wlix261
-
Posts
51 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by wlix261
-
-
Hi Volker
I must be doing something silly, because I can't do MENU-> Window -> Options -> Display and then Disable Reset Map / GPS / NavData window position, because The FSC menu is not visible to me at any time. The window is far away from onset and I cannot change anything.
Meanwhile I edited FSC.ini and changed REMWINPOS=1 and REMGPSWINPOS=1 to zeroes. This did not work either. FSC forces REMWINPOS=1upon exit.
Regards
Alvaro Escorcia
-
Dear Volker
I have just uninstalled FSC 9.x and installed in full the current FSC version 10.6.
Apologies for asking again but I could not find in the docs and forum the answer to this old question. "How to reset FSC so that I see the map and data windows?" those seem to open far out of either main or second monitor. Here are the settings I have in FSC.ini
WINX=32550
WINY=150
REMWINPOS=1
REMGPSWINPOS=1
GPSWINX=-4140
GPSWINY=225
NAVDATAWINX=-4290
NAVDATAWINY=3060I have forced zeroes in WINX and WINY also I reset NAVDATAWINX and NAVDATAWINY. Looks like didn't work. Always I open FSC as admin
- I have FSC version 10.6
- Win 10 64 bits
- FSX-SE
- FSUIPC4
Regards
Alvaro Escorcia
-
Hello
I get "403 Forbidden" message when attempting to downlod the information on the latest update of FS Commander. This happens in my 2 different PC's. One Laptop and one Desktop.
I would appreciate help on solving this for FSC from this forum
I use Windows 10 64 bits,FSX-Steam Edition and am currently using OK in the laptop FS Commander version 9.6 Rev 7
Regards
Alvaro Escorcia
-
I agree that FSC has been and still is a unique and very useful product for the flight simulation enthusiast. It would be fantastic if theproduct can be supported going forward into the P3Dv4 and beyond platform.
Some of the key differentiating and important features (as a flight planning and moving map aid during flight)are:
(1) Performance, (2) Reliability; (3) Usability
Other apps like the little moving map and aivlasoft EFB are quite different and do not meet the expectations on the three points above set as a high-bar by FSC. Instead of being a high performance map (like a radar screen for an ATC) those other apps fill the screen with contact information instead of core (visual) information and lack the performance and usability of OFC
Regards
Alvaro Escorcia
-
1
-
-
Thanks for the quick Reply Pete.
Will do that right away - That is well worth!
Best regards
Alvaro Escorcia
-
Hello
I can not register FSUIPC5 using the same key have from FSUIPC4 (file FSUIPC4.KEY) .reading the instructions Seems like this would work.
How can I regiister?
regards
Alvaro Escorcia
-
I talked with Francisco.
He had a few wrong entries in P3D's scenery setup. Those were pointing inside the scenery folder for each airport and should have been pointing one level higher.
No issue with Make Runways - All is OK....
Regards
Alvaro Escorcia
-
Hello Pete
Thanks for the wonderful work you do for the Fsim community
Which of your apps should I use to obtain a dump in this format from my particular FSX-SE installation?
Regards
Alvaro Escorcia
-
Quote
After the P3D Crash,
This is what comes out of the DLL.XML file located at
c:\User\me\AppData\Roaming\Lockheed Martin\Prepar3D v3
<SimBase.Document Type="Launch" version="1,0">
<Descr>Launch</Descr>
<Filename>dll.xml</Filename>
<Disabled>False</Disabled>
<Launch.ManualLoad>False</Launch.ManualLoad>
<Launch.Addon>
<Name>FSX-Join</Name>
<Disabled>False</Disabled>
<Path>Modules\FSX-JoinD.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>IvAp</Name>
<Disabled>False</Disabled>
<Path>C:\Program Files\IvAp v2\ivap_fsx_bootstrap.dll</Path>
<Commandline>
</Commandline>
</Launch.Addon>
<Launch.Addon>
<Name>CMetroXml</Name>
<ManualLoad>True</ManualLoad>
<Disabled>False</Disabled>
<Path>.\CMeteoXml.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>Carenavigraph</Name>
<Disabled>False</Disabled>
<Path>.\Carenavigraph.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>FSUIPC 4</Name>
<Disabled>False</Disabled>
<Path>Modules\FSUIPC4.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>as_connect</Name>
<Disabled>False</Disabled>
<Path>as_srv\as_btstrp.dll</Path>
</Launch.Addon>
</SimBase.Document>Regards
Alvaro Escorcia
-
I still lave the problem
I use Lockheed Martin® Prepar3D® v3, Version: 3.4.14.18870 and FSUIPC4, Version 4.959
Hopefully Pete has the opportunity to look at this when he gets back from holidays
regards
Alvaro Escorcia
-
Peter: What is that worked for you?
Thomas: Thanks for your patience. I have loaded P3D, selected the default scenario with a default (mooney) airplane and saved it as default. Problem persists.
Here is the FSUIPC4 Log File
********* FSUIPC4, Version 4.959 (19th December 2016) by Pete Dowson *********
Windows version reported as 6.2.?.9200
Prepar3D.exe version = 3.4.14.18870
Reading options from "C:\Prepar3Dv3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0 or later
Module base=51010000
User Name="Alvaro Escorcia"
User Addr="aescorcia@comcast.net"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
32 System time = 27/12/2016 07:08:35
32 FLT path = "C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\"
32 NOTE: configuring for no weather reads or writes!
32 ------ Module Version Check ------
32 acontain.dll: 3.4.14.18870
32 api.dll: 3.4.14.18870
32 controls.dll: 3.4.14.18870
32 fs-traffic.dll: 3.4.14.18870
32 G3D.dll: 3.4.14.18870
32 language.dll: 3.4.14.18870
32 sim1.dll: 3.4.14.18870
32 visualfx.dll: 3.4.14.18870
32 window.dll: 3.4.14.18870
32 ----------------------------------
32 Trying C:\Prepar3Dv3\Modules\SimConnectP3D3.dll
79 Found it: trying to connect
94 FS path = "C:\Prepar3Dv3\"
235 ---------------------- Joystick Device Scan -----------------------
235 Product= Saitek Pro Flight Rudder Pedals
235 Manufacturer= Saitek
235 Vendor=06A3, Product=0763 (Version 1.1)
235 Serial Number= Saitek
235 Product= Saitek Pro Flight Yoke
235 Manufacturer= Saitek
235 Vendor=06A3, Product=0BAC (Version 3.2)
235 Serial Number= Saitek
235 -------------------------------------------------------------------
266 LogOptions=00000000 00000001
266 -------------------------------------------------------------------
266 ------ Setting the hooks and direct calls into the simulator ------
266 --- CONTROLS timer memory location obtained ok
266 --- SIM1 Frictions access gained
266 --- FS Controls Table located ok
266 --- Installed Mouse Macro hooks ok.
