Jump to content
The simFlight Network Forums

Volker Heine

Members
  • Content Count

    3,992
  • Joined

  • Last visited

  • Days Won

    29

Everything posted by Volker Heine

  1. Hello the values shown in the screenshot are currently the result of P3D V4. I can't imagine that P3D V5 wanted to be any different. I can't verify it because the FSC only supports P4D to V4. Volker
  2. Hello Frans, I don't no. Please publish a screenshot here like the attached example. Volker
  3. Hello Yves, FlightSim Commander has no influence on the display of VatSim or other online data. If the "AI" button has been activated in the FSC, the FSC is ready to receive the online data from the FSX. The prerequisite is that VatSim has sent the participants' online data to the FSX and that these have been received by the FSX. If the participants are visible in the FSX, they should be forwarded to the FlightSim Commander and displayed as AI. Regards, Volker
  4. Hi Yves, Please always read here: https://forum.simflight.com/topic/60271-important-everyone-please-read/ Regards, Volker
  5. Hello Yves, Sorry, but this is a known error in the geospatial data of the external supplier since 1993. The external supplier does not provide any updates. Regards, Volker Edit: Workaround ... choose a darker color for the map. Then the difference is no longer noticeable.
  6. Hello Koen, This is the wrong folder. The Airac cycle only belongs in the folder Drive:\FS Commander\Database. Please send me via E-mail the Afcad file of the airport to which the ILS was assigned to. You can find the E-mail address here: https://forum.simflight.com/topic/87556-important-information-information-importante-información-importante-wichtige-information/ Best regards, Volker
  7. Hi ???, please read here first. https://forum.simflight.com/topic/60271-important-everyone-please-read/ Please use a description of your problem in the topic and not your name. Volker
  8. Hallo Juan, Your data will be registered without errors. See the attached screenshot. Are you sure that you started FlightSim Commander as an administrator to complete the registration? Are you sure that the installation was performed as an administrator? Are you sure that the installation was NOT performed under c: /Programs? See also the note from "JGAR". If your answer is "YES" in all points, please contact me by email. You can find my address here: https://forum.simflight.com/topic/87556-important-information-information-importante-información-importante-wichtige-information/ Greetings, Volker
  9. Hello Carlos, Thanks for asking ... but the answer is no. Regards, Volker
  10. Hello Juan, Do you want to say that registration is not possible or that you have lost your key? Regards, Volker
  11. Hello VGlusica, please send me the complete subfolder /SUPPORT of the FSC as an ZIP file to my email address. You can find the address here: https://forum.simflight.com/topic/87556-important-information-information-importante-información-importante-wichtige-information/ Best regards, Volker
  12. Dennis I do not read a sentence from which I can tell that I am angry. I try to support where it seems necessary. This is the path in which the FlightSim Commander expects the data. However, if the data, according to your information on Airac.ini and on the intro screen, is not available, the FlightSim Commander is not responsible for it and cannot influence it. The really important question is the following. Why did the Navigraph program work correctly until Verion 2006 and no longer with versions 2007 and 2008? So what has changed? Has the installer been changed without notice (unlikely) or is there an operator error? And why can FlightSim Commander be responsible? Volker
  13. Dennis, I am very irritated by this statement from you. Neither the Database Manager nor the FlightSim Commander have anything to do with the installation of the Airac Cycle. As I wrote in the previous threed: The program (Airac Cycle) fsc_2008.exe installs the data of the Airac Cycle in the subfolder / Database of the FSCommander. The prerequisite is the correct selection of the FSC root folder. Look at the attached screenshot. Volker
  14. In your case, you did not select the route folder during installation. The FlightSim Commander has no influence on the installation, the user is responsible for this. Volker
  15. Wenn Du es besser weißt. Ich sehe nur das in der rechten Spalte nicht Das angezeigt wird was dort angezeigt werden sollte. Und in der linken Spalte sehe ich Etwas was dort nicht hingehört. Es liegt an Dir ob Du mein Wissen akzeptierst oder nicht. Es ist kein Muss. Definitiv liegt es NICHT am Database Manager. Wie auch, wenn dieser bisher seit 2017 funktioniert hat. Merke: Da der FlightSim Commander und Database Manager keine künstliche Intelligenz besitzen,können sie auch nicht selbstständig irgendwelche Änderungen vornehmen. Volker
