Jump to content
The simFlight Network Forums

hanss

Members
  • Posts

    33
  • Joined

  • Last visited

Everything posted by hanss

  1. Hi Pete, thank you for the advice. I will try to do as you suggest and report back the result. regards Hans
  2. Thanks zoete for your quick response. It functions like a throttle. I haven't checked with A2A. I'm sorry to say. I thought there would be a macro or something in your program which I could make to work as turbo booster. In the manuals on the internet I only found how to program button assignments. I use the booster with my mouse now like an extra lever. But that is very inconvenient. Do you have a way to program this? regards Hans
  3. Hello, Is it possible to assign an axis to the turbo booster of the A2A P-47? If so, how do I do that? Where can I find the way to do it? Thank you very much for your help Hanss
  4. Thanks for the advise, I will follow your suggestion. Regards Hans
  5. Thanks. Very sorry to have misplaced the question. regards Hanss
  6. Hi all, After starting a flight, I sometimes experience that the view mode switches every 5 - 10 seconds from VC to outside view then to spot plane en back again in the same sequence. When I shut down FSX-E and start again, it does not happen anymore. Could somebody please advise how to prevent this? Thanks Hanss [Moved from FAQ suforum, so it can be answered! FAQ gathers the answers to frequently asked questions, and would not be the place folks would answer yours!]
  7. Pete, Thank you very much, I will try this and come back when it does not work. Great help :razz: Hanss
  8. Hello Pete, I am helping a friend to get on his way with FSX. He recently bought a Saitek Yoke set and FSUIPC, When assigning the different axis, one I cannot get to work properly. I am a bit desparate and am therefore seeking your help. The mixture goes from -16380 to 0 and no further, whatever I try. The other axis work fine. I have the fsuipc4 file enclosed. I have used my own file as a basis. Could you please help. Hanss FSUIPC4 john.txt
  9. Hello Pete, You were absolutely right. It is working fine now. Thank you very much Regards Hanss
  10. Thank you Pete, I will check in FS itself. Though I am pretty sure I have disabled the FS assignments. I will report back whwn I have found the problem and solved it. Regards Hanss
  11. Hello Pete, am a bit lost. I try to get my levers set for the capt sim C-130, however when I move in the cockpit itself my throttle 4 lever, the condition lever of engine nr 2 moves as well resulting in an engine shut down. I have attached the relevant parts of the ini file. Could you please help me? Thanks very much and not to forget Season's greetings Hanss [General] UpdatedByVersion=4853 History=JVMI637V6FY4AZAD0B4PI TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 Console=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=3 MinIce=-1 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=Yes ZeroElevForAPAlt=No ThrottleSyncAll=Yes WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=Yes LoadPlanMenu=No PauseAfterCrash=Yes BrakeReleaseThreshold=75 SaveDataWithFlights=Yes ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes EnableMouseLook=No AxesWrongRange=No InitDelay=0 GetNearestAirports=Yes LuaRerunDelay=66 MouseWheelMove=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes InitDelayDevicesToo=No OOMcheck=Yes FSVersionUsed="Microsoft Flight Simulator X",10.0.61472.0 SimConnectUsed=10.0.61259.0 [JoyNames] AutoAssignLetters=No 0=Saitek Pro Flight Quadrant 0.GUID={AE9C1310-DEC2-11DF-8001-444553540000} 1=Saitek Pro Flight Yoke 1.GUID={2C1833B0-D5FD-11DF-8001-444553540000} 2=Saitek Pro Flight Rudder Pedals 2.GUID={245B0AC0-D5FE-11DF-8001-444553540000} 3=Saitek Pro Flight Quadrant 3.GUID={F8383B30-EDC1-11DF-8001-444553540000} [WideServer] WideFSenabled=Yes [buttons] 1=R1,38,C66416,270 10=P1,18,C66079,0 11=P1,19,C66080,0 12=R3,0,C1061,0 14=R3,4,C1063,0 15=R0,0,C1064,0 17=P1,16,C65752,0 24=R1,17,C65564,0 27=R1,34,C66416,90 28=R1,35,C66416,135 30=R1,37,C66416,225 31=R1,39,C66416,315 32=P3,2,C1062,0 34=P1,0,C65791,0 36=R1,32,C66416,0 37=R1,33,C66416,45 38=R1,36,C66416,180 Buttonrepeat=20,10 [AutoSave] AutoSaveEnabled=No Next=1 Interval=60 Files=10 SaveOnGround=Yes [GPSout] GPSoutEnabled=No Port=COM1 Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=No ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No MaxThrottleForReverser=256 SteeringTillerControl=0 SyncSlopePropPitch2=29/26 FlapDetents=No ReverserControl=66292 [Profile.4 engine turbo prop] 1=CS C133Extra2 0 2=P-3C Orion Royal Netherland Navy 3=VickersViscount_800_KLM [Axes.4 engine turbo prop] 0=0X,256,D,12,0,0,0 1=0Y,256,D,13,0,0,0 2=0Z,256,D,14,0,0,0 3=1X,256,F,65695,0,0,0 4=1Y,256,F,65694,0,0,0 5=1Z,256,D,15,0,0,0 6=1U,256,D,16,0,0,0 7=1V,256,F,65921,0,0,0 8=1P,0,F,66416,0,0,0 9=2X,256,D,7,0,0,0 10=2Y,256,D,8,0,0,0 11=2R,256,F,65696,0,0,0 12=3X,1,D,9,0,0,0 13=3Y,256,D,10,0,0,0 14=3Z,256,D,11,0,0,0 [JoystickCalibration.4 engine turbo prop] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=No ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16380,-512,512,16380 Elevator=-16380,-512,512,16380 Rudder=-16380,-512,512,16380 SlopeRudder=15 PropPitch=0,0 LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 ReverserControl=66292 Throttle1=-16380,-512,0,16380 Throttle2=-16380,-512,0,16380 Throttle3=-16380,-512,0,16380 Throttle4=-16380,-512,0,16380 Mixture1=-16384,-512,512,16383/24 Mixture2=-16384,-512,512,16383/24 Mixture3=-16384,-512,512,16383/24 Mixture4=-16384,-512,512,16383/24 SyncSlopeMixture2=127/128 SyncSlopeMixture3=127/128 SyncSlopeMixture4=127/128 [buttons.4 engine turbo prop] 0=P1,2,C65607,0 1=P1,3,C65615,0 2=P1,4,C65758,0 3=P1,5,C65759,0 4=P1,6,C66278,0 5=P1,7,C66279,0 6=P3,0,C1061,0 7=P3,2,C1062,0 8=P3,4,C1063,0 9=P0,0,C1064,0 10=P1,18,C66079,0 11=P1,19,C66080,0 12=P1,16,C65752,0 13=P1,17,C65589,0 14=P1,0,C65791,0 15=P1,1,C65606,0
  12. Pete, You helped me tremendously. It is working as far as I can see now. Thanks again. Regards Hans
  13. Pete, I think I understand what you are saying. I won't hesitate to ask questions. However for the time being, I will first try out your suggestions. I will report back the results. Regards Hanss
