black-hawk

Hi Peter I tray to found with FS interrogate were are the offset of Crono timer in FS, but without result. :cry: Can you help me? I use for Zulu Hours 023b and for Minutes 023c It Work fine :D I wont use the crono with start and stop utility becouse I have made the Clock Instrument All the best Ettore Mele http://www.747-400.it

Peter a rapid question. In the offset 0BCC = Spoiler Arm (size 4), (0=off, 1=arm for auto deployment), are 0 and 1 values or bit? Thanks in advance Ettore Mele

Thanks Peter using the values and not the bits everything now works magnificently Regards Etore Mele

Dear Peter I have another question to do you. :roll: You will tell me that I am annoying but if I don't succeed after thousand attempts I turn to you for your immense experience. I don't succeed in letting work the switch of the Autobrake. I am using the offset 2x2f80 with bit that varies from 0 ,1,2,3,4 to 5 for the varied positions of the switch. Unfortunately when I pass to the position that corresponds to the bit 2 the switch it disappears from the fs2004 panel and the Autobrakes information from the EICAS of Magenta, and it doesn't return anymore. Do you know for case where I am wrong? Perhaps for the offset 0x2f80 have to use some values (0,1,2,3,4,5) and not of the bits? Regards

Dear Peter I would like to know if the offsets exist for the 747-400 Rudder Trim. Particularly would need me to know what the offset is (to 16bit it would be better since it would have a value that varies from -16386 to +16386) to vary the trim of the Rudder, and what the offset that I can use for visualizing the position of the Rudder trim is (to 16bit it would be better since it would have a value that varies from -16386 to +16386) considering that I have built a display to visualize the value. I thank you in advance Ettore Mele http://www.747-400.it

Hi Peter Do you remenber the offset of Caution Warning pushbutton on main glare of 747-400 (for mute sound and light) I had used FS interrogator but I don't have find Ettore Mele http://www.747-400.it

I am Stupid!! or in tilt for many many value, code, offset ecc. More Thanks All Cutoff works fine Ettore Mele

Yes offset 4f4 with value 301 to 311 work fine but not complete implement . This is only a test for secondary EICAS in the F7 page Ettore Mele

Hi Peter Today I have wired all button od throttle at my EPIC. I think that engine1 cutoff is: 3af0 I think that engine2 cutoff is: 3a30 I think that engine3cutoff is: 3970 I think that engine4 cutoff is: 38b0 I don't understand the istruction that I must send at this offset, becouse I read =0 & =1. this is bit same maganta command? I use EPICMAPPER. Can you explane me how can do? Ettore Mele

I have a system based on: Pentium 4 2,4Gbs 1Gb rams, Card video ATI Radeon 9700Pro fs2004, more addons texture, mesh, etc. On same Pc I have run: MCP Magenta, EPIC, EPICMAPPER, SquwakBOX, Servinfo, Teamspeek. On other 4 PC: PFD/ND Magenta, CDU Magenta with PMSound on same PC, RCDU Magenta, EICAS Magenta. The all has connected to the internet with a router ADSL at 640KB. All system alone elegant works there are pauses on the net every so many seconds and not always.

All my computer (5) are in WindowsXP Professional Editions. Do you think witch TCP/IP is better decision? Ettore Mele This is the small log of my Client with pause. ******* WideClient.DLL Log [version 6.101] Class=FS98MAIN ******* Date (dmy): 29/11/03, Time 14:57:43.484: Client name is PFD 63 Attempting to connect now 79 Connection made okay! 9500 Connection closed by server! 9500 Ready to try connection again 9563 Attempting to connect now 9563 Connection made okay! 12000 New Client Application: "pfd" (Id=1616) 310063 Reception maximum achieved: 31 frames/sec, 13989 bytes/sec 310063 Reception average achieved whilst connected: 17 frames/sec, 6633 bytes/sec 310063 Max receive buffer = 14143, Max send depth = 92 310063 ******* Log file closed (Buffers: MaxUsed 94, Alloc 11331 Freed 11331 Refused 0) ******* In the WideServer.log nothing of important Ettore Mele

Hi Peter I would like to ask you an example of WideClient.ini and WideServer.ini adapted for a net 100mbps that and has shaped with the protocol IPX/SPX. If you can send me them in email. I ask you this since my net sometimes has some long pauses around 10 seconds Thanks Ettore Mele

When crash with plane! FS2004 don't crash only EPICMAPPER replay SYSTEM: WideFS/WideClient has stopped responding. Shutting down and I must Reload FS9 and EPICMAPPER Ettore

Anyone know how can solve this problem? When after crash fs2004 restart in epicmapper I receive a message: SYSTEM: WideFS/WideClient has stopped responding. Shutting down I must Reload FS9 and EPICMAPPER I use FSUIPC 3.11 and WideFS 6.101 and Y added in the ini file of FSUIPC MakeItVersionFS2002=yes Ettore Mele http://www.747-400.it

Anyone know the offset for command with EPICMAPPER (Encoder) the rudder trim? I use EPIC and I don't wont use analog for trim. Ettore :(