John Fee
-
Posts
117 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by John Fee
-
-
Notes:
This is an update for FS9/FS2004 users who wish to use SkyDemon in Windows 10 x64.
Previously I used a similar method for FS9 in Windows 7 posted here. SkyDemon has also been updated since that time.
I run FS9 in Compatibility Mode: Windows XP (Service Pack 2).
This method uses Eltima software for pairing COM ports (see below). This allows SkyDemon to interact in both directions with FS9 via GPSout.
1. Install a free registered version of FSUIPC for FS9, version 3.999z9b https://forum.simflight.com/topic/80977-updated-modules/
Details of how to register are provided.
2. Check the FSUIPC.ini in the FS9 Modules folder using Notepad - that the above version is installed.
3. Install GPSout from https://www.schiratti.com/files/dowson.html
This is NOT included in the FSUIPC 3.999z9b download.
GPSout.dll and GPSout.ini must be in the FS9 Modules folder.
4. Open the GPSout.ini file with a text editor like Notepad. Set the following:
Sentences=RMA,RMC,GLL,GGA [note, no spaces]
Port=COM8; Baud=19200
SAVE
5. Open Eltima VSPD - a fully functional trial is available
Pair Ports, COM8 and COM9
6. Press WinKey+X. In Device Manager: Electronic Team VSP Ports COM8/COM9 should show.
7. Run FS2004 and open default airport (optionally after this, create a flight plan using FS2004 flight planner and SAVE).
8. Start SkyDemon (current version 29 Sept 2022)
Menu: SetUp - 3rd party devices - set COM9 and Baud=19200
Menu GoFlying - connect RS232
-
1
-
-
Thank, John. I have reading to do!
-
Thanks for putting all this together.
I need to learn about macros first and then apply that knowledge. I am not too sure where the Lvars log file is to be found. I have the 'Log Lua plugins separately' option checked under Logging.
Best,
John
-
Thanks a bunch, Roman. You're a star!
I have it working on a yoke button. Oddly, I can't get it to work from a key press but that's not important.
Just a comment. P3Dv4.5 doesn't have a \modules folder. I put the "P40_Hyd.mcro" file into the same default folder as the FSUIPC6 files:
C:\Users\Howard\Documents\Prepar3D v5 Add-ons\FSUIPC6
And a question: May I ask where you found the "P40_Hyd.mcro" file? Just in case i want to try something similar again.
-
Thanks very much for this. I would be in business if I knew anything about LUA.
I've perused the LUA documents and the Advanced Users pdf. I will study them more carefully over the next day or two - there's a lot in there which is probably not relevant to my problem. But maybe I need a full understanding? Do I need to learn the language? I just don't know.
The bit that escapes me so far is where to enter the relevant information? Is there a LUA.ini file somewhere which can be edited? I couldn't find it.
I have the Lua_Plugins_20190320 folder with the examples folder.
Where on earth to begin?
-
Thanks, Pete.
I will have look into your suggestions. I agree a button would be preferable but I have very few buttons at my disposal and they are needed for other things.
I sent the log so you'd know I was using the latest iteration of FSUIPC6 for P3Dv4.5.
-
I am flying the A2A P-40 in P3Dv4.5.
The hydraulic system in this aircraft requires manual recharging after each use (flaps, gear only). This can be done in the aircraft using a mouse to press a switch on the yoke. The problem is that the switch must be kept pressed until the hydraulic pump has completed its task. When released at that point, the pump switches off. It is not a toggle action, like a gear toggle. It is more like a trim switch in the way it works.
It is very awkward to do this with a mouse in the P-40. It is a complex, vibrating aircraft with many controls and switches. In bad weather it is all but impossible.
To get round this, I have tried to assign a key press -V- to this in FSUIPC6 but without information on the control I cannot confirm the assignment. On the left side, there is a 'Hydraulic Switch Toggle' option. I have tried assigning this but the switch on the yoke does not respond. In any case, a toggle switch is not what is needed.
I have checked your Controls List for P3Dv4 build 34698 but there is no control listed for a hydraulic pump 'on' with repeats.
