Jump to content
The simFlight Network Forums

John Pettit

Members
  • Content Count

    32
  • Joined

  • Last visited

Community Reputation

0 Neutral

About John Pettit

  • Rank
    Advanced Member
  • Birthday 06/15/1946

Profile Information

  • Gender
    Male
  • Location
    England
  1. And to confirm - flight from EGLL to EGPD in Aerosoft A320 Pro: all worked just as programmed. Again, many, many thanks!
  2. Well! I think we've solved it! After doing the test above I entered the ini file, found the appropriate line under UseAxisControlsForNRZ and changed the response to Yes. I restarted P3D and loade the A320 as before. Checked the throttle assigments were still OK, they were. I then operated each throttle independently and each throttle worked as required. One small anomaly, though. The reverse actuation on Throttle 2 switch onlyoperates in tandem with Throttle 2 switch. This is actually not a problem as I wouldn't use reverse on single engine operation. I shall now go flying and report back (briefly!). An enormous thank-you toyou both - your support has been immense as has your patience. Believe me when I say it's hugely appreciated. Best wishes, John
  3. John and Pete, Regarding the dropped assignment - I don't know what else to call it. I have just rebooted my computer and started P3D. I loaded the Aerosoft A320 Pro at EGLL stand 521. The following is a step by step description of what I did and what I found: 1. Opened P3D Options>Controls>Other and checked Controllers Enabled box NOT ticked. 2. Opened FSUIPCv5 via ADDONS menu tab. 3. Opened 'Axis Assignments' to Profile A320. 4. Checked both throttle assignments independently with full throttle movement - both OK 5. Shut down P3D Will now go and change UseAxisControlsForNRZ in the ini file. I am assuming you want another test after I have made this change? We shall not be beaten! John FSUIPC5.log FSUIPC5.ini
  4. Re the above: Test repeated - throttle 2 had dropped its assignment, so was re-assigned. A full calibration of each throttle was then done. Full range was indicated and set. Engines then were both started. Once started each engine throttle was advanced about 1 inch independently to check thrust response. No respones noted. This was repeated observing Virtual Cockpit thrust lever movement. No movement noted. Here again are the relevant ini and log files. In great appreciation, John FSUIPC5.ini FSUIPC5.zip
  5. Hi John, I confirm each throttle was moved independently. In P3D I did disable all controllers by ensuring box was unticked. As an observation, when I had assigned the switches to activate reverse thrust the throttle 1 reverse worked as correctly when selected on its own. If I selected throttle 2 to activate reverse thrust on its own, it indicated REV but nothing more. Iit only worked correctly if throttle 1 was also actvated at the same time. When I go to Axis Calibration in FSUIPC5 I get full independent movement of each thrust lever axis. I will do the test again after a restart to be doubly sure. John
  6. Hi John, Some additional information: this morning I started up P3Dv4 from cold and checked the .ini file. This did not show any changes to the GUIDs which still had numeric assignments. I then accessed FSUIPC Options again and re-checked. The Alpha assigments now appeared for all hardware except the T.16000M joystick which still has numeric GUID of 1. The numeric assigments were still listed. I have attached the latest .ini file. Can I change this by manually editing the .ini file? Should I do so? In addition I assigned buttons 23 and 7 (the buttons at the rear most travel of the two throttle axes) to the function 'Throttle x Decr Small' to act as thrust reversers. This worked correctly, with reverse thrust being applied to the A320, but which also correctly cancelled the reverse thrust when throttles were moved into forward thrust position. One thought did occur - might it be worth trying to completely uninstall, then re-install FSUIPC5? FSUIPC5.ini
  7. HiJ ohn, Apologies for causing you much grief. Here are the files attached as requested, with full axis movement of those assigned to throttle 1 and throttle 2. Full calibration was checked bforehand - full movement, no erratic responses. All axes checked for duplication and none found (I had spotted the previous duplication and removed it). At each stage I exited Prepar3D and rebooted the computer. Once it had all been checkd I then did the axis check as requested after a reboot and restart of P3D. For the Yoke Quadrant throttle the maximum value of 16,383 and a minimum of -16,384 was observed. For the Throttle Quadrant throttle the maximum value of 16,384 and a minimum of -16,254 was observed. Prior to all this I had removed all axis assigments within Prepar3D and only used FSUIPC5. After all this there was no thrust response to throttle lever movement Hopefully this information will now be of use. With many thanks, John FSUIPC5.log FSUIPC5.ini
  8. I have just completed a full uninstall and clean re-install of my Aerosoft A318/A321 Professional Bundle following precisely the instructions on Aerosoft Support website 'pinned' instruction set. The problem remains exactly as before -no change. As you can imagine, this is all incredibly frustrating. I posted the problem on the Aerosoft Support forum, but no reply as yet.
