[well im confused]

im trying to update from 8.3 to 8.5, and when i tried to run the data base it will hang at 82% and stay there , its tring to read 0203 obx23250 bgl.

what am i doing wrong, this is a registered copy that i have owned for about three months.

thanks......................Robert

[scroll bar]

hello peter i have just to say that i finally went to Fsx and its is great, but there are some things that i have noticed or perhaps its just the sim.

on fs9 when ever i loaded say active sky , or radar contac it would scroll acroos the top to advise me , but for some reason it is not doing this , im sure there is somthing im missing or perhaps its the other applications thats the cause.

i believe i have every thing checked marked that needs to be in your set up section.

Thanks...Robert

[fsuipc amd widefs]

your right as usual peter got it up and running.

Robert

[fsuipc amd widefs]

im sorry Peter i did read , but did not quite understand it.

i ran the exe and then looked in the module folder and it was there , i also loaded the sim and found the add ons , opened it up and there was fsuipc.

it is also registered to me and so is widefs, also it says diaable widefs, and i believe that means it is enabled.

so far i believe it is set up correct.

where i get confused is do i put the wide client s modules in the secondaery com just like fs9. i did that on the second computer and put them in the folder . and i started it up and it says it is waiting for a connection.

everything appears to be correct.

......Thanks

[fsuipc amd widefs]

hello peter i have upgraded from fs9 to fsx and i believe i did everything correct.

fsuipc shows up in the sim ,

i installed exe. and i see it in the module section , i also put the widefs server and ini file into the module and loaded the widefs client and ini file onto the other pc.

had no problems with fs9 working , but im a little lost on why FSX is not responding.

do i need to add something in the ini config section like i did with fs9 . will i need to add the ip address below tje config section of the client ini.

thanks....Robert

[wide fs 6.78]

hello peter im migrating over to fsx and will be downloading your module fsuipc4 and im wanting to know will widefs 6.78 that i have for fs9 work with fsuipc4,

thanks.................................Robert

[keys]

yes peter im embarrassed, my email address was wrong at the back end , it was .com instead of .net.

you have a lot of patients and im thankful for that. all is well and have a great day.........Robert

[keys]

im sorry , what i mean is that i cannot register it.

the keys that i got when i bought the software does not work and i have used it it before many times.

for some reason it will not accept it.

for both fsuipc and wide view.

the current software is 3.85 and i upgraded to your 3.90 and my register keys would not work , and then i decided to go back to 3.85 and it still would not work.

im sorry if i was not clear.......Thanks...Robert

[keys]

hello Peter im having a problem getting my keys to register both fsuipc and widefs, i have had these programs for several years and i have never had this problem before.

i had to reload and format my hard drive and after i reloaded everything i got to the part of putting in my keys and they will not work.

i run FS9 and i was running 3.85 and and i look on your website and saw a newer version and in put that one in 3.90 and it would not take the keys that i had, so i decided to put back in the older version and still i cannot get the keys to work.

also i noticed that the digital signature has another name in it and not yours.

im sure im not what i might be doing wrong , but im sure i put the keys in correctly, i have done it several times.

Thanks.........Robert

[level d fmc]

well it appears im getting closer to flying, i love this program and it seems it going to work well.

im trying to get the level d to see the flight plan , when i save the plan in FMC , i save it to FMC and level d.

after saving it i check to see that it got to the folder of level d.

it is in there and im wondering from this point how i find it on my FMC.

is there another step that i need to make.

i have all the other data loaded in my fmc , im just wanting to load the flight plan .

thanks ......Robert

[flight planning]

thank you for your reply, pictures are worth a thousand words and your english is just fine.

your picture showed me right away where to go and i got it working , again thank you for your help.

im new to FSC and it is going to be a great addition to my flying .

thanks........................Robert

[flight planning]

yes i believe i have .

im running FSC on another com, and i have it mapped to my main com.

what folder does it want to put the level d saved flight plans in, i have mapped it to the flightsim folder on my main com.

maybe im not understanding them on what they want.

its asking me flight plan cannot be saved because FS path unknown, please specify path in options window.

what are they talking about , the fsc or fs9.

fsc is on the second com so it should know where it is, im directing it to that folder .

Thanks......Robert

[flight planning]

hello folks i have everything set up and im running FS on another com thru a network, so far so good.

what im trying to do is get my flight plan loaded in my level d FMC.

after i create a flight plan i then generate a plan and save it, i also checked the box level d and radar contac.

i believe that is what im suppose to do, and then when i go to save it , it will ask me that i need a FS path that is unknown.

i have all my drives mapped correctly as everything else is working, so im not for sure where they are telling me to find .

i have my flightsim mapped , and the folder where the flightplans are kepted in my document folder.

bottom line im tring to get the same flihtplan in radar contact and into the level d FMC.

and also when i get this corrected how do i open the FMC to see if it worked .

Thanks.......Robert

[no connection]

Thanks for the reply and sorry for the error in your name .

im still must be doing somthing wrong .

im not for sure on work group names so i went in and set them up.

as far a work group names i name then the same on both computers. (camtech).

hers is the log on the client com.

********* WideClient Log [version 6.78] Class=FS98MAIN *********

Date (dmy): 09/02/09, Time 13:25:26.080: Client name is CAMTECH

172 Attempting to connect now

172 Trying TCP/IP host "camtech" port 8002 ...

172Okay, IP Address = 192.168.2.3

1186 Error on client pre-Connection Select() [Error=10061] Connection refused

1217 Ready to try connection again

2247 Attempting to connect now

13182 New Client Application: "AS2004" (Id=2364)

61933 Trying TCP/IP host "camtech" port 8002 ...

61933Okay, IP Address = 192.168.2.3

here is the log on the main com.

