Gnacino

I Moved to a new pc and trying to use my GF MCPPRO on the default 787 in MSFS. On my old pc, I would use the Goflight Interface Tool and the open GF's GFDevFSX in the Goflight setup' But now, When I try to open GFDevFSX, I get the error message "This application failed to start because it's side-by-side configuration is incorrect". I don't know what that means. It's not open anywhere else. Any ideas? Thanks, Gnacino

Thanks Pete. I talked to John at Goflight and we straighten out the mess. It turned out that GF's configuration was conflicting with FSUIPC. So we deleted GF's Gnacino

The TQ6 has 6 levers labeled A B C D E F. I posted my problem at Goflight but have not had an answer yet. There is no uninstall for the TQ6. Not really sure what the problem is. I'll wait a while and if there is no resolution, I guess I'll reinstall FSX and everything else. Not looking forward to that. That's what makes this hobby so interesting, 25% flying, 75% solving and fixing. Do you find this to be true to your setup also Pete? Gnacino

It is strange. In FSX menu, The throttles show up as lever B. I never calibrated them in FSX. I can't even delete the setting. Whatever lever I move, it shows as B. Gnacino

Downloaded the .92 and as I suspected, still nothing. I even tried unplugging the TQ6 on and off, same thing. I don't know if this is an issue with GF or FSUIPC. Gnacino

The issue with the T7 is not what concerns me here. I'm working with that on their forum. What concerns me now is that FSUIPC is not recognizing my TQ6 at all. My other hardware is fine. I went into Win 7's joystick calibration and all the levers on the TQ6 are recognized but not in FSUIPC. I will download .92, but I don't think that will solve it. Thanks Gnacino

I have calibrated my TQ6 with FSUIPC before and use it on all my ac. But now, I'm trying to set my flaps & spoilers for a new ac, PMDG'S T7. When I move the flap lever there is no change in the numbers. When I go to Axes assignment, and move the throttle levers, nothing registers. I don't have my throttle set up in FSX. I'm using FSX on Win7 and have FSIUPC 4.91 registered. The throttles and flaps work on all my ac correctly except the T7. On the T7, only the throttles work. The flaps & spoilers don't move at all. Can't set them in FSUIPC Thank you. Gnacino

I put all of the files where they need to go. I got some of the the switches to work, but I am having a dificult time trying to program the rotary knobs. Is it possible that you can post your [buttons.Captain Sim 757-200] section so that I can simply paste yours. It would be very much heplful and simplefed. Thank You, Gnacino

One more thing, What should I open your file with? I have Vista and it does not recognize the file. Is Notepad ok? Gnacino

Okay, got that, simple enough. I do use their throttle quadrant and the EFIS. so that means not to diable the driver, right? Gnacino

Hi, Appreciate your work in getting the GoFlight MCP to work with the Captain Sim757...I had posted many inqueries on various forums an no one was able to help. The video that you posted on You tube is diificult to read and understand. You shot it from an angle and I cannot see what you are disabling, Second, your computer is not in English so I am not sure what it all means. I am going to print this out and go thru it one step at a time and let you know how it went. If you can maybe get inot a little more detail about disabling the GF driver. Thank you very much, Gnacino

Hi, Can I use WideFS to place the PFD and HSI on a client pc? I have read the instructs and it states to put the path in the run=1. Is this just for a program or can I use it for a gauge as well? If I can use it for a gauge, should I just copy the gauge to a folder in th client pc and put the path in the Wideclient ini? Thanks, Gnacino

Hi Pete, Thanks for your speedy reply. I have version 4.6a. From your web site, it looks like that is the latest version. I don't see a 4.66. As for the programing the macros, are you saying that when I get the window that says "Please wait...", just click somewhere else and proceed to the next step? Don't understand why Captain Sim would write programs for AC don't can't utilize FSUIPC to the fullest. It's not like Captain Sim is a "Mickey Mouse" company. It is a very complicated ac and people that buy this are always looking to get even more realistic. I have the Level d, and that seems to be compliant. Anyways, I should be complaining about this on their forum. Thanks Pete, Gnacino