  9. Hi John, Have done as requested. To be certain you have all relevant information I have included the complete previous log file in zipped format (the things I am learning to do!). I am beginning to think the problem lies in the interface between FSUIPC5 and Aerosoft A3xx Professional. When I load any other aircraft model the FSUIPC control assignments all work perfectly. Regards, John FSUIPC5.ini FSUIPC5.log FSUIPC5_previous.zip
  10. Hi John, In response toyour first e-mail above:I have deleted/removed that second axis assigment to throttle 2. Now have 1 axis on Saitek Pro Yoke quadrant (right end) assigned to Throttle 1 and the left most axis on the Saitek Throttle Quadrant assigned to Throttle 2. This gives adjacent throttle levers. The middle levers on both lever quadrants are redundant in my set-up. I tried switching assignments as in the second part of your e-mail, but, no change. Yes, I wish to have both throttles working independently. I checked theconfigurator and it showed only one axis. I edited it to show two axes, but again, no change - still no throttle functioning. I did try switching the assignments from 'Send direct to FSUIPC Calibration' to 'Send to FS as normal axis', and use the Axis Throttle<n> Set controls instead: again,no change. ??? John
  11. Hi John, I have done as requested. I confirm that P3Dv4 controls are NOT Enabled (there are no assignments for the throttle axes within P3Dv4). I have not changed anything that I am aware of since the system worked as intended. I reloaded my Aerosoft A320 Professional in P3Dv4 from a re-booted computer. The engines were running, so I ran the APU and cut both engines. I then loaded a new flight and restarted the engines on pushback. The engines started perfectly. Hardware throttle movement resulted in correct responses in the FSUIPC5 Calibration window, but NOT to the throttle response or engine instrument parameters in the Virtual Cockpit, i.e. no thrust produced. Here is the FSUIPC5.ini file: [General] UpdatedByVersion=5153 History=HQMZG41IO9WUWD9LAUN8P InitDelayDevicesToo=No PMDG737offsets=Auto PMDG747offsets=Auto PMDG777offsets=Auto Annotate=Yes UseSystemTime=No UseMidMouseBtn=Yes MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 RestoreSimcWindows=No FixMachSpeedBug=No AutoScanDevices=Yes DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=Yes SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ZapAirRange=1.50 ZapGroundRange=0.25 ZapCylinderAltDiff=0 ShortAircraftNameOk=Substring UseProfiles=Yes EnableMouseLook=No DelayedMouseLookZoom=No WideLuaGlobals=Yes AxesWrongRange=No TCASid=Flight TCASrange=40,3 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No ThreadAffinityMask=x0 LuaAffinityMask=x0 InitDelay=0 GetNearestAirports=Yes LogOptionProtect=Yes TimeForLuaClosing=2 WeatherReadFactor=2 WeatherRewriteSeconds=1 TrafficStallTime=1 InitialStallTime=10 NormalStallTime=1 LuaRerunDelay=66 ComReadLoopTime=20 ControlsListBuild=32097 Console=No ConsoleWindowTopMost=No FSVersionUsed="Lockheed Martin® Prepar3D® v4",4.5.13.32097 SimConnectUsed=4.5.0.0 LogAxes=Yes [Traffic Limiter] AirportPreference=50 PlannedAirportsPreference=50 GroundPreference=50 NearerPreference=50 TargetFrameRate=0 TrafficLimit=0 [JoyNames] AutoAssignLetters=No 0=Saitek Pro Flight Yoke 0.GUID={7A5E0AF0-5428-11EA-8004-444553540000} 1=T.16000M 1.GUID={7A65FA30-5428-11EA-8007-444553540000} 2=Saitek Pro Flight Rudder Pedals 2.GUID={7A6C14B0-5428-11EA-800D-444553540000} 3=Saitek Pro Flight Throttle Quadrant 3.GUID={7A6C14B0-5428-11EA-800E-444553540000} [JoystickCalibration] RudderBlendLowest=1 AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16384,0,512,16383 Elevator=-16256,0,512,16383 Rudder=-15932,0,0,16383 LeftBrake=-16380,16380/16 SlopeLeftBrake=4 RightBrake=-16380,16380/16 SlopeRightBrake=4 Mixture=-16380,16380 Flaps=0,16380/16 Spoilers=-16380,16380/16 Throttle1=-16384,-512,512,16383/32 Throttle2=-16384,-512,512,16255/32 [Axes] PollInterval=10 RangeRepeatRate=10 [Buttons] PollInterval=25 ButtonRepeat=20,10 [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No [GPSout2] GPSoutEnabled=No [WideServer] WideFSenabled=Yes [Sounds] Path=C:\Prepar3D\Sound\ Device1=Primary Sound Driver Device2=Speakers (2- High Definition Audio Device) Device3=Digital Audio (S/PDIF) (2- High Definition Audio Device) Device4=Headset Earphone (Microsoft LifeChat LX-3000) Device5=U28E590 (3- NVIDIA High Definition Audio) [Profile.A320] 1=Aerosoft A319 professional BRITISH AIRWAYS G-DBCF 2=Aerosoft A320 professional BRITISH AIRWAYS G-EUUU 3=Aerosoft A321 professional BRITISH AIRWAYS G-EUXG [Axes.A320] RangeRepeatRate=10 0=0Z,256,D,22,0,0,0 -{ DIRECT: Spoilers }- 1=0V,256,D,9,0,0,0 -{ DIRECT: Throttle1 }- 2=1X,256,D,1,0,0,0 -{ DIRECT: Aileron }- 3=1Y,256,D,2,0,0,0 -{ DIRECT: Elevator }- 4=1R,256,D,36,0,0,0 -{ DIRECT: SteeringTiller }- 5=2X,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 6=2Y,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 7=2R,256,D,3,0,0,0 -{ DIRECT: Rudder }- 8=3X,256,D,10,0,0,0 -{ DIRECT: Throttle2 }- 9=3Y,256,D,10,0,0,0 -{ DIRECT: Throttle2 }- 10=3Z,256,D,23,0,0,0 -{ DIRECT: Flaps }- [Profile.RealAir C172sp Skyhawk] 1=RealAir Cessna Skyhawk 172SP British Airways Flying Club [Axes.RealAir C172sp Skyhawk] RangeRepeatRate=10 0=0X,256,D,1,0,0,0 -{ DIRECT: Aileron }- 1=0Y,256,D,2,0,0,0 -{ DIRECT: Elevator }- 2=0Z,256,D,4,0,0,0 -{ DIRECT: Throttle }- 3=0U,256,D,6,0,0,0 -{ DIRECT: Mixture }- 4=2X,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 5=2Y,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 6=2R,256,D,3,0,0,0 -{ DIRECT: Rudder }- [Buttons.RealAir C172sp Skyhawk] 0=R0,32,C65735,0 -{PAN_DOWN}- 1=R0,36,C65734,0 -{PAN_UP}- 2=R0,34,C65672,0 -{PAN_RIGHT}- 3=R0,3,C65615,0 -{ELEV_TRIM_UP}- 4=R0,2,C65607,0 -{ELEV_TRIM_DN}- 5=P0,1,C65791,0 -{AUTOPILOT_OFF}- [Buttons.A320] 0=R1,32,C65735,0 -{PAN_DOWN}- 1=R1,2,C65615,0 -{ELEV_TRIM_UP}- 2=R1,3,C65607,0 -{ELEV_TRIM_DN}- 4=R1,36,C65734,0 -{PAN_UP}- 5=R1,38,C65671,0 -{PAN_LEFT}- 6=R1,34,C65672,0 -{PAN_RIGHT}- 7=P0,1,C65791,0 -{AUTOPILOT_OFF}- 8=P0,15,C66080,0 -{GEAR_DOWN}- 9=P0,14,C66079,0 -{GEAR_UP}- [JoystickCalibration.A320] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 RudderBlendLowest=1 Aileron=-16384,0,512,16383 Elevator=-16256,0,512,16383 Rudder=-15932,0,0,16383 Mixture=-16380,16380 LeftBrake=-16380,16380/16 SlopeLeftBrake=4 RightBrake=-16380,16380/16 SlopeRightBrake=4 Spoilers=-16380,16380/16 Flaps=0,16380/16 Throttle1=-16384,-512,512,16383/32 Throttle2=-16254,-512,512,16255/32 [Profile.Beech Be58 Baron] 1=Beech Baron 58 BAV Flying Club G-BAVB [Axes.Beech Be58 Baron] RangeRepeatRate=10 0=0X,256,D,1,0,0,0 -{ DIRECT: Aileron }- 1=0Y,256,D,2,0,0,0 -{ DIRECT: Elevator }- 2=0Z,256,D,9,0,0,0 -{ DIRECT: Throttle1 }- 3=0U,256,D,10,0,0,0 -{ DIRECT: Throttle2 }- 4=0V,256,D,17,0,0,0 -{ DIRECT: PropPitch1 }- 5=2R,256,D,3,0,0,0 -{ DIRECT: Rudder }- 6=3X,256,D,18,0,0,0 -{ DIRECT: PropPitch2 }- 7=3Y,256,D,13,0,0,0 -{ DIRECT: Mixture1 }- 8=3Z,256,D,14,0,0,0 -{ DIRECT: Mixture2 }- [Buttons.Beech Be58 Baron] 0=R0,32,C65735,0 -{PAN_DOWN}- 1=R0,2,C65607,0 -{ELEV_TRIM_DN}- 2=R0,3,C65615,0 -{ELEV_TRIM_UP}- 3=R0,6,C66278,0 -{RUDDER_TRIM_LEFT}- 4=R0,7,C66279,0 -{RUDDER_TRIM_RIGHT}- 5=R0,36,C65734,0 -{PAN_UP}- 6=R0,34,C65672,0 -{PAN_RIGHT}- 7=R1,38,C65671,0 -{PAN_LEFT}- Here is the FSUIPC.1.log : ********* FSUIPC5, Version 5.153 (12th December 2019) by Pete & John Dowson ********* Running inside Prepar3D v4 Module base=7FFB58CB0000 Windows 10 Home 64 Bit reported as Build 18363, Release ID: 1909 (OS 10.0) Prepar3D.exe version = 4.5.13.32097 Reading options from "C:\Prepar3D\Modules\FSUIPC5.ini" Checking the Registrations now ... User Name="JohnPettit" User Addr="xxxxxxx@xxxxxxx" FSUIPC5 Key is provided WIDEFS7 not user registered, or expired 16 System time = 27/02/2020 13:51:31 16 FLT path = "C:\Users\John\Documents\Prepar3D v4 Files\" 16 Using DialogMode 32 FS path = "C:\Prepar3D\" 110 ---------------------- Joystick Device Scan ----------------------- 110 Product= Saitek Pro Flight Yoke 110 Manufacturer= Saitek 110 Vendor=06A3, Product=0BAC (Version 3.4) 157 GUIDs returned for product: VID_06A3&PID_0BAC: 157 GUID= {7A5E0AF0-5428-11EA-8004-444553540000} 157 Details: Btns=23, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U255,V255,X1023,Y1023,Z255 157 Product= T.16000M 157 Manufacturer= Thrustmaster 157 Vendor=044F, Product=B10A (Version 5.0) 157 GUIDs returned for product: VID_044F&PID_B10A: 157 GUID= {7A65FA30-5428-11EA-8007-444553540000} 157 Details: Btns=16, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R255,U0,V0,X16383,Y16383,Z255 157 Product= Saitek Pro Flight Rudder Pedals 157 Manufacturer= Saitek 157 Vendor=06A3, Product=0763 (Version 1.0) 157 GUIDs returned for product: VID_06A3&PID_0763: 157 GUID= {7A6C14B0-5428-11EA-800D-444553540000} 157 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0 172 Product= Saitek Pro Flight Quadrant 172 Manufacturer= Saitek 172 Vendor=06A3, Product=0C2D (Version 2.0) 172 GUIDs returned for product: VID_06A3&PID_0C2D: 172 GUID= {7A6C14B0-5428-11EA-800E-444553540000} 172 Details: Btns=9, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X255,Y255,Z255 172 ------------------------------------------------------------------- 172 Device acquired for use: 172 Joystick ID = 0 (Registry okay) 172 0=Saitek Pro Flight Yoke 172 