266 --- Wind smoothing fix is not installed
266 --- SimConnect intercept for texts and menus option is off
266 --- All links okay (with no weather related ones)
266 -------------------------------------------------------------------
266 SimConnect_Open succeeded: waiting to check version okay
266 Trying to use SimConnect Prepar3D
266 Opened separate AI Traffic client okay
56782 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.14.18870 (SimConnect: 3.4.0.0)
56782 Initialising SimConnect data requests now
56782 FSUIPC Menu entry added
56813 C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\DEFAULT PLANE LEVC.fxml
56813 C:\Prepar3Dv3\SimObjects\Airplanes\Mooney_Bravo\Mooney_Bravo.air
140750 User Aircraft ID 2 supplied, now being used
141579 System time = 27/12/2016 07:10:57, Simulator time = 08:55:08 (07:55Z)
141594 Aircraft="Mooney Bravo"
147610 Starting everything now ...
147641 ASN active function link set
147641 Ready for ASN WX radar
165750 Sim stopped: average frame rate for last 25 secs = 36.4 fps
165750 Max AI traffic was 0 aircraft
337688 Sim stopped: average frame rate for last 167 secs = 47.3 fps
337688 Max AI traffic was 0 aircraft
367844 === Calling SimConnect_Close ...
368047 === SimConnect_Close done!
369047 System time = 27/12/2016 07:14:44, Simulator time = 08:57:54 (07:57Z)
369047 *** FSUIPC log file being closed
Minimum frame rate was 23.3 fps, Maximum was 60.0 fps
Minimum available memory recorded was 1572Mb
Average frame rate for running time of 192 secs = 45.9 fps
Maximum AI traffic for session was 0 aircraft
Memory managed: 5 Allocs, 4 Freed
********* FSUIPC Log file closed *********** -
Peter: What is that worked for you?
Thomas: Thanks for your patience. I have loaded P3D, selected the default scenario with a default (mooney) airplane and saved it as default. Problem persists.
Here is the FSUIPC4 Log File
********* FSUIPC4, Version 4.959 (19th December 2016) by Pete Dowson *********
Windows version reported as 6.2.?.9200
Prepar3D.exe version = 3.4.14.18870
Reading options from "C:\Prepar3Dv3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0 or later
Module base=51010000
User Name="Alvaro Escorcia"
User Addr="aescorcia@comcast.net"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
32 System time = 27/12/2016 07:08:35
32 FLT path = "C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\"
32 NOTE: configuring for no weather reads or writes!
32 ------ Module Version Check ------
32 acontain.dll: 3.4.14.18870
32 api.dll: 3.4.14.18870
32 controls.dll: 3.4.14.18870
32 fs-traffic.dll: 3.4.14.18870
32 G3D.dll: 3.4.14.18870
32 language.dll: 3.4.14.18870
32 sim1.dll: 3.4.14.18870
32 visualfx.dll: 3.4.14.18870
32 window.dll: 3.4.14.18870
32 ----------------------------------
32 Trying C:\Prepar3Dv3\Modules\SimConnectP3D3.dll
79 Found it: trying to connect
94 FS path = "C:\Prepar3Dv3\"
235 ---------------------- Joystick Device Scan -----------------------
235 Product= Saitek Pro Flight Rudder Pedals
235 Manufacturer= Saitek
235 Vendor=06A3, Product=0763 (Version 1.1)
235 Serial Number= Saitek
235 Product= Saitek Pro Flight Yoke
235 Manufacturer= Saitek
235 Vendor=06A3, Product=0BAC (Version 3.2)
235 Serial Number= Saitek
235 -------------------------------------------------------------------
266 LogOptions=00000000 00000001
266 -------------------------------------------------------------------
266 ------ Setting the hooks and direct calls into the simulator ------
266 --- CONTROLS timer memory location obtained ok
266 --- SIM1 Frictions access gained
266 --- FS Controls Table located ok
266 --- Installed Mouse Macro hooks ok.
266 --- Wind smoothing fix is not installed
266 --- SimConnect intercept for texts and menus option is off
266 --- All links okay (with no weather related ones)
266 -------------------------------------------------------------------
266 SimConnect_Open succeeded: waiting to check version okay
266 Trying to use SimConnect Prepar3D
266 Opened separate AI Traffic client okay
56782 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.14.18870 (SimConnect: 3.4.0.0)
56782 Initialising SimConnect data requests now
56782 FSUIPC Menu entry added
56813 C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\DEFAULT PLANE LEVC.fxml
56813 C:\Prepar3Dv3\SimObjects\Airplanes\Mooney_Bravo\Mooney_Bravo.air
140750 User Aircraft ID 2 supplied, now being used
141579 System time = 27/12/2016 07:10:57, Simulator time = 08:55:08 (07:55Z)
141594 Aircraft="Mooney Bravo"
147610 Starting everything now ...
147641 ASN active function link set
147641 Ready for ASN WX radar
165750 Sim stopped: average frame rate for last 25 secs = 36.4 fps
165750 Max AI traffic was 0 aircraft
337688 Sim stopped: average frame rate for last 167 secs = 47.3 fps
337688 Max AI traffic was 0 aircraft
367844 === Calling SimConnect_Close ...
368047 === SimConnect_Close done!
369047 System time = 27/12/2016 07:14:44, Simulator time = 08:57:54 (07:57Z)
369047 *** FSUIPC log file being closed
Minimum frame rate was 23.3 fps, Maximum was 60.0 fps
Minimum available memory recorded was 1572Mb
Average frame rate for running time of 192 secs = 45.9 fps
Maximum AI traffic for session was 0 aircraft
Memory managed: 5 Allocs, 4 Freed
********* FSUIPC Log file closed *********** -
Hi, here is the content of FSUIPC4 Log file during the full cycle of crash-fix-load:
I loaded P3d selecting a default Aircraft, and after a minute or so I closed P3D. After the Icon disappeared I noticed in Win Task manager that the P3D process was still running, and after a few more minutes it stopped on its own with a little window (crash or error) message.
