[VRInsight MCP v2 Boeing]

Help required

I have a new PC windows 11, Prepar3d v4.5 Linda 3.3.5. PMDG 777.

My VRInsight MCP worked very well on my old PC windoews 10, unfortunately I can't get it working on my new PC I get the attached error when I try to run VRInsight sofrtware after instalation 

Linda everything ok when running and synced to prepar3d and PMDG 777

Any help would be appreciated.

edmundo019

[Flaps setting using detents centre numbers not changing]

Hi John 

Thank you for looking through the ini and for the advice ref VRInsight.

With the flaps I found the ini file on my old drive with fsuipc6 on and copied  the the flap setting into the the ini.

Many thanks for your help

Kind regards

Dave 

[Flaps setting using detents centre numbers not changing]

Hi John

Thank you for your help, I have managed to get the Flaps with detents working now on my PMDG 777.

I have a VRInsight MCP 2 Linda 3.3.5 reports VRInsight not found in fsuipc I know its not your software but when you were looking at my fsuipc.ini files did you notice anything wrong that may give me the VRInsight not found in Linda.

Unfortunately there is no support for Linda anymore.

Once again thank you and Pete for fsuipc  and Wide fs

Many thanks

Dave.

[Flaps setting using detents centre numbers not changing]

Hi John

Thank you for your reply

I have just finished a flight these are the attached files from the logging tab folder Hopefully these are the ones you want

Kind regards

Dave

FSUIPC6.ini FSUIPC6.log InstallFSUIPC6.log

[Flaps setting using detents centre numbers not changing]

Hi John

Thank you for your help with this.

I am unable to find the log file I looked in the G:prepar3d Modules folder only Configurations settings. I have attached file from C:\Users\Documents\Prepar3dV4Addons\fsuipc

And File from G:\Prepar3d\Modules\fsuipc6

In VC when moving the flap lever to flaps 1 there is no movement.

In VC when moving flap lever to flaps 5, flap lever moves to flaps 1.

In VC when moving flaps lever to flaps 15, flaps lever moves to flaps up.

In VC when moving flaps lever to flaps 20. flap lever moves to flap1 

In VC when moving flaps lever to flaps 25, flap lever moves to flaps 15.

In VC when moving flaps lever to flaps 30, flap lever moves to flaps 25.

When I move flaps lever to flaps up, In VC the flap lever moves to flaps up.

Hope this makes sense to you

Kind regards

Dave.

FSUIPC6.ini FSUIPC6.ini

[Flaps setting using detents centre numbers not changing]

Hi John.

I have attached my FSUIPC.ini file 

I am still trying to get my Flaps working with my PMDG 777 which I did have working on my previous PC

I can get the flaps with detents somewhat working but not all the way to full flaps, I was hoping you may see why in the ini file

Many thanks 

 

Dave 

FSUIPC6.ini

[Flaps setting using detents centre numbers not changing]

Hi John

 

Thank you for your reply, I have had all this working on my previous machine running windows 10, I have been trying on this for a while sometimes the small spin wheel won't even change to the next flap setting. I guess I will have to learn how to assign custom controls.

Many thanks

Dave 

[Flaps setting using detents centre numbers not changing]

Prepar3d, windows 11, PMDG 777-200, FSUIPCV6, Linda 3.5.5.

 

I am trying to set flap detents on my pmdg 777 using fsuipc 6 registered version however when following the guide the centre numbers are not changing through the range as I move the flap lever and press the centre set button either side of the detent

Please any help would be appreciated

kind regard

Dave

[FSUIPC update 4.4.949]

Thanks for your help Pete, I have FSUIPC working again, I just have to sort out Linda. Many Thanks, 

[FSUIPC update 4.4.949]

Hi Pete,

 

Looking forward, My Flght sim PC has 3 drives 1 SSD with windows 7 on. 2 Western Digital Raptors one with FSX on and one with scenery on.

 

However the SSD with windows on only has 16GB of space left on it, Rather than spending time now trying to sort out my problems do you think I would be better changing my SSD for a new 1 Tb drive and having Operating system and FSX on the same drive. Then Install FSUIPC, Linda, and all of my hardware, I know its a lot work, but hopefully I will be heading in the right direction, below is a spec of my PC at the moment, and is there any advice you could add.

 

Many thanks.

 

   

Flight sim  PC Build Spec

 

 

Operating system Windows 7 Pro 64bt

Processor  Intel Core I7-980X Hexa Gulftown

P C Case  Lian li PC-V1000 plus Aluminium case

Motherboard Asus P6T Delux V2 X58

Memory Mushkin 6GB Low Latency

Heatsink , Titan Fenrir Evo

SSD Drive OCZ Vertex  3 Windows 7 Professional OS

Hard Drive western Digital Raptor 300 GB Microsoft FSX

Hard Drive Western Digital Raptor 150 GB 

Graphics Card EVGA GeForce GTX 580 1536MB GDDR5

Sound Card Creative X-Fi Titanium Fatality Professional

Optical Drive Pioneer DVR116DBK

Blue  Ray 4 BD ROM, LITE ON

Power Supply BFG ES 800 Watt

Saitek Pro Flight yoke & Throttle

Monitors

Dell 27” U2711 Ultra sharp

Dell 24”             Ultra sharp

Dell 17” Flat Panel

                                                                                                                                                                                 

Throttle now Go flight TQ6.