  16. Hello Dennis, The program fsc_2008.exe provides the FlightSim Commander with correct installation. The DatabaseManager reads only the data from the flight simulator. So the one has nothing to do with the other The decisive factor is not what you read in the Airac.ini file but which cycle is displayed in the intro screen of the FlightSim Commander. See below. Volker
  17. Hallo Reinhold, Wichtigste Frage; was wurde nach der letzten funktionierenden Bedienung verändert? Da der FlightSim Commander keine künstliche Intelligenz besitzt, kann er nicht selbstständig irgendwelche Änderungen vornehmen. Wie aus Deinem Screenshot ersichtlich, hast Du den Prepar3D V4 Ordner verschoben. Das ist die Antwort und die Ursache war ... ... der User. Gruß Volker
  18. Hello Jim, Unfortunately I cannot verify your problem. In this context I also have a problem with your incomplete answers to my post. my post Posted Thursday at 05:33 PM No answer and/or screenshots whether the options were used correctly Posted Saturday at 06:29 AM No answer whether the settings regarding the administrator were followed. Instead, a new installation was carried out with a subsequent message Run-time error ‘462’: that I have never seen in 25 years of FlightSimCommander. I also miss an answer to my question "what has changed since it last worked properly" I need a little more cooperation, so I think we should start again from scratch Please read and answer this announcement first. https://forum.simflight.com/topic/60271-important-everyone-please-read/ Then please send me the complete subfolder /SUPPORT of FSCommander as a ZIP file via e-email. You can find my e-mail address here. https://forum.simflight.com/topic/87556-important-information-information-importante-información-importante-wichtige-information/ Volker
  19. Hello Jim, The main question is, what was changed after it worked flawlessly last month? Since the FSCommander has no artificial intelligence, it cannot make any changes independently. Are you sure that both programs (FSC & GE) run as administrator? See screenshot (sorry German WIn10 version) Regards, Volker
  20. Hi, Two things are crucial. Which version and build of GE was installed? (There are x version / builds) ***. The installation path for GE cannot be selected. In the FSCommander menu -> Options -> Online -> Folder Google Earth (depending on the version) either the main folder Google Earth or the sub-folder client must be selected. Volker *** Currently I have installed: Google Earth -> 7.1.8.3036 (32-bit) (not a Pro version) Build date -> 1/17/2017
  21. Hallo Siegfried ???, Das lässt sich von hier aus nicht beurteilen. Schade das Sie keinen Screenshot angefügt haben. Beide de-installieren. Danach entscheiden welche Version für Sie die wichtigste ist, denn da die Version 9.6 Rev 7 beide Simulatoren bedient macht 10.6 zusätzlich keinen Sinn. Für mich wäre noch wichtig die Ursache der Meldung zu kennen. In diesem Fall senden Sie mir bitte von der Version 10.6 den kompletten Unterordner /Support als ZIP Datei an meine e-mail Adresse. Die Adresse finden Sie hier: https://forum.simflight.com/topic/87556-important-information-information-importante-información-importante-wichtige-information/ Volker
  22. Wichtigste Frage; was wurde nach der letzten funktionierenden Bedienung verändert? Da der FSCommander keine künstliche Intelligenz besitzt, kann er nicht selbstständig irgendwelche, den Anwender ärgernde, Änderungen vornehmen. Ein Error 500 wird in der Programmiersprache nicht dokumentiert. Wird eine Meldung angezeigt von der ein Screenshot gefertigt und hier veröffentlicht werden kann? Volker
  23. Hello ???, Contact me by email. You can find the address using the link below. https://forum.simflight.com/topic/87556-important-information-information-importante-información-importante-wichtige-information/ Volker
  24. The selection of the correct path in the folder FSGRW is crucial. A detailed description can be found on page 39 of the FlightSim Commander 10 manual. I added page 39 below. ??? Volker FlightSim Commander 10.0 - Supplement Manual - Page 39.pdf
  25. Hello Frans, In a reply to a post you made in April, I wrote the following: What has changed since yesterday? The FlightSim Commander is not so intelligent that it independently makes any changes that the user did not make. You will now understand that I have no idea what's going on on your computer. I can only offer you to send me the complete subfolder /SUPPORT of the FSC by e-mail as a ZIP file. You can find my e-mail address here: https://forum.simflight.com/topic/87556-important-information-information-importante-información-importante-wichtige-information/ Regards, Volker
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.