I'd be grateful for advice. (log attached).
-
I ran the 4.97a installer and all is well. My original settings all preserved.
Remarkably so, in fact, as for whatever reason FSX hasburst into life with '3-D' perspective I never had before!
Thanks again, as always, Pete. You never fail!
-
Until today, that was the last time I flew FSX-SE. I've lost all my FSUIPC settings too! No newer file.
C:\Users\Howard\AppData\Roaming\Microsoft\Windows\Recent has the same file with today's date in Explorer, but still 30/4/2020 in the log.
-
I run FSX-SE on one HDD, and P3Dv4.5 on another. Windows 10.
When I flew FSX-SE today, after a few month's gap, the FSUIPC options did not show on the top in window mode.
I've attached the log file. I am not running the beta version from Steam, although I might once this is sorted.
I'd be grateful for advice.
-
Thanks, Pete.
FSUIPC.ini attached.
I agree that it could be caused by an addon. I have very few of these as FSX-SE has been newly installed on its own HDD on this PC. It could be hardware too, of course. It could be Steam related too I suppose.
I have FSX boxed on a separate drive, so I can test the yoke, throttle quad, and rudder pedals in that sim.
Regards,
John
-
This time, she did it all - uncommanded Spot view, Gear Down, Brakes set whilst on autopilot, totally hands off. .
Log attached.
Regards,
John
-
Hmm. How interesting! The Gear Down/Up action was unrelated to my use of the elevator trim buttons on the yoke. Yes, it can happen hands off.
I began to use the Offset SWord setting because it gave me finer iterations with some plane which I flew in the distant past, probably in FS2002. I just kept using that way of setting up trim with each new simulator that came along. I never had trouble with it. It just worked fine, so why change?
I have changed now and it'll be interesting to see if using the normal FS control via FSUIPC will solve the problem.
The antiskid brakes thing is a total mystery. Even if I wanted to I have no idea how to set that up. I couldn't find a switch or lever for cockpit activation. I'll run that particular problem past the C-47/DC3 chaps.
Some test flying to do before I report back. Thanks again.
John
-
Thanks. The FSX controllers are all disabled.
This time, (only the second occasion it's done this) when I landed the plane the brakes appeared to come on full without command from me.
Whatever way this worked it stopped the plane dead in its tracks as if it landed on glue. Had I done this myself with differential brakes, I'd have tipped the old girl over on her nose and spoiled her day.
Log attached with button/key and events log as requested. Seems some problem with toggle engine failure.
John
-
log file:
********* FSUIPC4, Version 4.974b (14th March 2018) by Pete Dowson *********
Windows 10 Home 64 Bit reported as Build 18362, Release ID: 1903 (OS 10.0)
fsx.exe version = 10.0.62615.0
Reading options from "F:\FSX_Steam\steamapps\common\FSX\Modules\FSUIPC4.ini"
Running inside FSX Steam Edition on Windows 10
Module base=56CF0000
User Name="John Fee"
User Addr="gooneybird@yankeedodge.com"