[FSUIPC update 4.4.949]

Hi Pete,

Thanks for your reply.

 

I will over the weekend try uninstalling the joystick/yoke from the device manager. 

 

Connected I have

 

Saitek Yoke axis assigned and Calibrated through FSUIPC

Go Flight TQ6 Throttle Quad Axis assigned and calibrated through  FSUIPC

Go flight landing gear and flaps module.

Go flight switch panel not used,(have not yet managed to get it to work with PMDG 777.

Go flight Engine start module used with default 737, not managed to get it working on PMDG 777

VRinsight MCP combo 2 Boeing set up through Linda (until I tried updating Linda.) All worked fine before update.

 

Many thanks Pete.

[FSUIPC update 4.4.949]

Thanks Pete,

 

I have spent all day today with this and not sure where to go next, If I double click the Linda.exe in the modules folder Linda  runs but does not find FSUIPC. The Joystick and throttle have not been removed, any ideas why they are not recognized. Com 3 is where the device manager shows the VRI is. Thank you for your help, although I dont know what to do next. Many thanks.

[FSUIPC update 4.4.949]

Hi Pete. FSUIPC.ini file below

 

[General]
UpdatedByVersion=4949
History=PJ41IMHKQPA0LES5G71MF
InitDelayDevicesToo=No
NewInterceptTextMenu=No
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=Yes
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=Yes
FixMachSpeedBug=No
DeleteVehiclesForAES=Yes
AutoScanDevices=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=Yes
SuppressCloudTurbulence=No
MaxIce=-1
MinIce=-1
UpperWindGusts=No
SuppressWindTurbulence=Yes
SuppressWindVariance=Yes
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=Yes
WindSmoothing=Yes
WindSmoothness=1
WindSmoothAirborneOnly=Yes
PressureSmoothness=20
TemperatureSmoothness=100
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=Yes
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=Yes
RudderSpikeRemoval=Yes
ElevatorSpikeRemoval=Yes
AileronSpikeRemoval=Yes
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=Yes
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=Yes
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=Yes
DelayedMouseLookZoom=No
AxesWrongRange=No
TCASid=Flight
TCASrange=0
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=Yes
OOMcheck=Yes
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
LuaRerunDelay=66
ShortAircraftNameOK=Yes
Console=No
AssignJoystickIDs=Yes
OOMcheckInterval=10
FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0
SimConnectUsed=10.0.61259.0

[JoyNames]
AutoAssignLetters=No

[Axes]
PollInterval=10
RangeRepeatRate=10

[buttons]
PollInterval=25
ButtonRepeat=20,10
12=R2,0,C65588,0
13=P2,1,C65752,0
27=R2,32,C65734,0
28=U2,32,C65734,0
29=U2,34,C65672,0
30=R2,33,C65856,0
31=U2,33,C65856,0
32=R2,34,C65672,0
33=R2,35,C65857,0
34=U2,35,C65857,0
35=R2,36,C65735,0
36=U2,36,C65735,0
37=U2,38,C65671,0
38=R2,37,C65855,0
39=U2,37,C65855,0
40=R2,38,C65671,0
41=R2,39,C65854,0
42=U2,39,C65854,0
43=R2,2,C65607,0
44=R2,3,C65615,0

[MacroFiles]
1=767
2=iFly737
3=MADDOG2

[LuaFiles]
1=DynamicFriction
2=ipcReady
3=linda

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No
Port=COM0
Speed=4800
Interval=2000
PosTo6Decimal=No
SimModeIndicator=No
Sentences=

[GPSout2]
GPSoutEnabled=No
Port=<none set>
Speed=4800
Interval=2000
PosTo6Decimal=No
SimModeIndicator=No
Sentences=

[WideServer]
WideFSenabled=Yes
AdvertiseService=1
Port=8002
Port2=9002

[sounds]
Path=H:\FSX\Sound\
Device1=Primary Sound Driver
Device2=Speakers (Creative SB X-Fi)
Device3=SPDIF Out (Creative SB X-Fi)
Device4=DELL U2414H-0 (NVIDIA High Definition Audio)

[buttons]
ButtonRepeat=20,10
3=R1,8,C66080,0
4=U1,8,C66079,0
15=R0,32,C65734,0
16=U0,32,C66416,-1
17=R0,33,C65856,0
18=U0,33,C66416,-1
19=R0,34,C65672,0
20=U0,34,C66416,-1
21=R0,35,C65857,0
22=U0,35,C66416,-1
23=R0,36,C65735,0
24=U0,36,C66416,-1
25=R0,37,C65855,0
26=U0,37,C66416,-1
27=R0,38,C65671,0
28=U0,38,C66416,-1
29=P0,39,C65854,0
30=U0,39,C66416,-1
39=U1,1,C0,0
PollInterval=25
40=R2,0,C65588,0
42=R2,2,C65607,0
45=R2,32,C65734,0
46=R2,33,C65856,0
47=R2,34,C65672,0
48=R2,35,C65857,0
49=R2,36,C65735,0
50=R2,37,C65855,0
51=R2,38,C65671,0
52=R2,39,C65854,0
57=R2,3,C65615,0
60=R0,7,C66080,0
62=R0,6,C65602,0
63=U0,6,C65602,0
65=U2,2,C65706,0
66=U2,3,C65694,0
70=U0,7,C66079,0
72=P109,0,C66240,0
73=U109,0,C66240,0
74=P109,1,C66060,0
75=U109,1,C66059,0
76=P109,2,C3,0