  14. Thanks again Pete, I did not mean the instructions via the forum, but the instructions that go with the prgram. Anyway you have made it clear now. As I said, I will come back when I have tried it all out. Sorry for the misunderstanding. Your help is very much appreciated. Is there an example of the right settings available? Like one with reverse thrust or so? Regards Hanss
  15. Dear Pete, Thank you very much for the effort to read through my .ini file. I am not sure whether I follow your instructions in the book properly. To me it is more like a trial and error. I will try to get more precise and follow your advise on the input in my .ini file. Can I just change the lines in the file? To be honest, it is sometimes not easy to understand entirely what you mean in your instructions. A suggestion perhaps is that examples could enlighten it more. Thanks again. I will try to correct the file and will report back anyway. regards hanss
  16. Dear Pete, Thank you for your response, I had disabled all FS controllers. Below you find the ini file. I have installed the FSX version 4.827. Thanks again for helping me Regards Hanss [General] UpdatedByVersion=4827 History=4OQ1OKEXPMMDT06XKVO9H TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 Console=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=3 MinIce=-1 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=Yes ZeroElevForAPAlt=No ThrottleSyncAll=Yes WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=Yes LoadPlanMenu=No PauseAfterCrash=Yes BrakeReleaseThreshold=75 SaveDataWithFlights=Yes ZapSound=firework ShortAircraftNameOk=No UseProfiles=Yes EnableMouseLook=No AxesWrongRange=No InitDelay=0 GetNearestAirports=Yes LuaRerunDelay=66 MouseWheelMove=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes FSVersionUsed="Microsoft Flight Simulator X",10.0.61472.0 SimConnectUsed=10.0.61259.0 [JoyNames] AutoAssignLetters=No 0=Saitek Pro Flight Quadrant 0.GUID={AE9C1310-DEC2-11DF-8001-444553540000} 1=Saitek Pro Flight Yoke 1.GUID={2C1833B0-D5FD-11DF-8001-444553540000} 2=Saitek Pro Flight Rudder Pedals 2.GUID={245B0AC0-D5FE-11DF-8001-444553540000} 3=Saitek Pro Flight Quadrant 3.GUID={F8383B30-EDC1-11DF-8001-444553540000} [WideServer] WideFSenabled=Yes [buttons] ButtonRepeat=20,10 1=R1,38,C66416,270 4=R1,3,C65615,0 5=P1,32,C65875,0 6=R1,4,C65758,0 7=R1,5,C65759,0 8=R1,6,C66278,0 9=R1,7,C66279,0 10=P1,18,C66079,0 11=P1,19,C66080,0 12=R3,0,C1061,0 13=R3,2,C1062,0 14=R3,4,C1063,0 15=R0,0,C1064,0 16=P1,0,C65791,0 17=R1,16,C65752,0 23=R1,2,C65607,0 24=R1,17,C65564,0 25=P1,1,C65567,0 26=R1,33,C66416,45 27=R1,34,C66416,90 28=R1,35,C66416,135 29=R1,36,C66416,180 30=R1,37,C66416,225 31=R1,39,C66416,315 [AutoSave] AutoSaveEnabled=No Next=1 Interval=60 Files=10 SaveOnGround=Yes [GPSout] GPSoutEnabled=No Port=COM1 Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16380,0,0,0 Elevator=-16380,0,512,16380 Rudder=-16380,0,512,16380 Throttle=-16380,16380 Throttle1=-16384,-16384,-15970,16383 Throttle2=-16384,-16384,-15159,16383 SyncSlopeThrottle2=127/0 LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 PropPitch=0,0 SlopeRudder=15 [JoystickCalibration.Twin engine turbine] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=No