Jump to content
The simFlight Network Forums

tanker55

Members
  • Posts

    7
  • Joined

  • Last visited

Everything posted by tanker55

  1. Hi: I have a registered version of the most recent FSUIPC module (FSUIPC4.949k) in P3D Vers. 3.2, and I have a problem with dual CH Products Throttle Quadrants. The problem is that I program one set, but then the quadrants are switched the next time that I start up the program (i.e., the assignments for the right hand quadrant gets switched to the left hand quadrant). I did some searching for a solution, and I have changed AutoAssignLetters=No to Yes, but the switch keeps happening. It's more annoying than anything else because I keep having to assign the axises, buttons, et c for the right hand quadrant. Any suggestions. Mike Gutierrez, North Hollywood, California
  2. Hi: I have a registered version of the most recent FSUIPC module (FSUIPC4.949k) in P3D Vers. 3.2, and I have a problem with dual CH Products Throttle Quadrants. The problem is that I program one set, but then the quadrants are switched the next time that I start up the program (i.e., the assignments for the right hand quadrant gets switched to the left hand quadrant). I did some searching for a solution, and I have changed AutoAssignLetters=No to Yes, but the switch keeps happening. It's more annoying than anything else because I keep having to assign the axises, buttons, et c for the right hand quadrant. Any suggestions. Mike Gutierrez, North Hollywood, California
  3. Thanks for your prompt replies and help. I am waiting to hear a reply from A2A support. Mike Gutierrez
  4. In response to your questions: (1) A2A has a unique joystick configuration tool for each of their aircraft. The tool allows one to assign a joystick axis for unique functions in each plane. In the case of the P-47, there is boost lever that you use to adjust the amount of boost supplied by a virtual supercharger (turbocharger?). Any way, I posted this same message on the A2A website. I am pretty certain that something is going on with the A2A planes, but I thought I would check here as well. (2) The version of FSUIPC I installed is the one that is available on the FSUIPC main page (FSUIPC4 4.853). Where can I obtain the version you referenced in your post? (3) The thread I referred to in my email was started on June 30, 2012 by "abh jc 03." I've printed the page as a "pdf" file that I can send to you. (4) Tonight, I removed and reinstalled FSX acceleration again. A could again assign planes to profiles, until I loaded the B-17, and the problem started all over again. What follows is the contents of my fsuipc.ini file. If you look under the last heading labeled "Profile.Twin Engine Jet Fighter" you will see an entry for "1=" with no aircraft title following. This is my last attempt to assign a plane to this profile, but, as I noted, FSUIPC removed the check mark and would not let me assign the plane. Thanks for your help. Mike Gutierrez [General] UpdatedByVersion=4853 History=0WQHJ15Z5D6184N5AC6RE MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No DeleteVehiclesForAES=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=No UseProfiles=Yes EnableMouseLook=No AxesWrongRange=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 LuaRerunDelay=66 InitDelayDevicesToo=No MouseWheelMove=No AutoScanDevices=Yes OOMcheck=Yes Console=No FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0 SimConnectUsed=10.0.61259.0 [JoyNames] AutoAssignLetters=No 0=CH Pro Pedals USB 0.GUID={83BCBE40-FB91-11E1-8003-444553540000} 1=CH Fighterstick USB 1.GUID={83BCBE40-FB91-11E1-8004-444553540000} 2=Saitek Pro Flight Quadrant 2.GUID={E0F61150-F6E2-11E1-800E-444553540000} 3=CH Throttle Quadrant USB 3.GUID={83BCBE40-FB91-11E1-8005-444553540000} 4=CH Throttle Quadrant USB 4.GUID={83BCBE40-FB91-11E1-8006-444553540000} 5=CH Flight Sim Yoke USB 5.GUID={83BCBE40-FB91-11E1-8007-444553540000} [buttons] Buttonrepeat=20,10 1=R5,11,C65615,0 2=R5,10,C65607,0 3=R5,34,C66279,0 4=R5,38,C66278,0 5=P5,32,C65689,0 6=R5,3,C66277,0 7=R5,2,C66276,0 8=P5,36,C65686,0 9=P5,8,K83,8 10=P5,9,K65,8 11=P4,0,C66079,0 12=P4,1,C66080,0 13=P4,2,C65759,0 14=P4,3,C65758,0 15=P4,4,C66072,0 16=P4,5,C66073,0 17=P4,6,C66059,0 18=P4,7,C66060,0 19=P4,10,K120,8 20=P4,11,K77,8 21=R1,36,C65615,0 22=R1,32,C65607,0 23=R1,13,C66277,0 24=R1,15,C66276,0 25=P1,12,C65686,0 26=R1,9,C66279,0 27=R1,11,C66278,0 28=P1,8,C65689,0 29=P1,3,C65564,0 30=P5,1,C65564,0 31=P5,0,C65853,0 32=R3,0,K73,8 33=R3,1,K79,8 34=P1,6,C65758,0 35=P1,4,C65759,0 [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No [GPSout2] GPSoutEnabled=No [WideServer] WideFSenabled=Yes [sounds] Path=C:\FSX\Sound\ Device1=Primary Sound Driver Device2=Headset (Sound Blaster Tactic(3D) Sigma) Device3=SPDIF Out (Creative SB X-Fi) Device4=SONY TV XV-0 (2- NVIDIA High Definition Audio) Device5=Speakers (Creative SB X-Fi) [Axes] 1=1Y,1,D,2,0,0,0 2=1Z,1,D,1,0,0,0 3=5X,1,D,1,0,0,0 4=5Y,1,D,2,0,0,0 5=1Y,1,D,2,0,0,0 6=2Z,1,D,22,0,0,0 7=3U,1,D,10,0,0,0 8=3V,128,D,9,0,0,0 9=0Y,1,D,8,0,0,0 [Profile.Single Piston Yoke] 1=Cessna Skyhawk 172SP Paint2 2=C185F SKYWAGON metal 3blade [Axes.Single Piston Yoke] 0=0X,1,D,7,0,0,0 1=0Y,1,D,8,0,0,0 2=0Z,1,D,3,0,0,0 3=2X,1,D,4,0,0,0 4=2Y,1,D,5,0,0,0 5=2Z,1,D,6,0,0,0 6=5X,1,D,1,0,0,0 7=5Y,1,D,2,0,0,0 [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16384,0,0,16256 Elevator=-16384,4992,4992,16256 Rudder=-16384,0,0,16256 Throttle=-16383,16384/16 PropPitch=-16383,16384/16 Mixture=-16383,16384/16 LeftBrake=-16256,16384/16 SlopeLeftBrake=15 RightBrake=-16256,16384/16 SlopeRightBrake=15 Spoilers=-16383,16384/16 Throttle1=-11182,-512,512,16383/32 Throttle2=-11182,-512,512,16383/32 Throttle3=-11182,-512,512,16383/32 Throttle4=-11182,-512,512,16383/32 Mixture1=-11182,8192,8192,16383/32 Mixture2=-11182,8192,8192,16383/32 Mixture3=-11182,8192,8192,16383/32 Mixture4=-11182,8192,8192,16383/32 PropPitch1=-11182,0,512,16383/32 PropPitch2=-11182,0,512,16383/32 PropPitch3=-11182,0,512,16383/32 PropPitch4=-11182,0,512,16383/32 SlopeAileron=3 SlopeElevator=3 SlopeRudder=3 [Profile.Single Engine Jet