[MacroFiles]
1=767
2=iFly737
3=MADDOG2

[LuaFiles]
1=ipcReady
2=linda
3=DynamicFriction

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No
Port=COM0
Speed=4800
Interval=2000
PosTo6Decimal=No
SimModeIndicator=No
Sentences=

[GPSout2]
GPSoutEnabled=No
Port=<none set>
Speed=4800
Interval=2000
PosTo6Decimal=No
SimModeIndicator=No
Sentences=

[WideServer]
WideFSenabled=Yes
AdvertiseService=1
Port=8002
Port2=9002

[sounds]
Path=H:\FSX\Sound\
Device1=Primary Sound Driver
Device2=Speakers (Creative SB X-Fi)
Device3=SPDIF Out (Creative SB X-Fi)

[Window.LUA display]
Docked=7352, 2723, 3549, 2475

[VRInsight]
1=COM3

[Programs]
Run1=HIDE,H:\FSX\FSX.bat
RunIf1=H:\FSX\Modules\linda.exe

 

[ClientNames]
1=KENSIKDRAGONFLY

[Keys]
1=32,8,1127,0,1128,0

[Auto]
1=Lua Dynamicfriction

[General]
UpdatedByVersion=4939g
History=KC9M2CGOBO69F302ZOH23
InitDelayDevicesToo=No
NewInterceptTextMenu=No
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=Yes
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
DeleteVehiclesForAES=Yes
AutoScanDevices=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=YES
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
DelayedMouseLookZoom=No
AxesWrongRange=No
TCASid=Flight
TCASrange=0
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=Yes
OOMcheck=Yes
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
LuaRerunDelay=66
Console=No
SpoilerIncrement=512
FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0
SimConnectUsed=10.0.61259.0

[Axes.Default 737]
RangeRepeatRate=10
0=0X,256,D,22,0,0,0
1=0Z,256,D,4,0,0,0
2=0U,256,D,4,0,0,0
3=2X,256,D,1,0,0,0
4=2Y,256,D,2,0,0,0

[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Spoilers=-16380,-512,10493,16380/16
Aileron=-16384,-512,512,16128
Throttle2=-16384,-16384,-16384,16383
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
Throttle=-16384,16209
Elevator=-16287,-512,512,16383

[Profile.Default 737]
1=Default 737
2=Boeing 737-800 Lauda Air

[Axes]
PollInterval=10
RangeRepeatRate=10

[Profile.Virgin 777]
1=PMDG 777-243LR Virgin Atlantic Airways (Fictional)

[Axes.Virgin 777]
RangeRepeatRate=10
0=0X,256,D,22,0,0,0
1=0Z,256,D,9,0,0,0
2=0U,256,D,10,0,0,0
3=2X,256,D,1,0,0,0
4=2Y,256,D,2,0,0,0

[buttons.Default 737]
1=R0,2,C65602,0
2=U0,2,C1065,0
3=P0,1,C65602,0
5=P2,1,C65752,0
11=R2,2,C65607,0
12=R2,3,C65615,0
13=P168,17,C65758,0
14=P168,16,C65759,0
15=R167,1,C66080,0
16=R167,0,C66079,0
17=U0,1,C65697,0
18=U2,3,C65615,0
19=U2,2,C65607,0
22=R2,33,C65856,0
23=U2,33,C66416,0
24=P166,2,C1061,0
28=P166,7,C1062,0
31=P166,4,C66494,0
32=P166,3,C66495,0
33=P166,0,C66531,0
34=P166,1,C66531,0
35=P166,5,C66531,0

[buttons.Virgin 777]
0=R0,2,C65602,0
1=U0,2,C65598,0
2=P109,0,C66240,0
4=P109,1,C66060,0
5=U109,1,C66059,0
6=R2,32,C65734,0
7=R2,33,C65856,0
8=R2,34,C65672,0
9=R2,35,C65857,0
11=R2,36,C65735,0
12=R2,38,C65671,0
24=P167,1,C66080,0
25=U167,1,C66080,0
26=P167,0,C66079,0
28=R2,0,C65588,0
29=R2,39,C65854,0
31=R2,37,C65855,0
33=U2,32,C66416,0
34=U2,36,C66416,0
35=U2,33,C66416,0
36=U2,34,C66416,0
37=U2,35,C66416,-1
38=U2,37,C66416,0
39=U2,38,C66416,0
40=U2,39,C66416,0
41=P2,1,C65752,0
42=U2,1,C65752,0
43=P168,17,C65758,0
45=P168,16,C65759,0

 

[Profile. PMDG 777]
1=PMDG 777-200LR PMDG House

[buttons. PMDG 777]
0=R2,32,C65734,0
1=R2,36,C65735,0
2=R2,38,C65671,0
3=R2,34,C65672,0