'

********* WideServer.DLL Log [version 6.78] *********

Blocksize guide = 4096 (double allowed)

Date (dmy): 09/02/09, Time 13:18:03.750: Server name is CAMTECH

86906 Initialising TCP/IP server

86922 Initialising IPX/SPX server

86922 IPX/SPX socket() failed [Error=10044] Socket type not supported

86922 Failed to start IPX/SPX Server

86922 Initialising UDP/IP server

88469 Broadcasting service every 1000 mSecs

98062 Restarting service due to total lack of use

98062 Failed to start IPX/SPX Server

655797 Closing down now ...

Memory managed: Offset records: 0 alloc, 0 free

Read buffer usage: 0 alloc, 0 free, max in session: 0

Write buffer usage: 0 alloc, 0 free, max in session: 0

Throughput maximum achieved: 0 frames/sec, 0 bytes/sec

Throughput average achieved for complete session: 0 frames/sec, 0 bytes/sec

********* Log file closed *********

so at this moment im confused on where to go or what to do.

i did as your instructions said to do.

servername = camtech

protocol=TCP

that did not work so i tried the ips address.

the problem with that is im not for sure where to get that from.

Thanks again.....Robert

[no connection]

Hello Mr. Dobson it has been awhile that i have used widefs , and im having problems connecting.

first here is my log .

this is what im reading from the main computer log

******** WideServer.DLL Log [version 6.78] *********

Blocksize guide = 4096 (double allowed)

Date (dmy): 09/02/09, Time 09:55:29.281: Server name is THERMALTAKE

85562 Initialising TCP/IP server

85578 Initialising IPX/SPX server

85578 IPX/SPX socket() failed [Error=10044] Socket type not supported

85578 Failed to start IPX/SPX Server

85578 Initialising UDP/IP server

86234 Broadcasting service every 1000 mSecs

96922 Restarting service due to total lack of use

96922 Failed to start IPX/SPX Server

418969 Closing down now ...

Memory managed: Offset records: 0 alloc, 0 free

Read buffer usage: 0 alloc, 0 free, max in session: 0

Write buffer usage: 0 alloc, 0 free, max in session: 0

Throughput maximum achieved: 0 frames/sec, 0 bytes/sec

Throughput average achieved for complete session: 0 frames/sec, 0 bytes/sec

********* Log file closed *********

this is the log from the client computer.

********* WideClient Log [version 6.78] Class=FS98MAIN *********

Date (dmy): 09/02/09, Time 09:55:01.930: Client name is ROBERTCAMPBELL

203 Attempting to connect now

1201 Trying to locate server: Need details from Server Broadcast

1201 Failed to connect: waiting to try again

3214 Attempting to connect now

4742 New Client Application: "AS2004" (Id=3512)

67751 Trying to locate server: Need details from Server Broadcast

what do you think i need to do to get it up.

im runnig fs9 on the main com , and i have radar contact and active sky on my second computer.

what am i doing wrong......Thanks..........Robert

[fsuipc4]

im wanting to upgrade to fsx and im wondering when i get fsx capatible fsuipc4 , will i get a upgrade price or will i have to buy the full price for the fsuipc4.

just want to know before i buy , thanks.

Robert

[docking problem]

hello folks im having a problem with docking fsnav, what is happening when i dock the screen to a smaller size , the instrument panel will disapear, i will put the resized window in the upper left hand corner, and there will be no instument panel , if i move the window down to the middle of the screen half of the instument panel will appear, if i move it all the way down the screen the whole instrument panel will show up, i did a dump and reload but the samr thing happens.

can anyone help me..........................Robert

[Problem with FSUIPC]

hello out there im having a problem with FSUIPC, when i load fsmeteo from another com using widefs, fsmeteo will start and then say waiting

for FSUIPC push FLY now in FS.

to verify that i also started radar contact from another com through widefs, and it also is waiting on FSUIPC.

that tells me that there is somthing wrong with FSUIPC from my understanding.

my com has been down for about two weeks and i had to reload everything on my main com, including FSUIPC, WIDEFS, etc, the other three coms i did not have to do anything. i redownloaded the latest version of FSUIPC and WIDEFS, it is also registered.

is there somthing im missing.

Thanks.Camtech

[sound]

thanks pete and you are right , because i saw a great advantage in that also, it did feel more realistic, becase on my server i have five hundred watt klips, so i can hear the plane engines , and on the client i just hooked up my head phones and it felt like i was talking to the tower. thanks again.........................Camtech

[sound]

thanks pete and you are right , because i saw a great advantage in that also, it did feel more realistic, becase on my server i have five hundred watt klips, so i can hear the plane engines , and on the client i just hooked up my head phones and it felt like i was talking to the tower. thanks again.........................Camtech

[sound]

i have loaded radar control and flightdeck on my client, and it does work excepted for the sound and voices, does that mean i have to use speakers

from the client or is there a way to get the sound from client to server.

when i give a key command from the server it will work but no sound.

Thanks...........................Camtech

[sound]

i have loaded radar control and flightdeck on my client, and it does work excepted for the sound and voices, does that mean i have to use speakers

from the client or is there a way to get the sound from client to server.

when i give a key command from the server it will work but no sound.

Thanks...........................Camtech

[fsuipc/widefs]

thanks my friend

[fsuipc/widefs]

thanks my friend

[fsuipc/widefs]

hello folks out there im just wondering if i loaded everthing correctly i put wideserver.dll and wideserver.ini in the flight sim folder on the server and then in the modules folder.

then on the client i put the wideclient.exe and wideclient.ini in a folder that i renamed, the question is where do i put the folder that i renamed. also in the install directions it says if you want put in the fs utillity folder, does that mean that you have to put a copy of fsuipc on the client also.

thanks .....Camtech