binto100
-
Posts
17 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by binto100
-
-
Hi Peter.
I'd guess this has been asked and answered before more than once. I am running the Lear45 on P3Dv4 on a Win10 box with the latest FSUIPC. I have assigned Throttle1 and Throttle2 axes for calibration in FSUIPC and they work fine except the reversers are engaging when the throttles are lowered beyond a certain point. I want the engines to be at idle when the throttle levers are in their lowest position and not engage the reversers, which I want to handle separately.
Can you please give me a hand or point me in the right direction? I could not find a solution in the documentation, though it may be there. Thank you.
Regards, Bruce Berg
-
Hello.
I've post this on a couple other forums and thought I'd take a shot here too.
I recently installed WideView on two Win7 computers but just can't get the client to sync well with the server. I have tried many different Configure settings as well as the Default settings.
The server is an I-5 750 on a Gigabyte board that will easily run 50-60 fps and the client is an E8500 on a EVGA 690i that runs just a bit slower; I have them both set to 33 fps. I use an older Buffalo router but both client and server are attached to a new high-speed D-link switch. I tried a Linksys switch just to test and there was no difference.
I use a utility called Currport to see what ports are open. As per WV instructions I initially set the server & client to socket 8000 but one or the other (can't remember which) would not open an 8000 UDP port. I changed both server and client to socket 8002 and got an 8002 UDP connection on both server and client..
I note there were several FSX ports (UDP and TCP) open on both the server and client, numbered between 8000 and 50000 (e.g. 45678). Is it normal to have several ports open?
To experiment I set both client and server to socket 45000 but that did not work at all. I don't know much about ports but I thought I could just set a corresponding port on each computer and they would connect if available.
I think my computers are powerful enough but it seems my server has a real problem sending out network packets? I would appreciate any help or suggestions as I really want this system to work. Possibly a Gigabyte borad issue?
Thanks.
Bruce
-
I purchased the P-38 a few months back and have only flown it a few times. Last night I was flying KJFK to CYYC (Toronto) with FS Commander 8.4 (with the GPS screen on FSX) and Duenna running. I use a Saitek Yoke/Throttle and map everything through FSUIPC. About 25 min into the flight the ailerons quit working and the elevator soon after. It happened 3 times b/f I gave up.
I'm wondering if it's somehow trying to engage an autopilot that does not exist on the P-38 or if it's something completely diff?
Any thoughts or suggestions would be appreciated. Thanks.
Bruce
FSX/SP2/Acceleration
FSUIPC 4.40
FS Commander 8.4
Download version from your website
Vista64
-
"I replaced the old one with this one, and panning works almost the same, perhaps slightly smoother than before, but not as well as with FSX in control.-
Should I change something in my hat configuration ?"
Here it works absolutely the same as in FSX. I have no idea what your hat configuration looks like, so how can I suggest any change? I have a hat assigned to the Pan View axis in FSUIPC4's Axis Assignments. That's it, nothing else to assign.
It sounds like you are still using the Button assignments either instead, or as well. Check all this. The improved operation can only work with the axis assignment, and that is regulated to provide exactly the same repeat rate as demonstrated by FSX.
In other words, for the same assignment, FSUIPC4 is now doing the same as FSX, so I cannot do any more.
Regards
Pete
Pete - It's a huge improvement and is 100% FSX like except for a very brief intermittent stutter if you keep the hat "pegged" in one direction. A non-issue in practicality.
Thanks very much.
I'm guessing the person above is sending a right side button control in the Axis Assignment tab which you don't want to do. All I did was scan the hat button in Axis Assignment (in my case Joy #2 P) and "Send to FS as normal axis" on the left side as "Pan View". It works great, it's fast and smooth.
Thanks again.
Bruce
-
Peter -
Sorry my bad. As usual I tend to think the world revolves around me!
I shall download the new dll tonight and give it a whirl.
Thanks.
Bruce
-
Hi Peter.
Just wondering if you've had a chance to give this any thought.
Regards,
Bruce Berg
-
I'll keep my eyes open, thanks ever so much!
Bruce
-
Ok Pete I installed V4.3 but there was no difference that I could tell as far as this discussion is concerned.
Bruce
-
Does it work at all properly with PAN VIEW as an axis? It shouldn't, at present, because FSUIPC doesn't repeat values, it only sends changes -- from the lggoing it is obvious that FS makes use of the repeats.
This line is generated by assigning it to P axis:
5=2P,1,F,66416,0,0,0
The effect is to move one click in the correct direction(s) which each click of the POV hat.
This line is generated by assigning it to P axis but on right side as a "Control to be sent when range entered" (parameter 90, Control to Repeat):
6=2P,BR,0,0,66416,90
The effect is repeating movement to the right, but jerky, not fast and smooth.
Adding this line directly below results in jerky movement in the 135 degree direction:
7=2P,BR,0,0,66416,180
A keyboard repeat rate it normaly less than the Button repeat rate I use, so I don't understand that.
I have my keyboard set to fast repeat and a "seat of the pants" test shows it repeats about 30 times per second.
There's a point. What version of FSUIPC4 are you trying this on? Recent changes should make axis controls independent of SimConnect, but not normal button ones.