[Axes]
PollInterval=10
RangeRepeatRate=10

[Profile.British Airways 777]
1=PMDG 777-236LR British Airways (Fictional)

[Axes.British Airways 777]
RangeReapeatRate=10
RangeRepeatRate=10
0=0X,256,D,22,0,0,0
1=0Z,256,D,9,0,0,0
2=0U,256,D,10,0,0,0
3=2X,256,D,1,0,0,0
4=2Y,256,D,2,0,0,0

[buttons.Default 737]
1=R0,2,C65602,0
2=U0,2,C1065,0
3=P0,1,C65602,0
5=P2,1,C65752,0
6=R2,32,C65734,0
8=R2,36,C65735,0
9=R2,38,C65671,0
10=R2,34,C65672,0
11=R2,2,C65607,0
12=R2,3,C65615,0
13=P168,17,C65758,0
14=P168,16,C65759,0
15=R167,1,C66080,0
16=R167,0,C66079,0
17=U0,1,C65697,0
18=U2,3,C65615,0
19=U2,2,C65607,0
20=U2,34,C65672,0
22=R2,33,C65856,0
23=U2,33,C65856,0
24=R2,35,C65857,0
25=U2,35,C65857,0
27=R2,37,C65855,0
28=U2,37,C65855,0
29=U2,38,C65671,0
30=R2,39,C65854,0
31=U2,39,C65854,0
32=U2,36,C65735,0
33=U2,32,C65734,0

[buttons.British Airways 777]
0=R0,2,C65602,0
1=U0,2,C65598,0
2=P109,0,C66240,0
4=P109,1,C66060,0
5=U109,1,C66059,0
6=R2,32,C65734,0
7=R2,33,C65856,0
8=R2,34,C65672,0
9=R2,35,C65857,0
11=R2,36,C65735,0
12=R2,38,C65671,0
24=P167,1,C66080,0
25=U167,1,C66080,0
26=P167,0,C66079,0
28=R2,0,C65588,0
29=R2,39,C65854,0
31=R2,37,C65855,0
33=U2,32,C66416,0
34=U2,36,C66416,0
35=U2,33,C66416,0
36=U2,34,C66416,0
37=U2,35,C66416,-1
38=U2,37,C66416,0
39=U2,38,C66416,0
40=U2,39,C66416,0
41=P2,1,C65752,0
42=U2,1,C65752,0
43=P168,17,C65758,0
44=P168,16,C65759,0
45=P166,2,C1061,0
47=P166,0,C66531,0
51=P166,5,C66531,0
53=P166,7,C1062,0
62=P109,6,C66705,0

[FSUIPC update 4.4.949]

Hi Pete. Log below

 

********* FSUIPC4, Version 4.949 by Pete Dowson *********

fsx.exe version = 10.0.61637.0

Reading options from "H:\FSX\Modules\FSUIPC4.ini"

Running inside FSX on Windows 7

Module base=56B90000

User Name="David Edmunds"

User Addr="kimdaveedmunds@aol.com"

FSUIPC4 Key is provided

WideFS7 Key is provided

       15 System time = 07/01/2016 16:53:33

       15 FLT UNC path = "\\MISSIONRANCH\Users\Dave\Documents\Flight Simulator X Files\"

       15 ------ Module Version Check ------

       15        acontain.dll: 10.0.61637.0

       15             api.dll: 10.0.61637.0

       15        controls.dll: 10.0.61637.0

       15      fs-traffic.dll: 10.0.61637.0

       15             G3D.dll: 10.0.61637.0

       15            sim1.dll: 10.0.61637.0

       15        visualfx.dll: 10.0.61637.0

       15         weather.dll: 10.0.61637.0

       15          window.dll: 10.0.61637.0

       15 ----------------------------------

       62 Trying to connect to SimConnect Acc/SP2 Oct07 ...

       78 FS UNC path = "\\MISSIONRANCH\FSX\"

      405 ---------------------- Joystick Device Scan -----------------------

      405 -------------------------------------------------------------------

      608 Run: "H:\FSX\FSX.bat"

      608 FSUIPC couldn't run: "H:\FSX\Modules\linda.exe" [Error=2]

      608 LogOptions=00000000 00000001

      608 -------------------------------------------------------------------

      608 ------ Setting the hooks and direct calls into the simulator ------

      608 --- CONTROLS timer memory location obtained ok

      608 --- SIM1 Frictions access gained

      608 ASN active function link set

      608 VRI port 1 "COM3" failed to open

      608 --- FS Controls Table located ok

      608 --- Installed Mouse Macro hooks ok.

