Jump to content
The simFlight Network Forums

Volker Heine

Members
  • Posts

    4,045
  • Joined

  • Last visited

  • Days Won

    30

Everything posted by Volker Heine

  1. Hallo Reinhold, mit Deiner Frage bist Du hier im falschen Forum. Das passende Forum findest Du hier: Airport Inspector and Editor Volker
  2. Hello Yves, No, this is not possible. Volker
  3. Hallo Luis, Ist nicht Prepar3D kompatibel und das bleibt auch so. Gruß Volker
  4. Hello Frans, I have not found a post here in this forum that even describes your problem. I have also not received any emails on this subject. Have you thought about whether the problem could be the autopilot of the plane or a mistake by the pilot? Volker
  5. Hello Frans, If it were a problem with the FlightSim Commander, you would read about it here in the forum. If it worked flawlessly before, why should it stop working 24 hours later? Volker
  6. Hello Frans, as I have already written; The FlightSim Commander is not so intelligent that it independently makes any changes. If it were a problem with the FlightSim Commander, you would read about it here in the forum. So again the question of what has been changed in the meantime. I don't find a Beech Kingair BE80 as a standard aircraft in the FSX. I recommend reading the manual for this type of aircraft to see if there are any special settings for operating the autopilot. Volker
  7. Hello Frans, What has changed since yesterday? The FlightSim Commander is not so intelligent that it independently makes any changes that the user did not make. The AutoHeading function only works on aircraft that use the simulator's standard autopilot. (read also manual). Unfortunately, you have not listed the type of aircraft. Volker
  8. Your description of the situation leads me to ask you this question: Are you absolutely sure that you haven't swapped the monitors or their connections on the graphics card in the meantime? Run the FSCommander again and select Sid / Star / Trans windows one after the other. Close the FSCommander. Then send me the complete FSC subfolder /SUPPORT zipped to my email address. You can find my e-mail address here ... https://forum.simflight.com/topic/87556-important-information-information-importante-wichtige-information/
  9. I forgot to ask what has changed in the meantime. The FSCommander has no artificial intelligence and changes any settings independently. This also applies to any changes to the hardware. Unfortunately I cannot verify your problem. If the problem was caused by the FSCommander, there will certainly be the relevant postings here. I recommend the following attempt: Physically remove monitor 2 and restart the PC with only one monitor. Start the FSCommander again and then report the result here in the forum. Volker
  10. Hi, Please read here: https://forum.simflight.com/topic/60271-important-everyone-please-read/ Regards, Volker
  11. Hello Martin Did you read this announcement? https://forum.simflight.com/topic/88664-unable-to-load-vatsim-data-important-for-vatsim-users/ Regards, Volker
  12. Hello Ken, I am happy to hear that the tip was the solution. I will tell my friend that he is "a bright, smart head". Especially when the sun shines on him. Take care, Volker
  13. Hello Ken, a programmer around me, to whom I explained your problem, explained the following phenomenon to me. In very rare cases it can happen, if another program is started before or during the start of FSCommander, this other program occupies the window of FSCommander and does not release it again. Before uninstalling, I would try to start FSCommander as a first and only program before or after all other programs you need while flying. As a SimMarket customer, (not required for Aerosoft customers). make sure to save the Register.fsc file or since the file Register.fsc can not be replaced in case of loss, I recommend you to print the data of this file. In the MENU of the FlightSim Commander you can under About -> Register print the data of the file Register.fsc. I also recommend backing up the following files: \fsccolor.ini \fsc.ini \User\Blackbox User\Logbook.fsc User\aircraft.fsc User\BuddyIvao.fsc User\BuddyVatsim.fsc \Flightplan\FSC \Database\UserWP.txt \Database\UserObj.txt Best regards, Volker
  14. Hello Ken, I cannot verify your problem. None of the over 12,000 posts here in the forum report this problem. The intro window cannot be switched off by a parameter during the loading process. Best regards, Volker
  15. Hello Frans, What do you want to tell me with this title? Which format? ??? What is it and what do you mean by the text? ??? What have you changed since yesterday? The FSCommander is not so intelligent by changing something on its own. A precise, detailed description of the problem would be very helpful to me. Volker #stayathome
  16. Hello Taff, please read here... https://forum.simflight.com/topic/87365-flightsim-commander-10x-update-to-version-106-build-august-2019/ Regards, Volker
  17. Hello Vince, there is definitely no difference when registering the FSCommander on a server or client in a network. Please read the announcement and pay attention to the information regarding the installation as administrator. https://forum.simflight.com/topic/71602-important-information-on-registration-installation-and-use-of-fscommander/ Best regards, Volker
  18. Hello Vyacheslav, I cannot verify your problem. Please take a screenshot shortly before the error appears and one with the error messages. Send these both screenshots to my email address. You can read my address here. https://forum.simflight.com/topic/87556-important-information-information-importante-wichtige-information/ Best regards, Volker
  19. This information is not very helpful. Use the attached link and answer the questions in detail and precisely. Please also explain how the program behaves and which error messages appear!!! Regards Volker https://forum.simflight.com/topic/60271-important-everyone-please-read/
  20. Hallo Herr Land, ... und was wurde zwischenzeitlich geändert? Um Ihr Problem zu verifizieren benötige ich von Ihnen den kompletten Unterordner /Support des FSC. Bitte "packen" Sie diesen Ordner und senden ihn an meine e-mail Adresse. Meine Adresse finden Sie in diesem Beitrag: https://forum.simflight.com/topic/87556-important-information-information-importante-wichtige-information/ Fügen Sie der e-mail auch noch die Titel der AddOn Szenerien sowie die Hersteller bei. Beste Grüße Volker Heine
  21. Bonjour Olivier, Vous pouvez télécharger la dernière version de SimMarket sous votre compte et la réinstaller. Cordialement Volker Heine
  22. Hello Peter, How can I help you when there is so little information? Please read here: https://forum.simflight.com/topic/60271-important-everyone-please-read/ Send the airport file to my email address. You can find the address here: http://www.fscommander.de Regards, Volker
  23. Bonjour Olivier Je ne parle pas français et j'ai utilisé Google pour lire et répondre à votre message. Il est connu que les versions FSC 9.x ne prennent plus en charge P3D V4, x. L'utilisation de DBManager signifie que certains aéroports ne peuvent pas être lus. Cela sera signalé une fois le DBManager terminé. Tout ce que vous devez faire est d'utiliser une restauration de sauvegarde et votre problème est résolu. Une installation existante peut également être réalisée. Où le FlightSim Commander a-t-il été acheté? Cordialement Volker Heine
  24. Hello Ken, The files are currently valid real VORs and NDBs. It's binary data format that cannot be edited for copyright reasons. This data are part of the 28 day Airac Cycle. This Cycle can be purchased and is therefore always updated. However, if you have a current cycle and the navigation system is not displayed, you must notify the relevant provider. Best regards, Volker
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.