Jump to content
The simFlight Network Forums

GEEZO

Members
  • Posts

    74
  • Joined

  • Last visited

Everything posted by GEEZO

  1. All is fixed now. The install log tells me the dll was installled. My cure for it was to access the other computer and copy the dll over to the the one I am using now. That did the trick. The latest number is installed and works ok. As for the keyboard commands, I had to find a copy of one of the config files that had in it what I needed. I do not know what happened initially but all works as it should now. I must have done something I shouldn't have but I can't figure out what it what it was. Anyway, I put the whole thing to bed for the time being and hope it stays that way. It works and I am not going to try to fix it (again). Thanks, Paul....
  2. I now realize that the fs assignments are not touched by fsiupc. I installed it on my old computer and the keyboard there works fine. I have other problems on the new computer. I removed fsuipc.dll and attempted to re-install my copy of fsuipc.( the latest one) The install log tells me that fsuipc.dll was placed in the modules folder. It is not there. I tried a couple of times with the same result. Both "run as administrator" and straight foreward. The registration entries work ok but no fsuipc.dll in the modules folder. I hope I have not done something stupid that I can't recover from. I also ran a registry cleaner but that didn't work either. The last time I looked at the fs9.cfg file all my keyboard entries were still there. I will look again.
  3. I just added the registered version of fsuipc in FS9. The default FS9 keyboard commands are wiped out. Is there a way to re-populate the program with the default commands without entering them one by one? it seems to me there should be a file somewhere that I could just drop into the ini file and have done with it? I looked around for something like but could not find anything. I would like to have the default commands for starters and then change them later if I should so desire. :cry:
  4. Before Sp1 I was running autothumbail. I installed SP1 and autothumbnail quit talking to whomever. Then I tried FSUIPC. No talkie. My firewall always askes if I should allow the connection to the internet. My third grade logic tells me there is a bug in SP1 that wasn't picked up by the beta testers. Again. BEFORE SP1 simconnect was working. AFTER SP1 simconnect quit working for these programs. Conclusion----BUG in SP1. Paul
  5. Answer to query 1. No, but I was running autothumbnail. As of this time that will not work either. Answer to query 2. I am using AOL virus protection And firewall. I disabled all my on line protection and it still does not work. I am using a wirelesss router. Are there port(s) that should be open? I removed SP1 and ran the repair utility. Still does not work. Autothumbnail does not work either. More Logs.....(without sp1 installed) 0.00000 SimConnect version 0x00000002 6.14041 Panels data export found and set to 20A41990 7.46767 DLL Loaded: Path="Modules\FSUIPC4.dll" Version="4.1.0.0" 24.14317 [63] Inactive! ********* FSUIPC4, Version 4.10 by Pete Dowson ********* User Name="" User Addr="" FSUIPC4 not user registered WIDEFS7 not user registered, or expired Running inside FSX (SimConnect Original) Module base=61000000 DebugStatus=0 156 System time = 10:53:36 156 FLT UNC path = "C:\Documents and Settings\PaulE\My Documents\Flight Simulator X Files\" 156 FS UNC path = "C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\" 1375 N.B. Axis Intercepts are disabled! 1375 LogOptions=00000001 1375 SimConnect_Open succeeded: waiting to check version okay 18656 Failed on SimConnect_CallDispatch for Message, return = 0xC000013E 79360 **** No SimConnect events or states being received! Re-connecting now**** 79469 Could not link to all needed SimConnect facilities 100860 System time = 10:55:17 100860 *** FSUIPC log file being closed Memory managed: 2 Allocs, 2 Freed ********* FSUIPC Log file closed *********** Installer for FSUIPC4.DLL version 4.10 Looking in registry for FSX install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"SetupPath" SetupPath="C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\" Checking version of FSX.EXE: ... Version 10.0.60905.0 (Need at least 10.0.60905.0) Checking compatibility with installed SimConnect: ... Okay, Probe Manifest matches installed SimConnect Original Checking if there's already a version of FSUIPC4 installed in: C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL ... No previous valid version found. FSX Modules folder already exists. Okay -- installed FSUIPC4 into "C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL" Looking for the current user's