      608 Wind smoothing may be by ASN, not FSUIPC, if it is running

      608 Will switch smoothing action when ASN starts/stops

      608 --- G3D.DLL fix attempt installed ok

      608 --- All links checked okay

      608 -------------------------------------------------------------------

      608 SimConnect_Open succeeded: waiting to check version okay

      608 Trying to use SimConnect Acc/SP2 Oct07

      608 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)

      608 Initialising SimConnect data requests now

      608 FSUIPC Menu entry added

      639 \\MISSIONRANCH\Users\dave\documents\flight simulator x files\Default Lauda gate 548.FLT

      639 \\MISSIONRANCH\FSX\SimObjects\Airplanes\B737_800\Boeing737-800.AIR

    20810 System time = 07/01/2016 16:53:53, Simulator time = 16:53:31 (16:53Z)

    21013 Aircraft="Boeing 737-800 Lauda Air"

    21824 Starting everything now ...

    21824 Using "C:\Program Files\GoFlight\GFDEV.DLL", version 2.2.6.0

    21824 GoFlight GFMESM detected: 1 device 

    21824 LUA.0: beginning "H:\FSX\Modules\ipcReady.lua"

    21824 LUA.0: ended "H:\FSX\Modules\ipcReady.lua"

    21840 LUA.1:  

    21840 LUA.1: ************************** START *************************

    21840 LUA.1: [sTART]LINDA:: Loading...

    21855 LUA.1: LINDA:: ---> ERROR:: [sTART] Main system config not found! Run GUI and check configs!

    21980 Advanced Weather Interface Enabled

   106876 Sim stopped: average frame rate for last 87 secs = 30.3 fps

   106876 Average weather filter write interval in that time = 730.1 msecs

 

   109855 Weather Mode now = Theme

   109855 \\MISSIONRANCH\Users\Dave\AppData\Roaming\Microsoft\FSX\Previous flight.FLT

   134691 System time = 07/01/2016 16:55:47, Simulator time = 16:53:30 (16:53Z)

   134691 *** FSUIPC log file being closed

Minimum frame rate was 29.2 fps, Maximum was 30.7 fps

Minimum available memory recorded was 2394Mb

Average frame rate for running time of 87 secs = 30.3 fps

Average weather filter write interval in that time = 730.1 msecs

G3D fix: Passes 12715, Null pointers 0, Bad pointers 0, Separate instances 0

Memory managed: 184 Allocs, 184 Freed

********* FSUIPC Log file closed ***********

[FSUIPC update 4.4.949]

Hi Pete, Thanks for your response, My last update was 4,96 off  the top of my head. I did a straight update to 4.4.949 after saving my ini file .

[FSUIPC update 4.4.949]

Hello Pete Dowson.

 

I have updated my FSUIPC to 4.4.949   Please could you have a look at the attached log to throw any light on the reason it now wont connect to Linda 2.6.7 software, which also I have just updated,  which I use for my VRinsight MCP combo.

Also none of my controls are working, although when I look at the FSUIPC. ini file they are all still there.

 

Many thanks In advance

 

edmundo.

[Pete's Cockpit]

Excellent what a fantastic atchevement, 

[FSUIPC 4.92]

Hi Andydigital,

 

The problem was DLL.XML file permission, so the installer runs but I cant register,  FSUIPC wont recognise my Product Key for registration. The error message says "Sorry, this key is not a valid 12 character" key

 

I have Copied and pasted the key from the Modules folder a couple of times but still no good, any ideas please.

 

Regards  

 

Dave

[FSUIPC 4.92]

Thank you for your reply, I have tried reinstalling FSUIPC this is the installer log I get

 

Checking if there's already a version of FSUIPC4 installed in:
       H:\FSX\Modules\FSUIPC4.DLL
... Version 4.921f found.
FSX Modules folder already exists.
Okay -- installed FSUIPC4 into "H:\FSX\Modules\FSUIPC4.DLL"
Looking for the current user's Application Data path:
... found as "C:\Users\Dave\AppData\Roaming"
Now finding \Microsoft\FSX\FSX.CFG for all users, including this one
Looking in "C:\Users\All Users\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Dave\AppData\Roaming"
Found FSX.CFG in "C:\Users\Dave\AppData\Roaming\Microsoft\FSX\FSX.CFG"
Now checking DLL.XML ...
... Couldn't open or create the DLL.XML file!
Now checking for a SimConnect.XML file ...
... No SimConnect.XML file found. This is okay.
Looking in "C:\Users\Default\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Default User\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\Public\AppData\Roaming"
 ... No FSX.CFG there
Looking in "C:\Users\UpdatusUser\AppData\Roaming"
 ... No FSX.CFG there
Cannot edit the DLL.XML file to activate FSUIPC.

 

Hopefully this will throw some light on my problem

 

Kind Regards

 

Dave
 

[FSUIPC 4.92]

Hi Pete.

 

I have Updated my FSUIPC to 4.92 and something has gone wrong, I am hopiing you will be able to help, below I have listed my install log, my ini file and log.

 

Looking in registry for FSX install path:

     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0

     Parameter"SetupPath"

... >>>  OK! FOUND FSX!  <<< ...

Looking in registry for ESP install path:

     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft ESP\1.0

     Parameter"SetupPath"

Not there, so looking in:

     HKEY_CURRENT_USER\ESP

     Parameter"AppPath"

... NOT found! ...

Looking in registry for Prepar3D install path:

     HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D

     Parameter"SetupPath"

Not there, so looking in:

     HKEY_CURRENT_USER\Prepar3D

     Parameter"AppPath"

... NOT found! ...

Looking in registry for Prepar3D v2 install path:

     HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2

     Parameter"SetupPath"

Not there, so looking in:

     HKEY_CURRENT_USER\Prepar3D v2

     Parameter"AppPath"

... NOT found! ...