0.GUID={7A5E0AF0-5428-11EA-8004-444553540000} 172 Device acquired for use: 172 Joystick ID = 1 (Registry okay) 172 1=T.16000M 172 1.GUID={7A65FA30-5428-11EA-8007-444553540000} 172 Device acquired for use: 172 Joystick ID = 2 (Registry okay) 172 2=Saitek Pro Flight Rudder Pedals 172 2.GUID={7A6C14B0-5428-11EA-800D-444553540000} 172 Device acquired for use: 172 Joystick ID = 3 (Registry okay) 172 3=Saitek Pro Flight Throttle Quadrant 172 3.GUID={7A6C14B0-5428-11EA-800E-444553540000} 172 ------------------------------------------------------------------- 203 LogOptions=00000000 00000001 203 ------------------------------------------------------------------- 203 SimConnect_Open succeeded: waiting to check version okay 203 Opened separate AI Traffic client okay 13110 Running in "Lockheed Martin® Prepar3D® v4", Version: 4.5.13.32097 (SimConnect: 4.5.0.0) 13110 Initialising SimConnect data requests now 13110 FSUIPC Menu entry added 13110 ... Using Prepar3D with Professional License 13125 C:\Users\John\AppData\Local\Lockheed Martin\Prepar3D v4\Prepar3D_Default.fxml 13125 C:\Prepar3D\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air 65516 C:\Users\John\Documents\Aerosoft\Aerosoft A320-A321 Professional\SimObjects\Airplanes\Aerosoft A320 IAE Professional\A320.air 65532 ### The user object is 'Aerosoft A320 professional BRITISH AIRWAYS G-EUUU' 65532 ### Mode is NORMAL 66078 ### Mode: PAUSE on 130360 Aircraft loaded: running normally now ... 130469 User Aircraft ID 2 supplied, now being used 131250 System time = 27/02/2020 13:53:42, Simulator time = 13:51:43 (13:51Z) 131250 Aircraft="Aerosoft A320 professional BRITISH AIRWAYS G-EUUU" 152063 Loading Complete ... 152063 ### Mode is NORMAL 154188 -------------------- Starting everything now ---------------------- 154250 Exception 25 "ILLEGAL_OPERATION", Ref 735, Index param -1 on read AddData for "CG PERCENT LATERAL" 154250 Exception 25 "ILLEGAL_OPERATION", Ref 736, Index param -1 on read AddData for "AVIONICS MASTER SWITCH" 154250 ASN active function link set 154250 Ready for ActiveSky WX radar with additional data 154282 Exception 25 "ILLEGAL_OPERATION", Ref 762, Index param -1 on read AddData for "BARBER POLE MACH" 154282 Exception 25 "ILLEGAL_OPERATION", Ref 763, Index param -1 on read AddData for "FUEL SELECTED TRANSFER MODE" 154313 Exception 25 "ILLEGAL_OPERATION", Ref 764, Index param -1 on read AddData for "HYDRAULIC SYSTEM INTEGRITY" 154313 Exception 25 "ILLEGAL_OPERATION", Ref 765, Index param -1 on read AddData for "ATTITUDE CAGE" 154344 Exception 25 "ILLEGAL_OPERATION", Ref 791, Index param -1 on read AddData for "VELOCITY BODY X" 154344 Exception 25 "ILLEGAL_OPERATION", Ref 792, Index param -1 on read AddData for "VELOCITY BODY Y" 154375 Exception 25 "ILLEGAL_OPERATION", Ref 793, Index param -1 on read AddData for "ROTATION VELOCITY BODY X" 154375 Exception 25 "ILLEGAL_OPERATION", Ref 794, Index param -1 on read AddData for "ROTATION VELOCITY BODY Z" 154407 Exception 25 "ILLEGAL_OPERATION", Ref 820, Index param -1 on read AddData for "NAV SOUND:1" 154407 Exception 25 "ILLEGAL_OPERATION", Ref 821, Index param -1 on read AddData for "NAV SOUND:2" 154438 Exception 25 "ILLEGAL_OPERATION", Ref 822, Index param -1 on read AddData for "ADF SOUND" 154438 Exception 25 "ILLEGAL_OPERATION", Ref 823, Index param -1 on read AddData for "COM ACTIVE FREQUENCY:2" 154485 Exception 25 "ILLEGAL_OPERATION", Ref 849, Index param -1 on read AddData for "VELOCITY WORLD Y" 154485 Exception 25 "ILLEGAL_OPERATION", Ref 850, Index param -1 on read AddData for "STRUCT WORLD ROTATION VELOCITY" 154516 Exception 25 "ILLEGAL_OPERATION", Ref 851, Index param -1 on read AddData for "ACCELERATION WORLD X" 154516 Exception 25 "ILLEGAL_OPERATION", Ref 852, Index param -1 on read AddData for "ACCELERATION WORLD Y" 154547 Exception 25 "ILLEGAL_OPERATION", Ref 878, Index param -1 on read AddData for "CABIN SEATBELTS ALERT SWITCH" 154547 Exception 25 "ILLEGAL_OPERATION", Ref 879, Index param -1 on read AddData for "HYDRAULIC SWITCH:1" 154578 Exception 25 "ILLEGAL_OPERATION", Ref 880, Index param -1 on read AddData for "HYDRAULIC SWITCH:2" 154578 Exception 25 "ILLEGAL_OPERATION", Ref 881, Index param -1 on read AddData for "HYDRAULIC SWITCH:3" 154610 Exception 25 "ILLEGAL_OPERATION", Ref 907, Index param -1 on read AddData for "GENERAL ENG MAX REACHED RPM:4" 154610 Exception 25 "ILLEGAL_OPERATION", Ref 908, Index param -1 on read AddData for "ATC MODEL" 154641 Exception 25 "ILLEGAL_OPERATION", Ref 909, Index param -1 on read AddData for "IS LATITUDE LONGITUDE FREEZE ON" 154641 Exception 25 "ILLEGAL_OPERATION", Ref 910, Index param -1 on read AddData for "ATTITUDE BARS