Jump to content
The simFlight Network Forums

lucy

Members
  • Posts

    28
  • Joined

  • Last visited

Everything posted by lucy

  1. Hi Pete, is version 3.82 compatable with FS2002. Regards Trev
  2. Hi Pete, I would be most grateful if you could help me with this. To date, all the switches and buttons I've managed to program using FSUIPC and offsets has been achieved by obtaining assistance from you and or other forum members. My main question is how can I determin what should be used from the FSUIPC drop down list just by looking up the offset and it's description from the FSUIPC and or Project Magenta list of offsets. EXAMPLE 1: I assigned a swith to control the SB3 transponder mode, with the assistance I received I used Offset Byte Clrbits and Offset Byte Setbits together with it's offset and parameter 1. QUESTION : From it's description how do I know whether to us Offset Byte, SByte, Word, DWord, UWord, SWord etc etc. and where does the parameter figure come from. EXAMPLE 2 : I assigned a switch to activate ALL fuel tanks, again only from help received I used Offset DWord Set, it's corresponding offset (0AF8) and again parameter 1. QUESTION : Again, from that description how should I know to use Offset DWord from the drop down list and why parameter 1. I hope I've explained my short comings sufficiently for you to help, If I can get a better understanding of what to use and when I should not need to look for assistance for what in most cases appears to be basic switch/button assigning. Many Thanks Regards Trev
  3. Thanks for that info Pete, I used the negative full throttle value and it works a treat. Many Thanks Trev
  4. Hi Pete, can you tell me the offset for the reverse thrust applicable to the 737 as after searching I can't seem to find it. I'm trying to trigger a wav file when reverse thrust is applied. Many Thanks Trev
  5. Hi Pete, I would be most grateful if you could help me with this. On selection of Flap 30 I would like to trigger a wav file in PMsounds, could you tell me the offset for that flap setting please. Many Thanks Trev
  6. Hi Pete, very sorry. I did meet show text Regards Trev
  7. Hi Pete, can you tell me how I can add a sound file to the advdisp folder to alert me when a message is coming. I have placed advdisp on a client PC and all my messages now appear on that. I've put the required sound in the main folder I guess I need to edit the ini file to make it work. Your help would be greatly appreciated Regards Trev
  8. Hi Pete, is it possible for you to add to the FSUIPC drop down list the option to assign a switch/button to activate the squawk STBY function within squawkbox. Regards Trev
  9. Hi Pete, I've recorded a series of Check Lists that I want to activate at the appropriate time via a switch / button. The wav files are placed in the sounds folder of PMsounds. When I assign the switch / button via FSUIPC what offset/s can I use to activate the recording Regards Trev
  10. Hi Pete, hope you can help. I'm looking to purchase a USB interface card to connect toggle and rotary switches to FS using the button and switches section of FSUIPC. Could you recommend one / any ???? Regards Trev
  11. HI Pete, Sorry, I should have looked before jumping !! Many Thanks Trev
  12. Hi Pete, Would it be possible in future update to include the option to assign the auto brake functios RTO, OFF, 1, 2, 3, MAX to a six position rotary switch Regards Trev
  13. Hi Pete, Could you please tell me is it possible using FS2004 and the default 737-400 to control the five functions of the auto brake using a rotary switch via FSUIPC. Many Thanks Trev
  14. Good Day Peter, could you tell me please, is it possible to plug 2 CH products flight yokes into the same PC and use FSUIPC to take information from the one sending the strongest signal. I'm currently using a changover switch Regards Trev
  15. HI Pete, Sorry, when I asked if I could assigne a yoke button to PTT, I failed to mention that my SB3 is running on a client PC. Can it still be done ?? Many Thanks Trev
  16. Hi Pete, Can you please tell me is it possible to assigne a PTT button on my flight yoke to work with SB3 Regards Trev
  17. Hi Peter, I currently use a 4 engine PFC TQ in my cockpit based on a Boeing 737, is it possible using my registered copy of FSUIPC to re-asign the reverse thrust lever to activate the flaps and the speed brake lever to activate the reverse thrust Many Thanks Trev
  18. Pete, many thanks, have downloaded 3.44 and everything seems to be fine regards Trev :wink:
  19. Hi Pete, I am trying to re-assigne the landing gear switch and the flap switch using the BUTTONS section of FSUIPC. I have assigned one to activate pushback in FS2K2 and the other to position report on my BAV flight monitor, everything works ok until I come out of flightsim and start again, the assignements won't save. is there any way I can save the changes or do I have to carry out the procedure everytime I launch flightsim ?? Many Thanks Trev
  20. Hi Peter, is there a patch available which will allow the ProMFD fuel page to see the aircraft fuel quantities in FS2002. Regards Trev
  21. Hi Peter, with a registered version of FSUIPC and WideFS installed on my system that consists of server and 5 client PC's I've encountered the following glitch. I have tried to assigne the flap switch of my PFC jet throttle quadrant to alter the range on my project magenta ND display installed on a client PC. The switch pushed up is recognised as 17-0 and the switch pushed down is recognised as 17-1 by FSUIPC yet when I assigne these buttons to PM Nd Range Inc & PM Nd Range Dec, nothing happens. However, if I assigne these keys or any other key on the TQ to a FS function it works. Your assistance would be gratfully appreciated, incidentally, I'm using FS2002 Regards Trev
  22. Hi Bjorn, I like the sound of your fuel dumping program, do you fancy sharing it with us ??? Regards Trev
  23. Hi Peter, Two questions if I may, having installed my registered versions of WideFS & FSUIPC do I need to install the new version of Wide Client, are there any benefits in doing so. is it possible to re-assigne the flap switch on my PFC TQ to activate the ND range on my PM ND installed on a client PC Many Thanks For Your Time Regards Trev
  24. Hi Peter, Many thanks for your reply's. I have purchased a registered copy of FSUIPC ( V 3.201 ) but when I installed it I encountered a few problems. I had PFC notification telling me to install V 2.85 or later My client PC's running my PM software was not responding, is that because my version of WideFS is not a registered one ?? Regards Trev
  25. Hi Guy's, I'm currently using a PFC 4 lever jet throttle quadrant but I would like to disable the landing gear switch in favour of my GoFlight panel, any ideas :?: I'm still using V 2.975 of FSUIPC Regards Trev
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.