FSUIPC4 Key is provided
WideFS7 Key is provided
0 System time = 29/04/2020 12:18:42
15 ------ Module Version Check ------
15 acontain.dll: 10.0.62615.0
15 api.dll: 10.0.62615.0
15 controls.dll: 10.0.62615.0
15 fs-traffic.dll: 10.0.62615.0
15 G3D.dll: 10.0.62615.0
422 language.dll: 10.0.62615.0
422 sim1.dll: 10.0.62615.0
422 visualfx.dll: 10.0.62615.0
422 weather.dll: 10.0.62615.0
422 window.dll: 10.0.62615.0
422 ----------------------------------
437 Trying to connect to SimConnect Steam ...
500 FS UNC path = "\\RUDOLF\FSX\"
562 ---------------------- Joystick Device Scan -----------------------
562 Product= Saitek Pro Flight Rudder Pedals
578 Manufacturer= Saitek
578 Vendor=06A3, Product=0763 (Version 1.1)
578 GUIDs returned for product: VID_06A3&PID_0763:
578 GUID= {DAA2C6C0-EC02-11E7-8008-444553540000}
578 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0
578 Product= CH ECLIPSE YOKE
578 Manufacturer= S
578 Vendor=068E, Product=0051 (Version 0.0)
578 GUIDs returned for product: VID_068E&PID_0051:
578 GUID= {DAA25190-EC02-11E7-8006-444553540000}
578 Details: Btns=26, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R895,U1023,V1023,X1006,Y1023,Z1023
593 Product= GF-TQ6 Throttle System
609 Manufacturer= GoFlight
609 Vendor=09F3, Product=0200 (Version 1.0)
609 GUIDs returned for product: VID_09F3&PID_0200:
609 GUID= {DAA29FB0-EC02-11E7-8007-444553540000}
609 Details: Btns=4, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R225,U215,V219,X209,Y220,Z221
672 -------------------------------------------------------------------
672 Device acquired for use:
672 Joystick ID = 2 (Registry okay)
672 2=Saitek Pro Flight Rudder Pedals
672 2.GUID={DAA2C6C0-EC02-11E7-8008-444553540000}
672 Device acquired for use:
672 Joystick ID = 1 (Registry okay)
672 1=CH ECLIPSE YOKE
672 1.GUID={DAA25190-EC02-11E7-8006-444553540000}
672 Device acquired for use:
672 Joystick ID = 0 (Registry okay)
672 0=GF-TQ6 Throttle System
672 0.GUID={DAA29FB0-EC02-11E7-8007-444553540000}
672 -------------------------------------------------------------------
703 FSUIPC couldn't run: "F:\FSX-Steam\steamapps\common\Modules\FSX.bat" [Error=2]
703 LogOptions=00000000 00000001
703 -------------------------------------------------------------------
703 ------ Setting the hooks and direct calls into the simulator ------
703 --- CONTROLS timer memory location obtained ok
703 --- SIM1 Frictions access gained
703 --- FS Controls Table located ok
703 --- Installed Mouse Macro hooks ok.
703 --- Wind smoothing fix is fully installed
703 --- SimConnect intercept for texts and menus option is off
703 --- All links checked okay
703 -------------------------------------------------------------------
703 SimConnect_Open succeeded: waiting to check version okay
703 Trying to use SimConnect Steam
703 Opened separate AI Traffic client okay
2468 Running in "Microsoft Flight Simulator X", Version: 10.0.62615.0 (SimConnect: 10.0.62615.0)
2468 Initialising SimConnect data requests now
2468 FSUIPC Menu entry added
2484 \\RUDOLF\FSX\flights\other\FLTSIM.FLT
2484 \\RUDOLF\FSX\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.air
6562 Weather Mode now = Theme
14297 \\RUDOLF\Users\howar\AppData\Roaming\Microsoft\FSX\Previous flight.FLT
54968 User Aircraft ID 1 supplied, now being used
54968 Aircraft loaded: running normally now ...
55265 System time = 29/04/2020 12:19:38, Simulator time = 05:32:41 (03:32Z)
55281 Aircraft="Aircreation582SL red"
163922 Starting everything now ...
167093 Advanced Weather Interface Enabled
191672 \\RUDOLF\FSX\SimObjects\Airplanes\Douglas C-47 3.1406-MVC\Douglas_DC3_v1.5.air
192281 Aircraft="Douglas C-47 Piedmont Airlines MVC"
281953 Sim stopped: average frame rate for last 89 secs = 28.1 fps
281953 Max AI traffic was 9 aircraft (Deleted 0)
1132828 Sim stopped: average frame rate for last 735 secs = 28.7 fps
1132828 Max AI traffic was 9 aircraft (Deleted 0)
1134781 === Closing session: waiting for DLLStop to be called ...
1142390 === DLLStop called ...
1142390 === Closing external processes we started ...
1143390 === About to kill any Lua plug-ins still running ...
1143562 === Closing global Lua thread
1144578 === About to kill my timers ...
1144797 === Restoring window procs ...
1144797 === Unloading libraries ...
1144797 === stopping other threads ...