ExcludeMixtureSet=Yes ExcludePropPitchSet=No SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16384,0,0,16383 Elevator=-16380,0,0,16380 Rudder=-16384,0,0,16383 Throttle=-16384,16384 Throttle1=-4096,0,0,16384 Throttle2=-4096,0,0,16384 Throttle3=-4096,0,0,16384 Throttle4=-4096,0,0,16384 PropPitch=-16384,16384 Mixture=-16384,16383 LeftBrake=-16383,16384/16 RightBrake=-16383,16384/16 PropPitch1=-4096,0,0,16384 PropPitch2=-4096,0,0,16384 PropPitch3=-4096,0,0,16384 PropPitch4=-4096,0,0,16384 SlopeLeftBrake=8 SlopeRightBrake=8 SyncSlopeThrottle4=26/0,127/33 SyncSlopeThrottle3=26/0 SlopeElevator=5 SyncSlopeThrottle2=0/0,26/33 SyncSlopePropPitch2=0/0 SyncSlopePropPitch3=26/0 SyncSlopePropPitch4=26/0 SlopeRudder=-2 SlopeThrottle1=-2 [Axes] 0=0X,256,D,12,0,0,0 1=0Y,256,D,13,0,0,0 2=0Z,256,D,18,0,0,0 3=1X,256,F,65695,0,0,0 4=1Y,256,F,65694,0,0,0 5=1Z,256,D,19,0,0,0 6=1U,256,D,20,0,0,0 7=1P,0,F,66416,0,0,0 8=2X,256,D,7,0,0,0 9=2Y,256,D,8,0,0,0 10=2R,256,F,65696,0,0,0 11=3X,1,D,9,0,0,0 12=3Y,256,D,10,0,0,0 13=3Z,1,D,6,0,0,0 [Axes.Twin engine turbine] 0=0X,256,D,12,0,0,0 1=0Y,1,D,17,0,0,0 2=0Z,1,D,18,0,0,0 3=1X,32,D,1,0,0,0 4=1Y,642,D,2,0,0,0 5=1Z,256,F,65695,0,0,0 6=1V,256,D,6,0,0,0 7=1P,0,F,66416,0,0,0 8=2X,256,D,7,0,0,0 9=2Y,256,D,8,0,0,0 10=2R,256,D,3,0,0,0 11=3X,1,D,9,0,0,0 12=3Y,1,D,10,0,0,0 13=3Z,256,D,9,0,0,0 [sounds] Path=E:\FSX\Sound\ Device1=Primair geluidsstuurprogramma Device2=Luidsprekers (2- Realtek High Definition Audio) Device3=Realtek Digital Output (2- Realtek High Definition Audio) Device4=SyncMaster-1 (NVIDIA High Definition Audio) [buttons.Twin engine turbine] 0=P1,2,C65607,0 1=U1,2,C65615,0 2=P1,5,C65595,0 3=U1,5,C0,0 4=P1,4,C65603,0 [JoystickCalibration.Single engine piston aircraft] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16380,0,0,16380 Elevator=-16380,0,0,16380 Rudder=-16380,-512,512,16380 Throttle=-16380,16383 PropPitch=-16384,16383 SlopeAileron=2 SlopeElevator=2 SlopeRudder=15 LeftBrake=-16384,16383/16 SlopeLeftBrake=15 RightBrake=-16384,16383/16 SlopeRightBrake=15 Mixture=-16380,16383 SlopePropPitch=2 [Profile.Beech King Air 350 Paint1] 1=Beech King Air 350 Paint1 [Profile.Single engine piston aircraft] 1=Cessna Skyhawk 172SP Paint4 2=VMA-312 3=Piaggio P-149D 4=PC7 Solo 5=Warbirdsim P-51D Mustang "Little Friends - The Millie G" [Profile.Twin engine turbine] 1=Twin engine turbine 2=Fairchild C119 N401GB SCA Cargo [Axes.Single engine piston aircraft] 0=0X,256,D,12,0,0,0 1=0Y,256,D,17,0,0,0 2=0Z,256,D,18,0,0,0 3=1X,256,D,1,0,0,0 4=1Y,256,D,2,0,0,0 5=1Z,256,D,1,0,0,0 6=1V,256,D,1,0,0,0 7=1P,0,F,66416,0,0,0 8=2X,1,D,7,0,0,0 9=2Y,256,D,8,0,0,0 10=2R,64,D,3,0,0,0 11=3X,1,D,4,0,0,0 12=3Y,256,D,5,0,0,0 13=3Z,256,D,6,0,0,0 [buttons.Single engine piston aircraft] 0=U3,6,C65967,0 1=U3,6,C66635,0 2=P3,8,C65967,0 3=P1,6,C65752,0 4=P1,7,C65570,0 5=P1,4,C65758,0 6=P1,5,C65759,0 7=P1,0,C65791,0 8=P1,36,C65678,0 9=R1,2,C65607,0 10=R1,3,C65615,0 [Profile.Single engine jet] 1=A-7H Corsair II Hellenic Air Force FOX Air Interdiction [buttons.Single engine jet] 0=U3,6,C65967,0 1=U3,6,C66635,0 2=P3,8,C65967,0 3=P1,6,C65752,0 4=P1,7,C65570,0 5=P1,4,C65758,0 6=P1,5,C65759,0 7=P1,0,C65791,0 