I'm on V4.28.
I'm also a bit confused as to what other users, before you, have said it is smooth? Maybe something else in the system has a bearing on it?If you're confused you can imagine how I feel! I can't speak to anyone else's experience esp. since I'm still such a pup in all this. That's why I hope someone might weigh-in and say "it's pretty smooth but not butter smooth like FS direct".
-
I've tried PAN_VIEW (66416) as an Axis, Button & Keypress all with the same results - it's just not as fast and smooth as when using Pan through an fs enabled joystick.
Because pressing and holding Num8, Num6, Num2 etc (NUMx) on the keyboard works fine with the exception of the small initial hesitation of a keyboard press before repetition, I thought I'd just assign a repeating NUMx to POV buttons 32-39 in Buttons + Switches but no go. It's lacking the repetitive speed.
You mention:
"Mind you, this probably won't work as FS seems to rely on the axis repeating all the time, and FSUIPC cuts out repetitive values: possibly I should not do that for POV inputs. In fact I'll look at that next week. Maybe that will solve it in a tidier fashion."
I wonder if that might not do the trick? I note the speed & smoothness between a POV button enabled in FS appears to be identical to that of a NUMx held down on the keyboard except that the POV button is instant and constant whereas the keyboard is instant then followed by the slight hesitation before becoming constant.
Regards,
Bruce
-
Okay I enabled controls in FSX and did the logging:
Here's the log file with just Events (non-axis controls) logged and about a half-second in each direction on the pov:
1921121 Sim stopped: average frame rate for last 35 secs = 29.8 fps
1929452 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929499 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929530 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929561 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929592 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929623 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929655 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929686 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929733 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929764 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929795 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929826 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929857 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929889 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929920 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929967 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1929998 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1930029 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1930060 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1930091 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1930123 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1930154 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1930201 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
1930232 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW
1930700 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1930731 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1930762 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1930793 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1930825 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1930871 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1930903 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1930934 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1930965 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1930996 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931027 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931059 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931105 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931137 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931168 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931199 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931230 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931261 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931293 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931339 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931371 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931402 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931433 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931464 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
1931495 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW
1935317 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935364 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935395 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935427 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935458 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935489 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935520 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935551 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935598 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935629 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935661 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935692 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935723 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935754 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935785 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935832 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
1935863 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW
1936300 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936331 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936363 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936394 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936425 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936456 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936503 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936534 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936565 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936597 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936628 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936659 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936690 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936737 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936768 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936799 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936831 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936862 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936893 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
1936924 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW
[Log closed by user request, and continued in new file]
Here's the log of just Axis controls:
2015611 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15935 (0xffffc1c1) AXIS_THROTTLE_SET
2015642 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2015689 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2017483 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2017530 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2018591 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2018622 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2018762 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2018794 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2019324 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2019355 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2020073 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2020104 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2020307 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2020338 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2020603 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2020634 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2022382 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
[Log closed by user request, and continued in new file]
I don't know why I'm getting and Axis_Throttle_Set here as I've got the throttle axis disabled on this control in FSX (CH Fighterstick) but it probably doesn't have anything to do with the smooth Pan.
For the heck of it here's the log with both Events and Axis enabled in logging:
2112878 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15935 (0xffffc1c1) AXIS_THROTTLE_SET
2112909 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2112940 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2113408 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2113439 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2113907 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2113985 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2114719 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
2114750 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
2114781 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
2114812 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
2114843 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
2114875 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
2114921 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
2114953 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
2114984 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
2115015 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
2115046 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) PAN_VIEW
2115077 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW
2115421 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
2115452 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
2115483 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
2115514 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
2115545 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
2115577 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
2115623 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
2115655 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
2115686 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
2115717 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
2115748 *** EVENT: Cntrl= 66416 (0x00010370), Param= 90 (0x0000005a) PAN_VIEW
2115779 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW
2115811 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2115857 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2115982 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2116013 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2116091 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
2116123 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
2116154 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
2116185 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
2116216 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
2116247 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
2116294 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
2116325 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
2116357 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
2116388 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
2116419 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
2116450 *** EVENT: Cntrl= 66416 (0x00010370), Param= 0 (0x00000000) PAN_VIEW
2116481 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW
2116528 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2116559 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2116918 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
2116949 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
2116996 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
2117027 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
2117059 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
2117090 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
2117121 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
2117152 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
2117183 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
2117230 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
2117261 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
2117293 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
2117324 *** EVENT: Cntrl= 66416 (0x00010370), Param= 270 (0x0000010e) PAN_VIEW
2117355 *** EVENT: Cntrl= 66416 (0x00010370), Param= -1 (0xffffffff) PAN_VIEW
2117823 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2117854 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2118057 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2118104 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2119352 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2119383 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
2119882 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15940 (0xffffc1bc) AXIS_THROTTLE_SET
2119913 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16068 (0xffffc13c) AXIS_THROTTLE_SET
[Log closed by user request, and continued in new file]
Sorry I don't know how to post a log that is embedded and "scrolls".
Appreciate your thoughts Pete.
