Dylan

Hi Pete, I let my frame rate stopped at 30 fps as it was before. I set Pollinterval=10 in FSUIPC.ini and all it's now workink good. Does letting this string interferes or make some other things wrongs? If not i found the solution. Thanks for all Fabrizio

Hi Pete, i didn't check repeating box, i assigned it only for press action, and the button is not assigned in any other Fsuipc or FS action (i also checked FS9.CFG and FSUIPC.INI to be sure). I enabled buttons and keys log as you said, i pressed the button 10 times but the action was sent only for 2 times, i then checked the log and only the 2 working times were written (i sent the PM MCP HDG toggle but i also tried with other actions): 72688 Button changed: bRef=0, Joy=1, Btn=5, Pressed 72688 [buttons] 1=P1,5,C2025,0 72688 FSUIPC Control Action: Ctrl=2025, Param=0 72688 PM action: 5410 bits toggled: 0x02000000 73704 Button changed: bRef=0, Joy=1, Btn=5, Released 78657 Button changed: bRef=0, Joy=1, Btn=5, Pressed 78657 [buttons] 1=P1,5,C2025,0 78657 FSUIPC Control Action: Ctrl=2025, Param=0 78657 PM action: 5410 bits toggled: 0x02000000 81188 Button changed: bRef=0, Joy=1, Btn=5, Released 86157 System time = 13:14:17, FS2004 time = 13:13:10 (12:13Z) 86157 *** FSUIPC log file being closed Memory managed: 4 Allocs, 253 Freed ********* FSUIPC Log file closed **** If i assign the button to an FS action trough FS assignement window all is working correctly. It looks like Fsuipc can't get all the button presses but only some and randomly. I also tried to assign the same PM function to a key and it works correctly, but if i assign the button to press the key instead of the PM option, same problem occurrs. Thanks in advance Fabrizio

Hi Pete, I'm continuing tryin with no success. The problem only occurrs with buttons and not with keys. I have Project Magenta MCP running in a second pc and i want to disable the autopilot with my yoke button. If i assign the PM function to a key in FSUIPC all works ok but if i assign it to a button (i have tried many) it works only sometimes. In Windows Joystick Properties all the buttons react correctly so no hardware problem. I'm getting crazy :-) Fabrizio

Hi Thomas, the button is not used in "button section" of FS of course. It's really strange and i can't understand why. I use Windows 2000 if it can help Thanks Fabrizio

Hi Pete, when i try to assign a function to my CH yoke trough the buttons section in FSUIPC i can't make it working correctly. The function works only sometimes when i push the corrispondent button. For exemple if i assign to a button a Project Magenta function or a simpler one (Parking brakes, Pause, ecc...), then function is called only after i push the button 5 or more times (10 or more sometimes) and then nothing for many times again. I'm using the last FSUIPC version but the problem was also with older ones. Thanks in advance Fabrizio

Thanks Pete, i will try as soon as possible Dylan

Hi all, i'm building my own home cockpit and i'm guessing if there is a reading offset to know the TOTAL aircraft weight i can then send to my hardware display. I know there are some panel gauges showing this so i assume there is an offset for this. Thanks in advance Dylan

Hi Pete, it really works great. I really thank you so much for support Dylan

Hi Pete, thank you very much for the file, it really works great. I only have a question: is it normal that i'm not allowed to send keys to the application started by "runkey" ? My old client.ini was : [user] Log=Errors+ ActionKeys=Yes Run1=c:\freefd\eicas.exe Run2=c:\freefd\nd.exe KeySend1=83,8,Run1 KeySend2=86,8,Run1 KeySend3=65,8,Run2 KeySend4=73,8,Run2 .............. ecc... and i could send keys to the appropriate application correctly. The new client.ini: [user] Log=Errors+ ActionKeys=Yes Run1=c:\freefd\eicas.exe Runkey2=c:\freefd\nd.exe KeySend1=83,8,Run1 KeySend2=86,8,Run1 KeySend3=65,8,Runkey2 ---> NOT SENDING KeySend4=73,8,Runkey2 ---> NOT SENDING KeySend5=............ ............................ Keysend24=Runkey2 ---> the key to activate nd.exe but it seems not possible to send keys to nd.exe application anymore. Thanks again Dylan

Ok thank you very much again. I will let you know if i can manage it. Dylan http://www.home-cockpit.com

Hi Pete and thanks for reply, i'm going to explain the reason of my request: I'm using the P8R FMC (http://fmc.scumari.nl/). One of its feature is to export created flight plans to FreeFD Navigation Display to follow it graphically during the fly. The problem is that FreeFD ND reads this data ONLY when starting, so i need to prepare the flight plane in the FMC in my cockpit, export it with a key pressing (FMC feature) and THEN starting ND, otherwise data are not updated. I hope i explained correctly. Sorry for my english Thanks again Dylan

