23chantry23

Hi Prosim is asking for fsuipc but when I start the fsuipc it is referring to P3D which was previously on my system. I am now using Xplane. At one point it points to "bypass" and then asks for an exe. I don't understand what is going on or how to rectify the problem. I have read the manual as far as I am able to understand it. Your help would be appreciated. M Cumming

Thanks Thomas To date I have bought fsuipc 6 times and Widefs 3 times. It’ll help Pete in his retirement.

Hi I have been using fsuipc for over twenty years but still have difficulties installing. I have made numerous unnessessary purchases too. In P3d addons/fsuipc It says to use the installer to register Widefs. What and where is this installer? I have installed Widefs on a client. I’m confused.

Could you confirm if cpflight MCP, PM mcp, and fsuipc 5 are compatible Thank you M Cumming

MOVED FROM USER CONTRIBUTIONS SUBFORUM! Hi Pete Where can I find the how to write the command for a program to start in wideclient Regards Martin

I have fsuipc5 but cannot find the file for widefs client. Help would be appreciated.

Hi Pete I hope this is in the right place. While trying to edit my simconnect xml file I accidently wiped it clean. Can you tell me how to re create the file. I am using it for FSX FDS radio modules.

Thanks Pete. It was that darn firewall rearing it’s ugly head again Martin

Hi Pete I have problems with Wideserver and client. The client says it has version 0 so I presume I have mismatch. My wideserver is 7.974. And client 6.999. Is this a mismatch? On your page I couldn’t find widefs 7.974. Please advise. Martin

Bang on Target Pete! I restored files from a month back and unknowingly the firewall was operative. Many thanks

Thanks Pete ********* WideServer.DLL Log [version 7.955c] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 05/12/16, Time 18:51:40.629: Server name is SERVER 15694 Initialising TCP/IP server 15694 Initialising UDP/IP server 16099 Broadcasting service every 1000 mSecs ********* WideClient Log [version 6.999n] Class=FS98MAIN ********* Date (dmy): 06/12/16, Time 10:59:08.921: Client name is CLIENT2 3938 LUA: "C:\Wideclient\Initial.LUA": not found 4266 Attempting to connect now 4266 Trying to locate server: Protocol not yet decided 4266 Failed to connect: waiting to try again 6281 Attempting to connect now 16422 Server = SERVER 16438 Trying TCP/IP host "SERVER" port 8002 ... 16438 ... Okay, IP Address = 192.168.137.1 24297 New Client Application: "pmsystems" (Id=2216) 37453 Error on client pre-Connection Select() [Error=10060] Connection timed out 37453 Ready to try connection again 39484 Attempting to connect now 39484 Server = SERVER 39484 Trying TCP/IP host "SERVER" port 8002 ... 39484 ... Okay, IP Address = 192.168.137.1

Thanks Pete..... My problem is then with widefs. Non of my clients are connecting. They were. From time to time I get this problem and can never remember how it was solved. I'll start with updating fsuipc. Network is fine.

MOVED TO THE SUPPORT FORUM I am unsure how to use this forum. I could find no heading " New topics".. My fsuipc appears not to working. Can you help?********* FSUIPC4, Version 4.955c (14th June 2016) by Pete Dowson ********* Windows version reported as 6.1.?.7601 fsx.exe version = 10.0.61637.0 Reading options from "C:\FSX\Modules\FSUIPC4.ini" Running inside FSX on Windows 7 Module base=63F50000 User Name="Martin Cumming" User Addr="chantry23@vfast.co.uk" User WideFS Addr="chantry23@btinternet.com" FSUIPC4 Key is provided WideFS7 Key is provided 16 System time = 05/12/2016 18:51:18 16 FLT UNC path = "\\SERVER\FSPLANS\" 16 ------ Module Version Check ------ 16 acontain.dll: 10.0.61637.0 16 api.dll: 10.0.61637.0 16 controls.dll: 10.0.61637.0 16 fs-traffic.dll: 10.0.61637.0 16 G3D.dll: 10.0.61637.0 16 language.dll: 10.0.61637.0 16 sim1.dll: 10.0.61637.0 16 visualfx.dll: 10.0.61637.0 16 weather.dll: 10.0.61637.0 16 window.dll: 10.0.61637.0 16 ---------------------------------- 47 Trying to connect to SimConnect Acc/SP2 Oct07 ... 63 FS UNC path = "\\SERVER\FSX2\" 359 ---------------------- Joystick Device Scan ----------------------- 359 ------------------------------------------------------------------- 375 LogOptions=00000000 00000001 375 ------------------------------------------------------------------- 375 ------ Setting the hooks and direct calls into the simulator ------ 375 --- CONTROLS timer memory location obtained ok 375 --- SIM1 Frictions access gained 375 --- FS Controls Table located ok 375 --- Installed Mouse Macro hooks ok. 375 --- Wind smoothing fix is fully installed 375 --- G3D.DLL fix attempt installed ok 375 --- All links checked okay 375 ------------------------------------------------------------------- 375 SimConnect_Open succeeded: waiting to check version okay 375 Trying to use SimConnect Acc/SP2 Oct07 2028 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 2028 Initialising SimConnect data requests now 2028 FSUIPC Menu entry added 2044 \\SERVER\FSPLANS\egkk.FLT 2044 \\SERVER\FSX2\SimObjects\Airplanes\B737_800\Boeing737-800.AIR 20171 System time = 05/12/2016 18:51:39, Simulator time = 18:51:20 (18:51Z) 20171 Aircraft="Boeing 737-800 BRITISH AIRWAYS" 21653 Starting everything now ... 21653 Run: "C:\OpusFSI\FSISERVER.exe" 21653 FSUIPC couldn't run: "C:\" [Error=5] 32511 Advanced Weather Interface Enabled 40498 Weather Mode now = Custom 40654 Weather Mode now = Theme 40654 Weather Mode now = Custom

I've got most sorted in fs ok, except the rudder which is locked to one side. I need to assign the rudder and tiller in fs but not sure how to do this as I am not using pedals. Believe me I have read every tutorial on this that I can find. Everything was fine for 10 years until a re-install! Standard.XML FSUIPC4.ini

Pete I've been at this for three weeks now so I shall try to assign in fs and see if I do any better. How can I be sure that fsuipc is not inputing?

