Jump to content
The simFlight Network Forums

DanMorera

Members
  • Posts

    16
  • Joined

  • Last visited

Everything posted by DanMorera

  1. This is what I want to achieve with that switch, please notice that cowl 1 and 2 are showed as separate lines, I don't know how to assign 2 commands to a single key: INC_COWL_FLAPS1 (NoAccel) 462469 *** EVENT: Cntrl= 66329 (0x00010319), Param= 0 (0x00000000) INC_COWL_FLAPS1 462578 *** EVENT: Cntrl= 66329 (0x00010319), Param= 0 (0x00000000) INC_COWL_FLAPS1 463656 *** EVENT: Cntrl= 66331 (0x0001031b), Param= 0 (0x00000000) INC_COWL_FLAPS2 (NoAccel) 463750 *** EVENT: Cntrl= 66331 (0x0001031b), Param= 0 (0x00000000) INC_COWL_FLAPS2 464063 *** EVENT: Cntrl= 66331 (0x0001031b), Param= 0 (0x00000000) INC_COWL_FLAPS2 465719 *** EVENT: Cntrl= 66330 (0x0001031a), Param= 0 (0x00000000) DEC_COWL_FLAPS1 (NoAccel) 465953 *** EVENT: Cntrl= 66330 (0x0001031a), Param= 0 (0x00000000) DEC_COWL_FLAPS1 466188 *** EVENT: Cntrl= 66330 (0x0001031a), Param= 0 (0x00000000) DEC_COWL_FLAPS1 467594 *** EVENT: Cntrl= 66332 (0x0001031c), Param= 0 (0x00000000) DEC_COWL_FLAPS2 (NoAccel) 467672 *** EVENT: Cntrl= 66332 (0x0001031c), Param= 0 (0x00000000) DEC_COWL_FLAPS2 467906 *** EVENT: Cntrl= 66332 (0x0001031c), Param= 0 (0x00000000) DEC_COWL_FLAPS2 468547 *** EVENT: Cntrl= 66416 (0x00010370), Param= 180 (0x000000b4) This is what happens if I use the switch as it is now, meaning this is what happens when it opens and closes just the left cowl flap 1090813 JoystickValues joynum=0, dwCount=1, data[2]={000000ca 020003cf} 1091328 JoystickValues joynum=0, dwCount=1, data[2]={000000ca 020203cf} 1093453 KEYDOWN: VK=18, Waiting=0, Repeat=N, Shifts=4 1093453 .. Key not programmed -- passed on to FS 1093610 KEYUP: VK=18, Waiting=0 1098922 HotKey entry at 3210, VK=255, Shifts=255, Flags=0, Result=0 1127766 WRITE0 3210, 2 bytes: FF FF
  2. I'm very sorry about the confusion. I need to assign to a single straight latching toggle switch (on/off), the cowl flaps for Engine 1 and the Engine2. I cleaned it up, so now it looks like this: [buttons.Douglas A26] 0=P1,0,C65907,0 2=P202,26,C66079,0 4=P1,1,K120,8 5=P202,1,C66079,0 6=H202,2,K69,10 7=P202,7,C66336,0 8=P202,25,K69,10 What should the INI look like in order to control both cowls with the single switch? (both open and close) And thank you so much for your help and patience, Dan
  3. Do you mean like this? (sorry I'm still learning) 10=R202,17,C66244,5 11=R202,17,C66244,5 12=R202,17,C66244,5 13=U202,17,C66243,5 14=U202,17,C66243,5 15=U202,17,C66243,5 16=U202,17,C66243,5 What about the problem with the gear down on multi engine planes?
  4. The problem with the cowl flaps is that with twin engine planes, the open and close switch only does it for the left engine. And with the gear switch on multi engine planes the gear down position does not work, only the gear up one.
  5. Yes definitely can't control the cowl flaps on both engines at the same time. And can't control gear up down on multi engine planes.
  6. Update. Went back to this version: FSUIPC version 3.865 http://fsuipc.simflight.com/beta/FSUIPC3865.zip With this driver: GFdev.dll for GoFlight users (FS2004 or FSX) http://fsuipc.simflight.com/beta/GFdevDLL.zip Results: Light Swithches Name On Off Landing 11 none Taxi 10 none Strobe 9 none NAV 8 none Beacon 7 none Panel 6 none Open Close Cowl Flap none 17 Up Down Flaps 19 18 Gear 16 none BAT 0 none ALT 1 none Avionics 2 none Fuel Pump 3 none Carb heat 4 none Pitot Heat 5 none Off 21 L 22 R 23 Both 24 Start 25 Would it be possible to add a number for Cowl Flaps Open and for gear down? Those would be very very useful. As it will allow for multi engine planes to be set up with the SECM.
  7. Installed this driver and we are now back to square 1 - GFdev.dll for GoFlight users (FS2004 or FSX) http://fsuipc.simflight.com/beta/GFdevDLL.zip Things looked better with the previous driver. This is what I got now: Light Swithches Name On Off Landing none none Taxi none none Strobe none none NAV none none Beacon none none Panel none none Open Close Cowl Flap none 24 Up Down Flaps 17 16 Gear 8 none BAT none ALT none Avionics none Fuel Pump none Carb heat none Pitot Heat none Off 0 L 1 R 0 Both 2 Start 0