This is the FSUIPC4 log right at that moment : P3D closed with default plane and reported a bad exit:
********* FSUIPC4, Version 4.959 (19th December 2016) by Pete Dowson *********
Windows version reported as 6.2.?.9200
Prepar3D.exe version = 3.4.14.18870
Reading options from "C:\Prepar3Dv3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0 or later
Module base=52240000
User Name="Alvaro Escorcia"
User Addr="aescorcia@comcast.net"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
32 System time = 26/12/2016 06:55:00
32 FLT path = "C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\"
32 NOTE: configuring for no weather reads or writes!
32 ------ Module Version Check ------
32 acontain.dll: 3.4.14.18870
32 api.dll: 3.4.14.18870
32 controls.dll: 3.4.14.18870
32 fs-traffic.dll: 3.4.14.18870
32 G3D.dll: 3.4.14.18870
32 language.dll: 3.4.14.18870
32 sim1.dll: 3.4.14.18870
32 visualfx.dll: 3.4.14.18870
32 window.dll: 3.4.14.18870
32 ----------------------------------
32 Trying C:\Prepar3Dv3\Modules\SimConnectP3D3.dll
63 Found it: trying to connect
78 FS path = "C:\Prepar3Dv3\"
203 ---------------------- Joystick Device Scan -----------------------
203 Product= Saitek Pro Flight Rudder Pedals
203 Manufacturer= Saitek
203 Vendor=06A3, Product=0763 (Version 1.1)
203 Serial Number= Saitek
203 Product= Saitek Pro Flight Yoke
203 Manufacturer= Saitek
203 Vendor=06A3, Product=0BAC (Version 3.2)
203 Serial Number= Saitek
203 -------------------------------------------------------------------
235 LogOptions=00000000 00000001
235 -------------------------------------------------------------------
235 ------ Setting the hooks and direct calls into the simulator ------
235 --- CONTROLS timer memory location obtained ok
235 --- SIM1 Frictions access gained
235 --- FS Controls Table located ok
235 --- Installed Mouse Macro hooks ok.
235 --- Wind smoothing fix is not installed
235 --- SimConnect intercept for texts and menus option is off
235 --- All links okay (with no weather related ones)
235 -------------------------------------------------------------------
235 SimConnect_Open succeeded: waiting to check version okay
235 Trying to use SimConnect Prepar3D
235 Opened separate AI Traffic client okay
52891 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.14.18870 (SimConnect: 3.4.0.0)
52891 Initialising SimConnect data requests now
52891 FSUIPC Menu entry added
52891 C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\LEVC A2A C172 AHS GA PARKING.fxml
52891 C:\Prepar3Dv3\SimObjects\Airplanes\A2A_C172\C172.air
1757032 C:\Prepar3Dv3\SimObjects\Airplanes\Mooney_Bravo\Mooney_Bravo.air
1817188 User Aircraft ID 2 supplied, now being used
1817547 System time = 26/12/2016 07:25:17, Simulator time = 09:07:39 (08:07Z)
1817547 Aircraft="Mooney Bravo"
1819500 Starting everything now ...
1819532 ASN active function link set
1819532 Ready for ASN WX radar
1839969 Sim stopped: average frame rate for last 23 secs = 38.7 fps
1839969 Max AI traffic was 0 aircraft
1886313 Sim stopped: average frame rate for last 41 secs = 49.6 fps
1886313 Max AI traffic was 0 aircraft
1949016 === Calling SimConnect_Close ...
1949219 === SimConnect_Close done!
1950219 System time = 26/12/2016 07:27:30, Simulator time = 09:08:25 (08:08Z)
1950219 *** FSUIPC log file being closed
Minimum frame rate was 30.0 fps, Maximum was 61.4 fps
Minimum available memory recorded was 1687Mb
Average frame rate for running time of 69 secs = 46.3 fps
Maximum AI traffic for session was 0 aircraft
Memory managed: 5 Allocs, 4 Freed
********* FSUIPC Log file closed ***********Without changing anything else I try to load P3D and as expected I get a fatal crash.
This is the FSUIPC4 log file I get.
Seems to be the same content as before the missed-load-attempt despite the fact that I opened and closed it a few times to be sure is the fresh version
********* FSUIPC4, Version 4.959 (19th December 2016) by Pete Dowson *********
Windows version reported as 6.2.?.9200
Prepar3D.exe version = 3.4.14.18870
Reading options from "C:\Prepar3Dv3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0 or later
Module base=52240000
User Name="Alvaro Escorcia"
User Addr="aescorcia@comcast.net"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
32 System time = 26/12/2016 06:55:00
32 FLT path = "C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\"
32 NOTE: configuring for no weather reads or writes!
32 ------ Module Version Check ------
32 acontain.dll: 3.4.14.18870
32 api.dll: 3.4.14.18870
32 controls.dll: 3.4.14.18870
32 fs-traffic.dll: 3.4.14.18870
32 G3D.dll: 3.4.14.18870
32 language.dll: 3.4.14.18870
32 sim1.dll: 3.4.14.18870
32 visualfx.dll: 3.4.14.18870
32 window.dll: 3.4.14.18870
32 ----------------------------------
32 Trying C:\Prepar3Dv3\Modules\SimConnectP3D3.dll
63 Found it: trying to connect
78 FS path = "C:\Prepar3Dv3\"
203 ---------------------- Joystick Device Scan -----------------------
203 Product= Saitek Pro Flight Rudder Pedals
203 Manufacturer= Saitek
203 Vendor=06A3, Product=0763 (Version 1.1)
203 Serial Number= Saitek
203 Product= Saitek Pro Flight Yoke
203 Manufacturer= Saitek
203 Vendor=06A3, Product=0BAC (Version 3.2)
203 Serial Number= Saitek
203 -------------------------------------------------------------------
235 LogOptions=00000000 00000001
235 -------------------------------------------------------------------
235 ------ Setting the hooks and direct calls into the simulator ------
235 --- CONTROLS timer memory location obtained ok
235 --- SIM1 Frictions access gained
235 --- FS Controls Table located ok
235 --- Installed Mouse Macro hooks ok.
235 --- Wind smoothing fix is not installed
235 --- SimConnect intercept for texts and menus option is off
235 --- All links okay (with no weather related ones)
235 -------------------------------------------------------------------
235 SimConnect_Open succeeded: waiting to check version okay
235 Trying to use SimConnect Prepar3D
235 Opened separate AI Traffic client okay
52891 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.14.18870 (SimConnect: 3.4.0.0)
52891 Initialising SimConnect data requests now
52891 FSUIPC Menu entry added
52891 C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\LEVC A2A C172 AHS GA PARKING.fxml
52891 C:\Prepar3Dv3\SimObjects\Airplanes\A2A_C172\C172.air
1757032 C:\Prepar3Dv3\SimObjects\Airplanes\Mooney_Bravo\Mooney_Bravo.air
1817188 User Aircraft ID 2 supplied, now being used
1817547 System time = 26/12/2016 07:25:17, Simulator time = 09:07:39 (08:07Z)
1817547 Aircraft="Mooney Bravo"
1819500 Starting everything now ...
1819532 ASN active function link set
1819532 Ready for ASN WX radar
1839969 Sim stopped: average frame rate for last 23 secs = 38.7 fps
1839969 Max AI traffic was 0 aircraft
1886313 Sim stopped: average frame rate for last 41 secs = 49.6 fps
1886313 Max AI traffic was 0 aircraft
1949016 === Calling SimConnect_Close ...
