Jump to content
The simFlight Network Forums

baldomero

Members
  • Posts

    27
  • Joined

  • Last visited

Posts posted by baldomero

  1. Good evening:

    I have (had) in mi computer FSX, Prepar3D and X-P 10 with Windows-8.1. I have recently changed from Windows-8.1 to Windows-10.

    First surprise, FSX doesn`t work with W-10.  Some most wise (I'm not) are strugling with W-10 to make FSX working acceptably. 

    Secondly, I have looked Prepar3d v3 that I don't like too much, but... It works OK with W-10. I try to install FSUIPC  to customize the keys so as I use in X.Plane 10. But the momento I install FSUIPC 4 and try to start. I get after 5 minutes turning and turning the ring the  message: "The program stopped working correctloy because of a problem. Windows will close the programa and will notify  to you if a solution exists.".  Finally  I have deleted the content of the folder Modules ( result of loading FSUIPC) and everything works fine. So I  will fly without FSUIPC.   

    Some help? Thanks.

  2. More about it. I have found a folder with "Installing FSUIPC4" also FSUIPC4.DLL and other two files zipped. I unzipped all, then  I have copied the...DLL to the folder of Modules. Then I have tried to execute this "Installing FSUIPC4". After several lines indicating very quickly "It's not here..-" It's not there" a screen appears saying: "Although FSUIPC4 is installed, your registry is pointing to the wrong place for this Unknown installation. Now we know where it should be put, this problem can be corrected quite easily. Would you like this done for you now? Yes, No". I answer "YES". Then appears: "Problem:  cannot place FSUIPC4.DLL into the FS module folder. The error reported by Windows is: The system cannot find the specified route".

    And it is all. Thanks.

    My name really isn't Baldomero, but Alberto Moreno Gil.

  3. Thanks for your answer. In the folder Modules I have just appart from the files of Numpad Control a subfolder FSUIPC  Documents with the content you have mentioned. I haven't the others files: FSUIPC4.DLL, FSUIPC4.KEY, FSUIPC4.INI nor FSUIPC4.LOG nor here nor in any place in the computer. I bought FSUIPC in 08/29/2013  and have the invoice in front of me, No. 1038593. I have reinstalled FSUIPC4 recently entering the twelve letters - keys and have got the "OK Thanks for registering". What can I do? I am very happy with FSUIPC4, just have encountered this problem. Thanks.

  4. Thanks. After having downloaded the program (NpC, Numberpad Control) and put its different LUAs (about 10) in the folder FSX... Modules, near the files of FSUIPC, as is advised in the instructions, I start FSX, go to FSUIPC (on the upper line) , open it and go to KeyPresses in order to enter a key that sould start the program. But in the list of "Control sent when the key is pressed" don't appear none of the LUAs stored in the folder. A registered version of FSUIPC is necessary in order to a proper function of the program NpC, so is mine, but no LUA appears on the list. Can be a solution for this matter? Thank you and excuse my bad English.I live in Castilla - La Mancha (Spain) where Don Quijote was written, but not Richard III, nor even Macbeth, ha. Thanks, again.

  5. I haved downloaded recently the NpC (Numpad Control) application that has 12 LUAs. Its instalation appears very easy. Unzip a file putting its content in the folder "Modules" near the files of FSUIPC. Then, start FSX going to FSUIPC and entering a letter in order to activate de LUA number... that should appear on the displayed window.  But... none LUA appears in the list. I have read different comments in this forum and I must to say: my copy of FSUIPC is registered; I don't have nor FSUIPC.INI (my FSUIPC works perfectly) nor  I have filename.lua nor mapmad.lua. None of these file were in the zip file. What can I do? Many thanks.

  6. When doing an arc one must use many times  the knobs so in HSI as in VOR. My interest is getting a key whose function should be "Increase the knob in HSI one degree" and other key whose function should be "Increase the knob of VOR2 one degree". I have a joystick with 11 functions and I just use of them two: throttle and brakes. So in keyboard and in the joystick there is place for everything.  Surely among the possibilities of FSUIPC is to make what I'm looking for. Isn't it?
    Thanks.

  7. I have two computers. And installed in one of them this program firstly and when I tried to install it in the second I got the same message. You can remember that when you activate it a message is sent to the purchaser where remains the connection program -computer. So your case is the same as mine. In my case the reason is clear: one program just one computer, but in yours...If the PC became unusable, what to do?

  8. I have bought and installed  FSUIPC as well as Ultimate Checklist. Both are working OK. However it is rather difficult for me to read the checklist  in a transparence with red letters on a background somewhat dark. But I read now that the lists of Ultimate Checklist can be read in two different ways: 1st) checking every checklist item , or 2nd) from a transparence window etc and this one needs FSUIPC.  I am trying (and not getting really) use this second way. If I get using the first way it should be a great success. I ask: how can one use the first way: "checking every checklist item". As a fact I have seen in YouTube somebody using it but I don't know how to acces to this way. I would appreciate a lot your answer. I read in the Handbook "pressing the space -form" what I don't understand; I press the space-bar and nothing happens. What does mean "space-form". I suppose that it is a "lapsus calami" instedad of "press - space- from ..." . But in any case I cann't get it work in one line. Help!!! Thanks.

  9. Finally and after various adventures I got it all work. However there is a thing that the programmer could improve and the program would be more useful: make it more readable. It's very difficult to read the lists; I don't know if it is because of the red color of the letters or because of the background or both of them. In any case I can't put apart the sheets with the checklist as was my aim, and perhaps this of buyers of Ultimate Checklist. Is there any way of entering the program and changing the color of letters at least and that of the background?

    Regards.

