holi
-
Posts
64 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by holi
-
-
Yes Prosim is running on the Sim Computer, plus MCP.
All other on clients.
I can check the log file tomorrow, if you wish I can upload it for you....
-
But Pete,
why is it running fine in my setup?
i have the Simmconnect FSX SP2 installed and it works!
it is very strange indeed, I mean, I'm quite happy that Prosim is functioning well in my Setup , but it seems to be that I'm the only one......
-
Hi Pete,
as mentioned yesterday in the Prosim Forum I had only problems with the Autoflight.
Today I tested as recommended by you again with V 5.1.0.107 Productversion 5.101g and it was a full success!
I did a short flight and all my harware including CPFlight MCP worked flawless! I did a full Autoland and it worked well.
I did the IPC log, but I think it became to large to upload or send it to you. Even zipped it is about 25MB
Anyway I´m quite happy as I can start using P3Dv4 with my home cockpit.!
Thank you very much indeed!
Just in case you need it my system is WIN7 64bit prof on all my machines in the network. Prosim is working without any laggs or stuttering.
Maybe people who are running their setups on W10 machines have the problems with Prosim not working properly...I can luckely say I have no problems at all!
Regards
Holi
-
Yes, your support is incredible!!!
,What would we do without you Pete!!
-
Pete, the problem is gone with the controls!
The link you provided above 101A did the job and all controls are recognized....Thank You!
For your record pls find the cvs and log file
-
Good Morning Pete,
I just jump in as I have a similar problem regognizing of controls with FSUIPC5.
There are in my example both rudders not recognized by FSUIPC5, but the are recognized by the Sim under controls.
Luckely I still have V3 installed and with the latest FSUIPC4 installed there is NO problem and ALL controls are recognized by FSUIPC4. Unfortunately I forgot to save the log and cvs of FSUIPC4 if it is essential I need to switch the computer on again....
Any help would be appreciated!
-
Thanks Pete!
unfortunately still no Fsuipc at Simmarket......have to wait then and will be one of the first who are going to buy it:-))))
-
Thanks for advice, will do it over the weekend....
Just another question, will there be the menu to assign the axis and calibrate then in the registered version?
The reason why I'm asking, I have disabled the controls in the sim and used in v3 FSUIPC only.
With the same ini file I have no input to the controls if disabled in the sim, so they are not recognized by FSUIPC in v4....
-
Pete,
the offsets are needed for my throttle running with SIOC.
Before I tested the setup in P3Dv3 and with the latest Fsuipc 4 and the throttle ran fin, but with the same ini file I tried in P3Dv4 and your Fsuipc 5 but the throttle did not work.......contacting the manufacturer and he said the offsets are missing.....
The thing with the buttons may be be fixed once the Fsuipc is registered.
-
Pete,
as I know you have Cockpit as well may I ask the question if in the registered version the offsets are available again?
I tried today with the unregistered version and copied my ini file over from v3 to v4 renamed it and noticed that alot of functions such as buttons or switches etc are not working in V4.
Prosim is connecting but many functions are not available yet. I know that Lapi said its not ready yet but I gave it a try and a few things worked.
looking forward to get it in my basket at Simmarket!
-
Oh yes!!!!!!
+2
-
Hopefully Pete comes back in a healthy shape and relaxed!
I think without having Fsuipc 5 I could bin most of the hardware in my Homecockpit.
There are so many hardware items in it which would not function anymore!
so Pete, please give it a go and get us the 64 bit Application.......even with new registration no problem!
-
Thanks Pete for taking care!
and no, just the 0 is not working using v3.4
-
Pete,
may I jump in as I do not want to open a new topic for my question but it is related to keystrokes.
is there a possibility to create a Keystroke for a 10 ?
I got a pushbutton panel in my HC to be used for keystrokes in GSX or Sode, this is no problem for numbers from 0-9 but I need a 10 and was not able to create such a Keystroke....
any advise from your side?
thank you in advance!
-
Für diese großen Lichter an den Flugzeugen ist die Datei "halo.bmp" im Texturordner verantwortlich, versuche diese von der alten Installation wieder zu überschreiben.
Dieses Problem mit den "Riesenblasen" ist auch bei Matrox Grakas bekannt und deshalb habe ich mir diese Datei selbst angepasst und kann sie immer entsprechend wieder austauschen, sollte sie bei irgendeinem "Update" überschrieben worden sein.