Hi, I have been trying to program some mouse macros for my Captain Sim 757 so that I can use some buttons and switches on my Goflight EFIS. I am going thru the Addon menu in FSX. When I go to "Buttons & Switches" tab, I select "start Macro", and then I put a name for my macro, CS757", hit okay, and I get a message, Saving and/or reloading FSUIPC. Please wait" It is now 12:44am my time now and I have been waiting for at least thirty minutes and the message just stays there. I have tried it several times with the same result. I checked the modules folder in FSX to see if it created a folder named CS767.MCRO. No such folder. I have your latest registered FSUIPC and FSX with SP 1 & 2. I am running Vista 32bits with all updates installed. If I press okay when the message is on, I try some mouse clicks all around the panel and I get no green or red window. Going back to the FSUIPC, the "End Macros" is still there. Did I miss something? Thanks, Gnacino

Hi, I posted in the Level D forum, but I noticed that those posts were 2 years old. These posts seem more up to date. I am having a hell of time trying to get the GF EFIS to work with my 767. I pasted and did as Steve instructed but no joy. I pasted this in my FSIUPC config in the modules folder in FSX, this what it looks like, [buttons] 1=P2,4,K65,9 2=P2,1,K190,10 3=P0,1,K74,10 4=P1,1,K51,9 ButtonRepeat=20,10 9=P158,7,C65585,0 10=P1,0,K80,9 11=P1,2,K50,8 12=P1,4,K49,8 13=P2,8,K74,10 14=P2,9,K69,9 15=R1,11,K69,10 16=P1,10,K112,11 17=P1,8,C66477,0 19=P1,5,C66391,0 20=P1,3,C66390,0 21=R1,7,C65607,0 22=R1,6,C65615,0 25=H64,1,K101,10 26=P64,2,K56,10 28=P64,3,K56,10 29=P64,0,K101,10 31=P64,4,K99,10 32=P64,5,K101,10 33=P64,6,K100,10 34=P64,8,K97,10 35=P64,9,K96,10 36=P64,10,K96,10 ///37=P170,30,K68,8 ///38=P170,31,K68,12 [MacroFiles] 2=LVLD767 [buttons.Level D Simulations B767-300ER ] 7=P170,21,CM2:5,0 8=P170,21,CM2:5,0 9=P170,21,CM2:5,0 10=P170,21,CM2:5,0 11=P170,21,CM2:5,0 12=P170,21,CM2:4,0 13=P170,20,CM2:5,0 14=P170,20,CM2:5,0 15=P170,20,CM2:5,0 16=P170,20,CM2:5,0 17=P170,20,CM2:5,0 18=P170,22,CM2:5,0 19=P170,22,CM2:5,0 20=P170,22,CM2:5,0 21=P170,22,CM2:5,0 22=P170,22,CM2:5,0 23=P170,22,CM2:4,0 24=P170,22,CM2:4,0 25=P170,23,CM2:5,0 26=P170,23,CM2:5,0 27=P170,23,CM2:5,0 28=P170,23,CM2:5,0 29=P170,23,CM2:5,0 30=P170,23,CM2:4,0 31=P170,23,CM2:4,0 32=P170,23,CM2:4,0 33=P170,24,CM2:5,0 34=P170,24,CM2:5,0 35=P170,24,CM2:5,0 36=P170,24,CM2:5,0 37=P170,24,CM2:5,0 38=P170,24,CM2:4,0 39=P170,24,CM2:4,0 40=P170,24,CM2:4,0 41=P170,24,CM2:4,0 42=P170,16,CM2:1,0 43=P170,16,CM2:1,0 44=P170,16,CM2:1,0 45=P170,16,CM2:1,0 46=P170,16,CM2:1,0 