Application Data path: ... found as "C:\Documents and Settings\PaulE\Application Data" Now finding \Microsoft\FSX\FSX.CFG for all users, including this one Looking in "C:\Documents and Settings\All Users\Application Data" No FSX.CFG there Looking in "C:\Documents and Settings\Default User\Application Data" No FSX.CFG there Looking in "C:\Documents and Settings\LocalService\Application Data" No FSX.CFG there Looking in "C:\Documents and Settings\NetworkService\Application Data" No FSX.CFG there Looking in "C:\Documents and Settings\PaulE\Application Data" Found FSX.CFG in "C:\Documents and Settings\PaulE\Application Data\Microsoft\FSX\FSX.CFG"! Now checking DLL.XML ... ... There is a previous DLL.XML, checking for FSUIPC4 section. ... FSUIPC4 section already exists but will be replaced. ... FSUIPC4 section of DLL.XML written okay Now checking for a SimConnect.XML file ... ... No SimConnect.XML file found. This is okay. Now installing additional files into the Modules folder: Installed "FSUIPC4 User Guide.pdf" okay Installed "FSUIPC4 for Advanced Users.pdf" okay Installed "FSUIPC4 History.pdf" okay Installed "List of FSX controls.pdf" okay All installer tasks completed okay! As you will notice, I just installed V4.0 to see if it would work. I hope this is of some help. Paul
  6. The installation does not generate an addon tab in the menu bar. I have tried everything as listed in the stickies. The DLL is in the modules folder. 0.00000 SimConnect version 10.0.61242.0 7.99655 Panels data export found and set to 20A819B8 9.51967 DLL Loaded: Path="Modules\FSUIPC4.dll" Version="4.1.0.3" 32.91955 [63] Inactive! (7, C000013F) 99.22276 [63] Inactive! (7, C000013F) Installer for FSUIPC4.DLL version 4.103 Looking in registry for FSX install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"SetupPath" SetupPath="C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\" Checking version of FSX.EXE: ... Version 10.0.61355.0 (Need at least 10.0.60905.0) Checking compatibility with installed SimConnect: ... Okay, Probe Manifest matches installed SimConnect 60905 (Original) Found later build SimConnect 61242 (SP1 May07) Checking if there's already a version of FSUIPC4 installed in: C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL ... Version 4.100 found. FSX Modules folder already exists. Okay -- installed FSUIPC4 into "C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.DLL" Looking for the current user's Application Data path: ... found as "C:\Documents and Settings\PaulE\Application Data" Now finding \Microsoft\FSX\FSX.CFG for all users, including this one Looking in "C:\Documents and Settings\All Users\Application Data" No FSX.CFG there Looking in "C:\Documents and Settings\Default User\Application Data" No FSX.CFG there Looking in "C:\Documents and Settings\LocalService\Application Data" No FSX.CFG there Looking in "C:\Documents and Settings\NetworkService\Application Data" No FSX.CFG there Looking in "C:\Documents and Settings\PaulE\Application Data" Found FSX.CFG in "C:\Documents and Settings\PaulE\Application Data\Microsoft\FSX\FSX.CFG"! Now checking DLL.XML ... ... There is a previous DLL.XML, checking for FSUIPC4 section. ... FSUIPC4 section already exists but will be replaced. ... FSUIPC4 section of DLL.XML written okay Now checking for a SimConnect.XML file ... ... No SimConnect.XML file found. This is okay. Now installing additional files into the Modules folder: Installed "FSUIPC4 User Guide.pdf" okay Installed "FSUIPC4 for Advanced Users.pdf" okay Installed "FSUIPC4 History.pdf" okay Installed "List of FSX controls.pdf" okay All installer tasks completed okay! ********* FSUIPC4, Version 4.103 by Pete Dowson ********* User Name="" User Addr="" FSUIPC4 not user registered WIDEFS7 not user registered, or expired Running inside FSX (SimConnect SP1 May07) Module base=61000000 DebugStatus=0 438 System time = 09:47:50 438 FLT UNC path = "C:\Documents and Settings\PaulE\My Documents\Flight Simulator X Files\" 438 FS UNC path = "C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\" 1672 N.B. Axis Intercepts are disabled! 1672 LogOptions=00000001 1672 SimConnect_Open succeeded: waiting to check version okay 26000 Failed on SimConnect_CallDispatch for Message, return = 0xC000013E 86047 **** No SimConnect events or states being received! Re-connecting now**** 86282 Now running with SimConnect Original 86282 SimConnect_Open succeeded: waiting to check version okay 91469 Failed on SimConnect_CallDispatch for Message, return = 0xC000020D 124016 System time = 09:49:54 124016 *** FSUIPC log file being closed Memory managed: 2 Allocs, 2 Freed ********* FSUIPC Log file closed *********** three log files above.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.