  10. I thank you both, Ian and Andydigital for your help. Finally it works OK, not according to the book but works. "Desperado" for not getting to nowhere I gave up and put to search for another solution. I found "Checklist Manager (sponsored)". What has meant a quantity of adds and garbage into the PC that I couldn't manage. I had no other way that restore the PC to the date of yesterday. I forgot any idea of having a cheklist manager that workes. Basically I prefer the navigation than to "drive" a plane, so it is not so great a drama. Once restored the PC and clean of garbage I try once more to get Ultimate checklist / FSUIPC working. And it went / goes OK !!!. In a way somewhat funny, but it's the same, it works. Order 1 (Show / Hide), OK. Order 2 (move to next step) doesn't work. Order 3, moves to the next sub-procedure, Again to order 2, and the got step is shown. Again to order 3, and the following step is shown. Must be 3-2-3, since 3 and again 3 doesn't move forward. The PC doesn't hang. This night I'll sleep lucky.

    Thank you for your moral, I repeat. Otherwise I wouldn't try more.

  11. I have assigned different keys to the three orders, let's say: Q, K, R. (Also shift+1, shift2, shift+3). I always get the same:

    First order (show / hide the cheklist), works OK. Second order, (move one step), doesn't work

    ;appears the first sub-procedure but the following sub-procedure doesn't appear; always the first sub-procedure is shown. Third order (Check items), or advances one step and if i try again hangs the PC or directly hangs the PC."

    I have asked about this in FSUIPC forum and this is said:

     

    "This is not FSUIPC making the simulator hang, it must be whatever this addon Ultimate Checklist is doing when you send that key. I've still never heard of this addon and a quick Google search tells me its an application for Android devices, so I am still non the wiser. Like I've said repeatedly this hang and the app not working as expected can only be resolved by asking for support from the developer of Ultimate Checklist, it's highly unlikely that FSUIPC is hanging the sim."

    Someone knows how to make this work adecuately? Thanks.

  12. Thank you, Ian, for your help, but...It keeps being the same. Firstly I put 1, 2, 3 as keys, then a changed to letters Q, K, R and finally followed your advise and entered shift+1, shift+2, shift+3. Always I get the same:

    First order, Show / Hide, OK. Seconde order, doesn't advance. Third order, sometimes advances one step and if I try again hangs the PC or directly hangs the PC. I am just an economist and the interior of this program excedes largely my knowledge, so only can ask. Thank you.

    I get now your answer, Andydigital. I will try and contact with the developer. Thanks.

    Sorry for the "tray" instead of "try".

  13. Maybe; I have changed numbers for letters deleting their meaning previously in FSX configuration to avoid any conflict between them (I don't know what is "stronger", the order in FSX or the order in FSUIPC). It keeps being the same: order 1 or "Q" Show / Hide, fine; order 2 or "k" Advance one step, doesn't advance; order 3 or "R" Check items, advances one step and hangs the PC.

    Just one thing is clear: I have lost my money. Marvellous / wunderbar / превосходный.

    Thank you.

  14. Thanks for your answer. I could copy the answer of the "father" of Ultimate saying that I should consult my problem in the forum of FSUIPC with Pete Dowson. But putting it apart, the fact is that I have entered in FSUIPC, Key presses, that key "1" should "Show /Hide the checklist", that order "2" should "Move to the next sub-procedure" and that order "3" should "Check items", however order "1" works correctly, order "2" just gives one step and order "3" hangs the PC. It's no matter who solves the problem, but whom should I adress but to the person more knows of the program? Any help will be wellcome. . I will try changing 1, 2 and 3 for letters, in case the numbers could mean some problem. Thanks.

  15. Following a way somewhat different from that that is in the Handbook I have got the program to almost-work:

    1) Open FSX

    2) Open Ultimate Cheklist and choose the aircraft

    3) I begin flying.

    "Show / Hide" works OK

    "Move to next sub-procedure", also works, but since every checklist is divided into procedures and sub-procedures, it means that only gives a jump (from the first procedure to the first sub-procedure) and no more. Unless I change every procedure in sub-procedures and see if the program jumps from sub-procedure to sub-procedure.

    "Check items doesn't work at all. And the PC stops. I need to restart is.

    Tomorrow, more.

  16. Struggling with this matter I think that I am close to a solution, but...

    I have instaled FSUIPC (that appears on the screen of FSX) where I have assigned the keys "1", "2" and "3" from the normal keyboard, not the numeric. OK. But when I enter FSX and I press 1, or 2, or 3 scarcely two times has appeared a list not changing to the following nor coming back to the previous. I see something that can have some meaning: when in Ultimate Checklist press "Link with FSX" or something like this (at the bottom right) sometimes this field is green (almost always) and others changes to red saying "Press to disconect" (I think that when red is when has worked. Can you help me in any way? I ask: what appears on page 14 of instructions on the right also must be entered? But these fields  don't admit, at least for me, such as alt+A. Thanks..

  17. After having repeated once and again the instalation of FSUIPC  (registered as every program: Ultimate, FSUIPC and FSX) and following the advises (copy fsuipc.dll from Ultimate Checklist to the modules folder of the Fligh Simulator folder and starting FSX) I find that FSUIPC in FSX doesn't allow me making any change, it doesn't save it. Then I see that the file FSUIPC4.INI is not created however I repeat the download and instalation of FSUIPC. Furthermore I don't find in the list of orders to be "shortened" "Show / Hide checklist inside Flight simulator". that is really my aim in buying these programs.  Please, what can I do to a) create FSUIPC4.INI and b)  make present in the list of orders this of "Show / Hide checklist inside Flight simulator"? For me it's enough to get the .INI file that I suppose it is the problem. I have Windows 7 Achilles said that perhaps I have a very strong defence that makes impossible to create the .INI file. I have put off every protection and it is the same. Thank you.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.