Jump to content
The simFlight Network Forums

ulisses

Members
 View Profile  See their activity

  • Posts

    73

  • Joined

  • Last visited

 Content Type 

Posts posted by ulisses

  2. delays between aerosoft devices and magenta

    in FSUIPC Support Pete Dowson Modules

    Posted

    Pete,

    The aerosoft delay is gone, magenta always respond as I touch the buttons, but....(there is always a but):

    I'm getting some stutters in PFD, I'm pretty sure it is not related to the change you made, the change helped a lot in communication.

    Everytime I start a new flight everything work fine, after sometime flying I start to get stutters (fast pauses) in magenta PFD, if I pause FS, wait some seconds and release it comes back to normal. Sometimes it comes back to normal by itself (after some minutes)

    I'll try to move only the aerosoft software to a new client with your new wideclient.ini, but if you have any suggestion please tell me.

    Thanks !

  8. crossfeed and fuel transfer

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi,

    In the controls list there are:

    Cross_feed_off

    Cross_feed_left_to_right

    Cross_feed_right_to_left

    Cross_feed_open

    Cross_feed_toggle

    Set_Fuel_tranfer_aft

    Set_Fuel_tranfer_auto

    Set_Fuel_tranfer_forward

    Set_Fuel_tranfer_off

    I'm simulating a boeing 737 and I can't make these controls to work, do I need a special panel ?

    Fuel selectors (left, center, right) work fine.

    Any tip in how to work with Fuel Transfers in FS ?

    Thanks,

  9. delays between aerosoft devices and magenta

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hello,

    here is the situation:

    Server running FS2004, WideFS and FSUIPC only.

    Client one running PM PFD/ND, PM MCP and Aerosoft MCP software.

    The network runs TCP/IP, 100T, switcher/router, winXP in all machines.

    Sometimes when I touch a button in aerosoft MCP, it has a huge delay to magenta receive it. Checking the aerosoft software there is no delay, so it is in the traffic between aerosoft software and magenta software.

    I think when aerosoft software receives a command, it sends via WideFS to the server and back to the same client for magenta MCP/ND.

    After about 15 seconds without getting the aerosoft commands, all commands I changed are updated immediatlly in magenta, like if all commands were stopped at server and sent all at once, after that it works fine for some minutes, then the delay again.

    I checked the wideclient.log and no problems. The other client works fine, PM PFD/ND work fine, my only problem is aerosoft to magenta communication.

    Any idea ? Any setting in wideclient.ini or wideserver.ini ?

    Thanks,

  19. shutdown APP problems (wideFS)

    in FSUIPC Support Pete Dowson Modules

    Posted

    Ok,

    Let's go slowly :)

    - Where do I associate the Ctrl+Shift+E for shutdown FS and clients ???

    - I'm invoking the shutdown via magenta CDU, with FS running of course.

    - I'll try the RunReady, but I'm asking something like this in WideServer;

    Run1=//client1/c/widefs/wideclient.exe

    Run2=//client2/c/widefs/wideclient.exe

    Can I add this in FSUIPC ??? Will it work ???

    Thanks again,

    Ulisses

  20. shutdown APP problems (wideFS)

    in FSUIPC Support Pete Dowson Modules

    Posted

    [Config]

    UseTCPIP=yes

    serverIPAddr=192.168.1.2

    Port=8002

    Window=163,63,568,76

    Visible=Yes

    ; -----------------------------------------------

    [user]

    Log=Errors+

    AllowShutdown=App

    Run1=C:\PMSounds\PMSounds.exe

    Run2=C:\CDU\cdu.exe

    Run3=C:\PFD\pfd.exe

    Close3=yes

    Close2=yes

    Close1=yes

    ; ===============================================

    [Config]

    UseTCPIP=yes

    serverIPAddr=192.168.1.2

    Port=8002

    Window=123,82,800,110

    Visible=Yes

    ; -----------------------------------------------

    [user]

    Log=Errors+

    AllowShutdown=App

    Run1=C:\Aerosoft MCP747\mcp747.exe

    Run2=C:\MCP\MCP.exe

    Run3=C:\PFD\pfd.exe

    Close3=yes

    Close2=yes

    Close1=yes

    FS is always running, I only start wideclient.exe and all applications start fine. I'll try the Ctrl+Shift+E

    Is there a way to start all clients when starting FS ???