1949219 === SimConnect_Close done!
1950219 System time = 26/12/2016 07:27:30, Simulator time = 09:08:25 (08:08Z)
1950219 *** FSUIPC log file being closed
Minimum frame rate was 30.0 fps, Maximum was 61.4 fps
Minimum available memory recorded was 1687Mb
Average frame rate for running time of 69 secs = 46.3 fps
Maximum AI traffic for session was 0 aircraft
Memory managed: 5 Allocs, 4 Freed
********* FSUIPC Log file closed ***********Then I run my onetimefix (FSUIPC4 installer), so I can load P3D again. I chose a default (mooney) aircraft, and it loads OK.
At that point this is what I get from the FSUIPC4 Log File:
********* FSUIPC4, Version 4.959 (19th December 2016) by Pete Dowson *********
Windows version reported as 6.2.?.9200
Prepar3D.exe version = 3.4.14.18870
Reading options from "C:\Prepar3Dv3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0 or later
Module base=52240000
User Name="Alvaro Escorcia"
User Addr="aescorcia@comcast.net"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
16 System time = 26/12/2016 07:43:02
16 FLT path = "C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\"
16 NOTE: configuring for no weather reads or writes!
16 ------ Module Version Check ------
16 acontain.dll: 3.4.14.18870
16 api.dll: 3.4.14.18870
16 controls.dll: 3.4.14.18870
16 fs-traffic.dll: 3.4.14.18870
16 G3D.dll: 3.4.14.18870
16 language.dll: 3.4.14.18870
16 sim1.dll: 3.4.14.18870
16 visualfx.dll: 3.4.14.18870
16 window.dll: 3.4.14.18870
16 ----------------------------------
16 Trying C:\Prepar3Dv3\Modules\SimConnectP3D3.dll
47 Found it: trying to connect
63 FS path = "C:\Prepar3Dv3\"
188 ---------------------- Joystick Device Scan -----------------------
188 Product= Saitek Pro Flight Rudder Pedals
188 Manufacturer= Saitek
188 Vendor=06A3, Product=0763 (Version 1.1)
188 Serial Number= Saitek
188 Product= Saitek Pro Flight Yoke
188 Manufacturer= Saitek
188 Vendor=06A3, Product=0BAC (Version 3.2)
188 Serial Number= Saitek
188 -------------------------------------------------------------------
219 LogOptions=00000000 00000001
219 -------------------------------------------------------------------
219 ------ Setting the hooks and direct calls into the simulator ------
219 --- CONTROLS timer memory location obtained ok
219 --- SIM1 Frictions access gained
219 --- FS Controls Table located ok
219 --- Installed Mouse Macro hooks ok.
219 --- Wind smoothing fix is not installed
219 --- SimConnect intercept for texts and menus option is off
219 --- All links okay (with no weather related ones)
219 -------------------------------------------------------------------
219 SimConnect_Open succeeded: waiting to check version okay
219 Trying to use SimConnect Prepar3D
219 Opened separate AI Traffic client okay
52750 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.14.18870 (SimConnect: 3.4.0.0)
52750 Initialising SimConnect data requests now
52750 FSUIPC Menu entry added
52766 C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\LEVC A2A C172 AHS GA PARKING.fxml
52766 C:\Prepar3Dv3\SimObjects\Airplanes\A2A_C172\C172.air
81391 C:\Prepar3Dv3\SimObjects\Airplanes\Mooney_Bravo\Mooney_Bravo.air
140735 User Aircraft ID 2 supplied, now being used
140860 System time = 26/12/2016 07:45:23, Simulator time = 08:44:20 (07:44Z)
140860 Aircraft="Mooney Bravo"
142844 Starting everything now ...
142875 ASN active function link set
142875 Ready for ASN WX radar
163141 Sim stopped: average frame rate for last 22 secs = 38.4 fps
163141 Max AI traffic was 0 aircraft
================= -
9 minutes ago, wlix261 said:
I have updated this post
And here is the content of the FSUIPC4 log file
********* FSUIPC4, Version 4.959 (19th December 2016) by Pete Dowson *********
Windows version reported as 6.2.?.9200
Prepar3D.exe version = 3.4.14.18870
Reading options from "C:\Prepar3Dv3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0 or later
Module base=52240000
User Name="Alvaro Escorcia"
User Addr="aescorcia@comcast.net"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
32 System time = 26/12/2016 06:55:00
32 FLT path = "C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\"
32 NOTE: configuring for no weather reads or writes!
32 ------ Module Version Check ------
32 acontain.dll: 3.4.14.18870
32 api.dll: 3.4.14.18870
32 controls.dll: 3.4.14.18870
32 fs-traffic.dll: 3.4.14.18870
32 G3D.dll: 3.4.14.18870
32 language.dll: 3.4.14.18870
32 sim1.dll: 3.4.14.18870
32 visualfx.dll: 3.4.14.18870
32 window.dll: 3.4.14.18870
32 ----------------------------------
32 Trying C:\Prepar3Dv3\Modules\SimConnectP3D3.dll
63 Found it: trying to connect
78 FS path = "C:\Prepar3Dv3\"
203 ---------------------- Joystick Device Scan -----------------------
203 Product= Saitek Pro Flight Rudder Pedals
203 Manufacturer= Saitek
203 Vendor=06A3, Product=0763 (Version 1.1)
203 Serial Number= Saitek
203 Product= Saitek Pro Flight Yoke
203 Manufacturer= Saitek
203 Vendor=06A3, Product=0BAC (Version 3.2)
203 Serial Number= Saitek
203 -------------------------------------------------------------------
235 LogOptions=00000000 00000001
235 -------------------------------------------------------------------
235 ------ Setting the hooks and direct calls into the simulator ------
235 --- CONTROLS timer memory location obtained ok
235 --- SIM1 Frictions access gained
235 --- FS Controls Table located ok
235 --- Installed Mouse Macro hooks ok.