POSITION" 154672 Exception 25 "ILLEGAL_OPERATION", Ref 936, Index param -1 on read AddData for "RECIP ENG FUEL AVAILABLE:4" 154672 Exception 25 "ILLEGAL_OPERATION", Ref 937, Index param -1 on read AddData for "RECIP ENG MANIFOLD PRESSURE:3" 154703 Exception 25 "ILLEGAL_OPERATION", Ref 938, Index param -1 on read AddData for "RECIP ENG COWL FLAP POSITION:3" 154703 Exception 25 "ILLEGAL_OPERATION", Ref 939, Index param -1 on read AddData for "RECIP ENG ALTERNATE AIR POSITION:3" 154735 Exception 25 "ILLEGAL_OPERATION", Ref 965, Index param -1 on read AddData for "RECIP ENG RIGHT MAGNETO:2" 154735 Exception 25 "ILLEGAL_OPERATION", Ref 966, Index param -1 on read AddData for "RECIP MIXTURE RATIO:2" 154766 Exception 25 "ILLEGAL_OPERATION", Ref 967, Index param -1 on read AddData for "RECIP ENG BRAKE POWER:2" 154766 Exception 25 "ILLEGAL_OPERATION", Ref 968, Index param -1 on read AddData for "RECIP CARBURETOR TEMPERATURE:2" 154797 Exception 25 "ILLEGAL_OPERATION", Ref 994, Index param -1 on read AddData for "RECIP ENG EMERGENCY BOOST ACTIVE:1" 154797 Exception 25 "ILLEGAL_OPERATION", Ref 995, Index param -1 on read AddData for "RECIP ENG EMERGENCY BOOST ELAPSED TIME:1" 154828 Exception 25 "ILLEGAL_OPERATION", Ref 996, Index param -1 on read AddData for "RECIP ENG WASTEGATE POSITION:1" 154828 Exception 25 "ILLEGAL_OPERATION", Ref 997, Index param -1 on read AddData for "RECIP ENG TURBINE INLET TEMPERATURE:1" 154875 Exception 25 "ILLEGAL_OPERATION", Ref 1023, Index param -1 on read AddData for "GENERAL ENG EXHAUST GAS TEMPERATURE:3" 154875 Exception 25 "ILLEGAL_OPERATION", Ref 1024, Index param -1 on read AddData for "GENERAL ENG GENERATOR SWITCH:3" 154907 Exception 25 "ILLEGAL_OPERATION", Ref 1025, Index param -1 on read AddData for "GENERAL ENG GENERATOR ACTIVE:3" 154907 Exception 25 "ILLEGAL_OPERATION", Ref 1026, Index param -1 on read AddData for "GENERAL ENG DAMAGE PERCENT:3" 154938 Exception 25 "ILLEGAL_OPERATION", Ref 1052, Index param -1 on read AddData for "GENERAL ENG FUEL PUMP SWITCH:1" 154938 Exception 25 "ILLEGAL_OPERATION", Ref 1053, Index param -1 on read AddData for "GENERAL ENG MASTER ALTERNATOR:1" 154969 Exception 25 "ILLEGAL_OPERATION", Ref 1054, Index param -1 on read AddData for "TAILHOOK POSITION" 154969 Exception 25 "ILLEGAL_OPERATION", Ref 1055, Index param -1 on read AddData for "PARTIAL PANEL ADF" 155000 Exception 25 "ILLEGAL_OPERATION", Ref 1081, Index param -1 on read AddData for "GPS IS APPROACH ACTIVE" 155000 Exception 25 "ILLEGAL_OPERATION", Ref 1082, Index param -1 on read AddData for "GPS POSITION LAT" 155032 Exception 25 "ILLEGAL_OPERATION", Ref 1083, Index param -1 on read AddData for "GPS POSITION LON" 155032 Exception 25 "ILLEGAL_OPERATION", Ref 1084, Index param -1 on read AddData for "GPS POSITION ALT" 155063 Exception 25 "ILLEGAL_OPERATION", Ref 1110, Index param -1 on read AddData for "GPS APPROACH IS WP RUNWAY" 155063 Exception 25 "ILLEGAL_OPERATION", Ref 1111, Index param -1 on read AddData for "GPS COURSE TO STEER" 155094 Exception 25 "ILLEGAL_OPERATION", Ref 1112, Index param -1 on read AddData for "GPS FLIGHT PLAN WP COUNT" 155094 Exception 25 "ILLEGAL_OPERATION", Ref 1113, Index param -1 on read AddData for "GPS APPROACH WP COUNT" 155360 Advanced Weather Interface Enabled 243500 Sim stopped: average frame rate for last 91 secs = 36.7 fps 243500 Max AI traffic was 0 aircraft 243500 ------------------------------------------------------------------- [Log closed by user request, and continued in new file] 282344 System time = 27/02/2020 13:56:13, Simulator time = 13:53:14 (13:53Z) 282344 *** FSUIPC log file being closed Minimum frame rate was 30.5 fps, Maximum was 38.9 fps Average frame rate for running time of 112 secs = 37.8 fps Maximum AI traffic for session was 0 aircraft Memory managed: 45 Allocs, 43 Freed ********* FSUIPC Log file closed *********** And here is a second FSUIPC5.log file (initial part): ********* FSUIPC5, Version 5.153 (12th December 2019) by Pete & John Dowson ********* User Name="JohnPettit" User Addr="xxxxxxx@xxxxxxxx" FSUIPC5 Key is provided WIDEFS7 not user registered, or expired 282344 System time = 27/02/2020 13:56:13, Simulator time = 13:53:14 (13:53Z) 282344 FLT path = "C:\Users\John\Documents\Prepar3D v4 Files\" [Continuation log requested by user] Running inside Prepar3D v4 on Windows 10 Module base=7FFB58CB0000 282344 LogOptions changed, now 10000000 00000001 282422 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -14744 (0xffffc668) AXIS_SPOILER_SET 282422 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16 (0x00000010) THROTTLE1_SET 282422 *** AXIS: Cntrl= 65821 (0x0001011d), Param= 16 (0x00000010) THROTTLE2_SET 