oct07
         2246 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)
         2246 Initialising SimConnect data requests now
         2246 FSUIPC Menu entry added
         2277 D:\FSX\FLIGHTS\OTHER\FLTSIM.FLT
         2277 D:\FSX\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR
        10452 D:\FSX\SimObjects\Airplanes\PMDG 737-800NGX WL\B737-800WL.AIR
        10452 Weather Mode now = Theme
        10452 d:\documents\flight simulator x files\ktnt.FLT
    
    
  7. For three weeks I've been trying to get my FSX on my new pc to work with PMDG 737NGX. I could not load a PMDG aircraft without FSX crashing after 3 % loading.

    There's nothing else installed : just FSX (with acceleration) and the PMDG 737NGX.

    I could load the default trike and switch to the NGX , save it, end the flight, try to load it : crash

    I had a lot of hardware connected which I removed : all was well. I then enabled all hardware one by one and still everything kept working : I could build a flight, save it, restart the computer and load it again : great.

    I tried again without changing anything a few days later : at 3 % loading : crash.

    I followed the AVSIM crash guide which led me to the point of disabling modules and see if any of these would be the culprit. Lo and behold : I disabled the FSUIPC module and everything worked. I deleted the FSUIPC.ini and everything worked. I then pasted the key assignments from the saved FSUIPC.ini in the new one and FSX crashed again.

    My question : is it really the key assignments that's crashing my pc ? I somehow suspect it's something to do with dodgy add-on hardware in wich case I'm out of my depth.

     

    I hope Pete or someone can point me in the right direction.

     

    cheers

     

    Martin

  8. Today I tried to do a flight with the PMDG 737NGX after updating FSUIPC to the latest version but suffered 4 times a program crash (not responding) each time FSX came back up after about 10 minutes.

    Here are the event viewer and FSUIPC logs :

     

    first crash actually names FSUIPC as fault module :

     

    Faulting application name: fsx.exe, version: 10.0.61637.0, time stamp: 0x46fadb14
    Faulting module name: FSUIPC4.dll, version: 4.9.1.0, time stamp: 0x51ff66ff
    Exception code: 0xc00000fd
    Fault offset: 0x0009cde7
    Faulting process id: 0x3b0
    Faulting application start time: 0x01cf11e00eafa7b2
    Faulting application path: D:\_Microsoft Flight Simulator X\fsx.exe
    Faulting module path: D:\_Microsoft Flight Simulator X\Modules\FSUIPC4.dll
    Report Id: 7d994e71-7ddb-11e3-82b2-1c6f65c38968

     

    FSUIPC log:

     

    ********* FSUIPC4, Version 4.91 by Pete Dowson *********
    Running inside FSX on Windows 7
    Module base=6AFA0000
    User Name="Martin Bunjes"
    User Addr="mbunjes@chello.nl"
    FSUIPC4 Key is provided
    WideFS7 Key is provided
           62 System time = 15/01/2014 11:54:00
           62 FLT UNC path = "\\FSX\Flight Simulator X Files\"
          374 Trying to connect to SimConnect Acc/SP2 Oct07 ...
          374 FS UNC path = "\\FSX\_Microsoft Flight Simulator X\"
          702 LogOptions=00000000 00000001
          702 SIM1 Frictions access gained
          702 Wind smoothing fix is fully installed
          702 G3D.DLL fix attempt installed ok
          702 SimConnect_Open succeeded: waiting to check version okay
          702 Trying to use SimConnect Acc/SP2 Oct07
         3120 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)
         3120 Initialising SimConnect data requests now
         3120 FSUIPC Menu entry added
         3151 \\FSX\_Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT
         3151 \\FSX\_Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR
        17986 Weather Mode now = Theme
        31356 \\FSX\_Microsoft Flight Simulator X\SimObjects\Airplanes\PMDG 737-800NGX WL\B737-800WL.AIR
        31356 Weather Mode now = Custom
        31356 \\FSX\Flight Simulator X Files\zmbh.FLT
        36145 System time = 15/01/2014 11:54:36, Simulator time = 11:02:23 (05:02Z)
        36145 Aircraft="PMDG 737-800NGX VPA Winglets"
        58422 Starting everything now ...
        62088 Advanced Weather Interface Enabled
       167623 Weather Mode now = Theme
       167623 Weather Mode now = Custom
       274951 Sim stopped: average frame rate for last 222 secs = 28.3 fps
       491527 FSUIPC Display Title set = "Radar Contact"
      1982367 Weather Mode now = Theme
      1982429 Weather Mode now = Custom
      2933692 Weather Mode now = Theme
      2933770 Weather Mode now = Custom
     

     

     

     

    Ok, I updated FSUIPC and started flying again but FSX crashed three times in quick succession, each time taking about 10 minutes to recover

     

    event log (from last crash)

     

    Log Name:      Application
    Source:        Application Hang
    Date:          15-1-2014 15:42:47
    Event ID:      1002
    Task Category: (101)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      FSX
    Description:
    The program fsx.exe version 10.0.61637.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
     Process ID: f50
     Start Time: 01cf11ec8a1975c1
     Termination Time: 136
     Application Path: D:\_Microsoft Flight Simulator X\fsx.exe
     Report Id: 4ae08dca-7df3-11e3-82b2-1c6f65c38968