1144797 === ... Button scanning ...
1144922 === ... Axis scanning ...
1145031 === Releasing joystick devices ...
1145031 === Freeing macro memory
1145031 === Removing any offset overrides
1145031 === Closing all WideFS threads
1148468 === Clearing any displays left
1148468 === NOTE: not calling SimConnect_Close ...
1148468 === AI slots deleted!
1148468 === Freeing button memory ...
1148468 === Closing my Windows ...
1148468 === Freeing FS libraries ...
1149484 === Closing devices ...
1149484 === Closing the Log ... Bye Bye! ...
1149484 System time = 29/04/2020 12:37:52, Simulator time = 05:46:48 (03:46Z)
1149484 *** FSUIPC log file being closed
Minimum frame rate was 26.0 fps, Maximum was 28.9 fps
Minimum available memory recorded was 2146Mb
Average frame rate for running time of 846 secs = 28.7 fps
Maximum AI traffic for session was 9 aircraft
Memory managed: 207 Allocs, 206 Freed
********* FSUIPC Log file closed *********** -
I am running v. 4.974 in FSX-SE.
Whn flying in the cruise the landing gear lowers itself - uncommanded by me. At exactly the same time the cockpit view switches itself to locked spot view.
This happens with several different aircraft when flying on autopilot. I am completely hands off when it happens.
All FSX controls have been checked umpteen times for both axes and buttons in normal and slew modes. There is nothing assigned to FSX control as far as I can see..
I use an FSUIPC axis setting for the HAT view. It works perfectly.
Saitek pedals, CH Eclipse Yoke and GF-TQ6.
I am at a loss to know as to what is causing this. It is very irritating although easily remedied. It seems only to happen once during a flight although I rarely fly longer than a couple of hours.
I wonder if it could be time related. Whatever it is, I've not come across anything similar in 50 years of flightsimming!
Regards, John
-
Obscene frame rate indeed! It was a new install so I hadn't got round to checking that. Now, set to a more leisurely 28 fps.
Applied Kosta's tweaks, extensive tests today with default scenery and aircraft and all is well, no more twitching control surfaces.
Thanks again. You never fail!
-
Thanks, Pete, I was doing my homework in the FAQ section.
Disabling all the controllers in FSX-SE seems to have done the job. Although the yoke and rudder now respond correctly, the yoke movement in the VC is jerky, and similarly the elevators and ailerons in spot view. I was flying the default Cessna Skylane. It doesn't look good and in the past it has always meant problems.
Anyways, so far so good. Thanks again.
John
-
MOVED FROM FAQ REFERENCE SUBFORUM!
I have installed FSX-SE on a new HDD. I have P3DV4 on a separate HDD on the same PC. I have been using FSUIPC for years and like the many options and controls it provides.
This is my set up: CH Eclipse yoke, GoFlight GF-TQ6 quadrant, Saitek rudder pedals. These have all been calibrated, and appear stable in W10 calibration.
When I delete the FSX-SE axes and button controls for my three game controllers I can sometimes set the controls in FSUIPC normally.
In flight though, either the yoke or the rudder, not usually the throttle controls, fail to obey instructions.
Checking back to the FSX-SE default controls, I find that many of these have reinstalled - button and axis commands. I've rebooted and restarted FSX-SE each time deleting the defaullt commands till I am blue in the face. But the problem persists.
The log file is below and I've attached the JoyScan.csv.
I'd be grateful for advice.