282453 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -14744 (0xffffc668) AXIS_SPOILER_SET 282453 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16 (0x00000010) THROTTLE1_SET 282453 *** AXIS: Cntrl= 65821 (0x0001011d), Param= 16 (0x00000010) THROTTLE2_SET 282485 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -14744 (0xffffc668) AXIS_SPOILER_SET 282485 *** AXIS: Cntrl= 65694 (0x0001009e), Param= 0 (0x00000000) ELEVATOR_SET 282485 *** AXIS: Cntrl= 65695 (0x0001009f), Param= 0 (0x00000000) AILERON_SET 282485 *** AXIS: Cntrl= 65696 (0x000100a0), Param= -13055 (0xffffcd01) RUDDER_SET 282485 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16 (0x00000010) THROTTLE1_SET 282485 *** AXIS: Cntrl= 65821 (0x0001011d), Param= 16 (0x00000010) THROTTLE2_SET 282516 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -14744 (0xffffc668) AXIS_SPOILER_SET 282516 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16 (0x00000010) THROTTLE1_SET 282516 *** AXIS: Cntrl= 65821 (0x0001011d), Param= 16 (0x00000010) THROTTLE2_SET 282516 *** AXIS: Cntrl= 65694 (0x0001009e), Param= 0 (0x00000000) ELEVATOR_SET 282516 *** AXIS: Cntrl= 65695 (0x0001009f), Param= 0 (0x00000000) AILERON_SET 282516 *** AXIS: Cntrl= 65696 (0x000100a0), Param= -13354 (0xffffcbd6) RUDDER_SET 282578 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -14744 (0xffffc668) AXIS_SPOILER_SET 282578 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16 (0x00000010) THROTTLE1_SET 282578 *** AXIS: Cntrl= 65821 (0x0001011d), Param= 16 (0x00000010) THROTTLE2_SET 282578 *** AXIS: Cntrl= 65694 (0x0001009e), Param= 0 (0x00000000) ELEVATOR_SET 282578 *** AXIS: Cntrl= 65695 (0x0001009f), Param= 0 (0x00000000) AILERON_SET 282578 *** AXIS: Cntrl= 65696 (0x000100a0), Param= -13503 (0xffffcb41) RUDDER_SET then lots of the same, finishing with: 4413797 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16055 (0xffffc149) AXIS_SPOILER_SET 4413797 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16 (0x00000010) THROTTLE1_SET 4413797 *** AXIS: Cntrl= 65821 (0x0001011d), Param= 16 (0x00000010) THROTTLE2_SET 4413813 *** AXIS: Cntrl= 65694 (0x0001009e), Param= 0 (0x00000000) ELEVATOR_SET 4413813 *** AXIS: Cntrl= 65695 (0x0001009f), Param= 0 (0x00000000) AILERON_SET 4413813 *** AXIS: Cntrl= 65696 (0x000100a0), Param= 0 (0x00000000) RUDDER_SET 4413860 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16055 (0xffffc149) AXIS_SPOILER_SET 4413860 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16 (0x00000010) THROTTLE1_SET 4413860 *** AXIS: Cntrl= 65821 (0x0001011d), Param= 16 (0x00000010) THROTTLE2_SET 4413875 *** AXIS: Cntrl= 65694 (0x0001009e), Param= 0 (0x00000000) ELEVATOR_SET 4413875 *** AXIS: Cntrl= 65695 (0x0001009f), Param= 0 (0x00000000) AILERON_SET 4413875 *** AXIS: Cntrl= 65696 (0x000100a0), Param= 0 (0x00000000) RUDDER_SET 4413907 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16055 (0xffffc149) AXIS_SPOILER_SET 4413907 *** AXIS: Cntrl= 65694 (0x0001009e), Param= 0 (0x00000000) ELEVATOR_SET 4413907 *** AXIS: Cntrl= 65695 (0x0001009f), Param= 0 (0x00000000) AILERON_SET 4413907 *** AXIS: Cntrl= 65696 (0x000100a0), Param= 0 (0x00000000) RUDDER_SET 4413907 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16 (0x00000010) THROTTLE1_SET 4413907 *** AXIS: Cntrl= 65821 (0x0001011d), Param= 16 (0x00000010) THROTTLE2_SET 4413953 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16055 (0xffffc149) AXIS_SPOILER_SET 4413953 *** AXIS: Cntrl= 65694 (0x0001009e), Param= 0 (0x00000000) ELEVATOR_SET 4413953 *** AXIS: Cntrl= 65695 (0x0001009f), Param= 0 (0x00000000) AILERON_SET 4413953 *** AXIS: Cntrl= 65696 (0x000100a0), Param= 0 (0x00000000) RUDDER_SET 4413953 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16 (0x00000010) THROTTLE1_SET 4413953 *** AXIS: Cntrl= 65821 (0x0001011d), Param= 16 (0x00000010) THROTTLE2_SET 4414016 *** AXIS: Cntrl= 65694 (0x0001009e), Param= 0 (0x00000000) ELEVATOR_SET 4414016 *** AXIS: Cntrl= 65695 (0x0001009f), Param= 0 (0x00000000) AILERON_SET 4414016 *** AXIS: Cntrl= 65696 (0x000100a0), Param= 0 (0x00000000) RUDDER_SET 4414047 *** AXIS: Cntrl= 66382 (0x0001034e), Param= -16055 (0xffffc149) AXIS_SPOILER_SET 4414047 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 16 (0x00000010) THROTTLE1_SET 4414047 *** AXIS: Cntrl= 65821 (0x0001011d), Param= 16 (0x00000010) THROTTLE2_SET This last file was 23,000+ in size, so I aslimited by file size for sending. I trust there is enough information contained within what has been sent. If not, I will break it down into smaller chunks, but a quick inspection indicated it was just repeated information. Best wishes, John