Hi all, I have some softwares started by wideclient with the "Run" commands but i need to start one only when sending a keypress in wideserver pc. Is it possibile? The PFD, CDU, EICAS are started by wideclient in secondary pc and i need to start ND only when i press a key in the main (Flight Simulator) pc. I checked in the WideFS tutorial but i couldn't find, maybe my fault. Thanks in advance Dylan

So i will wait for a fix in Ivap. Thanks again Dylan

Hi Pete and thanks for reply, yes i enlarged AdvDisplay window but i only can see something for just a moment (much less than a second, very fast) and then the last line appears and covers everything written before. So the text is not written on many lines but only in one and last part of the message is the only one visible at the end Thanks again Dylan

Hi all, I have an home cockpit with AdvDisplay running and Ivap in a remote pc. Every time i want to display the Atis of an online ATC i get only the last line in AdvDisplay. I tryed changing mode (continuous and single line) under FS "options -> general" settings, i also tryed several AdvDisplay settings (multiline for exemple) with no results. I make an exemple. If this is the Atis in Ivap: -------------------------- This is Alghero Approach information ECHO recorded at 0930z Landing rwy 20 / Take-off rwy 20 LIEA 120845Z 00000KT 9999 SCT025 BKN080 09/07 Q1031 Transition Level FL60 / Transition Altitude 5000ft Confirm information ECHO on initial contact -------------------------- i only get "Confirm information ECHO on initial contact" (the last line)displayed for some seconds and nothing more. Can someone please help me? Thanks in advance Dylan

Hi Samuel, i made it working correctly setting "offset byte set" in FSUIPC with the correct parameter (0 or 1) Thanks Dylan

Hi Pete and thanks for reply, i read about it in the user section and also tried make it to work with no success. What kind of offset should i set (Byte set, Word Set, Dword Set, Byte Setbits, ecc...) for the IVAP functions as said in the upper link? The parameter i think must be 0 or 1 according Charlie mode or standby. I'm sorry but i'm not good with hexadecimals and offset stuff. Thanks again Dylan

Hi all, the new release of IVAP has the feature to read specifics offsets for Squawk mode and Ident button from FSUIPC. I'd like to know how to add in the FSUIPC.INI buttons or keys doing this job, (changing squawk mode an Ident) cause i tried with no success. This is the IVAO page about the offsets: http://www.ivao.org/softdev/IvAp/sdk.asp Can Pete or someone please help me? Thanks in advance Dylan

Yes Pete, i included it in client.ini and now without it's all ok. Thanks Dylan

Hi Pete, I really feel bad cause I forgot "postkeys=yes" in the client.ini and now all works ok. I really thank you for all your support and please forgive me to have used your time for a thing of my fault. Thanks again so much Dylan

Hi Pete, unlucky there is no possibility to reassign the keys in the software. I tried using notepad.exe instead of the ND instrument as you suggested, but no keys are typed in notepad, normal or capital. I don't know if it's a notepad problem for this. I really don't know what to do now. Maybe it's a delay about "shift" pressing as Bob said? Waiting for news Thanks again Dylan

Hi, I'm using FreeFD ND on client pc and sending keys trough widefs. It all works fine with normal keys functions "v,n,i,ecc.." but not with capital ones "A,R,V,ecc..." This is a part of my wideclient.ini: ....... KeySend9=67,8,Run2 ( c keypress ) KeySend10=65,9,Run2 ( A kepress ) ........ The problem is with the "A" kepress, because the ND get it as "a" and so it shows another function. This happens for every capital key: it seems it's alwais non-capital, even if i wrote the "9" parameter in keysend lines and not "8". Can anyone help me? Thanks in advance

Ok thanks Pete Dylan

Hi all, I have 2 questions i can't find an answer: - I run FSBUS hardware on a remote PC controlling FS2004 through WIDEFS and i'm asking if there's a way to activate the pushback function from the remote PC. In FSBUS router there is not this function and i couldn't find any offset about it in FSUIPC guide. -2nd question: I run Teamspeak on a remote PC, i assigned a key for talking, I made teamspeak starting by WIDEFS and assigned this keypress from WIDEFS too, but the talking function is not working. I have other softwares correctly working with WIDEFS keypress function but not teamspeak press to talk function. Any idea? Thanks in advance Dylan

Hi Dimitris, i normalli use the FS2TS sowftware to change teamspeak channels tuning the com radio. You can get this software here: http://www.fsflyreal.com/ Bye Dylan