DaveAB

Hi Pete, I tried this as there were many Lvars listed for the PMDG but the one I tried "L:MCP_ALT_Knob_var = 0.000000" didnt show any value (was set to 10,000ft) and didn't do anything when I tried to manipulate it. Wasn't sure if I had to specify a specific module. Anyway after many attempts I manage to FINALLY increase and decrease the altitude by 500 ft per click which is much more useable. I had to use alternate button click and wheel so it didnt get into the acceleration routine. The only problme is if you wind the knob too fast you may only get 300 ft instead of 500ft but if done at a steady pace this works well. Here is my macro file for the benefit of other budding cockpit builders :D [Macros] Module="PMDG_747400_Main.DLL" 1=decrease 1.1=RX3880*X5300,29 1.2=RX3880*X5300,13 1.3=RX3880*X5300,29 1.4=RX3880*X5300,13 1.5=RX3880*X5300,29 2=increase 2.1=RX3880*X5300,14 2.2=RX3880*X5300,31 2.3=RX3880*X5300,14 2.4=RX3880*X5300,31 2.5=RX3880*X5300,14 kind regards and thanks for your patience Dave

Yes Pete, many thanks. I have a combo I can live with. Still need to play with the "Local gauge named variables" . cheers Dave

Sorry, you are right, I mis-typed it but the assumption isn't right. What I actually meant to type was... 1 line =100,2 lines =300, 3 lines =600, 4 lines = 1000 and 5 lines = 1,500 Which ever line it is seems to add that number of clicks eg 2nd line adds 200, 3rd line adds 300, 4th adds 400 and so on. Thinking about it a three position switch "momentary,off,momentary" would work better. I would just need to add an additional switch for "set". Pity, the encoders are nice.. Yes it is.. Back to the manuals... :D cheers Dave

Ok, I understand now. I cut and pasted the lines from your post. PMDG does not respond as expected. For each click I now got a decrease of 1,500ft. I did some debugging and this is what I have found. With one line ie 1=decrease 1.1=RX3880*X5300 It decreases 100ft, as expected and as before. With the following 1=decrease 1.1=RX3880*X5300 1.2=RX3880*X5300 It decreases 300ft ! for every line after it adds 100foot . One line =100ft, 2lines = 200ft, 3 lines = 300ft and so forth up to 1,500ft for 5 lines. A log from FSUIPC shows it working perfectly (example below for 5 lines) and I would have expected only 5 simulated mouse clicks (not 15!) 196953 [buttons.PMDG - 747-400 GE CF6 Engines] 54=P0,0,CM3:1,0 196953 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 196953 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 196953 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 196953 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 196953 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 197031 Button changed: bRef=0, Joy=0, Btn=0, Released 199703 Button changed: bRef=0, Joy=0, Btn=0, Pressed 199703 [buttons.PMDG - 747-400 GE CF6 Engines] 54=P0,0,CM3:1,0 199703 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 199703 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 199703 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 199703 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 199703 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 199781 Button changed: bRef=0, Joy=0, Btn=0, Released 202593 Button changed: bRef=0, Joy=0, Btn=0, Pressed 202593 [buttons.PMDG - 747-400 GE CF6 Engines] 54=P0,0,CM3:1,0 202593 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 202593 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 202593 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 202593 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 202593 Macro: mouse action="PMDG_747400_Main.DLL":X3880*X5300 202672 Button changed: bRef=0, Joy=0, Btn=0, Released And you can see I do not have anything assigned when the button is released (BTW Leo Bodmars utility takes care of the encoder binary switching and gives a pulse for every click) Looks like I will have to put up with winding the encoder :( cheers and many thanks for your help Dave

Hi Phillip/Pete, many thanks for this. I was struggling trying to do the same thing with the same results and eventually abandoned attempts. We all know PMDG is not "cockpit builder friendly" but it is superb and combined with Pete's FSUIPC, makes this one of the best. Many thanks again Pete, release 4.505 sorts this out perfectly. :D Cheers Dave