Hi Pete I have spent half an hour trying to find the correct heading under which to post this. I see no heading for support. I can't even find the posts I made yesterday! I still have problems with programming. I programmed the Ailerons on X ok but when I tried to do the same for the elevator it would not give me a Y axis. I have disabled the controllers in fs. regards Martin

Thank you Pete, I'll see how it goes. Sorry I posted in the wrong section. I was quite unaware of this. At my age one becomes unaware of a lot of things!

MOVED TO SUPPORT FORUM! Hi Pete I am having problems with programming. I am using FSX. My yoke is programmed in FSX. I am trying to program the tiller in fsuipc but it is shuddering violently. In fsuipc the tiller uses X but I notice in fsx it uses z. I have tried deleting it in controls but it hasn't helped. I have read every post on the subject but am none the wiser. Your assistance would be appreciated.

MOVED FROM SUBFORUM TO SUPPORT FORUM and RE-TITLED! Hi Pete I have added another client to the network but cannot get widefs started. I downloaded 6.78. Your help would be appreciated. The log says need details from server broadcast. Trying to locate server

Hi Pete. Hope this is ok. ********* FSUIPC4, Version 4.90 by Pete Dowson ********* Running inside FSX on Windows 7 Module base=0BD50000 User Name="Martin Cumming" User Addr="chantry23@vfast.co.uk" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 20935 System time = 29/08/2013 09:10:51 20935 FLT path = "C:\Users\Martin\Documents\Flight Simulator X Files\" 21247 Trying to connect to SimConnect Acc/SP2 Oct07 ... 21263 FS path = "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\" 21575 LogOptions=00000000 00000001 21575 SIM1 Frictions access gained 21575 Wind smoothing fix is fully installed 21575 G3D.DLL fix attempt installed ok 21575 SimConnect_Open succeeded: waiting to check version okay 21575 Trying to use SimConnect Acc/SP2 Oct07 24539 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 24539 Initialising SimConnect data requests now 24539 FSUIPC Menu entry added 24601 C:\Users\Martin\Documents\Flight Simulator X Files\egkk.FLT 24601 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\pmFlight-737NG\B737-3A00A.AIR 41917 System time = 29/08/2013 09:11:12, Simulator time = 09:10:53 (08:10Z) 41917 Aircraft="737-700-pmflight 2D" 42900 Starting everything now ... 43025 FollowMe service initialised and ready ... 459157 Sim stopped: average frame rate for last 418 secs = 22.9 fps 463104 System time = 29/08/2013 09:18:13, Simulator time = 09:10:53 (08:10Z) 463104 *** FSUIPC log file being closed Average frame rate for running time of 418 secs = 22.9 fps G3D fix: Passes 17566, Null pointers 0, Bad pointers 0, Separate instances 0 Memory managed: 4 Allocs, 4 Freed ********* FSUIPC Log file closed ***********

Hi Pete fsuipc log. A small, beginning... Found FSX.CFG in "C:\Users\Martin\AppData\Roaming\Microsoft\FSX\FSX.CFG" Now checking DLL.XML ... ... There is a previous DLL.XML, checking for FSUIPC4 section. ... FSUIPC4 section already exists but will be replaced. (for FSUIPC4, without Loader) ... FSUIPC4 section of DLL.XML written okay Now checking for a SimConnect.XML file ... ... No SimConnect.XML file found. This is okay. Looking in "C:\Users\Public\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\UpdatusUser\AppData\Roaming" ... No FSX.CFG there "Modules\FSUIPC Documents" folder already exists. Now installing additional files into the "Modules\FSUIPC Documents" folder: Installed "FSUIPC4 User Guide.pdf" okay Installed "FSUIPC4 for Advanced Users.pdf" okay Installed "FSUIPC4 History.pdf" okay Installed "List of FSX controls.pdf" okay Installed "FSUIPC Lua Library.pdf" okay Installed "FSUIPC Lua Plug-Ins.pdf" okay Installed "Lua License.pdf" okay Installed "Lua Plugins for VRInsight Devices.pdf" okay Installed "LuaFileSystem.pdf" okay Installed "Example LUA plugins.zip" okay Installed "Offset Mapping for PMDG 737NGX.pdf" okay Installed "FSUIPC4 Offsets Status.pdf" okay

Thanks!

I am unable to send fsuipc log as the paste is grey out. The event viewer I am unable to interpret/workout. DBS have not answered emails for the last 4 days. I have not edited the XML s I wouldn't be able to find it or have reason to change it. I'm afraid a lot of this is beyond me.

Pete I have completely re- loaded fsx. The fsuipc installed ok and fsx loaded without problem. I then downloaded the DBS follow me car. The car did not appear in addon ons as it should but from then on whenever I start fsx I get the message about a problem with third party software and I am asked if I want to continue (the usual message). I have removed the car but am back to square one with the warning message and hanging fsx...... Martin

Sorry Pete but I have searched everywhere for simconnect but cannot find it. The event viewer seems to contain nothing. I have the fsuipc log but guess that's no good without the others. Martin