===========================================================

 

INSTALLATION FOR FSX:

SetupPath="H:\FSX\"

Checking version of the FSX EXE:

... Version 10.0.61637.0  (Need at least 10.0.60905.0)

Checking compatibility with installed SimConnect:

    Found SimConnect build 60905 (Original)

    Found SimConnect build 61242 (SP1 May07)

    Found SimConnect build 61259 (Acc/SP2 Oct07)

Checking if there's already a version of FSUIPC4 installed in:

       H:\FSX\Modules\FSUIPC4.DLL

... Version 4.900 found.

FSX Modules folder already exists.

Okay -- installed FSUIPC4 into "H:\FSX\Modules\FSUIPC4.DLL"

Looking for the current user's Application Data path: 

... found as "C:\Users\Dave\AppData\Roaming"

Now finding \Microsoft\FSX\FSX.CFG for all users, including this one

Looking in "C:\Users\All Users\AppData\Roaming"

 ... No FSX.CFG there

Looking in "C:\Users\Dave\AppData\Roaming"

Found FSX.CFG in "C:\Users\Dave\AppData\Roaming\Microsoft\FSX\FSX.CFG"

Now checking DLL.XML ...

... There is a previous DLL.XML, checking for FSUIPC4 section.

... FSUIPC4_Loader section already exists but will be replaced.

     (with FSUIPC4_Loader entry)

... FSUIPC4 section of DLL.XML written okay

Now checking for a SimConnect.XML file ...

... No SimConnect.XML file found. This is okay.

Looking in "C:\Users\Default\AppData\Roaming"

 ... No FSX.CFG there

Looking in "C:\Users\Default User\AppData\Roaming"

 ... No FSX.CFG there

Looking in "C:\Users\Public\AppData\Roaming"

 ... No FSX.CFG there

Looking in "C:\Users\UpdatusUser\AppData\Roaming"

 ... No FSX.CFG there

"Modules\FSUIPC Documents" folder already exists.

Now installing additional files into the "Modules\FSUIPC Documents" folder:

   Installed "FSUIPC4 User Guide.pdf" okay

   Installed "FSUIPC4 for Advanced Users.pdf" okay

   Installed "FSUIPC4 History.pdf" okay

   Installed "List of FSX controls.pdf" okay

   Installed "FSUIPC Lua Library.pdf" okay

   Installed "FSUIPC Lua Plug-Ins.pdf" okay

   Installed "Lua License.pdf" okay

   Installed "Lua Plugins for VRInsight Devices.pdf" okay

   Installed "LuaFileSystem.pdf" okay

   Installed "Example LUA plugins.zip" okay

   Installed "Offset Mapping for PMDG 737NGX.pdf" okay

   Installed "FSUIPC4 Offsets Status.pdf" okay

===========================================================

 

All installer tasks completed.

Registration for FSUIPC4 and WideFS was successful! (result code 00)

 

*************** End of Install Log ***************

[General]

UpdatedByVersion=4921f

History=5Q42KMZJR7M4J781UJCXE

InitDelayDevicesToo=No

MouseWheelMove=Yes

MouseWheelTrim=No

MouseWheelTrimSpeed=1

JoystickTimeout=20

PollGFTQ6=Yes

BlankDisplays=No

FixControlAccel=Yes

FixMachSpeedBug=No

DeleteVehiclesForAES=Yes

AutoScanDevices=Yes

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=Yes

SuppressCloudTurbulence=No

MaxIce=1

MinIce=-1

UpperWindGusts=No

SuppressWindTurbulence=Yes

SuppressWindVariance=Yes

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=Yes

WindSmoothing=Yes

WindSmoothness=1

WindSmoothAirborneOnly=Yes

PressureSmoothness=20

TemperatureSmoothness=100

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=Yes

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=Yes

RudderSpikeRemoval=Yes

ElevatorSpikeRemoval=Yes

AileronSpikeRemoval=Yes

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=Yes

TimeForSelect=4

LoadFlightMenu=No

LoadPlanMenu=No

PauseAfterCrash=Yes

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=Substring

UseProfiles=Yes

EnableMouseLook=Yes

AxesWrongRange=No

TCASid=Flight

TCASrange=0

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

DontResetAxes=No

InitDelay=0

GetNearestAirports=Yes

OOMcheck=Yes

WeatherReadFactor=2

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

LuaRerunDelay=66

Console=No

UseMidMouseBtn=Yes

UseSystemTime=No

FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0

SimConnectUsed=10.0.61259.0

 

[JoyNames]

AutoAssignLetters=No

0=Saitek Pro Flight Yoke

0.GUID={08D78000-3D34-11E1-8001-444553540000}

1=Saitek Pro Flight Quadrant

1.GUID={DD0A9050-1A02-11E2-8001-444553540000}

 

[buttons]

ButtonRepeat=20,10

1=P0,1,C65589,0

3=R1,8,C66080,0

4=U1,8,C66079,0

5=R1,6,C65602,0

15=R0,32,C65734,0

16=U0,32,C66416,-1

17=R0,33,C65856,0

18=U0,33,C66416,-1

19=R0,34,C65672,0

20=U0,34,C66416,-1

21=R0,35,C65857,0

22=U0,35,C66416,-1

23=R0,36,C65735,0

24=U0,36,C66416,-1

25=R0,37,C65855,0

26=U0,37,C66416,-1

27=R0,38,C65671,0

28=U0,38,C66416,-1

29=P0,39,C65854,0

30=U0,39,C66416,-1

31=P0,5,C65758,0

32=P0,4,C65759,0

33=R0,0,C65588,0

34=R0,2,C65607,0

35=R0,3,C65615,0

 