    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Hang" />
        <EventID Qualifiers="0">1002</EventID>
        <Level>2</Level>
        <Task>101</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-01-15T14:42:47.000000000Z" />
        <EventRecordID>23450</EventRecordID>
        <Channel>Application</Channel>
        <Computer>FSX</Computer>
        <Security />
      </System>
      <EventData>
        <Data>fsx.exe</Data>
        <Data>10.0.61637.0</Data>
        <Data>f50</Data>
        <Data>01cf11ec8a1975c1</Data>
        <Data>136</Data>
        <Data>D:\_Microsoft Flight Simulator X\fsx.exe</Data>
        <Data>4ae08dca-7df3-11e3-82b2-1c6f65c38968</Data>
        <Binary>55006E006B006E006F0077006E0000000000</Binary>
      </EventData>
    </Event>

     

    FSUIPC log :

     

    ********* FSUIPC4, Version 4.928 by Pete Dowson *********
    Running inside FSX on Windows 7
    Module base=69F90000
    User Name="Martin Bunjes"
    User Addr="mbunjes@chello.nl"
    FSUIPC4 Key is provided
    WideFS7 Key is provided
           47 System time = 15/01/2014 13:23:17
           47 FLT UNC path = "\\FSX\Flight Simulator X Files\"
           78 Trying to connect to SimConnect Acc/SP2 Oct07 ...
           78 FS UNC path = "\\FSX\_Microsoft Flight Simulator X\"
          405 LogOptions=00000000 00000001
          405 SIM1 Frictions access gained
          405 Wind smoothing fix is fully installed
          405 G3D.DLL fix attempt installed ok
          405 SimConnect_Open succeeded: waiting to check version okay
          405 Trying to use SimConnect Acc/SP2 Oct07
         1529 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)
         1529 Initialising SimConnect data requests now
         1529 FSUIPC Menu entry added
         1544 \\FSX\_Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT
         1544 \\FSX\_Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR
        10608 \\FSX\_Microsoft Flight Simulator X\SimObjects\Airplanes\PMDG 737-800NGX WL\B737-800WL.AIR
        10608 Weather Mode now = Custom
        10608 \\FSX\Flight Simulator X Files\zmbh.FLT
        13478 Aircraft="PMDG 737-800NGX VPA Winglets"
        13478 System time = 15/01/2014 13:23:30, Simulator time = 11:02:23 (05:02Z)
        97298 Starting everything now ...
       100776 Advanced Weather Interface Enabled
       239461 Sim stopped: average frame rate for last 143 secs = 27.3 fps
       380751 FSUIPC Display Title set = "Radar Contact"
      1066532 Sim stopped: average frame rate for last 754 secs = 27.3 fps
      1341562 Sim stopped: average frame rate for last 270 secs = 27.9 fps
      4870226 **** No SimConnect events or states being received! Re-connecting now ... ****
      4870335 SimConnect_Open succeeded: waiting to check version okay
      4870335 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)
      4870335 Initialising SimConnect data requests now
      4870335 FSUIPC Menu entry added
      4870632 \\FSX\FSX\Previous flight.FLT
      4870866 System time = 15/01/2014 14:44:28, Simulator time = 07:48:11 (01:48Z)
      8162503 **** No SimConnect events or states being received! Re-connecting now ... ****
      8162612 SimConnect_Open succeeded: waiting to check version okay
      8162612 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)
      8162612 Initialising SimConnect data requests now
      8162612 FSUIPC Menu entry added
      8163064 System time = 15/01/2014 15:39:20, Simulator time = 08:08:59 (02:08Z)
     

    I hope someone (Pete ?) wil be able to shed some light. Up to today I have done  flights almost every day without any problems.

     

    regards

     

    martin

     

     

     

     

  9. Hi,

    I recently finished a little throttle console with some switches to use with the PMDG 737, I assigned the switches to the offsets for engine start and parking brake through the OC USB-keys card and FSUIPC, everything worked flawlessly.

    The other day, however, I tried to start a flight and was unable to set the parking brakes ! Not with the assigned switch, not by mouse-clicking on the parking brake, not by using the key combination ctrl ., nothing moved the parking brake.

    What I noticed however was on another networked computer where active sky and some other applications run through WideFS my parking brake switch, only connected to the FS computer, was changing the tabs in Firefox !!

    I tried disconnecting everything and although the strange behaviour in Firefox stopped, I still could not move the parking brake. Tried restarting FS, reloading different airplanes, nothing.

    I hope somebody can give me some explanation as to what could cause this strange behaviour.

    regards

    Martin

  10. Hi,

    I suspect this is a hardware issue, but I have to rule everything out:

    On my Saitek Pro Flight Throttle I have all axes mapped through FSUIPC and it worked fine up till a few days ago.

    Now one of the axes gives the following values : it starts at 16383 and goes down till 0 halfway but then shoots back up to 16383 and ends at 6016. The numbers never turn negative.I can calibrate all I want (b.t.w. the option to calibrate under windows has disappeared from the game controller applet, is this normal ?)

    Do I have to buy a new throttle or is there a setting I have overlooked ?

    Thanks for your help

    Martin

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.