Fighter] 1=Milviz F-86F-30 Sabre Mike's Bird 2=Milviz F-86F-30 LUFTWAFFE_Mk.6 (#1625)_1950's_Hartmann. [Axes.Single Engine Jet Fighter] 0=0X,1,D,7,0,0,0 1=0Y,1,D,8,0,0,0 2=0Z,1,D,3,0,0,0 3=1X,1,D,1,0,0,0 4=1Y,1,D,2,0,0,0 5=2X,1,D,4,0,0,0 6=2Z,1,D,22,0,0,0 [Profile.Four Engine Piston Prop] 1=Queenie 2=Boeing B-17G "texas riders" 3=Boeing B-17G Outhouse Mouse 4=Boeing B-17G Boston Bombshell 5=42-30434 "Pistol Packin Mama" 6=Boeing B-17G 42-31569 "Sweet Patootie" 7=Boeing B-17G 42-31899 "Chatterbox" 8=Boeing B-17G 42-31983 "Mary Alice" 9=Boeing B-17G "42-102660, Sack Time Sioux, 452nd BG" 10=Boeing B-17G 42-97938 "Twan-n-g-g-g" 401st BG 11=Boeing B-17G "44-8531, Miasis Dragon, 452nd BG" 12=Boeing B-17G Damn Yankee 13=Boeing B-17G Sweet 17 14=ALPHA B-24J Cocktail Hour 15=ALPHA B-24J-125-CO 'The Jolly Rogers Express' 16=Boeing B-17G Chow Hound 17=Boeing B-17G "Liberty Belle N390TH" 18=ALPHA B-24J-150-CO 'The Butchers Daughter' 19=ALPHA B-24J-170-CO 20=Boeing B-17G 'Tis Me Sugar 21=Boeing B-17G Liberty Belle (2) 22=Boeing B-17G the pink lady [Axes.Four Engine Piston Prop] 0=0X,1,D,7,0,0,0 1=0Y,1,D,8,0,0,0 2=0Z,1,D,3,0,0,0 3=2Z,1,D,6,0,0,0 4=3X,1,D,29,0,0,0 5=3Y,1,D,30,0,0,0 6=3Z,1,D,17,0,0,0 7=3R,260,D,18,0,0,0 8=3U,1,D,20,0,0,0 9=3V,1,D,19,0,0,0 10=4X,1,D,9,0,0,0 11=4Y,1,D,10,0,0,0 12=4Z,1,D,11,0,0,0 13=4R,1,D,12,0,0,0 14=4U,1,D,32,0,0,0 15=4V,1,D,31,0,0,0 16=5X,1,D,1,0,0,0 17=5Y,1,D,2,0,0,0 [JoystickCalibration.Four Engine Piston Prop] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16384,0,0,16256 Elevator=-16384,4992,4992,16256 Rudder=-16384,0,0,16256 Throttle=-16383,16384/16 PropPitch=-16383,16384/16 Mixture=-16383,16384/16 LeftBrake=-16256,16384/16 SlopeLeftBrake=15 RightBrake=-16256,16384/16 SlopeRightBrake=15 Throttle1=-11182,-512,512,16383/32 Throttle2=-11182,-512,512,16383/32 Throttle3=-11182,-512,512,16383/32 Throttle4=-11182,-512,512,16383/32 Mixture1=-11182,8192,8192,16383/32 Mixture2=-11182,8192,8192,16383/32 Mixture3=-11182,8192,8192,16383/32 Mixture4=-11182,8192,8192,16383/32 PropPitch1=-11182,0,512,16383/32 PropPitch2=-11182,0,512,16383/32 PropPitch3=-11182,0,512,16383/32 PropPitch4=-11182,0,512,16383/32 Spoilers=-16383,16384/16 CowlFlaps1=-11182,16383 CowlFlaps2=-11182,16383 CowlFlaps3=-11182,16383 CowlFlaps4=-11182,16383 [Profile.Four Engine Jet Yoke] 1=CS B-52 BUFF Exterior Paint22 2=CS B-52 BUFF Exterior Paint7 [Axes.Four Engine Jet Yoke] 0=0X,1,D,7,0,0,0 1=0Y,1,D,8,0,0,0 2=0Z,1,D,3,0,0,0 3=2Z,1,D,22,0,0,0 4=4X,1,D,9,0,0,0 5=4Y,1,D,10,0,0,0 6=4Z,1,D,11,0,0,0 7=4R,1,D,12,0,0,0 8=5X,1,D,1,0,0,0 9=5Y,1,D,2,0,0,0 [JoystickCalibration.Four Engine Jet Yoke] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16384,0,0,16256 Elevator=-16384,4992,4992,16256 Rudder=-16384,0,0,16256 Throttle=-16383,16384/16 PropPitch=-16383,16384/16 Mixture=-16383,16384/16 LeftBrake=-16256,16384/16 SlopeLeftBrake=15 RightBrake=-16256,16384/16 SlopeRightBrake=15 Throttle1=-11182,-11182,-11182,16383/32 Throttle2=-11182,-11182,-11182,16383/32 Throttle3=-11182,-11182,-11182,16383/32 Throttle4=-11182,-11182,-11182,16383/32 