Jump to content
The simFlight Network Forums

pap

Members
  • Posts

    30
  • Joined

  • Last visited

About pap

  • Birthday 01/01/1970

Contact Methods

  • Website URL
    http://

Profile Information

  • Location
    LOWL

pap's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Thanks for help, I changed the INI from the Client as told, and its working again. Strange is only that I didnt change the Client for the last Years, 'only' have to change the main PC? Best Regards from Austria Peter
  2. Thanks for answer, will check in the evening Peter
  3. Good evening! After a long time of absence I have to ask a stupid Question, sorry. I lost my main PC, so I setup th PC new. After installing FS2004, FSUIPC and WideFS in current versions, I registered both successfully, and copy the Backup Files of my FSUIPC.INI and WIDEFS.INI. Setup LAN like before (Static IP 172.20.20.200, Firewall off, Client can ping the main PC (FS_00)) FSUIPC works fine. But I am not able to get a connection from any (unchangesd) client PC to the Main PC. After playing arround for some hours, I decide to ask for help here. I poste the INI file from the Wideserver and the Client, and also the LOG´s Thanks for help. Best Regards from Austria Peter [Config] AutoRestart=0 AutoUpdateTime=13 MaximumBlock=4096 NoStoppedRestarts=Yes Port=8002 RestartTime=10 SendTimeout=15 TCPcoalesce=No AdvertiseService=1 ProtocolPreferred=UDP Port2=9002 ; ----------------------------------------------- [user] Log=Errors+ AllowShutdown=Yes ShuddownHotKey=67,10 ;Run1=c:\fs.exe ;Run2=C:\Programme\SA_WXR\sa_wxr.exe ;Run3=C:\pmSounds\PMSounds.exe ;Run4=C:\pmwetherset\pmGetWeather.exe ;Run5=C:\FS_Override.exe ;Close1=Yes ;Close2=Yes ;Close3=Yes ;Close4=Yes ;Close5=Yes ; =============================================== [ClientNames] 1=FS_01 2=FS_04 3=FS_02 4=FS_03 5=FS_05 6=FS_06 ********* WideServer.DLL Log [version 6.78] ********* Blocksize guide = 4096 (double allowed) Date (dmy): 17/03/09, Time 19:19:50.375: Server name is FS_00 17375 Initialising TCP/IP server 17375 Initialising IPX/SPX server 17375 IPX/SPX socket() failed [Error=10047] Address family not supported by protocol family 17375 Failed to start IPX/SPX Server 17375 Initialising UDP/IP server 18047 Broadcasting service every 1000 mSecs 18047 Preferred protocol = UDP 28515 Restarting service due to total lack of use 28515 Failed to start IPX/SPX Server ; PLEASE SEE WideFS documentation for parameter details ; ===================================================== [Config] ServerIPAddr=172.20.20.200 Port=8002 Window=32000,32000,112,27 Visible=Yes ButtonScanInterval=20 ClassInstance=0 NetworkTiming=5,1 PollInterval=2000 ResponseTime=18 ApplicationDelay=0 TCPcoalesce=No WaitForNewData=500 MaxSendQ=100 Priority=3,1,2 OnMaxSendQ=Log NewSendScanTime=50 ProtocolPreferred=UDP MailslotTiming=2000,1000 Port2=9002 ; ----------------------------------------------- [user] Log=Errors+ Run1=c:\FS\PFD\PFD.EXE AllowShutdown=Yes Close1=Yes Keysend4=115,8,ThunderRT5Form,"Project Magenta Glass Cockpit" Keysend5=112,8,ThunderRT5Form,"Project Magenta Glass Cockpit" Keysend6=118,8,ThunderRT5Form,"Project Magenta Glass Cockpit" ; =============================================== ********* WideClient Log [version 6.78] Class=FS98MAIN ********* Date (dmy): 17/03/09, Time 19:04:28.911: Client name is FS_01 981 c:\FS\PFD 981 c:\FS\PFD\PFD.EXE 1051 Attempting to connect now 2083 Trying to locate server: Protocol not yet decided 2083 Failed to connect: waiting to try again 4146 Attempting to connect now 11116 New Client Application: "pfd" (Id=1736) 68618 Trying to locate server: Protocol not yet decided 313200 New Client Application: "pfd" (Id=1664) 382650 Trying to locate server: Protocol not yet decided
  4. Hello again Works great! After disconnecting the flaps axis, an new offset (I tried 5733) is coppied to 0BDC to FS Flaps. If the Altn Flap system is armed and the switch is set to extend, I count to 16000 very very slow. The value is written to 5733 by my pmsystem and copied to 0BDC by another faster program that I also use for brake override, autobrake, and maximum brake eficency depending on runway condition. 20 Minutes after starting Altn Flaps extending, Flaps have moved to 25 degr. So only the new synoptic in upper Eicas is missing, will check that in the next days. Was a great weekend Thank again Peter Austria
  5. Hi Pete sounds good, I check this if available. peter