  8. here is goes, it looks a lot better, still some nones and the gear down shows 1 and 23. Light Swithches Name On Off Landing 9 none Taxi 11 none Strobe 13 none NAV 15 none Beacon none 17 Panel none 19 Open Close Cowl Flap none 7 Up Down Flaps 0 22 Gear 1,23 none BAT 18 none ALT 16 none Avionics none 14 Fuel Pump none 12 Carb heat none 10 Pitot Heat none 8 Off 6 L 5 R 4 Both 3 Start 2
  9. Here they are Mr Dowson (see attached) I think there is something wrong, I get multiple buttons with the same number, some of them give me 3 different numbers if I test them multiple times. This confuses FS9. Let me see how this looks: Light Swithches Name On Off Landing none none Taxi none none Strobe none none NAV none none Beacon 19 none Panel none none Open Close Cowl Flap none none Up Down Flaps 31 30 Gear 30 28 BAT none none ALT 18 none Avionics none none Fuel Pump none none Carb heat none none Pitot Heat none 16 Off none none L 22 none R none none Both 22 30 none Start 22 26 30 none Thanks again Dan
  10. Thank you for the update Mr Dowson. I can report that FSUIPC now recognizes the SECM as joystick 202. And I was able to program both positions of the gear up/down switch. Also was able to program the engine start features on the module. Now the "problems" : It won't pick up or recognize the cowl flap switch (no number shows up when flipped), same with the light switches but these are no big deal since they work with all planes just fine as lights, if I was to program something else then it doesn't work. Same with the switches on the upper side, Master, Avionics, Fuel Pump, Pitot Heat etc. I could only get 3 responses from FSUIPC with 3 those switches (lights, the ones on top) the button numbers were 16,18,19. Thank you for helping us with this , I really appreciate it, the gear up and down was a great help, if you could fix the cowl flaps I think it would be great! Thanks Again Dan
  11. Hi, I recently bought the GoFlight Single Engine Control Module SECM, I tried to assigned a few functions using FSUIPC, but when I go to the Buttons + Switches menu and I move the switch I want (or any other switch on that module) FSUIPC doesn't do anything. It like it does not detect that module. Any help will be appreciated. Thanks Dan
  12. Right on the money sir, deleted my INI created a new one just copied my old button lists and calibrations. And now it works perfect Thank you again Mr Dowson, Dan
  13. OK here we go every time I start FS and start a flight this is how my calibration page 2 looks like, and my brakes will do crazy until I click reset and accept (yellow arrows) when it looks like the second pic everything is ok: (but I keep having to click reset every time I open FS) So is my best shot to delete the .cfg? Thanks again Dan
  14. You are right, my issue is with Left Break ad Right Brake, I can't get FSUIPC to remain reset (no min or max value) It always comes back to having some values. Where can I find the FSUIPC INI file? So I can delete it, or change it if that is possible (where is are the values for the breakes kept?) Thank you Mr Dowson in advance for your help Dan
  15. I tried calibrating max and minimum with the FSUIPC but I couldn't get my rudder to stay centered. So I reseted the calibration and calibrated with CH software. Remember that on the calibration tab there are something like 11 subgroups that you can calibrate? The second one of those is what I mean by step 2. Thank you sir, as soon as I get home I'll take some screenshots and a better explanation. And thanks for your patience. Dan
  16. For some reason a couple of weeks ago my FSUIPC started doing something weird. I calibrate my CH pro pedals using the CH software and it has worked fine always. I have not changed the calibration on FSUIPC because it was not necessary to me (it worked ok) Now every time I start a flight I have to go to FSUIPC go to the "Step 2" of the calibration tab and click on reset for both brake/rudder to make those entries 0, save and close it. Now my plane works find. Next time I open FS I have to do the same thing all over again. Any ideas on how to fix this? NOTE: I'm at the office so I don't remember it Step 2 on the right side is brakes or rudder can't remember, I can tell you that my pedals act all screwed up until I reset that section. Thanks Dan
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.