  12. Hi Pete, Currently I have a registered copy of FSUIPC5 (version 5.153) All was working well yesterday on my new flight computer. Today I had the following problem(s) when running Aerosoft A321 Professional on Prepar3Dv4.5 : After engine start the Autothrottle button illuminated green and would not disengage until restart of P3D. After re-start of P3D when engines had been started (and NO A/Throttle active green) the throttles would not function correctly, i.e. physical movement of Saitek throttles did not produce any Virtual Cockpit movement of throttles or engine RPM increase with normal movement. Oddly, if the throttles were 'pumped' back and forth, the engine rpm would slowly increase. All other axes of Saitek Pro flight controls (spoilers, flaps, rudders, toe-brakes) worked correctly according to FSUIPC assignment, as did the axes on the Thrustmaster 1600M joystick. I tried changing the aircraft model back to the Aerosoft A320 Professional which I had successfully used yesterday, but the problem persisted. Here is the FSUIPC5.log file: ********* FSUIPC5, Version 5.153 (12th December 2019) by Pete & John Dowson ********* Running inside Prepar3D v4 Module base=7FFC24BD0000 Windows 10 Home 64 Bit reported as Build 18363, Release ID: 1909 (OS 10.0) Prepar3D.exe version = 4.5.13.32097 Reading options from "C:\Prepar3D\Modules\FSUIPC5.ini" Checking the Registrations now ... User Name="JohnPettit" User Addr="xxxxxx@xxxxxxxxxx" FSUIPC5 Key is provided WIDEFS7 not user registered, or expired 0 System time = 26/02/2020 21:23:15 0 FLT path = "C:\Users\John\Documents\Prepar3D v4 Files\" 0 Using DialogMode 16 FS path = "C:\Prepar3D\" 94 ---------------------- Joystick Device Scan ----------------------- 156 Product= Saitek Pro Flight Yoke 156 Manufacturer= Saitek 156 Vendor=06A3, Product=0BAC (Version 3.4) 156 GUIDs returned for product: VID_06A3&PID_0BAC: 156 GUID= {7A5E0AF0-5428-11EA-8004-444553540000} 156 Details: Btns=23, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U255,V255,X1023,Y1023,Z255 156 Product= T.16000M 156 Manufacturer= Thrustmaster 156 Vendor=044F, Product=B10A (Version 5.0) 156 GUIDs returned for product: VID_044F&PID_B10A: 156 GUID= {7A65FA30-5428-11EA-8007-444553540000} 156 Details: Btns=16, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R255,U0,V0,X16383,Y16383,Z255 172 Product= Saitek Pro Flight Rudder Pedals 172 Manufacturer= Saitek 172 Vendor=06A3, Product=0763 (Version 1.0) 172 GUIDs returned for product: VID_06A3&PID_0763: 172 GUID= {7A6C14B0-5428-11EA-800D-444553540000} 172 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0 172 Product= Saitek Pro Flight Quadrant 172 Manufacturer= Saitek 172 Vendor=06A3, Product=0C2D (Version 2.0) 172 GUIDs returned for product: VID_06A3&PID_0C2D: 172 GUID= {7A6C14B0-5428-11EA-800E-444553540000} 172 Details: Btns=9, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X255,Y255,Z255 172 ------------------------------------------------------------------- 172 Device acquired for use: 172 Joystick ID = 0 (Registry okay) 172 0=Saitek Pro Flight Yoke 172 0.GUID={7A5E0AF0-5428-11EA-8004-444553540000} 172 Device acquired for use: 172 Joystick ID = 1 (Registry okay) 172 1=T.16000M 172 1.GUID={7A65FA30-5428-11EA-8007-444553540000} 172 Device acquired for use: 172 Joystick ID = 2 (Registry okay) 172 2=Saitek Pro Flight Rudder Pedals 172 2.GUID={7A6C14B0-5428-11EA-800D-444553540000} 172 Device acquired for use: 172 Joystick ID = 3 (Registry okay) 172 3=Saitek Pro Flight Throttle Quadrant 172 3.GUID={7A6C14B0-5428-11EA-800E-444553540000} 172 ------------------------------------------------------------------- 203 LogOptions=00000000 00000001 203 ------------------------------------------------------------------- 203 SimConnect_Open succeeded: waiting to check version okay 219 Opened separate AI Traffic client okay 9875 Running in "Lockheed Martin® Prepar3D® v4", Version: 4.5.13.32097 (SimConnect: 4.5.0.0) 9875 Initialising SimConnect data requests now 9875 FSUIPC Menu entry added 9875 ... Using Prepar3D with Professional License 9891 C:\Users\John\AppData\Local\Lockheed Martin\Prepar3D v4\Prepar3D_Default.fxml 9891 C:\Prepar3D\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air 30469 Weather Mode now = Theme 31922 C:\Users\John\Documents\Aerosoft\Aerosoft A320-A321 Professional\SimObjects\Airplanes\Aerosoft A320 IAE Professional\A320.air 31922 C:\Users\John\Documents\Prepar3D v4 Files\EGLL, A320,Stand 521, Engs OFF,APU running.fxml 39438 ### The user object is 'Aerosoft A320 professional BRITISH AIRWAYS G-EUUU' and here is the FSUIPC.JoyScan.csv file : Good?, flags, VID, PID, Name, INIid, REGid, RegEntry, INIguid, REGguid, HIDguid, ValsOK?, ReadsOk? ,,, HIDscanning