  6. So I dont send the IPC logs. Yes you are right, on brakes I do the same as Thomas Richter do in his Autobrake utility, and I set a maximum brake value to limit brake eficency depending on runway condition. On the Flaps I want to disconnect the axis at first, means Flaps error, flaps dont extract. After doing the steps on the non normal CL, depending on aircraft , the Flap value for FS should run very very slowly to a maxium value (on747-400) the value coresponding to 25degrees of flaps. The Count up (or down in retracting Flaps) comes from my software, which also displays the different synoptic in the upper EICAS (for 747-400, i dont know this on 737) Of course I am very interested in a discussion about this, the disconecting feature of fsuipc and the new graphic overlay idea, the first time for the last year I see the chance to build and to develop new things. Best Regards Peter Austria
  7. Hit Pete! Thanks a lot for your quick work. I tried this the last hour, the disconnection works, but I think I didnt check 2 things: First If I write 3 (means Bit 0 and Bit 1) set for Brake diconnection to 341A, the Axis for Flaps and spoilers are disconnected too. This isnt a big problem, I disconnact all 4 axis, and copy them for myself (all 4 of them) But in the Flap axis, the Offset 3414 seems to be the raw data (from -16k to +16k) and the target position 0BDC seems to be the FS Data (from 0 to +16 k). Also I dont know the correlation to the FSUIP calibration (to notches). So the straight forward copy (needed because all axis are disconnected if I write anything to 341A is not working for the Flaps. If disconnection works, I think the other Copy releated problem is not a problem, I can write fixed values to 0BDC. Thanks a lot again Peter Austria PS: transfered this to your Forum
  8. Thanks a lot I am looking forward! Peter
  9. Hello to all I was working with the new (since Ver 3.777) offsets 3416 and 3418 as "copytarget" of 0BC4 and 0BC6 if the Brake axis are disconnectet. They work prety fine for me. I want to ask if there is a posibillity to disconnect the Axis for the flaps too, just working in the same way as the brake axis? If this will be possible, a way to simulate "alternate Flaps" with very long extendig time is opend. Thanks for help Peter Austria
  10. Good evening! I am searching for a possibility to load a situation file in my Fs9.1 with the help of FSUIPC. I hope the english words "situation file" is correct, I only own the german FS2004 and here its called "Flug auswählen". Its the first option in the first menu. I am able to set the Start-Up Situation on Offset 0024 but it only works in startup as the name told us. Can anybody help me please Thanks a lot Peter AUSTRIA
  11. Yes I checkt pm offsets, they dont provide them (splitted for each PC) at the moment. I tryed the offset 542A of course, but I am not able to differece between upper and lower EICAS display. I think I will ask enrico for this improvement. So I will try to send the keystrokes to fs from my hardware, then they will be redirected Thanks! Peter
  12. Thanks for answer The reason why I want to do this is, that in 747-400 I should be able to select the content of the lower EICAS (Normal lower eicas, but could be ND or Upper Eicas too if any fault occours) or also the content of the inbound CRT could be PFD, ND or EICAS. In the 747 the switches are on the main panel located just in front of the pilot and named "CRT Display Controls" In my sim setup the PFD,ND is one PC, the upper EICAS is on a second PC, the lower EICAS is on a third PC. So lets say if I want to change the displayed item on the lower EICAS PC, I have to press the F1, F2 F3key but only on the PC working as lower EICAS. If I have to change the content of the inbound CRT of the Pilot I also have to send F1, F2 or some other Fx key to the PC working as upper EICAS. the pmoffset 04F4 didnt work, because it changes the display on all PC´s running the GC at the same time. So I thougt to do this with the key send command from WideFS. Hope this helps. Best Regards Peter Austria
  13. Good evening! I am working with the feature of WideServer/Client/FSUIPT to send keystrokes from main PC(running FS9.1) to client PC(s) running pmmagenta and Wideclient. This feature works fine. Now I want to send this keys if my Hardware is generating an event (e.g. closing a switch) This event is setting bits in the Area $330F and so on(17byte) which is documented in "FSUIPC for Programmers.doc". While I can observer bits changing here if I press the keys in FS (which are of course installed in FSUIPC for sendkey Widefs) I am not able to set and reset bits over FSUIPC in my own programmed interface. Is this offsetarea ($330F/17) readonly? Thanks for help Peter Austria
  14. Thanks, didt another sesrch, a value of 0.05 will fitt. A very low value, but I cant find anoter solution. Strange isnt it? Thanks again and best Regards from Austria peter
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.