235 --- Wind smoothing fix is not installed
235 --- SimConnect intercept for texts and menus option is off
235 --- All links okay (with no weather related ones)
235 -------------------------------------------------------------------
235 SimConnect_Open succeeded: waiting to check version okay
235 Trying to use SimConnect Prepar3D
235 Opened separate AI Traffic client okay
52891 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.4.14.18870 (SimConnect: 3.4.0.0)
52891 Initialising SimConnect data requests now
52891 FSUIPC Menu entry added
52891 C:\Users\ESCORCIAW10\Documents\Prepar3D v3 Files\LEVC A2A C172 AHS GA PARKING.fxml
52891 C:\Prepar3Dv3\SimObjects\Airplanes\A2A_C172\C172.air -
-
Thomas
Thank you for the advice.
I found the instances you refer to for the .WX files and for the wxstationlist.bin file which I deleted. I also added the line "NoWeatherAtAll=Yes" to the FSUIPC.ini file.
I did that having P3D open. I then closed it , opened it again and It loaded OK. I hope this stays like this and I can close/open P3D at my will without having the crashes.
===> Update: Yet P3D crashed again. The fix worked for 1 time only. After crash I checked the FSUIPC.ini file still with the new line, and the wxstationlist.bin back where it was before, as well as 1 .wx file (the previous file one).
Another observation: having deleted the .bin and .wx files did not get P3D back to be able to start. Really the only way I get P3D back to start is by re-running the Install FSUIPC4.exe (it finds the installation and I tell him to use existing registration. So it really doesn't seem to install anything, but perhaps cleans up or re-initiate something that makes P3D to load OK the next time I rune it.... I can use P3D OK ...but P3D still reports an error when closing and goes back to not load, and the cycle starts again).
By the way, can you tell me if having added the line to the FSUIPC.ini file will prevent using my external weather engine = AS2016?
Thanks and regards
Alvaro Escorcia
-
Hello, I use W10, P3D version 3.4.14.and FSUIPC Version 4.95
I am having crash when trying to load P3Dv3.4, and I get a windows crash report that lists the fault module name as FSUIPC4.dll.
I was asked to ask here in the FSUIPC support forum for help.
Thanks in advance
regards
Alvaro Escorcia
======================
Version=1
EventType=APPCRASH
EventTime=131270548622828061
ReportType=2
Consent=1
UploadTime=131270548623687519
ReportIdentifier=91c8cece-c9d1-11e6-a988-d8cb8a5ad4fb
IntegratorReportIdentifier=91c8cecd-c9d1-11e6-a988-d8cb8a5ad4fb
WOW64=1
AppSessionGuid=00000bb0-0001-0039-0b2b-954dde5dd201
TargetAppId=W:0000da39a3ee5e6b4b0d3255bfef95601890afd80709!0000da39a3ee5e6b4b0d3255bfef95601890afd80709!Prepar3D.exe
TargetAppVer=2016//10//27:17:31:14!6cc50!Prepar3D.exe
BootId=4294967295
Response.BucketId=a8a1b4db5c4504c465b2e4a7a87ac757
Response.BucketTable=1
Response.LegacyBucketId=108646897907
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=Prepar3D.exe
Sig[1].Name=Application Version
Sig[1].Value=3.4.14.18870
Sig[2].Name=Application Timestamp
Sig[2].Value=581239e2
Sig[3].Name=Fault Module Name
Sig[3].Value=FSUIPC4.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=4.9.5.8
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=5857240f
Sig[6].Name=Exception Code
Sig[6].Value=c0000005
Sig[7].Name=Exception Offset
Sig[7].Value=0001f044
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=10.0.14393.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
UI[2]=C:\Prepar3Dv3\Prepar3D.exe
UI[3]=A fatal error occurred.
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\Prepar3Dv3\Prepar3D.exe
LoadedModule[1]=C:\WINDOWS\SYSTEM32\ntdll.dll
LoadedModule[2]=C:\WINDOWS\System32\KERNEL32.DLL
LoadedModule[3]=C:\WINDOWS\System32\KERNELBASE.dll
LoadedModule[4]=C:\Program Files (x86)\AVG\Av\avghookx.dll
LoadedModule[5]=C:\WINDOWS\system32\apphelp.dll
LoadedModule[6]=C:\WINDOWS\AppPatch\AcGenral.DLL
LoadedModule[7]=C:\WINDOWS\System32\msvcrt.dll
LoadedModule[8]=C:\WINDOWS\System32\sechost.dll
LoadedModule[9]=C:\WINDOWS\System32\RPCRT4.dll
LoadedModule[10]=C:\WINDOWS\System32\SspiCli.dll
LoadedModule[11]=C:\WINDOWS\System32\CRYPTBASE.dll
LoadedModule[12]=C:\WINDOWS\System32\bcryptPrimitives.dll
LoadedModule[13]=C:\WINDOWS\System32\SHLWAPI.dll
LoadedModule[14]=C:\WINDOWS\System32\combase.dll
LoadedModule[15]=C:\WINDOWS\System32\ucrtbase.dll
LoadedModule[16]=C:\WINDOWS\System32\GDI32.dll
LoadedModule[17]=C:\WINDOWS\System32\gdi32full.dll
LoadedModule[18]=C:\WINDOWS\System32\USER32.dll
LoadedModule[19]=C:\WINDOWS\System32\win32u.dll
LoadedModule[20]=C:\WINDOWS\System32\ole32.dll
LoadedModule[21]=C:\WINDOWS\System32\OLEAUT32.dll
LoadedModule[22]=C:\WINDOWS\System32\msvcp_win.dll
LoadedModule[23]=C:\WINDOWS\System32\SHELL32.dll
LoadedModule[24]=C:\WINDOWS\System32\cfgmgr32.dll
LoadedModule[25]=C:\WINDOWS\System32\windows.storage.dll
