Jump to content
The simFlight Network Forums

stopnicki

Members
  • Content Count

    45
  • Joined

  • Last visited

Everything posted by stopnicki

  1. stopnicki

    Error Downloading FSUIPC 5.13

    Hello Pete and all Just to properly close this thread, I just wanted to advise that, upon uninstalling the Microsoft Windows Updates which were automatically installed on May 7, 8 and 9, all issues disappeared, and IDM is working normally. I have told the IDM folks about this. And, of course, I have changed the Microsoft updates settings, so that I am always asked before one is installed. Cheers! And a Happy Mothers Day to all the moms in the forum and to those moms who are somehow associated with it!! Roberto
  2. Hello Pete and all: I have been unable to download the latest version of FSUIPC5.13, as I get an "An error occurred during download. Please try again" message. This has happened on two different computers. (Windows 7 Pro, in both) Any guidance is appreciated. Roberto
  3. stopnicki

    Error Downloading FSUIPC 5.13

    I finally managed to download and, as you suspected Pete, it was totally on my end. Allow me a few lines, to spare any grief for anybody else. I use Internet Download Manager (IDM) for all my downloads. I checked Google (what else?) and found an answer. The download address, is: "https://fsuipc.simflight.com/beta..... etc" All I had to do in the refused download, was to delete the first "s", so that the download page now read: "http://fsuipc.....etc" and IDM was happy Go figure!! All's well that ends well. Thanks Pete for the patience. And thanks Tom for chiming in. I am happy. Cheers Roberto
  4. stopnicki

    Error Downloading FSUIPC 5.13

    Pete: I just tried to download another add-on, just to see if something is blocking the download at this end, and it downloaded OK. Roberto
  5. stopnicki

    Error Downloading FSUIPC 5.13

    Hi Pete: Sorry for the delay (babysitting duties). I get the same message when trying to download from the Schiratti site (it says version 124 over there). Anybody else highlighting this? Roberto
  6. stopnicki

    Error Downloading FSUIPC 5.13

    Here Pete. In the downloads link. Roberto
  7. Hello: I just want to post here, an issue that has been reported in the B747-400 v3 forum of PMDG, and that I experienced myself. After downloading and installing the new version of the B747-400, compatible with P3Dv4, it would load without cockpit screens, no landing gear, no response to joysticks and several other issues. Somebody disabled the newly installed FSUIPC5 ("original version", not the ..01) and the B747-400 worked fine. I disabled FSUIPC5, and this also solved the PMDG B747-400 for me (and apparently several others) I, and others, left a help ticket with PMDG's Technical folks and I am hopeful they will connect with Pete and will soon find the reason for, and a solution to, this issue. I post so that others who might be experiencing this, are aware. Regards, Roberto
  8. Happy New Year to everybody in this forum! Pete, hopefully your cold is easing up and you are feeling much better, for a good start to the year. Roberto
  9. stopnicki

    FSUIPC5121b vs FSUIPC5121c

    Thank you Mario. I will do that Roberto
  10. Hello: In the Updated Modules forum, there is an option to download and install the "FSUIPC5121b" version, which I have already done. Underneath it, however, there is an option to download the "FSUIPC5121c" version, with a statement that it is only for users already using it. Is it necessary to download the "c" version and install it after the "b" version has been installed? With regards, Roberto
  11. stopnicki

    PMDG's new B747-400 and FSUIPC5

    I am also glad to report that all is well with "m" and both PMDG's 747 and 777. I have read in another forum, that L-M has found and fixed an issue related to the flag SIMCONNECT_CLIENT_DATA_PERIOD_ON_SET not working with SimConnect_RequestClientData, and is now testing it. Not that it is very important at this point, but I just wonder if all of this is somehow connected. We waited patiently for PMDG to resolve their issue and now, hopefully, L-M will soon relase their fix. Roberto
  12. stopnicki

    PMDG's new B747-400 and FSUIPC5

    I am experiencing the same issue as "jannier" above. (Excluding the "FSUIPC kills PMDG" comment, as we now know that it is a PMDG issue). This is just a report, for Pete's benefit (if any). Regards, Roberto
  13. stopnicki

    PMDG's new B747-400 and FSUIPC5

    Very good news! We'll keep one eye here for the "k" version and the other eye on the PMDG forum, for their fixes. Roberto
  14. stopnicki

