papabaer

Hello Pete, one question: Is it possible to use FS-Navigator on a WideFS-client ? Or do you know a programm like FS-Navigator which will work ? Best regards Chris

Hello Pete, I was reading over the threads here and I think, maybe you can help me. When I push the throttle to maxium (or something else over 0 %) after a few minutes of flight (sometimes seconds) the value is going to 0% on the screen. If I then only touch the real throttle a little bit, value is there again, but after a few secs (or mins) the same again. it happens with TQ6, and the same when I disconnect TQ6 and connect Sim-Yoke. Can this be a problem of FSUIPC ? Did I miss to do some settings there ? Other things like mixture are working ony throttle not (if i use a C172). Or is it a problem of USB-ports maybe ? Best regards Chris

Hello Pete, could you please send me the new FSUIPC. Like you know, I use the TQ6 and many RP48 and other GF-Parts and have the same problem. Thanks Chris

Hello to all, I tried to use Wideview and WideFS together via IPX/SPX to seperate it from the normal internet (otherwise my wife is killing me, everytime I´m flying she can´t use the internet or only very slow), by using 2 network adapters. Wideview works fine, but Widefs gets now connection ? I tried it on the same computer where normally wideview is working (but this was OFF of course FS2004 not started). I used socket 8002. What other value is possible. Thanks for help Chris

Thanks for your help. At the moment everything is working. I changed The resolution to 2400*600 and set the limiter to 20 and... i took out one memory chip (512MB) wich makes problems..and I found a bios mistake, the DDRAM-Speed was too slow..and I took the old certified driver. and since then, everything worked perfect and smooth.. with FSUIPC and with WideFS. Thanks Pete for your help

Hello Pete, i tested over today: FS9 with newest driver for parhelia and FSUIPC was working without problems. Only problem that I have is a very bad(!) Framerate, always jumping from 11.2 to 30 and back, or between to every value. What framerate do you get ? I have a matrox-parhelia 128MB and my computer is an P4/2.6Ghz with 1.5GB of ram. Maybe I should by a new motherboard for 3 Ghz ? I let the simu fly over the night, for a long time test. Tomorrow I install the wideFS again, for the next test. Have a nice sleep Chris

I only use the standard FS9. and it works without probs, when FSUIPC is not installed. I use at the moment the last Signed-Driver, not the beta driver for Matrox-Parhelia. Maybe I should use the Beta ?

Hello Pete, i started trying a flight with FSUIPC only, and without WIDEFS. IN 1-2 hours I well see, what happend. What is WX and FLT ?? I only start WideFS and the Pro-magneta gauge on the computer, without changing anything special. one thing strange: After taking out the FSUIPC the rotary switch of the Go-Flight MPC for Altitude adjust is not working any more. Even after reinstalling FSUIPC it did not work. But maybe this is a problem of Go-Flight. Thanks for your help. Chris

Hello Pete, I renamed them to DLT ! So they are not used any more. On the other end are 2 Computers with project-magneta Capt.PFD/ND and EICAS1. That´s why I need WideFS. Later this will be 4 computers but at the moment I installed 2 only. I do not use any additional software for weather. Just the standard weather from FS9. I did´t not make anything in FSUIPC, only registering. What will happen, if I delete the weather.dll ? I only loaded your FSUIPC from the internet to have the newest version and then copied the FSUIPC.dll and wideserver.dll and wideserver.ini in the modules folder. Best regards Chris

Hello Pete, it´s me again. I think, I really have a problem with FSUIPC. Here the storie: My simu did not work (I wrote you), after 1/2Hour it stopped: (Panel.dll, weather.dll). Now I reinstalled everything and started from beginning on. 1GB-Ram und FS9 only. Worked. Flights 3* for 20hours was no problem. Then I installed the Go-Flight products (alltogether 14 parts) and tested again over 6 days. No problems in 20Hour flights, everywhere oh the world. (I just programmed the autopilot and let the plane fly. At last I installed FSUIPC and WIDEFS with reg.key yesterday evening. After 1/2Hour the same problems written at the beginning. I tried a second time->shut down after 3/4 hour, weather.dll. I renamed FSUIPC and WIDEFS and started a new flight. It´s now flying without problems for 3 hours. Do you have an idea what it can be ? Maybe it´s only in computers with go-flight modules? I took the newest versions of your programm, yesterday evening from schiratti.com. Please help Chris

Hello, i´ve had the same problem, and it´s really a Go-Fight problem. You have to use the 1.31 built and copy some TXT in the devices.cfg, this is explained. And ask for the new beta dll, I have it and up to know, now problems any more. Chris

Hello Pete, the problem happend again. I reinstalled FS9 completely and it worked. Then I installed Go-Flight-Products and it did not work any more in a acceptable way. The FS2002 is working. My Question to you: You have Matrox Parhelia, did you get FS2002 work on all three monitors in strechted mode ? If I try to do this, it only shows until the size of 2 monitors, if I want to stretch the window more than this, I only see dark ! Does it work on your system or is this a problem of FS2002 ? Best regards Chris

Hello Pete, it was the Parhelia driver. I took the newest one and installed it, now it works nearly perfect. Another question. You have a document where all key-codes from FS9 are written, but how can I use them with Go-Flight modules ? For example there is a numner like 66532 what does that mean ? Can i translate this into SHIFT+E or something ? Best regards and a happy new year Chris

Hello Pete, I don´t knwo if this you could help me with my problen, but I just ask. I use a 2.6Ghz PC with Matrox Parhelia and 1.5GBRam WIN-XP, FS9 and FSUIPC. The FS9 just shuts himself down while generating the scenery (original, no add-ons) or sometimes while flying after 2-3 Minutes. Why I ask you: With Fthe older version of FSUIPC (3.128) it happend while starting up, with the new one, downloaded today it shuts down after 2-3 minutes. There is no error message, nothing. And it´s not depending if the other computers with proejct magenta are working or not. Maybe you knwo something about this ? Best regards Chris

Hello, I´m building a new cockpit with project-magenta software and much more. the Problem is, that resetting a flight on the server causes the 4 Proj.Magenta computers to fail. Connection failed. Sometimes even when I start the computers they fail to connect. But not all, and not every time the same. Can you help me with this problem ?