John
********* FSUIPC4, Version 4.974b (14th March 2018) by Pete Dowson *********
Windows 10 Home 64 Bit reported as Build 18362, Release ID: 1903 (OS 10.0)
fsx.exe version = 10.0.62615.0
Reading options from "F:\FSX_Steam\steamapps\common\FSX\Modules\FSUIPC4.ini"
Running inside FSX Steam Edition on Windows 10
Module base=52C60000
User Name="John Fee"
User Addr="gooneybird@yankeedodge.com"
FSUIPC4 Key is provided
WideFS7 Key is provided
15 System time = 04/04/2020 08:42:19
15 FLT UNC path = "\\RUDOLF\Users\howar\Documents\Flight Simulator X Files\"
15 ------ Module Version Check ------
15 acontain.dll: 10.0.62615.0
15 api.dll: 10.0.62615.0
15 controls.dll: 10.0.62615.0
15 fs-traffic.dll: 10.0.62615.0
15 G3D.dll: 10.0.62615.0
15 language.dll: 10.0.62615.0
15 sim1.dll: 10.0.62615.0
15 visualfx.dll: 10.0.62615.0
15 weather.dll: 10.0.62615.0
15 window.dll: 10.0.62615.0
15 ----------------------------------
46 Trying to connect to SimConnect Steam ...
62 FS UNC path = "F:\FSX_Steam\steamapps\common\FSX\"
125 ---------------------- Joystick Device Scan -----------------------
140 Product= Saitek Pro Flight Rudder Pedals
140 Manufacturer= Saitek
140 Vendor=06A3, Product=0763 (Version 1.1)
140 GUIDs returned for product: VID_06A3&PID_0763:
140 GUID= {DAA2C6C0-EC02-11E7-8008-444553540000}
140 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0
140 Product= CH ECLIPSE YOKE
140 Manufacturer= S
140 Vendor=068E, Product=0051 (Version 0.0)
140 GUIDs returned for product: VID_068E&PID_0051:
140 GUID= {DAA25190-EC02-11E7-8006-444553540000}
140 Details: Btns=26, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R460,U1023,V1023,X1006,Y1023,Z1023
156 Product= GF-TQ6 Throttle System
171 Manufacturer= GoFlight
171 Vendor=09F3, Product=0200 (Version 1.0)
171 GUIDs returned for product: VID_09F3&PID_0200:
171 GUID= {DAA29FB0-EC02-11E7-8007-444553540000}
171 Details: Btns=4, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R219,U219,V222,X225,Y228,Z228
171 -------------------------------------------------------------------
171 Device acquired for use:
171 Joystick ID = 2 (Registry okay)
171 2=Saitek Pro Flight Rudder Pedals
171 2.GUID={DAA2C6C0-EC02-11E7-8008-444553540000}
171 Device acquired for use:
171 Joystick ID = 1 (Registry okay)
171 1=CH ECLIPSE YOKE
171 1.GUID={DAA25190-EC02-11E7-8006-444553540000}
187 Device acquired for use:
187 Joystick ID = 0 (Registry okay)
187 0=GF-TQ6 Throttle System
187 0.GUID={DAA29FB0-EC02-11E7-8007-444553540000}
187 -------------------------------------------------------------------
203 LogOptions=00000000 00000001
203 -------------------------------------------------------------------
203 ------ Setting the hooks and direct calls into the simulator ------
203 --- CONTROLS timer memory location obtained ok
203 --- SIM1 Frictions access gained
203 --- FS Controls Table located ok
203 --- Installed Mouse Macro hooks ok.
203 --- Wind smoothing fix is fully installed
203 --- SimConnect intercept for texts and menus option is off
203 --- All links checked okay
203 -------------------------------------------------------------------
203 SimConnect_Open succeeded: waiting to check version okay
203 Trying to use SimConnect Steam
203 Opened separate AI Traffic client okay
1015 Running in "Microsoft Flight Simulator X", Version: 10.0.62615.0 (SimConnect: 10.0.62615.0)
1015 Initialising SimConnect data requests now
1015 FSUIPC Menu entry added
1015 F:\FSX_Steam\steamapps\common\FSX\flights\other\FLTSIM.FLT
1015 F:\FSX_Steam\steamapps\common\FSX\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.air
6109 Weather Mode now = Theme
19312 User Aircraft ID 1 supplied, now being used
19312 Aircraft loaded: running normally now ...
39578 System time = 04/04/2020 08:42:59, Simulator time = 08:42:25 (16:42Z)
39593 Aircraft="Aircreation582SL red"
45234 Starting everything now ...
46406 Advanced Weather Interface Enabled
228375 Sim stopped: average frame rate for last 185 secs = 219.4 fps
228375 Max AI traffic was 28 aircraft (Deleted 0)
231109 === Closing session: waiting for DLLStop to be called ...