8=P1,36,C65678,0 9=R1,2,C65607,0 10=R1,3,C65615,0 [Axes.Single engine jet] 0=0X,256,D,12,0,0,0 1=0Y,256,D,17,0,0,0 2=0Z,256,D,18,0,0,0 3=1X,256,D,1,0,0,0 4=1Y,256,D,2,0,0,0 5=1Z,256,D,1,0,0,0 6=1V,256,D,1,0,0,0 7=1P,0,F,66416,0,0,0 8=2X,1,D,7,0,0,0 9=2Y,256,D,8,0,0,0 10=2R,64,D,3,0,0,0 11=3X,1,D,4,0,0,0 12=3Y,256,D,5,0,0,0 13=3Z,256,D,6,0,0,0 [JoystickCalibration.Single engine jet] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16380,0,0,16380 SlopeAileron=2 Elevator=-16380,0,0,16380 SlopeElevator=2 Rudder=-16380,0,0,16380 SlopeRudder=2 Throttle=-16380,16383 PropPitch=-16384,16383 SlopePropPitch=2 Mixture=-16380,16380 LeftBrake=-16384,16383/16 SlopeLeftBrake=2 RightBrake=-16384,16383/16 SlopeRightBrake=2 [Profile.Twin engine jet] 1=Learjet60_C-FBCD 2=1GR Me262B-U1 Night Schwalbe Red12 3=Fokker 100 KLM PH-OFF [Axes.Twin engine jet] 0=0X,256,D,14,0,0,0 1=0Y,256,D,17,0,0,0 2=0Z,256,D,18,0,0,0 3=1X,256,F,65695,0,0,0 4=1Y,256,F,65694,0,0,0 5=1Z,256,D,19,0,0,0 6=1U,256,D,20,0,0,0 7=1P,0,F,66416,0,0,0 8=2X,256,D,7,0,0,0 9=2Y,256,D,8,0,0,0 10=2R,256,F,65696,0,0,0 11=3X,1,D,9,0,0,0 12=3Y,256,D,10,0,0,0 13=3Z,256,D,13,0,0,0 [JoystickCalibration.Twin engine jet] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=No ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16380,0,512,16380 Elevator=-16380,0,512,16380 Rudder=-16380,0,512,16380 Throttle=-16380,16380 Throttle1=-16384,-16384,-16384,16383 Throttle2=-16384,-16384,-15159,16383 SyncSlopeThrottle2=26/26,127/26 LeftBrake=-16384,16383/16 SlopeLeftBrake=2 RightBrake=-16384,16383/16 SlopeRightBrake=2 Reverser=-16380,16380 [Profile.Twin engine piston aircraft] 1=Beech Baron 58 Paint1 2=Beech King Air 350 Paint3 3=ALPHA F7F-3 Tigercat 4=B-25J "Axis Nightmare" 5=de Havilland Canadian Twin Otter WA 6=de Havilland Canadian Twin Otter para 7=B-25J 'Mimi' 8=B-25J Heavenly Body [Axes.Twin engine piston aircraft] 0=0X,256,D,18,0,0,0 1=0Y,256,D,13,0,0,0 2=0Z,256,D,14,0,0,0 3=1X,33,F,65695,0,0,0 4=1Y,1,F,65694,0,0,0 5=1P,0,F,66416,0,0,0 6=2X,256,F,66387,0,0,0 7=2Y,256,F,66388,0,0,0 8=2R,256,F,65764,0,0,0 9=3X,256,F,65820,0,0,0 10=3Y,256,F,65821,0,0,0 11=3Z,1,D,17,0,0,0 [JoystickCalibration.Twin engine piston aircraft] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=No ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16380,-512,512,16380 Elevator=0,0,0,0 Rudder=-16380,0,512,16380 Throttle=-16380,16380 Throttle1=-16380,-512,512,16380/32 Throttle2=-16380,-512,512,16380/32 Mixture1=-16384,1408,1408,16383/32 Mixture2=-16384,-273,-273,16383/32 LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 PropPitch1=-16384,0,512,16380/32 PropPitch2=-16384,0,512,16380/32 SlopeElevator=5 SlopeLeftBrake=3 SlopeRightBrake=3 SlopeRudder=15 SyncSlopeMixture2=65/74 Reverser=-16380,16380 SlopeAileron=5 [buttons.Twin engine piston aircraft] 0=R1,7,C66279,0 1=R1,6,C66278,0 2=P1,0,C65791,0 3=R1,4,C65758,0 4=U1,4,C65758,0 5=R1,5,C65759,0 6=U1,5,C65759,0 7=U1,6,C66278,0 8=U1,7,C66279,0 9=R1,2,C65607,0 10=U1,2,C65607,0 11=R1,3,C65615,0 12=U1,3,C65615,0 13=P3,0,C1061,0 14=P3,2,C1062,0 15=R1,18,C65570,0 16=U1,18,C65570,0 17=R1,19,C65589,0 18=U1,19,C65589,0 19=P1,16,C65752,0 20=P1,32,C65674,0 