Mixture1=-11182,8192,8192,16383/32 Mixture2=-11182,8192,8192,16383/32 Mixture3=-11182,8192,8192,16383/32 Mixture4=-11182,8192,8192,16383/32 PropPitch1=-11182,0,512,16383/32 PropPitch2=-11182,0,512,16383/32 PropPitch3=-11182,0,512,16383/32 PropPitch4=-11182,0,512,16383/32 Spoilers=-16383,16384/16 CowlFlaps1=-11182,16383 CowlFlaps2=-11182,16383 CowlFlaps3=-11182,16383 CowlFlaps4=-11182,16383 [Profile.Twin Prop Yoke] 1=P-38J Thoughts of Midnite 2=P-38J-Urgent Bidness 3=B-25J 'The Denver Dumper' 4=PBJ-1J 'Bite Me' 5=P-38J-SkylarkIV 6=Sweet Sue [Axes.Twin Prop Yoke] 0=0X,1,D,7,0,0,0 1=0Y,1,D,8,0,0,0 2=0Z,1,D,3,0,0,0 3=3X,1,D,29,0,0,0 4=3Y,1,D,30,0,0,0 5=4X,1,D,9,0,0,0 6=4Y,1,D,10,0,0,0 7=4Z,1,D,17,0,0,0 8=4R,1,D,18,0,0,0 9=4U,1,D,14,0,0,0 10=4V,1,D,13,0,0,0 11=5X,1,D,1,0,0,0 12=5Y,1,D,2,0,0,0 [JoystickCalibration.Twin Prop Yoke] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16384,0,0,16256 Elevator=-16384,4992,4992,16256 Rudder=-16384,0,0,16256 Throttle=-16383,16384/16 PropPitch=-16383,16384/16 Mixture=-16383,16384/16 LeftBrake=-16256,16384/16 SlopeLeftBrake=15 RightBrake=-16256,16384/16 SlopeRightBrake=15 Throttle1=-11182,-512,512,16383/32 Throttle2=-11182,-512,512,16383/32 Throttle3=-16380,-512,512,16380/32 Throttle4=-16380,-512,512,16380/32 Mixture1=-11182,8192,8192,16383/32 Mixture2=-11182,8192,8192,16383/32 Mixture3=-11182,8192,8192,16383/32 Mixture4=-11182,8192,8192,16383/32 PropPitch1=-11182,0,512,16383/32 PropPitch2=-11182,0,512,16383/32 PropPitch3=-11182,0,512,16383/32 PropPitch4=-11182,0,512,16383/32 Spoilers=-16383,16384/16 CowlFlaps1=-11182,16383 CowlFlaps2=-11182,16383 [Profile.Single Piston Stick] 1=P-47D-22-RE Kansas Tornado 2=P-47D-20-RA 362nd FG 3=P-51D 'QP-S' 4=P-51D 'Suzon' [Axes.Single Piston Stick] 0=0X,1,D,7,0,0,0 1=0Y,1,D,8,0,0,0 2=0Z,1,D,3,0,0,0 3=1X,1,D,1,0,0,0 4=1Y,1,D,2,0,0,0 5=2X,1,D,4,0,0,0 6=2Y,1,D,5,0,0,0 7=2Z,1,D,6,0,0,0 8=3X,1,D,29,0,0,0 [JoystickCalibration.Single Piston Stick] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16384,0,0,16256 Elevator=-16384,4992,4992,16256 Rudder=-16384,0,0,16256 Throttle=-16383,16384/16 PropPitch=-16383,16384/16 Mixture=-16383,16384/16 LeftBrake=-16256,16384/16 SlopeLeftBrake=15 RightBrake=-16256,16384/16 SlopeRightBrake=15 Throttle1=-11182,-512,512,16383/32 Throttle2=-11182,-512,512,16383/32 Throttle3=-11182,-512,512,16383/32 Throttle4=-11182,-512,512,16383/32 Mixture1=-11182,8192,8192,16383/32 Mixture2=-11182,8192,8192,16383/32 Mixture3=-11182,8192,8192,16383/32 Mixture4=-11182,8192,8192,16383/32 PropPitch1=-11182,0,512,16383/32 PropPitch2=-11182,0,512,16383/32 PropPitch3=-11182,0,512,16383/32 PropPitch4=-11182,0,512,16383/32 Spoilers=-16383,16384/16 CowlFlaps1=-11182,16383 [Profile.Twin Engine Jet Fighter] 1= [Axes.Twin Engine Jet Fighter] 0=0X,1,D,7,0,0,0 1=0Y,1,D,8,0,0,0 2=0Z,1,D,3,0,0,0 3=1X,1,D,1,0,0,0 4=1Y,1,D,2,0,0,0 5=2X,1,D,4,0,0,0 6=2Z,1,D,22,0,0,0 abh_jc_03