Hi Pete, This sounds exactly what I need BUT I think I have a problem understanding the multiline macro In my INI file I have this 54=P0,0,CM3:1,0 ( Switch 0,contoller 0, macro 3, entry 1... is this correct?) [MacroFiles] 1=fuel cntrl 1 2=PMDG 3=altitude I made a macro under heading "Altitude" and sub heading "decrease". I only created this one to test the process. In my "altitude" macro file I did this [Macros] Module="PMDG_747400_Main.DLL" 1=decrease=RX3880*X5300 (was just this line. I assume the default is left click or 29, I added the following 4) 1.1=RX3880*X5300 1.2=RX3880*X5300 1.3=RX3880*X5300 1.4=RX3880*X5300 I restarted FSX and I still only get 100ft decrement for one click. Do I need to add "decrease" to these lines, or have I really missed the "big picture" here? :? cheers Dave

Yes it is!.. PMDG has no option for fast inc or dec. Holding down the mouse button the gauge inc and dec very quickly as does holding down the key combo. If we could issue 5 keyboard commands per click of the encoder that would do it and I dont think it will overflow the buffer as holding the key combo doesn't. Anyway I dont want to burden you with that one. I will put up with it. By the way the mouse macro worked but only issues one command per detent of the encoder , so exactly the same as the key combo. many thanks for all your help, much appreciated. cheers Dave

Hi Pete, you were right,right and right! :D Removing the DLL left me with all the strange "features". I eventually tracked them down. I had been looking at all the controllers on the USB ports that they are currently on and had removed ALL assignments. I did not check the BU0836X as I had only assigned the encoders and no other switches, or so I thought :oops: . I had changed around my USB ports and what is now evident is that the FS assignments that were originally on that USB port (was the CH yoke) were then applied to the BU0836X which is now plugged in there. Something I will remember in future. It is working 100% now. Many thanks for your help and congrats for a superb piece of software. ps is there a way to "speed up" the altitude encoder? It takes many turns to change 10,000ft. It would be nice if I could change 1,000 ft or even 500 ft per click instead of 100ft kind regards Dave

Hi Pete, many thanks for your reply. By "pulses" I mean that turning the encode anticlockwise I get switch 1 pulsing as I turn as if you are repeatedly pressing a button and clockwise I get switch 2 pulsing as I turn. I have tried finding anywhere these are assigned other than FSUIPC but have not found any. More confusing is I assigned CNTRL+TAB+E to "heading increase" and CNTRL+TAB+D to "heading decrease". When I turn the heading increase (clockwise) the flaps roll out (one detent of the encoder =one flap position) until flaps are fully deployed. Meanwhile the heading is increasing correctly. Anticlockwise retracts the flaps until zero and all the time is decreasing the heading. How mad is that!!!! :? Anyway, I will download 4.50 and go thru all the settings again. I will also try using a switch on the CH Yoke to do he same thing and see if I get the same results. I will inform you as to progress and try and debug this as much as possible.. kind regards Dave

Hi all, my name is Dave living in Cape Town South Africa and have just joined the forums. I have a problem mapping keyboard commands for PMDG 747X in FSUIPC which I hope you can assist me with. I built an MCP using CTS288 encoders for the "speed" , 'heading" and "altitude" and Leo Bodmar's BU0836X. I assigned the encoders using Leo's utility and under Windows (game controllers) I see pulses when turning the knobs both ways and all seems to be correct. For the 'Altitude" (let me just discuss this one although others give similar problems) I assign the key strokes CNTRL+TAB+Q for "decrease altitude" and CNTRL+TAB+A for 'increase altitude"in both PMDG keyboard assigments and FSUIPC. When using the keyboard the altitude works as expected for both directions . When I turn the encoder anticlockwise to decrease the altitude , it does this but also flashes "brakes". When I turn this clockwise to increase altitude the "views" cycle as if "View (next catagory)" has been pushed. It also increments the altitude at the same time.I can find no other assignments using CNTRL+TAB+ (x) in any other controller. I have tried other combinations of "CNTRL+TAB" but get exactly the same results. I decided on this combination as it was the most "least used" in FS itself. The version of FSUIPC is 4.40. Controllers are CH yoke, CH pedals and BU0836X. kind regards Dave