233765 === DLLStop called ...
233765 === Closing external processes we started ...
234781 === About to kill any Lua plug-ins still running ...
234937 === Closing global Lua thread
235953 === About to kill my timers ...
236156 === Restoring window procs ...
236156 === Unloading libraries ...
236156 === stopping other threads ...
236156 === ... Memory checking ...
236156 === ... Button scanning ...
236265 === ... Axis scanning ...
236375 === Releasing joystick devices ...
236375 === Freeing macro memory
236375 === Removing any offset overrides
236375 === Closing all WideFS threads
239359 === Clearing any displays left
239359 === NOTE: not calling SimConnect_Close ...
239359 === AI slots deleted!
239359 === Freeing button memory ...
239359 === Closing my Windows ...
239359 === Freeing FS libraries ...
240375 === Closing devices ...
240375 === Closing the Log ... Bye Bye! ...
240375 System time = 04/04/2020 08:46:19, Simulator time = 08:45:30 (16:45Z)
240375 *** FSUIPC log file being closed
Minimum frame rate was 128.0 fps, Maximum was 349.6 fps
Minimum available memory recorded was 2720Mb
Average frame rate for running time of 185 secs = 219.1 fps
Maximum AI traffic for session was 28 aircraft
Memory managed: 96 Allocs, 95 Freed
********* FSUIPC Log file closed *********** -
Thanks a bunch to you both. I do read the manual but not always closely enough I have to confess! Your encouragement is very welcome.
-
Thanks.
Problem was Windows calibration. Wonky. Not sure how it became wonky as I checked it along the way. I changed USB power management to off as advised.
Now, I am mostly sorted.
Not sure how to calibrate 5 flap detentes in the Maule with the non-detented axis lever. As it stands the flaps do a full up or down cycle using only half the available lever run.
Thanks again for your help, Pete.
John
-
I've used FSUIPC in various iterations for years with FS2002 onwards.
This is a new install of P3DV4.5 in Windows 10.
The GF quadrant is not properly recognised. Of the 6 axes, only 5, 6 going left to right are seen at all. I can assign these to Mixture set and Flaps set, but the assignment is quickly 'forgotten'.
Axes 1-4 are not recognised at all.
The Ch Eclipse Yoke and Saitek rudder pedals are recognised and can be assigned in the usual way.
I have attached the Joyscan.csv and the log file follows.
I'd be grateful for advice.
********* FSUIPC5, Version 5.155 (27th March 2020) by Pete & John Dowson *********
Running inside Prepar3D v4
Module base=7FFCE3910000
Windows 10 Home 64 Bit reported as Build 18362, Release ID: 1903 (OS 10.0)
Prepar3D.exe version = 4.5.13.32097
Reading options from "D:\Prepar3D v4\Modules\FSUIPC5.ini"
Checking the Registrations now ...