  5. Hi: I have been having a bit of a problem assigning aircraft, especially A2A aircraft, to a profile under FSUIPC. I am posting this message on the A2A and FSUIPC support forums, in the hopes of finding a solution. I have a registered copy of FSUIPC, and it is set to use “profiles.” I have all of the A2A aircraft with accusim installed, except for the civilian version of the P-51. My computer specs are below, and I have Windows 7 64 bit set up with full administrator rights, and UAC turned off. I have spent some time searching through various forums to find a solution, and I thought I had it licked until today. Here’s what has happened, and what I have done. Yesterday, I had tinkered a little with the joystick assignment utility for the Accusim B-17, did not assign any controls, shut it down, and started FSX. I had a profile set up for four engine props, started FSX, loaded the B-17 (with Accusim), but every time that I clicked on the small box next to “profile specific,” FSUIPC would remove the check mark and not allow me to assign any of my B-17 repaints to the profile I had created. I then tried other non-A2A (the Milviz F-86 and default Cessna), no luck. I checked the “FSUIPC4.ini” file in the modules folder, and under the relevant [profile.xxx] heading, FSUIPC had created a number for the plane that I tried to assign, but there was no reference to the aircraft itself. (i.e., “3= [empty space]”). I tried everything, including removing FSUIPC, installing the latest version, and attempting to create new profiles. No luck; same problem. I came across this posting in the FSUIPC forum where someone was having the exact same problem ( ( page__hl__+profile%20+assign#entry443885). After reading through this, I uninstalled, rebooted, and reinstalled my FSX Acceleration (from what I read, to repair simconnect). I then reinstalled the Accusim B-17, reinstalled FSUIPC, and everything worked fine, including all the Accusim aircraft. I attempted once more to use the A2A configuration tool to assign a controller to operate the boost control lever in the P-47 with accusim. The same problem arose. This time, I went to the “tools” folder (“C:/FSX/A2A/P-47/Tools”), and noted that the configuration tool created some form of “ini” files to set up the joystick assignment. I deleted everything – except for the installation “logs” created when I installed the aircraft and the configuration tool itself – and I could again assign planes to profiles in FSUIPC with no problem. Today, I installed the Accusim core update (“accusim_fsx_core_update_v1.5.1”), tried to fly the P-51, but found that the same problem of not being able to assign planes to a profile has returned. I went through all of the A2A tool folders to see if there were files related to the configuration tools that I could remove, but found none. Does anyone have an idea about what is going on, and how I can fix this? Thanks Mike Gutierrez North Hollywood, California Asus P6T6 Motherboard; Intel i7 (920 – 2.6 ghz) oc to 4ghz); Corsair Dominator memory DDR3 (12GB); EVGA Nvidia GTX580 video card); Soundblaster X-Fi Titanium Sound Card.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.