LoadedModule[26]=C:\WINDOWS\System32\powrprof.dll
LoadedModule[27]=C:\WINDOWS\System32\advapi32.dll
LoadedModule[28]=C:\WINDOWS\System32\kernel.appcore.dll
LoadedModule[29]=C:\WINDOWS\System32\shcore.dll
LoadedModule[30]=C:\WINDOWS\System32\profapi.dll
LoadedModule[31]=C:\WINDOWS\SYSTEM32\UxTheme.dll
LoadedModule[32]=C:\WINDOWS\SYSTEM32\WINMM.dll
LoadedModule[33]=C:\WINDOWS\SYSTEM32\samcli.dll
LoadedModule[34]=C:\WINDOWS\SYSTEM32\MSACM32.dll
LoadedModule[35]=C:\WINDOWS\SYSTEM32\VERSION.dll
LoadedModule[36]=C:\WINDOWS\SYSTEM32\USERENV.dll
LoadedModule[37]=C:\WINDOWS\SYSTEM32\dwmapi.dll
LoadedModule[38]=C:\WINDOWS\SYSTEM32\urlmon.dll
LoadedModule[39]=C:\WINDOWS\SYSTEM32\WINSPOOL.DRV
LoadedModule[40]=C:\WINDOWS\SYSTEM32\MPR.dll
LoadedModule[41]=C:\WINDOWS\SYSTEM32\WINMMBASE.dll
LoadedModule[42]=C:\WINDOWS\SYSTEM32\iertutil.dll
LoadedModule[43]=C:\WINDOWS\SYSTEM32\bcrypt.dll
LoadedModule[44]=C:\WINDOWS\System32\IMM32.DLL
LoadedModule[45]=C:\Prepar3Dv3\api.dll
LoadedModule[46]=C:\WINDOWS\System32\WS2_32.dll
LoadedModule[47]=C:\WINDOWS\System32\CRYPT32.dll
LoadedModule[48]=C:\WINDOWS\System32\MSASN1.dll
LoadedModule[49]=C:\WINDOWS\SYSTEM32\MSVCP120.dll
LoadedModule[50]=C:\WINDOWS\SYSTEM32\MSVCR120.dll
LoadedModule[51]=C:\WINDOWS\SYSTEM32\Cabinet.dll
LoadedModule[52]=C:\WINDOWS\SYSTEM32\MSWSOCK.dll
LoadedModule[53]=C:\WINDOWS\SYSTEM32\WINHTTP.dll
LoadedModule[54]=C:\WINDOWS\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.14393.447_none_5507ded2cb4f7f4c\COMCTL32.dll
LoadedModule[55]=C:\Prepar3Dv3\acontain.dll
LoadedModule[56]=C:\Prepar3Dv3\ai_player.dll
LoadedModule[57]=C:\Prepar3Dv3\atc.dll
LoadedModule[58]=C:\Prepar3Dv3\controls.dll
LoadedModule[59]=C:\WINDOWS\System32\SETUPAPI.dll
LoadedModule[60]=C:\Prepar3Dv3\demo.dll
LoadedModule[61]=C:\Prepar3Dv3\DIS.dll
LoadedModule[62]=C:\Prepar3Dv3\facilities.dll
LoadedModule[63]=C:\Prepar3Dv3\fe.dll
LoadedModule[64]=C:\Prepar3Dv3\flight.dll
LoadedModule[65]=C:\Prepar3Dv3\fs-traffic.dll
LoadedModule[66]=C:\Prepar3Dv3\g2d.dll
LoadedModule[67]=C:\WINDOWS\System32\WLDAP32.dll
LoadedModule[68]=C:\Prepar3Dv3\g3d.dll
LoadedModule[69]=C:\Prepar3Dv3\gps.dll
LoadedModule[70]=C:\Prepar3Dv3\livingwater.dll
LoadedModule[71]=C:\Prepar3Dv3\main.dll
LoadedModule[72]=C:\WINDOWS\System32\COMDLG32.dll
LoadedModule[73]=C:\Prepar3Dv3\menus.dll
LoadedModule[74]=C:\Prepar3Dv3\multiplayer.dll
LoadedModule[75]=C:\Prepar3Dv3\pdk.dll
LoadedModule[76]=C:\Prepar3Dv3\panels.dll
LoadedModule[77]=C:\Prepar3Dv3\sim1.dll
LoadedModule[78]=C:\Prepar3Dv3\simscheduler.dll
LoadedModule[79]=C:\Prepar3Dv3\simprop.dll
LoadedModule[80]=C:\Prepar3Dv3\sound.dll
LoadedModule[81]=C:\Prepar3Dv3\symmap.dll
LoadedModule[82]=C:\Prepar3Dv3\terrain.dll
LoadedModule[83]=C:\Prepar3Dv3\util.dll
LoadedModule[84]=C:\Prepar3Dv3\visualfx.dll
LoadedModule[85]=C:\Prepar3Dv3\weather.dll
LoadedModule[86]=C:\Prepar3Dv3\window.dll
LoadedModule[87]=C:\WINDOWS\SYSTEM32\HID.DLL
LoadedModule[88]=C:\WINDOWS\SYSTEM32\DINPUT8.dll
LoadedModule[89]=C:\Prepar3Dv3\mplEasyBlendSDKDX11.dll
LoadedModule[90]=C:\WINDOWS\SYSTEM32\MFReadWrite.dll
LoadedModule[91]=C:\WINDOWS\SYSTEM32\MFPlat.DLL
LoadedModule[92]=C:\WINDOWS\SYSTEM32\dxgi.dll
LoadedModule[93]=C:\WINDOWS\SYSTEM32\d3d9.dll
LoadedModule[94]=C:\WINDOWS\SYSTEM32\d3d11.dll
LoadedModule[95]=C:\Prepar3Dv3\D3DCOMPILER_47.dll
LoadedModule[96]=C:\WINDOWS\SYSTEM32\OPENGL32.dll
LoadedModule[97]=C:\WINDOWS\SYSTEM32\GLU32.dll
LoadedModule[98]=C:\WINDOWS\SYSTEM32\d3dx9_43.dll
LoadedModule[99]=C:\WINDOWS\SYSTEM32\d3dx11_43.dll
LoadedModule[100]=C:\Prepar3Dv3\d3dcsx_47.dll
LoadedModule[101]=C:\WINDOWS\SYSTEM32\DSOUND.dll
LoadedModule[102]=C:\Prepar3Dv3\audiere.dll
LoadedModule[103]=C:\WINDOWS\SYSTEM32\D3DCOMPILER_43.dll
LoadedModule[104]=C:\WINDOWS\SYSTEM32\DDRAW.dll
LoadedModule[105]=C:\WINDOWS\SYSTEM32\DCIMAN32.dll
LoadedModule[106]=C:\WINDOWS\SYSTEM32\RTWorkQ.DLL
LoadedModule[107]=C:\Prepar3Dv3\language.dll
LoadedModule[108]=C:\WINDOWS\SYSTEM32\MSXML6.DLL
LoadedModule[109]=C:\WINDOWS\SYSTEM32\ntmarta.dll
LoadedModule[110]=C:\Prepar3Dv3\uiInterface.dll
LoadedModule[111]=C:\WINDOWS\SYSTEM32\mscoree.dll
LoadedModule[112]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\mscoreei.dll
LoadedModule[113]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
LoadedModule[114]=C:\WINDOWS\SYSTEM32\MSVCR120_CLR0400.dll
LoadedModule[115]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\mscorlib\40571abae9422cd2ca6fafbbde1c3cdc\mscorlib.ni.dll
LoadedModule[116]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\clrjit.dll
LoadedModule[117]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System\08da6b6698b412866e6910ae9b84f363\System.ni.dll
LoadedModule[118]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\PresentationCore\051a282e157a228405b2e0d867c3ce1d\PresentationCore.ni.dll
LoadedModule[119]=C:\WINDOWS\SYSTEM32\CRYPTSP.dll
LoadedModule[120]=C:\WINDOWS\system32\rsaenh.dll