21=P1,33,C65675,0 22=P1,34,C0,0 23=P1,35,C65677,0 24=P1,36,C65678,0 25=P1,37,C65679,0 26=P1,38,C65680,0 27=P1,39,C65681,0 [buttons.Beech King Air 350 Paint1] 0=R1,7,C66279,0 [Axes.Beech King Air 350 Paint1] 0=0X,256,D,18,0,0,0 1=0Y,256,D,14,0,0,0 2=0Z,256,D,14,0,0,0 3=1X,256,F,65695,0,0,0 4=1Y,256,F,65694,0,0,0 5=1Z,256,D,19,0,0,0 6=1U,256,D,20,0,0,0 7=1P,0,F,66416,0,0,0 8=2X,256,D,7,0,0,0 9=2Y,256,D,8,0,0,0 10=2R,256,F,65696,0,0,0 11=3X,1,D,9,0,0,0 12=3Y,256,D,10,0,0,0 13=3Z,1,D,17,0,0,0 [JoystickCalibration.Beech King Air 350 Paint1] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16380,0,512,16380 Elevator=-16380,0,512,16380 Rudder=-16380,0,512,16380 Throttle=-16380,16380 LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 Throttle1=-16384,-16384,-16384,16383 Throttle2=-16384,-16384,-15159,16383 SyncSlopeThrottle2=127/0 [Profile.four engine piston] 1=Virtavia B-24J Satan's Gal 2=Virtavia B-24D Strawberry Bitch 3=Virtavia B-24J Cocktail Hour [Axes.four engine piston] 0=0X,256,D,12,0,0,0 1=0Y,256,D,17,0,0,0 2=0Z,256,D,18,0,0,0 3=1X,256,F,65695,0,0,0 4=1Y,256,F,65694,0,0,0 5=1Z,256,D,19,0,0,0 6=1U,256,D,20,0,0,0 7=1V,256,D,6,0,0,0 8=1P,0,F,66416,0,0,0 9=2X,256,D,7,0,0,0 10=2Y,256,D,8,0,0,0 11=2R,256,F,65696,0,0,0 12=3X,1,D,9,0,0,0 13=3Y,256,D,10,0,0,0 14=3Z,1,D,11,0,0,0 [buttons.four engine piston] 0=P3,0,C1061,0 [Profile.Twin engine turboprop] 1=de Havilland Canadian Twin Otter AM [Axes.Twin engine turboprop] 0=0X,256,D,18,0,0,0 1=0Y,256,D,13,0,0,0 2=0Z,256,D,14,0,0,0 3=1X,256,F,65695,0,0,0 4=1Y,256,F,65694,0,0,0 5=1Z,256,D,19,0,0,0 6=1U,256,D,20,0,0,0 7=1P,0,F,66416,0,0,0 8=2X,256,D,7,0,0,0 9=2Y,256,D,8,0,0,0 10=2R,256,F,65696,0,0,0 11=3X,1,D,9,0,0,0 12=3Y,256,D,10,0,0,0 13=3Z,1,D,17,0,0,0 [JoystickCalibration.Twin engine turboprop] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=No ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16380,0,0,0 Elevator=-16380,0,512,16380 Rudder=-16380,0,512,16380 SlopeRudder=15 Throttle=-16380,16380 PropPitch=0,0 LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 Throttle1=-16384,-14384,-11246,16383 Throttle2=-16384,-14384,-11384,16383 Mixture1=-16384,-14384,-11384,16383 Mixture2=-16384,-14384,-11384,16383 PropPitch1=-16384,-14384,-11384,16383 PropPitch2=-16384,-14384,-11384,16383 SyncSlopePropPitch2=29/26 [buttons.Twin engine turboprop] 0=P1,14,C66701,0
  17. Hello Peter, My mixture axis keeps on moving up and down on the aeroplane. P-51 or FSX C-172. It prevents me from keeping the engine running. According to the calibration window in FSUIPC it should work. However in the cockpit it keeps moving from full rich to cut off. This occurs since to-day. Nothing has been changed except that I also assigned, under another profile, this muxture axis to function as a propellor axis. Could you please help? Thanks Hanss
  18. Hello Peter, Could you please tell me how I can program incremental or decreasing flap sttings on my Saitek Yoke. I have programmed switch B1 as flap increase and B2 as flap setting decrease. It works, but only to full or flaps zero, no steps in between. Thanks in advance Hanss
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.