Scott Gustafson

I was getting a crash after installing Windows 11 as well. In my case is was the device driver Sonic Studio Virtual Mixer. No issues with FSUIPC7. Once I removed that device driver no more MSFS 2020 crashes. I figured someone might end up here thinking the issue is FSUIPC and this post may help them.

I had the same issue as the OP. FSUIPC5101a_TEST.zip fix the issue. Thanks!

Fixed in 4.973a, Thanks!!

That's awesome! I use fsuipc so much and you do such great work. Is buying it again the best way to send you something or is there a seperate donate more button somewhere?

I'm all set. I just deleted the entry for the plane with the missing I I file.

General Axis assignments not carrying over when creating a new profile. 1) Load and airplane with no FSUIPC profile 2) Test the Aileron and Elevator axis to make sure it works 3) Open FSUIPC from the Add-ons menu 4) Select the Axis Assignment Tab 5) Select the Profile Specific checkbox 6) Select Yes to the "Do you want to apply.." 7) Select New from the Pop Up menu :cool: Type in a name and hit OK 9) Press the Rescan button and move the Aileron yoke axis and note a blank entry under the "Type of action required" on the Axis Assignment Tab. 10) Press OK to close FSUIPC 11) Note lack of general axis assignments in airplane (Aileron and Elevators not working) The general button assignments do work, just not the general axis assignment. I use: ShortAircraftNameOk=Substring UseProfiles=Files [General] PatchSIM1friction=Yes UpdatedByVersion=4937 History=FZ7YS26MNE8YZSBNY3WHN InitDelayDevicesToo=No NewInterceptTextMenu=No UseSystemTime=No UseMidMouseBtn=Yes MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=Yes ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=0 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Files EnableMouseLook=No DelayedMouseLookZoom=No AxesWrongRange=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=No OOMcheck=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 InitialStallTime=10 NormalStallTime=1 LuaRerunDelay=66 Console=No FSVersionUsed="Lockheed Martin® Prepar3D® v2",2.4.11570.0 SimConnectUsed=2.4.0.0 [JoyNames] AutoAssignLetters=Yes A=Saitek Pro Flight Throttle Quadrant A.GUID={CA141D80-F92C-11E3-8002-444553540000} B=Saitek Pro Flight Cessna Trim Wheel B.GUID={CA22EA90-F92C-11E3-8005-444553540000} C=Saitek Pro Flight Throttle Quadrant C.GUID={CA292C20-F92C-11E3-8007-444553540000} D=DTA Rotary Encoder D.GUID={CA3D2950-F92C-11E3-800A-444553540000} E=Avionics Panel Model 1010F E.GUID={CA3D2950-F92C-11E3-800C-444553540000} F=DTA Rotary Encoder F.GUID={CA46C640-F92C-11E3-800D-444553540000} G=Saitek Pro Flight Combat Rudder Pedals G.GUID={CA46C640-F92C-11E3-800E-444553540000} H=CH FLIGHT SIM YOKE USB H.GUID={CA46C640-F92C-11E3-800F-444553540000} J=Saitek Pro Flight Cessna Trim Wheel J.GUID={CA46C640-F92C-11E3-8010-444553540000} K=GPS K.GUID={CA578F20-F92C-11E3-8012-444553540000} 0=Saitek Pro Flight Throttle Quadrant 0.GUID={CA141D80-F92C-11E3-8002-444553540000} 1=Saitek Pro Flight Cessna Trim Wheel 1.GUID={CA22EA90-F92C-11E3-8005-444553540000} 2=Saitek Pro Flight Throttle Quadrant 2.GUID={CA292C20-F92C-11E3-8007-444553540000} 3=DTA Rotary Encoder 3.GUID={CA3D2950-F92C-11E3-800A-444553540000} 4=Avionics Panel Model 1010F 4.GUID={CA3D2950-F92C-11E3-800C-444553540000} 5=DTA