LoadedModule[121]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\Presentatio5ae0f00f#\5272cb4aeec65bec2fffb45e9cb22910\PresentationFramework.ni.dll
LoadedModule[122]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Core\f6ebd52be27fe627fed0d185c6a9c0d5\System.Core.ni.dll
LoadedModule[123]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\WindowsBase\5751e969e4789e60d3ad463cb6024006\WindowsBase.ni.dll
LoadedModule[124]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Xaml\04c4f83e0b62ff553abff98943e45f42\System.Xaml.ni.dll
LoadedModule[125]=C:\WINDOWS\SYSTEM32\dwrite.dll
LoadedModule[126]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\WPF\wpfgfx_v0400.dll
LoadedModule[127]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\WPF\PresentationNative_v0400.dll
LoadedModule[128]=C:\WINDOWS\SYSTEM32\PROPSYS.dll
LoadedModule[129]=C:\WINDOWS\SYSTEM32\iphlpapi.dll
LoadedModule[130]=C:\WINDOWS\System32\NSI.dll
LoadedModule[131]=C:\WINDOWS\SYSTEM32\dhcpcsvc6.DLL
LoadedModule[132]=C:\WINDOWS\SYSTEM32\dhcpcsvc.DLL
LoadedModule[133]=C:\WINDOWS\SYSTEM32\ondemandconnroutehelper.dll
LoadedModule[134]=C:\WINDOWS\System32\MSCTF.dll
LoadedModule[135]=C:\WINDOWS\SYSTEM32\secur32.dll
LoadedModule[136]=C:\WINDOWS\SYSTEM32\DNSAPI.dll
LoadedModule[137]=C:\WINDOWS\System32\fwpuclnt.dll
LoadedModule[138]=C:\Windows\System32\rasadhlp.dll
LoadedModule[139]=C:\WINDOWS\system32\nvapi.dll
LoadedModule[140]=C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispiwu.inf_amd64_9ff5ab165faead52\nvwgf2um.dll
LoadedModule[141]=C:\WINDOWS\SYSTEM32\DEVOBJ.dll
LoadedModule[142]=C:\WINDOWS\System32\WINTRUST.dll
LoadedModule[143]=C:\WINDOWS\SYSTEM32\WTSAPI32.DLL
LoadedModule[144]=C:\WINDOWS\SYSTEM32\WINSTA.dll
LoadedModule[145]=C:\WINDOWS\System32\clbcatq.dll
LoadedModule[146]=C:\WINDOWS\system32\ntshrui.dll
LoadedModule[147]=C:\WINDOWS\system32\srvcli.dll
LoadedModule[148]=C:\WINDOWS\SYSTEM32\cscapi.dll
LoadedModule[149]=C:\WINDOWS\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.14393.447_none_89c64d28dafea4b9\comctl32.dll
LoadedModule[150]=C:\WINDOWS\system32\netutils.dll
LoadedModule[151]=C:\WINDOWS\System32\coml2.dll
LoadedModule[152]=C:\WINDOWS\system32\mssprxy.dll
LoadedModule[153]=C:\WINDOWS\SYSTEM32\LINKINFO.dll
LoadedModule[154]=C:\WINDOWS\System32\MMDevApi.dll
LoadedModule[155]=C:\WINDOWS\SYSTEM32\AUDIOSES.DLL
LoadedModule[156]=C:\WINDOWS\SYSTEM32\wintypes.dll
LoadedModule[157]=C:\WINDOWS\SYSTEM32\avrt.dll
LoadedModule[158]=C:\WINDOWS\SYSTEM32\XInput9_1_0.dll
LoadedModule[159]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\Presentatioaec034ca#\def8702c6e883330fb8cb8e3f5c5e665\PresentationFramework.Aero2.ni.dll
LoadedModule[160]=C:\WINDOWS\SYSTEM32\WindowsCodecs.dll
LoadedModule[161]=C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispiwu.inf_amd64_9ff5ab165faead52\nvd3dum.dll
LoadedModule[162]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Drawing\c2abcda8f96d67fa6ff5665fd21dddff\System.Drawing.ni.dll
LoadedModule[163]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Windows.Forms\c02fbf560e52a1aab432a90d4c613af4\System.Windows.Forms.ni.dll
LoadedModule[164]=C:\WINDOWS\SYSTEM32\wdmaud.drv
LoadedModule[165]=C:\WINDOWS\SYSTEM32\ksuser.dll
LoadedModule[166]=C:\WINDOWS\SYSTEM32\msacm32.drv
LoadedModule[167]=C:\WINDOWS\SYSTEM32\midimap.dll
LoadedModule[168]=C:\Prepar3Dv3\radar.dll
LoadedModule[169]=C:\Prepar3Dv3\VirtualReality.dll
LoadedModule[170]=C:\Prepar3Dv3\openvr_api.dll
LoadedModule[171]=C:\Prepar3Dv3\ControllableCamera.dll
LoadedModule[172]=C:\Prepar3Dv3\SimDirector.dll
LoadedModule[173]=C:\Prepar3Dv3\BGLCompLib.dll
LoadedModule[174]=C:\Prepar3Dv3\simpropext.dll
LoadedModule[175]=C:\Prepar3Dv3\PMDG\DLLs\PMDG_HUD_interface.dll
LoadedModule[176]=C:\WINDOWS\WinSxS\x86_microsoft.flightsimulator.simconnect_67c7c14424d61b5b_10.0.61259.0_none_55f5ecdc14f60568\SimConnect.dll
LoadedModule[177]=C:\WINDOWS\SYSTEM32\MSVCR100.dll
LoadedModule[178]=C:\WINDOWS\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.9268_none_d08e1538442a243e\MSVCR80.dll
LoadedModule[179]=C:\WINDOWS\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.9268_none_d08e1538442a243e\MSVCP80.dll
LoadedModule[180]=C:\WINDOWS\SYSTEM32\SHFOLDER.dll
LoadedModule[181]=C:\Prepar3Dv3\PMDG\DLLs\PMDG_Interface.dll
LoadedModule[182]=C:\Prepar3Dv3\RAASPRO\RAASPRO.dll
LoadedModule[183]=C:\WINDOWS\SYSTEM32\WININET.dll
LoadedModule[184]=C:\WINDOWS\SYSTEM32\WINNSI.DLL
LoadedModule[185]=C:\Program Files (x86)\Common Files\System\ado\msado15.dll
LoadedModule[186]=C:\WINDOWS\SYSTEM32\MSDART.DLL
LoadedModule[187]=C:\Program Files (x86)\Common Files\System\Ole DB\oledb32.dll
LoadedModule[188]=C:\WINDOWS\SYSTEM32\DPAPI.dll
LoadedModule[189]=C:\Windows\System32\comsvcs.dll
LoadedModule[190]=C:\Windows\System32\msjetoledb40.dll
LoadedModule[191]=C:\Windows\System32\msjet40.dll
LoadedModule[192]=C:\Windows\System32\msjter40.dll
LoadedModule[193]=C:\Windows\System32\mswstr10.dll