User Name="John Fee"
User Addr="gooneybird@yankeedodge.com"
FSUIPC5 Key is provided
WideFS7 Key is provided
78 System time = 28/03/2020 10:07:59
110 FLT UNC path = "\\RUDOLF\Users\howar\Documents\Prepar3D v4 Files\"
110 Using DialogMode
157 FS UNC path = "\\RUDOLF\D\Prepar3D v4\"
235 ---------------------- Joystick Device Scan -----------------------
235 Product= CH ECLIPSE YOKE
235 Manufacturer= S
235 Vendor=068E, Product=0051 (Version 0.0)
250 GUIDs returned for product: VID_068E&PID_0051:
250 GUID= {DAA25190-EC02-11E7-8006-444553540000}
250 Details: Btns=26, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R1023,U1023,V1023,X1006,Y1023,Z1023
250 Product= Saitek Pro Flight Rudder Pedals
266 Manufacturer= Saitek
266 Vendor=06A3, Product=0763 (Version 1.1)
266 GUIDs returned for product: VID_06A3&PID_0763:
266 GUID= {DAA2C6C0-EC02-11E7-8008-444553540000}
266 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R511,U0,V0,X127,Y127,Z0
266 Product= GF-TQ6 Throttle System
282 Manufacturer= GoFlight
282 Vendor=09F3, Product=0200 (Version 1.0)
282 GUIDs returned for product: VID_09F3&PID_0200:
282 GUID= {DAA29FB0-EC02-11E7-8007-444553540000}
282 Details: Btns=4, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R223,U77,V221,X41,Y42,Z227
282 -------------------------------------------------------------------
297 Device acquired for use:
297 Joystick ID = 1 (Registry okay)
297 1=CH ECLIPSE YOKE
297 1.GUID={DAA25190-EC02-11E7-8006-444553540000}
297 Device acquired for use:
297 Joystick ID = 2 (Registry okay)
297 2=Saitek Pro Flight Rudder Pedals
297 2.GUID={DAA2C6C0-EC02-11E7-8008-444553540000}
297 Device acquired for use:
297 Joystick ID = 0 (Registry okay)
297 0=GF-TQ6 Throttle System
297 0.GUID={DAA29FB0-EC02-11E7-8007-444553540000}
297 -------------------------------------------------------------------
328 ### Checking Prepar3D.cfg
328 Controllers are set to ON, using RawInput within P3D
328 -------------------------------------------------------------------
328 LogOptions=00000000 00000001
328 -------------------------------------------------------------------
328 SimConnect_Open succeeded: waiting to check version okay
328 Opened separate AI Traffic client okay
19328 Running in "Lockheed Martin® Prepar3D® v4", Version: 4.5.13.32097 (SimConnect: 4.5.0.0)
19328 Initialising SimConnect data requests now
19328 FSUIPC Menu entry added
19344 ... Using Prepar3D with Academic License
19375 \\RUDOLF\Users\howar\AppData\Local\Lockheed Martin\Prepar3D v4\Prepar3D_Default.fxml
19375 \\RUDOLF\D\Prepar3D v4\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air
37860 \\RUDOLF\D\Prepar3D v4\SimObjects\Airplanes\Maule_M7_260C\Maule_M7_260C.air
37891 ### The user object is 'Maule M7 260C'
37891 ### Mode is NORMAL
38203 ### Mode: PAUSE on
111547 Loading Complete ...
111563 ### Mode is NORMAL
112375 User Aircraft ID 2 supplied, now being used
112391 Aircraft loaded: running normally now ...
112641 System time = 28/03/2020 10:09:51, Simulator time = 14:00:01 (19:00Z)
112641 Aircraft="Maule M7 260C"
149891 ### Mode: PAUSE on
151407 -------------------- Starting everything now ----------------------
151407 Starting WideServer now ...
152469 Advanced Weather Interface Enabled
181157 Sim stopped: average frame rate for last 31 secs = 111.1 fps
181157 Max AI traffic was 25 aircraft
181157 -------------------------------------------------------------------
260610 Sim stopped: average frame rate for last 63 secs = 112.4 fps
260610 Max AI traffic was 0 aircraft
260610 -------------------------------------------------------------------
1152391 Sim stopped: average frame rate for last 882 secs = 113.0 fps
1152391 Max AI traffic was 0 aircraft
1152391 -------------------------------------------------------------------
1154375 === Closing session: waiting for DLLStop to be called ...
1162250 === DLLStop called ...
1162250 === Closing external processes we started ...
1163250 === About to kill any Lua plug-ins still running ...
1163407 === Closing global Lua threadJohn
-
Thanks, again, Pete.
I've a lot of research to do on this. I am not sure if XPUIPC is coded for Linux. The Windows version supports plugins.
I've posted on the XP11 boards and will take it from there.
John
-
Thank you very much for your reply, Pete.
The XPUIPC developer does not host a forum and as far as I can see all development work has stopped. I will email him but am not hopeful.
I will follow up your reading suggestions, your FS Lua examples will help with context.
Regards,
John
SkyDemon with FS9/GPSout in Windows 10
in User Contributions
Posted
Thanks, John. Sorry for bother. I thought I put it there!