[MacroFiles]

1=767

2=iFly737

3=MADDOG2

 

[LuaFiles]

1=ipcReady

2=linda

3=DynamicFriction

 

[AutoSave]

Next=1

Interval=60

Files=10

SaveOnGround=No

AutoSaveEnabled=No

 

[GPSout]

GPSoutEnabled=No

Port=COM0

Speed=4800

Interval=2000

PosTo6Decimal=No

SimModeIndicator=No

Sentences=

 

[GPSout2]

GPSoutEnabled=No

Port=COM0

Speed=4800

Interval=2000

PosTo6Decimal=No

SimModeIndicator=No

Sentences=

 

[WideServer]

WideFSenabled=Yes

AdvertiseService=1

Port=8002

Port2=9002

 

[sounds]

Path=H:\FSX\Sound\

Device1=Primary Sound Driver

Device2=Speakers (Creative SB X-Fi)

Device3=SPDIF Out (Creative SB X-Fi)

 

[Window.LUA display]

Docked=7352, 2723, 3549, 2475

 

[VRInsight]

1=com3

 

[Programs]

Run1=HIDE,H:\FSX\FSX.bat

 

 

[Axes]

0=0X,256,F,65763,0,0,0

1=0Y,256,F,65762,0,0,0

2=0Y,B,0,0,65683,0,65684,0

3=0V,256,F,65762,0,0,0

4=1X,256,F,65697,0,0,0

RangeRepeatRate=10

 

[JoystickCalibration]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

MapThrottle=Yes

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Throttle1=-16380,-512,512,16380

Aileron=-16191,-512,64,16096/8

Elevator=-16380,32,32,16380

 

[ClientNames]

1=KENSIKDRAGONFLY

 

[Keys]

1=32,8,1127,0,1128,0

 

[Auto]

1=Lua Dynamicfriction

********* FSUIPC4, Version 4.921f by Pete Dowson *********

Running inside FSX on Windows 7

Module base=61170000

User Name="David Edmunds"

User Addr="kimdaveedmunds@aol.com"

FSUIPC4 Key is provided

WideFS7 Key is provided

       16 System time = 15/11/2013 22:44:51

       16 FLT UNC path = "\\MISSIONRANCH\Users\Dave\Documents\Flight Simulator X Files\"

       47 Trying to connect to SimConnect Acc/SP2 Oct07 ...

       63 FS UNC path = "\\MISSIONRANCH\FSX\"

      593 Run: "H:\FSX\FSX.bat"

      593 LogOptions=00000000 00000001

      593 SIM1 Frictions access gained

      593 Wind smoothing fix is fully installed

      593 G3D.DLL fix attempt installed ok

      593 SimConnect_Open succeeded: waiting to check version okay

      593 Trying to use SimConnect Acc/SP2 Oct07

      593 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)

      593 Initialising SimConnect data requests now

      593 FSUIPC Menu entry added

      609 \\MISSIONRANCH\Users\dave\documents\flight simulator x files\Default Lauda gate 548.FLT

      609 \\MISSIONRANCH\FSX\SimObjects\Airplanes\B737_800\Boeing737-800.AIR

      656 VRI port 1 "com3" opened

     2356 VRI MCP2B ("MCP2 Boeing") detected on port com3

    19844 System time = 15/11/2013 22:45:10, Simulator time = 22:44:50 (22:44Z)

    20047 Aircraft="Boeing 737-800 Lauda Air"

    20858 Starting everything now ...

    20858 LUA.0: beginning "H:\FSX\Modules\ipcReady.lua"

    20858 LUA.0: ended "H:\FSX\Modules\ipcReady.lua"

    20873 LUA.1: 

 

 

    20873 LUA.1: [iNIT]LINDA:: Loading...

    20951 LUA.1: LINDA:: Aircraft: Boeing 737-800 Lauda Air

    20967 LUA.1: LINDA:: Aircraft module detected: FSX Default

    20998 LUA.2: LINDA:: AivlaSoft library loaded...

    21014 LUA.2: LINDA:: FSX standard library loaded...

    21014 LUA.2: LINDA:: IAO library loaded...

    21014 LUA.2: LINDA:: RealityXP library loaded...

    21029 LUA.2: LINDA:: A2A MAP library loaded...

    21029 Advanced Weather Interface Enabled

    26536 LUA.2: LINDA:: Loading a fallback joysticks config...

    26536 LUA.2: LINDA:: Loading FSX Default joysticks config...

    26536 LUA.2: LINDA:: Module: FSX Default Started...

    26552 LUA.2: LINDA:: Ready to go, Captain!

    26552 LUA.2: LINDA:: 

  1009686 Sim stopped: average frame rate for last 953 secs = 30.3 fps

  1009686 Average weather filter write interval in that time = 2006.9 msecs

 