47=P170,16,CM2:2,0 48=P170,16,CM2:2,0 49=P170,17,CM2:1,0 50=P170,17,CM2:1,0 51=P170,17,CM2:1,0 52=P170,17,CM2:1,0 53=P170,17,CM2:1,0 54=P170,17,CM2:2,0 55=P170,17,CM2:2,0 56=P170,17,CM2:2,0 57=P170,18,CM2:1,0 58=P170,18,CM2:1,0 59=P170,18,CM2:1,0 60=P170,18,CM2:1,0 61=P170,18,CM2:1,0 62=P170,18,CM2:2,0 63=P170,19,CM2:1,0 64=P170,19,CM2:1,0 65=P170,19,CM2:1,0 66=P170,19,CM2:1,0 67=P170,19,CM2:1,0 68=P170,9,CM2:6,0 69=P170,8,CM2:6,0 70=P170,11,CM2:7,0 71=P170,10,CM2:7,0 72=P170,28,CM2:10,0 73=P170,29,CM2:11,0 74=P170,30,CM2:8,0 75=P170,31,CM2:9,0 76=P170,5,CM2:12,0 77=P170,4,CM2:15,0 78=P170,3,CM2:13,0 79=P170,2,CM2:14,0 80=P170,1,CM2:16,0 96=P170,14,CM2:3,0 97=P170,15,CM2:36,0 98=P170,13,CM2:34,0 99=P170,12,CM2:35,0 100=P170,25,CM2:5,0 101=P170,25,CM2:5,0 102=P170,25,CM2:5,0 103=P170,25,CM2:5,0 104=P170,25,CM2:5,0 105=P170,25,CM2:4,0 106=P170,25,CM2:4,0 107=P170,25,CM2:4,0 108=P170,25,CM2:4,0 109=P170,25,CM2:4,0 Then, I made a text file in the modules folder titled "LVLD767.MCRO" and this is what is in that folder, [Macros] Module="B767main.GAU" 1=HSI+=RX30a0*X8bcc 2=HSI-=RX30c0*X8bcc 3=SETBUGS=RX3970*X8bcc 4=RANGE+=RX3060*Xa1cc 5=RANGE-=RX3080*Xa1cc 6=LEFTVORADF=RX7470*X83cc 7=RIGHTVORADF=RX74f0*X83cc 10=BARO+=RX3330*Xa1cc 11=BARO-=RX3250*Xa1cc 12=EFISNAV=RX2f50*Xa1cc 13=EFISARPT=RX2f90*Xa1cc 14=EFISDATA=RX2fd0*Xa1cc 15=EFISWPT=RX3010*Xa1cc 16=EFISTCAS=RX30e0*Xa1cc 27=THRUSTTEMP+=RX6f50*Xa1cc 28=THRUSTTEMP-=RX6df0*X55cc 34=ENGINEDISPLAY=RX1d60*Xa1cc 35=STATUSDISPLAY=RX1d90*Xa1cc 37=CLOCKRUN=RX2850*Xa100 38=CLOCKHOLD=RX2890*Xa1cc 39=CLOCKRESET=RX2820*Xa1cc 40=CHRTOGGLE=RX27b0*Xddcc Module1="B767pedestal.GAU" 8=DH+=R1:X4540*Xa1cc 9=DH-=R1:X44d0*Xa1cc Module2="B767Afds.GAU" 17=NAVMIN+=R2:X2130*Xa1cc 18=NAVMIN-=R2:X21d0*Xa1cc 19=NAVMJR+=R2:X2030*Xa1cc 20=NAVMJR-=R2:X2070*Xa1cc 23=AUTOBRAKES- 23.1=R3:Xf330*X8bcc 23.2=R2:X1f00*Xa1cc 24=AUTOBRAKES+ 24.1=R3:Xf330*X8bcc,31 24.2=R2:X1ed0*Xa1cc 25=ALTNFLAPS+=R2:X1bb0*Xa1cc 26=ALTNFLAPS-=R2:X1b60*Xa1cc 33=FOVORDME=R2:X22c0*X6acc 36=CAUTIONCANCEL=R2:X1d30*X56cc 41=GOAROUND=R2:Xdeb0*X55cc None of the buttons, switches or knobs do anything. Just got the unit this am and it is 11:00 pm now. I have been messing with this all day. In fact, I am possesed! I have been going over and over and I cannot see what is wrong. If you can take the time to look over my data and see if you can find what is wrong it will be very much appreciated. I am running Vista HP 32 bits, UAC off, FSUIPC 4.5 registered, and have the latest driver from Goflight 1.93 build 20, FSX with SP1 & 2 and the latest update from Level D Thanks, Gnacino