Gruß!
-
Andras,
I just bought Budapest 2007 and have flown to LHBP several times and sometimes there are no complete docking bridges (only the last portion is visible) there if you are in the outside view.
I use your scenery together with AES is there some ploblems known?
Thanks
Regards
Holi
-
Andras,
you got me wrong!!
For me there is and was no doubt that your scenery will be payware because it was and surely will be outstanding!
My question was only if existing customer will get a discount for the new.
If not, no problem I will buy it anyway :-))
Regards
Holi
-
Hi Andras,
the forthcoming new scenery, will it be for existing customer an upgrade or do we need to buy it completely new?
By the way I would not mind to pay for your good work!
Regards
-
Chris I sent you an PM in the Forum and as copy I tried again your e-mail out of your Homepage1
Rgds
Holi
-
Chris,
I sent you an e-mail via your webpage concerning Halo.bmp specially about problems with Matrox Parhelia!
Have you got it?
Thanks
Holi
-
Hi Pete,
maybe I´m just lucky, but the wind smoothing options works with me.
I have often heard from fellow simmers that the had this sudden changes and I told them to get this option set within your FSUIPC, which with many of them did not work .
But I have the option checked and even if the wind changes the direction, because it was updated from a new station, the change itself within the simulator are smooth.
I don´t know why, but it works .
So, it should help you to have another look why its working for a few of us.
Regards
-
Dear Pete!!
I hope you remember a few days ago we had an exchange of e-mails related to my problem, that my sim was locking when I used WideFs.
Thanks to your advises and not others having the same problem, I did a few more things to my network and did more testing yesterday.
I changed the NIC in the main computer and as I got the problem again, but only 1 time after about 1.5hours, I suspected that maybe something else could be wrong.
I exchanged the Network cables (used the ones from the other computers, which did not run during my tests) and after that I have not have any problems.
I did that first offline since I was trying to eliminate all interference.
Then , after having no problems, I went online and did two pretty long flights, 2 and 1,5 hours, without having a problem.
I assume my problem is solved, only because of your help, pointing to the right direction with problems in the network.
Since I now can enjoy flying with the new sim I would like to know when you are coming up with the new Version of the FSUIPC solving the problem with the visibility going to unlimited.
Thanks again Peter and take care! Enjoy Stoke on Trent, if I will be in RR at Derby I try to make it happen to visit your city and if you are free,
I invite you in a pub for a beer!!
RGDS
HOLI:D
-
Sorry Peter, I did not want to blame you!!!
All I was saying is that there is maybe a connection between online weather and the tranfer via FSUIPC to the sim what could create this problem, when I was offline I still used the weather from Active Sky in "offline mode".
Even me has not heard from anybody else having my problem.
I will follow your advice and get the Sim to another computer and run everything from there.
Thank you anyway and again - no blame on you, since I know you since long and you are always very helpfull!
Thnks!
Regards
Holi
-
Peter,
I recently bought the my copy of the FS2004 and I got the same problems again with new sim as before in FS2002 (described in the NG above)
The reason why I suspect one of your modules now is, that I tried the 2004 for quite some time without any addon and modules and it was working fine.
Then I installed the modules, wideFS and the FSUIPC and the problem started again. As long as I use it without beeing online it is also ok, but the moment I connect tho the net and using ie Active Sky or wants to connect to fly online via SB the problem starts. Sometimes it happens after a few minutes, sometimes it happens after a hour or so. The signs are always the same: Suddenly the scenery is reloading and I´m static in the air with the engine running and the time settings to a undefined date.
Loading a flight from the autosave tool doesnt help the Aircraft is static without moving at all , no response to the controls etc.
The only thing I can do is restarting the sim.
What I observed is, that this nearly always happens, if the online weather is downloaded either by Activer sky or SB, whatever I use, the other thing is that for a very short time (4 to 10 sec)the indication in the menu bar is showing 2 clients connected instead of normally 1.
You have any idea?
This is very disturbing and anoying, since I have always disconnect from the online flight and these ting happens more and more. Sometimes I have to restart the sim 3-4 times in an hour and that is not very pleasant.
Flying without net it only very rare that this happens.
RGDS
HOLI
FSUIPC5 and Prosim 1.49 test
in FSUIPC Support Pete Dowson Modules
Posted
Pete,
see attached my simconnects installed to my computer and the simconnect.xml
Maybe you give it a try .....
SimConnect.xml