    Thanks,

    Ulisses

  21. shutdown APP problems (wideFS)

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi,

    I'm using in wideclient.ini the AllowShutdown=App and it is not working all the time, not most of the time only the CDU is closed or only the wideclient.exe is closed, but the application continue running.

    Here are my 2 log files, the first log is where the shutdown request is generated by the CDU, maybe you see something wrong:

    ********* WideClient.DLL Log [version 6.10] Class=FS98MAIN *********

    Date (dmy): 31/08/03, Time 00:46:49.444: Client name is EICAS

    110 Attempting to connect now

    1042 Error on client pre-Connection Select() [Error=10061] Connection refused

    1062 Ready to try connection again

    1072 Attempting to connect now

    8713 New Client Application: "cdu" (Id=828)

    9083 New Client Application: "pfd" (Id=792)

    9414 New Client Application: "PMSounds" (Id=816)

    12759 READSTATEDATA received with bad data size!

    12759 0 ReadLocal: Offset=10000, Size=0000

    27991 WRITESTATEDATA received with bad data size!

    27991 0 ReadLocal: Offset=10013DB4, Size=0000

    39487 Connection made okay!

    71483 Note: Send() request depth is over 100!

    73306 send() done [81 bytes] after 19 retries, request depth is 168

    173229 send() done [27 bytes] after 22 retries, request depth is 2257

    183244 Shutdown request received!

    183815 send() failed [0 bytes] after 40 retries, request depth is 2454

    184596 Reception maximum achieved: 80 frames/sec, 9436 bytes/sec

    184596 Reception average achieved whilst connected: 57 frames/sec, 6889 bytes/sec

    184596 Max receive buffer = 30421, Max send depth = 2426

    184596 ********* Log file closed (Buffers: MaxUsed 2251, Alloc 11629 Freed 11629 Refused 0) *********

    ********* WideClient.DLL Log [version 6.10] Class=FS98MAIN *********

    Date (dmy): 30/08/03, Time 01:59:49.165: Client name is PFD

    90 Attempting to connect now

    1011 Error on client pre-Connection Select() [Error=10061] Connection refused

    1021 Ready to try connection again

    1061 Attempting to connect now

    3455 New Client Application: "mcp747" (Id=1720)

    7170 New Client Application: "pfd" (Id=1004)

    9634 New Client Application: "MCP" (Id=1688)

    45115 Connection made okay!

    207378 Reception maximum achieved: 59 frames/sec, 9383 bytes/sec

    207378 Reception average achieved whilst connected: 58 frames/sec, 7007 bytes/sec

    207378 Max receive buffer = 918, Max send depth = 3

    207378 ********* Log file closed (Buffers: MaxUsed 5, Alloc 29899 Freed 29899 Refused 0) *********

    Thanks,

    Ulisses

  24. goflight keysend and FSUIPC

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hello,

    I'm associating keyboard shortcuts to GoFlight P8 buttons and the same shortcut in FSUIPC to get it changing a magenta function.

    My problem is when I press the GF button sometimes the function goes On and OFF, or ON-OFF-ON, like if I pressed the key 2 or 3 times.

    Any setting to improve the communication ?

    I'll ask GoFlight as well.

    Thanks,

    Ulisses

  25. magenta offsets

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Pete,

    Enrico added a new flag in PFD.ini, it is StartElecOff=On to start all magenta eletrict OFF, cold and dark cockpit.

    Any keypress or the 0x510 offset should start up the glass cockpit, but I can't make FSUIPC PM Electric All Toggle or All ON to turn on PM displays.

    Here is a message from another guy using the same feature, maybe it helps since I don't understand so much about offsets:

    "On initial startup of GC401 with "StartElecOff=On" the 510 offset bits are

    all set to 1 *except* bit 0. Setting bit zero to 1 and then back to 0 does

    *not* restore the displays, all bits except 0 return to being 1. If I set

    *all* bits to zero then everything works 'normally', including the bit zero

    functionality."

    It is not FSUIPC, but maybe you can help me...I'd like to use FSUIPC to start the magenta GC electrics.

    Thanks,

    Ulisses

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.