  1012931 Weather Mode now = Theme

  1012931 \\MISSIONRANCH\Users\Dave\AppData\Roaming\Microsoft\FSX\Previous flight.FLT

  1012946 LUA.1: LINDA:: Aircraft: Boeing 737-800 Lauda Air

  1012946 LUA.1: LINDA:: Aircraft module detected: FSX Default

  1012977 LUA.2: LINDA:: AivlaSoft library loaded...

  1012977 LUA.2: LINDA:: FSX standard library loaded...

  1012993 LUA.2: LINDA:: IAO library loaded...

  1012993 LUA.2: LINDA:: RealityXP library loaded...

  1012993 LUA.2: LINDA:: A2A MAP library loaded...

  1018500 LUA.2: LINDA:: Loading a fallback joysticks config...

  1018500 LUA.2: LINDA:: Loading FSX Default joysticks config...

  1018515 LUA.2: LINDA:: Module: FSX Default Started...

  1018515 LUA.2: LINDA:: Ready to go, Captain!

  1018515 LUA.2: LINDA:: 

  1034896 System time = 15/11/2013 23:02:06, Simulator time = 22:44:49 (22:44Z)

  1034896 *** FSUIPC log file being closed

Average frame rate for running time of 963 secs = 30.3 fps

Average weather filter write interval in that time = 2027.5 msecs

G3D fix: Passes 11571, Null pointers 0, Bad pointers 0, Separate instances 0

Memory managed: 750 Allocs, 750 Freed

********* FSUIPC Log file closed ***********

Hope fully you will be able to see if there is a problem with installation

 

Kind Regards 

 

Dave

 

[Enable Aero using FSUIPC]

Thank you -Pv-, I understand exactly what you are saying, Many Thanks, Dave

[Enable Aero using FSUIPC]

Hi Pete, thank you for your reply," Yes I am English". However when I save the bat file to fsx it ends up in fsx above the fsx.exe file, when I tried to save it to fsx.exe I get a message asking me if I want to replace the fsx.exe, should I say yes to this, I am a little scared as this must be fsx application file and I dont want to mess everything up I have put Run1=HIDE,H:\FSX\FSX.bat into the FSUIPC ini file, H being the drive where FSX is on my PC. Again many thanks Pete, Dave.

[Enable Aero using FSUIPC]

Hi Pete, How do I, "Set the FSUIPC to run the batch file automatically, edit the FSUIPC.ini and enter:". And do I insert the following into FSX.exe using notepad using notepad? Run1=HIDE,"E:\FSX\FSX.bat" (insert the link to your FSX.exe) I must appolagise for my lack of PC knowlage I am self taught, and lots still to learn, Many Thanks Dave

[Enable Aero using FSUIPC]

Ok thanks Pete,

Posted 31 May 2012 - 05:28 PM

First of all, my thanks go to Günter (guenseli) and Ryan (Tabs) for this.

Aero must be ENABLED before starting FSX for this tweak to work!

It is about vsync fix for users who fly windowed.

Now, in another thread, a tweak with half the refresh rate was posted for the users of full screen.

The good news is, there is something new for windowed users too:

While you won't be able to enjoy the smoothness of the half refresh rate FPS (60->30), you will be able to circumvent that stupid vsync behaviour in windowed mode where FSX is halving the FPS all the time. You can usually either get 60, then 30, then 20 then 15 I believe... if FPS drops below 30, it will drop to either 20 or 15.

FSX disables Aero upon start (does anyone know why), thus making vsync function like described above (at refresh dividers).

Now, if you restart the Desktop Windows Manager (dwm.exe, which then restarts the Aero after FSX has started), it will behave just like the standard full screen vsync. 30-29-28-27...

First of all, to enable vsync in windowed, put this into FSX.cfg:

[GRAPHICS]

ForceWindowedVsync=1

Now,

there are three ways to restart the DWM (Aero):

DO NOT use this option, as it apparently messes up the EZCA functionality. 2) and 3) is working fine.

2) create a batch file containing:

@echo off

start "" "E:\FSX\FSX.exe" (insert the link to your FSX.exe)

net stop uxsms

net start uxsms

and run it. FSX is going to start, Aero is going to get started after FSX, and voila...

3) elegant solution, through FSUIPC (only works with registered version):

- create a batch file containing:

net stop uxsms

net start uxsms

Set the FSUIPC to run the batch file automatically, edit the FSUIPC.ini and enter:

[Programs]

Run1=HIDE,"E:\FSX\FSX.bat" (insert the link to your FSX.exe)

This solution is going to do everything silently. No CMD popup windows, only visible Aero activation.

Important:

If you come over ANY sign of trouble, please post. I didn't have much time to test this out, but a little tests I did, looked quite promising.

Hopefully you can see this Pete, Thanks Dave

[Enable Aero using FSUIPC]

Hi Pete, I have attached below an article about FSX and Aero, Please can you advise me how to use FSUIPC as described in the article I have attached, using more of an explanation how to do this using FSUIPC, Do I just edit FSUIPC.ini, with the two lines as explained on the attachment for the "elegant solution using a registered version" and If I need to put anything in the FSX.exe,and how do I go about it. I have the latest version of FSUIPC 4,86. Many Thanks in advance. Dave