LoadedModule[194]=C:\Windows\System32\MSJINT40.DLL
LoadedModule[195]=C:\Windows\System32\mstext40.dll
LoadedModule[196]=C:\WINDOWS\SYSTEM32\mlang.dll
LoadedModule[197]=C:\WINDOWS\SYSTEM32\RAASAUDIO32.DLL
LoadedModule[198]=C:\WINDOWS\SYSTEM32\X3DAudio1_6.dll
LoadedModule[199]=C:\WINDOWS\System32\xactengine3_4.dll
LoadedModule[200]=C:\WINDOWS\System32\XAudio2_4.dll
LoadedModule[201]=C:\Prepar3Dv3\Gauges\TargetInfo.dll
LoadedModule[202]=C:\Prepar3Dv3\Gauges\Fury_1500.dll
LoadedModule[203]=C:\Prepar3Dv3\Modules\FSX-JoinD.dll
LoadedModule[204]=C:\WINDOWS\SYSTEM32\mfc100.dll
LoadedModule[205]=C:\WINDOWS\SYSTEM32\MSIMG32.dll
LoadedModule[206]=C:\WINDOWS\SYSTEM32\MFC100ENU.DLL
LoadedModule[207]=C:\Program Files\IvAp v2\ivap_fsx_bootstrap.dll
LoadedModule[208]=C:\WINDOWS\System32\PSAPI.DLL
LoadedModule[209]=C:\WINDOWS\SYSTEM32\MSVCP100.dll
LoadedModule[210]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Configuration\aa9c29b70b4cceab890eb841f89d73e9\System.Configuration.ni.dll
LoadedModule[211]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Xml\7532301b00fac8def2f526ca8b480e11\System.Xml.ni.dll
LoadedModule[212]=C:\WINDOWS\system32\dataexchange.dll
LoadedModule[213]=C:\WINDOWS\system32\dcomp.dll
LoadedModule[214]=C:\WINDOWS\system32\twinapi.appcore.dll
LoadedModule[215]=C:\WINDOWS\system32\msctfui.dll
LoadedModule[216]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\UIAutomationTypes\75ed56cf95fe6228472b5e57ac7a76b7\UIAutomationTypes.ni.dll
LoadedModule[217]=C:\WINDOWS\SYSTEM32\UIAutomationCore.dll
LoadedModule[218]=C:\WINDOWS\SYSTEM32\sxs.dll
LoadedModule[219]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Runteb92aa12#\213003369298faf75651a6b8981dce12\System.Runtime.Serialization.ni.dll
LoadedModule[220]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\SMDiagnostics\1b144b0155aa14719ac0b83f038abbd5\SMDiagnostics.ni.dll
LoadedModule[221]=C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\System.Servd1dec626#\d842ac6dc0b94d7516b2d43a62b8f4d7\System.ServiceModel.Internals.ni.dll
LoadedModule[222]=C:\WINDOWS\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.14393.321_none_baab3cb4359688b4\gdiplus.dll
LoadedModule[223]=C:\Prepar3Dv3\Carenavigraph.dll
LoadedModule[224]=C:\Prepar3Dv3\Modules\FSUIPC4.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=Lockheed Martin® Prepar3D®
AppPath=C:\Prepar3Dv3\Prepar3D.exe
ApplicationIdentity=00000000000000000000000000000000
MetadataHash=1432479682 -
Volker,
Once again thank you for your responses.
I have done that and I am happy to report that my FS Commander installation is running 100% as expected with all of my content restored.
Best regards
Alvaro Escorcia.
-
Thank you very much Volker; I really appreciate your dedication to fix my issue!.
Your solution worked!
I have 1 question, in what file or directory will I find quite a few VFR Waypoints I had uploaded into FS Commander and also other that I entered by hand?
I should have them because I saved everything I had in the FSC directory before I blanked it out.
Regards
Alvaro Escorcia
-
Volker,
I started the process to fix this as per your instructions by email.
I ran uninstall from windows control panel, but that did not remove FSC. It's still in the E\ directory and if I run it it still runs (bad) as before
Can you recommend a process to uninstall and cleanup all remains of FSC in Windows 7 before I proceed to install from scratch?
regards
Alvaro Escorcia
-
Volker,
You are correct - I had missed one character in the e-mail address.
I fixed this, re-sent and I hope you have received it now.
Regards
Alvaro Escorcia.
-
Thanks - I have sent it.
regards
Alvaro Escorcia
-
Hi Volker
Thank you very much for the quick response.
I have run FSc as admin, just as you indicated, but I still have the same problem. I can not see the FSC window running.... the only thing I see about FSC running is in the windows task manager; I see under processes Fsc.exe *32 and that's all. I don't even see it under applications running.
Regards
Alvaro Escorcia
-
Volker
Thank you for the info.
I installed last night the upgrade to the current version 9.6 rev1 hoping this fixed my problem, with no luck.
My problem now is that I can not see FSC running, although I think is running because I see a "process" running in the Windows-7 task-manager but ... I still can't see the FSC itself in neither of my 2 monitors. This is probably beyond the window on top.
I would very much appreciate some help before I try to uninstall and re-install everything in FSC. I would not like loosing the setup I had and also loosing way-points I had created.
By the way, I always make an effort to read instructions and the forum but this time I am at a loss
Thanks for your understanding
Regards
Alvaro Escorcia
Position of windows off visible range (solved)
in (Former) FS Commander Support Forum
Posted
Hi Volker
Thank you very much. That fixed the problem.
Regards
Alvaro Escorcia