Rotary Encoder 5.GUID={CA46C640-F92C-11E3-800D-444553540000} 6=Saitek Pro Flight Combat Rudder Pedals 6.GUID={CA46C640-F92C-11E3-800E-444553540000} 7=CH FLIGHT SIM YOKE USB 7.GUID={CA46C640-F92C-11E3-800F-444553540000} 9=GPS 9.GUID={CA578F20-F92C-11E3-8012-444553540000} 8=Saitek Pro Flight Cessna Trim Wheel 8.GUID={CA46C640-F92C-11E3-8010-444553540000} [Programs] Run1=READY,"C:\OpusFSI\FSISERVER.EXE" [buttons] ButtonRepeat=20,10 1=PH,4,C66079,0 2=PH,5,C66080,0 3=PH,6,C65759,0 4=PH,7,C65758,0 5=PH,8,K120,8 6=PK,2,C66617,0 7=PK,19,C66627,0 8=PK,18,C66628,0 9=PK,17,C66625,0 10=PK,16,C66626,0 11=PK,5,C66623,0 12=PK,4,C66619,0 14=PK,0,C66616,0 15=PK,1,C66615,0 16=PK,13,C66624,0 17=PE,15,C65927,0 18=PE,18,C65928,0 19=PE,2,C65929,0 20=PE,19,C65930,0 21=PE,16,C65931,0 22=PK,9,C66606,0 23=PK,12,C66612,0 24=PK,7,C66375,0 25=PE,1,C66339,0 PollInterval=25 26=PK,10,C66609,0 27=PA,0,C66330,0 28=PA,1,C66329,0 29=PA,2,C66332,0 30=PA,3,C66331,0 31=PF,10,C66127,0 32=PF,11,C66126,0 33=PF,6,C66129,0 34=PF,7,C66128,0 35=PF,9,C66340,0 36=PF,2,C66341,0 37=PD,1,C65750,0 38=PD,0,K76,9 39=PA,4,C66334,0 40=PA,5,C66333,0 41=PC,0,C66336,0 42=PC,1,C66335,0 43=PH,0,K65,9 [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No Port=COM0 Speed=4800 Interval=2000 PosTo6Decimal=No SimModeIndicator=No Sentences= [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=2000 PosTo6Decimal=No SimModeIndicator=No Sentences= [WideServer] WideFSenabled=Yes [sounds] Path=C:\Prepar3D24\Sound\ Device1=Primary Sound Driver Device2=Speakers (3- High Definition Audio Device) [Axes] RangeRepeatRate=10 PollInterval=10 1=AY,256,D,5,0,0,0 2=AZ,256,D,6,0,0,0 3=BX,256,D,28,0,0,0 4=GX,256,D,7,0,0,0 5=GY,256,D,8,0,0,0 6=GR,256,D,3,0,0,0 7=HX,256,D,1,0,0,0 8=HY,256,D,2,0,0,0 9=HZ,256 10=HZ,U,-5031,16383,65588,0 11=HZ,D,-16384,-2967,65752,32767 12=HZ,U,-5031,16383,65588,0 13=HZ,D,-16384,-2967,65752,32767 14=JX,256,D,21,0,0,0 [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 Aileron=-16380,-700,489,16380 Elevator=-16380,-512,512,16380/8 CowlFlaps1=0,16380/16 CowlFlaps2=0,16380/16 CowlFlaps3=0,16380/16 CowlFlaps4=0,16380/16 [Profile.A2A PA 28] 1=Piper Pa-28-180 Cherokee [Profile.Twin Otter] 1=Aerosoft DHC-6 [Profile.Metro II] 1=Fairchild SA 22 [Profile.SkyMaster] 1=C337 [Profile.Baron58] 1=Beech Baron 58 [Profile.B377] 1=Boeing Stratocruiser [Profile.A2A Cub] 1=A2A Piper Cub [Profile.Connie] 1=Lockheed C69B

I found out the problem. If you have an entry in the FSUIPC4.ini file such as [Profile.A2A PA 28] 1=Piper Pa-28-180 Cherokee Then at a later time lose/delete the corresponding ini file in the profiles folder, a new file is NOT created and the information is stored in the FSUIPC.ini file. I think I lost the corresponding ini file during a re-install of P3D. I do have another issue and I will make a new topic for it. Thanks for the speedy response, Scott

Starting with version 4937 the "UseProfiles=Files" no longer creates a new file in the Modules\Profiles folder. It seems the UseProfiles=Files is ignored for file creation and axis and button information is once again stored in the FSUIPC4.ini file. Aircraft that have ini file in the Profiles folder still use the file. I can manually create an aircraft ini file for FSUIPC to use. I will use this work around for now. I just figured it might be something to look at. Thanks, Scott