completed N, x00, x06A3, x0BAC, , -1, -1, 0, {NULL}, {NULL}, {7A5E0AF0-5428-11EA-8004-444553540000}, Y, N N, x00, x044F, xB10A, , -1, -1, 0, {NULL}, {NULL}, {7A65FA30-5428-11EA-8007-444553540000}, Y, N N, x00, x06A3, x0763, , -1, -1, 0, {NULL}, {NULL}, {7A6C14B0-5428-11EA-800D-444553540000}, Y, N N, x00, x06A3, x0C2D, , -1, -1, 0, {NULL}, {NULL}, {7A6C14B0-5428-11EA-800E-444553540000}, Y, N ,,, REGscanning completed N, x00, x06A3, x0BAC, Saitek Pro Flight Yoke, -1, 0, 0, {NULL}, {7A5E0AF0-5428-11EA-8004-444553540000}, {7A5E0AF0-5428-11EA-8004-444553540000}, Y, Y N, x00, x044F, xB10A, T.16000M, -1, 1, 0, {NULL}, {7A65FA30-5428-11EA-8007-444553540000}, {7A65FA30-5428-11EA-8007-444553540000}, Y, Y N, x00, x06A3, x0763, Saitek Pro Flight Rudder Pedals, -1, 2, 0, {NULL}, {7A6C14B0-5428-11EA-800D-444553540000}, {7A6C14B0-5428-11EA-800D-444553540000}, Y, Y N, x00, x06A3, x0C2D, Saitek Pro Flight Throttle Quadrant, -1, 3, 0, {NULL}, {7A6C14B0-5428-11EA-800E-444553540000}, {7A6C14B0-5428-11EA-800E-444553540000}, Y, Y ,,, User settings imported N, x00, x06A3, x0BAC, Saitek Pro Flight Yoke, 0, 0, 0, {7A5E0AF0-5428-11EA-8004-444553540000}, {7A5E0AF0-5428-11EA-8004-444553540000}, {7A5E0AF0-5428-11EA-8004-444553540000}, Y, Y N, x00, x044F, xB10A, T.16000M, 1, 1, 0, {7A65FA30-5428-11EA-8007-444553540000}, {7A65FA30-5428-11EA-8007-444553540000}, {7A65FA30-5428-11EA-8007-444553540000}, Y, Y N, x00, x06A3, x0763, Saitek Pro Flight Rudder Pedals, 2, 2, 0, {7A6C14B0-5428-11EA-800D-444553540000}, {7A6C14B0-5428-11EA-800D-444553540000}, {7A6C14B0-5428-11EA-800D-444553540000}, Y, Y N, x00, x06A3, x0C2D, Saitek Pro Flight Throttle Quadrant, 3, 3, 0, {7A6C14B0-5428-11EA-800E-444553540000}, {7A6C14B0-5428-11EA-800E-444553540000}, {7A6C14B0-5428-11EA-800E-444553540000}, Y, Y ,,, Values matched and decided Y, x1E, x06A3, x0BAC, Saitek Pro Flight Yoke, 0, 0, 0, {7A5E0AF0-5428-11EA-8004-444553540000}, {7A5E0AF0-5428-11EA-8004-444553540000}, {7A5E0AF0-5428-11EA-8004-444553540000}, Y, Y Y, x1E, x044F, xB10A, T.16000M, 1, 1, 0, {7A65FA30-5428-11EA-8007-444553540000}, {7A65FA30-5428-11EA-8007-444553540000}, {7A65FA30-5428-11EA-8007-444553540000}, Y, Y Y, x1E, x06A3, x0763, Saitek Pro Flight Rudder Pedals, 2, 2, 0, {7A6C14B0-5428-11EA-800D-444553540000}, {7A6C14B0-5428-11EA-800D-444553540000}, {7A6C14B0-5428-11EA-800D-444553540000}, Y, Y Y, x1E, x06A3, x0C2D, Saitek Pro Flight Throttle Quadrant, 3, 3, 0, {7A6C14B0-5428-11EA-800E-444553540000}, {7A6C14B0-5428-11EA-800E-444553540000}, {7A6C14B0-5428-11EA-800E-444553540000}, Y, Y If there is any other information you require please let me know. Any and all help much appreciated, as always. I am hoping it's something simple I've missed. I just tried the controls set-up on a Beech Baron BE58 and all axes work 100% on that model as assigned within FSUIPC. John NB: I removed my e-mail address from thefiles above for obvious reasons.
  13. Thanks for the good advice! :mrgreen: I had indeed forgotten to ensure calibration was necessary. I also remembered to delete all axis assignments under basic Settings -> Controls to prevent possible interference with FSUIPC. Am now up and running with good controls.
  14. Good evening Pete, I have just had to re-load Windows 7, and thus ALL my FSX Program, add-on aircraft and add-on scenery. Don't feel sorry for me - it was all my fault! :oops: However (there had to be a 'however'!) on flying the FSX Beech Baron I thought the pitch response was mighty sensitive, one might say fierce. I tried altering the response slope via the FSUIPC calibration page and it did not seem to make much difference. I then 'flew' the Carenado Beech Baron BE58, and lo and behold I had the same problem. On accessing the pitch calibration page I noticed an anomaly. When moving the yoke forwards the response varied according to the slope set, and reached the maximum set number of about 16,400 at full yoke movement. However, when pulling the yoke backwards the response was far more rapid, and reached the similar maximum set number of about 16,400 after only one third of the yoke movement from neutral to maximum. This reflected exactly what the pitch response was when 'flying' the simulated aircraft. I suspect this means there is a problem with the sensors inside my Saitek Pro yoke, but I would be grateful if you could give your opinion. If indeed this is the problem, do you know if there some way I could fix it by opening up the yoke black box and cleaning contacts/pitch pots or whtever may be causing the problem? :(
  15. Thanks Pete - I was in the middle of writing that I had found that out! :cool:
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.