Regards,
Bruce
-
A suggested method for FSX is very similar to the one above, but uses “PAN_VIEW” with a parameter of –1 to restore the previous view in Virtual Cockpit mode, rather than straight ahead:
1=R0,32,C65734,0 ; PAN_UP
2=U0,32,C66416,-1 ; PAN_VIEW -1
3=R0,33,C65856,0 ; PAN_RIGHT_UP
4=U0,33,C66416,-1 ; PAN_VIEW -1
5=R0,34,C65672,0 ; PAN_RIGHT
6=U0,34,C66416,-1 ; PAN_VIEW -1
7=R0,35,C65857,0 ; PAN_RIGHT_DOWN
8=U0,35,C66416,-1 ; PAN_VIEW -1
9=R0,36,C65735,0 ; PAN_DOWN
10=U0,36,C66416,-1 ; PAN_VIEW -1
11=R0,37,C65855,0 ; PAN_LEFT_DOWN
12=U0,37,C66416,-1 ; PAN_VIEW -1
13=R0,38,C65671,0 ; PAN_LEFT
14=U0,38,C66416,-1 ; PAN_VIEW -1
15=R0,39,C65854,0 ; PAN_LEFT_UP
16=U0,39,C66416,-1 ; PAN_VIEW -1
Thanks to Barrie for this idea and its testing.
I've got this programmed in and it works okay but it's not nearly as smooth and fast as when FSX handles the panning (vs. FSUIPC). My controls are disabled through FSX and I'm only using FSUIPC. I'd appreciate hearing from anyone who, using FSUIPC, has the panning working as smoothly and quickly as with FSX.
I'd like to use FSUIPC only and not enbale controllers at all in FSX.
Thanks.
Bruce
-
Hi Pete.
I'm trying to further my understanding of the simple things in my registered copy of FSUIPC.
Here is a section of my ini file:
[buttons]
7=P1,15,C66079,0
8=P1,13,C66080,0
9=P0,15,C66079,0
10=P0,13,C66080,0
11=P2,3,C65607,0
12=P2,2,C65615,0
13=R0,2,C1010,0
14=R0,3,C1011,0
16=R2,32,C65734,0
17=R2,36,C65735,0
20=R2,34,C65672,0
21=R2,38,C65671,0
22=P2,13,C65759,0
23=P2,15,C65758,0
For my current controllers, 0 = CH Pro Throttle, 1 = CH Pro Pedals and 2 = CH Fighterstick.
1) What is the difference between P & R? For example line 21=R2… and line 22=P2…
2) Why do 7 & 8 above appear? Isn’t that saying that the Pedals (P1) button 15 & 13 (which of course don’t exist) raise and lower the gear? I’ve deleted the lines but they seem to reappear? I assigned those functions in lines 9 & 10 and they appear correctly.
[Axes]
3=2Y,256,F,65762,0,0,0
0=0Z,256,F,65765,0,0,0
1=1Z,256,F,65764,0,0,0
2=2X,256,F,65763,0,0,0
4=2Z,256,D,2,0,0,0
I disabled joysticks in FS and started assigning them in FSUIPC and the above entries appeared.
1) What is the difference between the F’s and D’s?
The following (partial list) was a suggested method for FSX using “PAN_VIEW” with a parameter of –1 to restore the previous view in Virtual Cockpit mode, rather than straight ahead:
1=R0,32,C65734,0 ; PAN_UP
2=U0,32,C66416,-1 ; PAN_VIEW -1
3=R0,33,C65856,0 ; PAN_RIGHT_UP
4=U0,33,C66416,-1 ; PAN_VIEW -1
5=R0,34,C65672,0 ; PAN_RIGHT
6=U0,34,C66416,-1 ; PAN_VIEW -1
1) What is the difference between R & U? For example line 1=R0… and line 2=U2…
2) I understand the assignment in the R’s but I don’t understand what the parameter of –1 in the U’s does, i.e. I don’t understand “to restore the previous view in Virtual Cockpit mode, rather than straight ahead”.
Thanks for your time.
Bruce
-
If you don't want to use a map, the next release of the Control Manager has an install option to let it program only the MFP, the rest of the CH controllers will still use the Windows standard drivers. If you want, I can set you up with a beta copy, I just need a valid email address.
Bob - thanks for your quick reply. I would definitely like to give the CM beta copy a try. Please forward to binto100@yahoo.com.
Once it's programmed, FSUIPC should recognize it when the map is active, so you can use FSUIPC to assign functions to it if you want.
It this is using the new CM beta or for the new & existing? If it's for both then that means as long as CM is running with an active map then the MFP will show?
Bruce
-
I am mighty new to all of this.
I have a registered copy of FSUIPC V4.28 and am just starting to get my feet wet.
Is it possible to program/use the CH Mulit Function Panel in FSUIPC? When I go into Options & Settings in FSUIPC my three main controllers show up (CH Fighterstick, Pro Throttle & Pro Pedals) but the MFP is nowhere to be found.
Thanks.
Bruce
Exclude reversers on TQ6 Throttle configure P3Dv4 Lear 45
in FSUIPC Support Pete Dowson Modules
Posted
Worked perfectly. Thank you very much!