    PMDG's new B747-400 and FSUIPC5

    Hello everybody: I believe that developers of other "complex" add ons, such as PMDG, have not yet released their updates for P3Dv4. When they do, it will be interesting to see how those products interact with the simulator. There are other developers who have found a bug in the code of the simulator, and have had it confirmed by L-M. Who knows, this whole issue might be more related to P3Dv4 itself and really "nobody's fault". In the meantime, loading the B747-400 after a default aircraft is not a really big deal. And then, I can enjoy the new experience with these new products. Roberto.
  15. stopnicki

    PMDG's new B747-400 and FSUIPC5

    Just as an additional thought after reading the multitude of reports about this conflict between the QOTS II and FSUIPC5, it appears to me that another factor might be the operating system. Is it possible that those with Windows7 are encountering the issues while those on Windows10 are not? i also posted this thought in the PMDG forums. Regards, Roberto
  16. stopnicki

    PMDG's new B747-400 and FSUIPC5

    Three basically new platforms trying to talk to each other, they are bound to find some conflicts. I have read in forums of other utility developers, that they have also encountered issues with P3Dv4, as you did Pete, and L-M is trying to resolve them, as they did with you. I am sure that eventually all this will be fixed. Opening the sim with a default airplane, is quite OK for the interim. "This, too, shall pass" Regards, Roberto
  17. stopnicki

    PMDG's new B747-400 and FSUIPC5

    I removed one line at a time, so that after three times, none of the lines was there. Then I removed one line, but always left the other two in place. In all six trials, the B747-400 worked OK, but only after a default airplane was loaded first. In all six trials, the B747-400 would not work, if loaded first. Regards, Roberto
  18. stopnicki

    PMDG's new B747-400 and FSUIPC5

    Yes Pete. I am sending whatever I find to both you and them. Eventually it will be resolved. I am sure. Just let me know if I can help with anything else. Regards, Roberto
  19. stopnicki

    PMDG's new B747-400 and FSUIPC5

    Hello Pete: Added the three parameters to the .INI file. Yesterday I had already changed to the "FSUIPC 5.101 TEST" version. PMDG B747-400 is now working. I have started and restarted the simulator several times, opening different versions of the B747-400 and everytime, it has worked. But, it will only work if I first load a default (I use the Piper Cub) airplane. (If I load the sim with the B747-400, it will not work at all, even if I next load a default and then try to reload the B747-400 in the same session) I am also running Windows7 Pro (SP 1). Regards, Roberto
  20. stopnicki

    PMDG's new B747-400 and FSUIPC5

    Hi Pete: I am not contradicting my first "no KEY" post. I removed .KEY, as you suggested. Shut P3Dv4. And upon restarting it, the B747-400 worked. I sent my first reporting email. Shut P3Dv4 again. A second time. Then restarted P3Dv4 and, the B747-400, did not work, showing the same issues as before. I then sent the second reporting email. Since then, I "disabled" the FSUIPC.dll by renaming it (old_......) and the B747-400 has been working OK through a number of simulator (and computer) restarts. The P3Dv3 version, that also re-installs automatically, has always run the B747-400 OK, every time, with the registered FSUIPC that I own for it. I will happily try to help with testing any software that might help in diagnosing whatever is going on. Regards, Roberto
  21. stopnicki

    PMDG's new B747-400 and FSUIPC5

    I am sorry to report that after shutting down P3Dv4 and later starting it again, with the unregistered FSUIPC5, resulted in the same problems with PMDG's B747-400. I shut down P3Dv4, I disabled the FSUIPC.dll and restarted P3Dv4. B747-400 is now working well. Regards, Roberto
  22. stopnicki

    PMDG's new B747-400 and FSUIPC5

    Please let me know how else I can assist. Roberto
  23. stopnicki

    PMDG's new B747-400 and FSUIPC5

    Hello Pete: Removed the "...KEY" And all worked! Roberto
  24. stopnicki

    64 bit compatibility?

    Hello Pete: -->>>>I've moved all the support questions over to the Support FSrum, under the thread title "FSUIPC status questions". <<-- Could you please post a link to this thread and forum? thank you! Roberto
  25. stopnicki

    64 bit compatibility?

    Good to read that you, Pete, are back from vacation and already immersed in work. it is only when "big" events happen in simulation (FSX, Prepar3d in all its versions, etc.) that all of us (maybe even you!) understand again and again, the value of what you do. I am sure that with some time, lots of work, several patches and upgrades and, much patience, P3D v4 will become a great simulator that all of us will enjoy. many regards, Roberto
×

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.